Professional Documents
Culture Documents
3508B 1050 BHP Brating Spec PDF
3508B 1050 BHP Brating Spec PDF
3508B 1050 BHP Brating Spec PDF
MARINE PROPULSION
SPECIFICATIONS
V-8, 4-Stroke-Cycle-Diesel
Displacement....................................... 69.06 L (4,214.3 in3)
Rated Engine Speed....................................................1800
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Aspiration................................... Turbocharged-Aftercooled
Governor.............................................................. Electronic
Cooling System.......................................... Heat Exchanger
Weight, Net Dry (approx.).................... 5,996 kg (13,219 lb)
Refill Capacity
Cooling System................................102.7 L (27.1 Gal)
Lube Oil System............................... 219.6 L (58.0 gal)
Oil Change Interval.................................................. 500 hrs
Caterpillar Diesel Engine Oil 10W30 or 15W40
Image shown may not reflect Standard Sump Oil Pan
actual Engine Rotation (from flywheel end).................... Counterclockwise
Flywheel and Flywheel Housing.........................SAE NO. 0
Flywheel Teeth...............................................................151
PERFORMANCE CURVES
Metric
Zone 3 Curve 3
1800 783 4154 206.5 192.7 1800 783 4154 206.5 192.7
1500 783 4985 199.1 185.9 1500 783 4985 199.1 185.9
1300 679 4988 198.5 160.7 1300 679 4988 198.5 160.7
1100 326 2830 211.6 82.2 1100 378 3281 212.3 95.7
900 228 2419 225.2 61.2 900 244 2589 227.3 66.1
650 129 1895 243.4 37.4 650 138 2027 245.6 40.4
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
PERFORMANCE CURVES
English
Zone 3 Curve 3
1800 1050 3064 .339 50.9 1800 1050 3064 .339 50.9
1500 1050 3677 .327 49.1 1500 1050 3677 .327 49.1
1300 911 3679 .326 42.5 1300 911 3679 .326 42.5
1100 437 2087 .348 21.7 1100 507 2420 .349 25.3
900 306 1784 .370 16.2 900 327 1910 .374 17.5
650 173 1398 .400 9.9 650 185 1495 .404 10.7
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is
only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary
according to the particular application of the engine and operating conditions beyond Caterpillar's control.
Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power
rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft
power.
DIMENSIONS
Engine Dimensions
(1) Length to Flywheel Housing 2117.3 mm 83.36 in
(2) Width 1703.0 mm 67.05 in
(3) Height 1821.0 mm 71.69 in
Weight, Net Dry (approx) 5996 kg 13,219 lb