Professional Documents
Culture Documents
Metallographic Metallography Microscope
Metallographic Metallography Microscope
Metallographic Metallography Microscope
E-500S
E-500S Inverted metallurgical microscope is equipped excellent UIS optical system and
modularization function design so that update system expediently and achieved polarization, dark
field observation.
Compact and steady main frame body is embodiment for the shock resistance. The ideal
ergonomic design is adopted in this unit and has easier operation and wider space. This is ideal
optical instrument for micro observation in metallographic structure and surface morphology. It is
Technical Parameter:
Model E-500S
10X wide field plan eyepiece and field of view number is Φ22mm,
Eyepiece
the eyepiece interface is Ф30mm
PL L10X/0.25 working distance: 20.2 mm
Bright Field PL L20X/0.40 working distance: 8.80 mm
Objective PL L50X/0.70 working distance: 3.68 mm
PL L100X/0.85 (dry) working distance: 0.40 mm
Hinged binocular tube, with an observation angle of 45°,
Eyepiece tube
and a pupil distance of 53-75mm
Focusing Coaxial coarse/fine focus, with tension adjustable and up stop minimum division
system of fine focusing is 2μm
Nosepiece Quintuple (Backward ball bearing inner locating)
Mechanical stage overall size: 242mmX200mm and moving range : 30mmX30mm.
Stage Rotundity and rotatable stage size: maximal measurement is Ф130mm and
minimal clear aperture is less
6V30W halogen and brightness enable control.
Illumination Integrated field diaphragm, aperture diaphragm and puller type polarizer.
Equipped with frosted glass and filters
Polarizing set Analyser can be rotatable and both polarizer and analyser can be move light path
Filter Blue, green, yellow
Indoor
Altitude: 2000m Max.
Temperature: 5℃-40℃ (41℉-104℉)
Operation Humidity: 80% for 31℃ (88℉)
Environment 70% for 34℃ (93℉)
60% for 37℃ (99℉)
50% for 40℃ (104℉)
Pollution: 2 (Refer to IEC664)
Aperture Diaphragm
When use low magnification objective, adjust the aperture diaphragm bigger, use high
magnification objective, adjust the aperture diaphragm smaller.
Introduction
This software can be used with a variety of metallographic microscope to complete the
metallographic image acquisition, processing, analysis, report generation and other functions; also
have to view the library, geometric measurement, fixed-fold printing, image stitching, image
contrast, confocal ), Three-dimensional light maps and other functions. Compared with the
traditional manual method, the sample software for metallographic image analysis, with the
following advantages:
save the traditional darkroom camera system, directly with a digital camera to take pictures,
can be compared on the computer map and standard query, do not read the standard books.
can be quickly and accurately automatically calculate the various types of microstructure of
the perimeter, area, long axis, short axis, equivalent circle diameter,
Aspect ratio, area percentage and other geometric shape parameters, than the previous
quantitative metallographic standards can be applied to automatically calculate the level, the
can automatically generate the electronic document inspection report, the report can be
The whole inspection process is complete on the computer, to achieve office paperless,
(Software toolbar)
I Metallographic analysis::
The software includes eight major categories, more than 100 inspection standards (including
GB, JB, QC / T, NJ, DL, YB, TB / T, ISO, ASTM, JIS, etc.), more than 600 metallographic image analysis
module, The standards covered are:
commonly used: including grain size, non-metallic inclusions, decarburization layer,
quantitative metallographic, phase area analysis.
cast iron: including ductile iron, gray cast iron, vermicular graphite cast iron analysis.
steel: including stainless steel, tool steel, all kinds of carbon steel, all kinds of alloy steel
analysis.
Non-ferrous metals and alloys: including aluminum alloy, magnesium alloy, copper alloy,
titanium alloy analysis.
vehicles and engines: all types of vehicles, gears, engine and accessories analysis.
power industry standards.
Other: There are powder metallurgy, metallography teaching.
ASTM, DIN, JIS and other foreign standards.
Analysis process is as follows:
1, the module selection: select the need to analyze the metallographic module.
2, comparative rating: the collected metallographic picture, and the library in the standard map to
compare, manually determine the level.
3, automatic rating: the software automatically calculates the perimeter, area, long axis, short axis,
equivalent circle diameter, aspect ratio, phase area
Percentage and other geometric shape parameters, and then apply the level calculation formula,
calculate the level. Only the metallographic standard with the level of the formula, can do
automatic rating.
4, generate reports: the rating is complete, you can generate illustrations of the test report, the
report can be printed directly, can also be saved as the report can be saved as WORD, EXCEL, PDF
documents.
5, the typical metallographic module:
Determination of average grain size of metal (area method):
(Before splicing)
(After splicing)
VI Image comparison:
The image file can be loaded into the software image database, and the left window to open the
right to load other images for image comparison:
E: sales@hiebp.com www.hiebp.com
Add.: 56-57 Multiple-use Building, Danshan Industrial Zone, Wenling City, China