Professional Documents
Culture Documents
Products Affected / Serial Numbers Affected
Products Affected / Serial Numbers Affected
pdf
Date: 03-18-09
SUBJECT:
New Flywheels
This Technical Publication has been revised to include additional affected serial number information
and flywheel details.
GENERAL:
This Technical Publication is to inform the Field that new Flywheels are released and assigned new part
numbers.
DETAILS:
The imagePRESS C1 Flywheels are updated to minimize 4 mm Pitch Lines on images. Previously, the
Flywheels were not assigned a part number. However, with this update, a part number has been created.
Uneven rotation due to insufficient inertia of the flywheel (FC8-6457) [1] may cause uneven density bands on
the image in the cross feed direction at 4mm intervals.
THIS TECHNICAL PUBLICATION IS THE PROPERTY OF CANON U.S.A. INC. AND CONTAINS CONFIDENTIAL INFORMATION OWNED BY OR LICENSED TO,
CANON U.S.A., AUTHORIZED CANON U.S.A., DEALERS MAY USE THIS TECHNICAL PUBLICATION FOR REFERENCE PURPOSES ONLY. ANY OTHER USE
BY AN AUTHORIZED CANON USA DEALER, OR USE BY ANY THIRD PARTY, IS PROHIBITED.
For additional technical information, please visit the Canon Systems and Technical Support Division website at: Page 1 of 3
www.support.cusa.canon.com. You can also call the Technical Support Center at 1-800-528-2830 or contact your Regional Support Office.
e-Support Filename: TP08 356a.pdf
Date: 03-18-09
SERVICING:
If the symptom is displayed, please, replace both Flywheels simultaneously with the new parts described
below.
Factory Measure:
To prevent uneven density on the image, the shape of the flywheel (FC8-6457) [1] is changed (P-2) to
improve its inertia for smooth rotation.
Accordingly, the shape of the flywheel (FC8-6465) [2] is changed (P-3).
Service Work:
If uneven density bands at 4mm intervals are present on the image in the cross feed direction, please,
replace simultaneously the old style Flywheels with the new style.
Page 2 of 3
e-Support Filename: TP08 356a.pdf
Date: 03-18-09
SERVICE PARTS:
FC8-6465-000
FC8-6457-000
Page 3 of 3