Download as pdf or txt
Download as pdf or txt
You are on page 1of 25

Lab ID: GCS-TR-94-40227-006

Date: 11.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross

.
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date oftest: 10.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guage size aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)

63 so W1 0 23.90 w1 ·o -- x1 0
so 40 W2 0 27.00 w2 0 81.00 x2 0
/ 40 2S W3 0 19.50 w3 0 S8.00 x3 0
32 2S W4 0 16.9S w4 0 -- x4 0
2S 20 ws 2S62 13.SO wS 23S 40.50 xS 1S4
20 16 W6 1653 10.80 w6 216 32.40 x6 135
16 13 W7 8S4 8.5S w7 13S 2S.SO x7 19S
13
10
10
6
W8
W9
462
263
6.7S
4.89
w8
w9
169
63
20.20
14.70
x8
x9
142

69
-
1 ~u\ta 11
Flakiness Index: 14.12% /, ~
~ j Quality )"'cv
0
Elongation Index:
Combined Flakiness & Elongation Index:
12.00%
26.11%
!' Certified
0 ~
<
Comments: 0~ "'.

Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete is 30%.Vide table 500-17 of -*
MORTH Specification.
For Mls. Gooly Consultancy ServiCeS

~
Prepared by

Sushma {).. . _.l Technical Manager


~4
@@§XbW~~Li~~§§
~@Jm1~~~~·

Lab ID: GCS-TR-94-40227-006


Date: 11.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date oftest: 10.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guagesize aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)

63 50 W1 0 23.90 w1 0 -- x1 0
50 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 W5 2682 13.50 w5 239 40.50 x5 159
20 16 W6 1746 10.80 wG 205 32.40 x6 152
16 13 W7 986 8.55 w7 146 25.50 x7 178
13 10 W8 682 6.75 w8 152 20.20 x8 136
10 6 W9 496 4.89 w9 96 14.70 x9 95 /-
~ c:,u\ta!J
Flakiness Index: 12.71%
0
<" c:t.(/)
Elongation Index: 10.92% (J Quality <'>
Combined Flakiness & Elongation Index: 23.63% ( ~ Certified ~
Comments: 0 'IJf)

Max. allowable Combmed Flakmess and Elongation Index for B1tummous Concrete 1s 30%.VIde table 500-17 of
~ * ~
MORTH Specification. For Mli. Gooly Consultancy SeNJces
Prepared by r-y'( ---
Sushma Technic~ger
~ .J Technical Manager

~~
0 ~ ~m;~.r.::5 t,<l-acdJrrl~~.
(o;,~da5t :J'I?rl)
: dor\9J~d" ~a5;:irlt1 ;:.:"dO~
~~~~~~
@(Q@[6'l{~[S1F~~~.
D ~~amJ~~~,i

LabiD: GCS-TR-94-40227-006
Date: 11.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 10.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guagesize aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)
63 so W1 0 23.90 w1 0 -- x1 0
so 40 W2 0 27.00 w2
'
0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
2S 20 ws 2693 13.50 w5 2S6 40.50 xS 135

I I 20 16 W6 1728 10.80 w6 214 32.40 x6 10S


16 13 W7 896 8.SS w7 152 2S.SO x7 142
13 10 W8 693 6.7S w8 16S 20.20 x8 114
10 6 W9 489 4.89 w9 106 14.70 x9 109
Flakiness Index: 13.74%
Elongation Index: 9.31%
Combined Flakiness & Elongation Index: 23.05%
Comments:
Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete is 30%.Vide table 500-17 of
MORTH Specification.
ForMis~Servlces
Prepared by
Sushma Tee;~
Technical Managar
labiD: GCS-TR-94-40227 -006
Date: 11.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Aspha)ting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 10.03.2014

Size of Aggregates Weight of Fraction Thickness Weight' of Length Weight of


Passing Retained consisting of atleast guagesize aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)
63 50 W1 0 23.90 w1 0 -- x1 0
50 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 W5 2569 13.50 w5 285 40.50 x5 162
20 16 W6 1842 10.80 w6 235 32.40 x6 118
16 13 W7 968 8.55 w7 164 25.50 x7 165
13 10 W8 895 6.75 w8 184 20.20 x8 134
10 6 W9 563 4.89 w9 113 14.70 x9 119 v.tt;;
Flakiness Index: 14.35% ~~r,\l I)'J.
0 cJ'
Elongation Index: 10.21%
f ~( Quality } ct
Combined Flakiness & Elongation Index: 24.56% ?:0 Certified ~1
, ....
Comments: 0~ q/11
Max. allowable Combmed Flakmess and Elongation Index for B1tum1nous Concrete IS 30%.VIde table 500 17 of
MORTH Specification.
- -*
For Mls.
Prepared by

Sushma (,J J. Technical Manager

~ ~~o:!J~ ~oJ, ·~i:le)fi e?poj)o~r){)~


d~ ~~~~~r<;"!: ;(<)oo:$~;:rf~'), rt;;rr::d:Zr:~ c:JZJdli)
,.A • ' I
LabiD: GCS-TR-94-40227-006
Date: 11.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circlet~ Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 10.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guagesize aggregate in guage aggregate in
through IS on IS
200 pieces (gm) (mm) each fraction size each fraction
passing (mm) retained on
sieve (mm) sieve
thickness guage length guage
(mm)
(gm) (gm)

63 50 W1 0 23.90 w1 0 -- x1 0
50 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 W5 2615 13.50 w5 256 40.50 x5 182
20 16 W6 1942 10.80 w6 249 32.40 x6 356
16 13 W7 1652 8.55 w7 182 25.50 x7 142
13
10
10
6
W8
W9
1352
1065
11.35%
6.75
4.89
w8
w9
139
153
20.20
14.70
x8
x9
263

125
(,~ <:-c_,
-
V~\taf)
".t-
Flakiness Index:
0 tP
Elongation Index: 12.38% CJ Quality ~ )
Combined Flakiness & Elongation Index: 23.73% ~ Certified ;;
0 t)•
Comments: 0~ e,'l>

Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete IS 30%.Vide table 500-17 of -*
MORTH Specification. For Mfi. Gooly ConsultMcy Services

::::::db~y ~Technical Manager

-~
@@@CbW~Cblf~~~
~-~~~~

Lab ID: GCS-TR-94-40227-006


31
Date: 12.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation) ·
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 11.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing consisting of atleast guagesize aggregat~ in guage aggregate in
Retained
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)

63 so W1 0 23.90 w1 0 -- x1 0
so 40 W2 0 27.00 w2 0 81.00 x2 0
40 2S W3 0 19.SO w3 0 S8.00 x3 0
32 2S W4 0 16.9S w4 0 -- x4 0
2S 20 ws 2S31 13.SO ws 24S 40.50 xS 169
20 16 W6 186S 10.80 w6 218 32.40 x6 326
16 13 W7 19S2 8.5S w7 186 2S.SO x7 1S8
13 10 W8 1S62 6.7S w8 1S2 20.20 x8 2S9
10 6 W9 132S 4.89 w9 169 14.70 x9 13S
Flakiness Index: 10.50%
Elongation Index: 11.34%
Combined Flakiness & Elongation Index: 21.84%
Comments:
Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete is 30%.Vide table S00-17 of
MORTH Specification.
For Mfs. ~uttancy Sel'\'tces
Prepared by
Tech~
Susbota ~ .! . Technical ManasJct
~

0
~w~~Li~~~
~@ljl@J~~~~

LabiD: GCS-TR-94-40227-006
· Date: 12.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 11.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing . Retained consisting of atleast guagesize aggregate in guage aggregate in
through IS on IS . 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)
63 so W1 0 23.90 w1 0 -- x1 0
so 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 W5 2536 13.50 w5 205 40.50 x5 158
20 16 W6 1862 10.80 w6 235 32.40 x6 296
16 13 W7 1562 8.55 w7 182 25.50 x7 154
13 10 W8 1542 6.7S w8 153 20.20 x8 263
10 6 W9 1639 4.89 w9 164 14.70 x9 152
'
Flakiness Index: 10.27%
Elongation Index: 11.19%
Combined Flakiness & Elongation Index: 21.46%
Comments:

MORTH Specification.

Prepared by For M/s~Sevvlt:'f~.$

Sushma Technical Manager

Technical Manager
LabiD: GCS-TR-94-40227 -006
33
Date: 12.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
I
Adress: · Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asp halting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 11.03.2014

Size of Aggregates Weight of Fraction Thickness Weighfof Length Weight of


Passing consisting of atleast guagesize aggregate in guage aggregate in
Retained
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
thickness guage length guage
(mm)
(gm) (gm)

63 so W1 0 23.90 w1 0 -- x1 0
50 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 ws 2358 13.50 w5 218 40.50 xs 168
20 16 W6 1946 10.80 w6 320 32.40 x6 306
16 13 W7 1642 8.55 w7 169 25.50 x7 164
13 10 W8 1539 6.75 w8 105 20.20 x8 285
x9 169

/.f3"'u-a,
10 6 W9 1256 4.89 w9 146 14.70
Flakiness Index: 10.96%
Elongation Index:
Combined Flakiness & Elongation Index:
Comments:
12.49%
23.45%

Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete is 30%.Vide table 500·17 of
..
()

~0 g "'
"
-*
} tO

'lit)
(t
~
MORTH Spec1f1cat1on .

Prepared by
Sushma
Technical Manager
~~00~
d;'~ ~. r~t\t1-'<I'JJ ~~~cj)f;·~··~\ (~;;~dtZ~ ~?,r.)rl)
.·o~g
.~~~ =~=~
sW!lil~£1llll~!l!.tM3liiiJIMl;Fl~CID(1l;ll~·
lm>\\1!100 U1A!m•W!Iil
~-;._..;;;;;;__ _ _,.,.,...,.,'-~~~-~...-'-~ ' ' ' ' '''!...- - - - - - -

labiD: GCS-TR-94-40227-006
Date: 12.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: , Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date oftest: 11.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guage size aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)

63 50 W1 0 23.90 w1 0 -- x1 0
SO 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 WS 2635 13.50 wS 215 40.50 xS 152
20 16 W6 1956 10.80 w6 265 32.40 x6 326
16 13 W7 1862 8.55 w7 196 25.50 x7 159
13 10 W8 1653 6.75 w8 165 20.20 x8 251
10 6 W9 1542 4.89 w9 182 14.70 x9 156 .L~-"" - t
~------~----~-----~----~------~--~----~----~--~--~,-~u 1 a~
Flakiness Index: 10.60% /, '?~ ':t.
Elongation Index: 10.82% CJ Quality ~
Combined Flakiness & Elongation Index: 21.42% ~ Certified ~
0 .....
Comments: ~ ~~"
Max. allowable Combmed Flakmess and Elongat1on Index for B1tummous Concrete IS 30%.VIde table 500-17 of *-
MORTH Specification. For Mm. GOQfy Consubncy Services
Prepared by
Sushma
?1
Technica~
'
Technical Manager

dt ..1J
ti;.."<~e)tSJiJ:J!
1
x;·:;oo:::;;::J:.:, u::;;;;:Jo5~
· \-
D<J~i~)
I

w'-'35~ tSorl;'J~~cb ;i2 ,'~~~. ,;:-\~~ c:rr:<J5


Lab 10: GCS-TR-94-40227-006
Date: 12.03.2014

TEST RESULTS OF AGREGATE SHAPE TEST


(Flakiness & Elongation)
IS: 2386 Part I
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads in
Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date oftest: 11.03.2014

Size of Aggregates Weight of Fraction Thickness Weight of Length Weight of


Passing Retained consisting of atleast guage size aggregate in guage aggregate in
through IS on IS 200 pieces (gm) (mm) each fraction size each fraction
sieve (mm) sieve passing (mm) retained on
(mm) thickness guage length guage
(gm) (gm)
63 so W1 0 23.90 w1 0 -- x1 0
so 40 W2 0 27.00 w2 0 81.00 x2 0
40 25 W3 0 19.50 w3 0 58.00 x3 0
32 25 W4 0 16.95 w4 0 -- x4 0
25 20 W5 2652 13.50 w5 235 40.50 x5 153
20 16 W6 2105 10.80 w6 325 32.40 x6 286
16 13 W7 1862 8.55 w7 189 25.50 x7 1S2
13 10 W8 1653 6.75 w8 125 20.20 x8 267
10
Flakiness Index:
6 W9 13S9
10.82%
4.89 w9 168 14.70 x9 195

~~ulta/J
-
Elongation Index: 10.93%
<' c:.t.
uo,.
ua rty tP
(I)
Combined Flakiness & Elongation Index: 21.75% ~

00 Certified ~
Comments: .....
-D ~'3()
Max. allowable Combined Flakiness and Elongation Index for Bituminous Concrete is 30%.Vide table S00-17 of
MORTH Specification. -*
ForM~1ces
Prepared by
Sushma Technical Manager
Technical Manager
\.

Lab ID: GCS-TR-94-40227 -006


Date: 14.03.2014

TEST RESULTS OF STRIPPING VALUE OF ROAD AGGREGATES


(STATIC IMMERSION TEST)
IS: 6241

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6} selected arterial
and sub arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore

Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013


Work Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 13.03.2014
Type of binder: 60/70
Percentage of binder used: 4.8% by wt.
Total weight of aggregate: 200 g
Total weight of binder: 9. 7 g
Temperature of water-bath: 40° c

Observation Number Stripping% Average% Average Retained


(
Coating%
1 4
2 3 4.00 96.00
3 5
Comments:
-7 Minimum allowable Aggregate retained coating for Bituminous Concrete is 95% Table No-500.17
Note:
This test report should not be reproduced except in full, without written approval of the laboratory
The results indicated above are based on the tests carried out on the samples collected by the laboratory
Any Query regarding the report must be reported immediately

For Mfa~cy 5ervtceo


Prepared by
Sushma Technical Manager
Technical Manager

~~~ Oi:;Cf'J ~-:')~ e:~z~oj:>o3CG;;


d:e~
~~~~

::};6'o3)nl<{.), (wt;;;!;J:$r;,.v ~~~rl)
t.1I) 1.~ :JorN.~t.t .ta:J;Siid ~~B
-~-=----·--------------·~"""'-q"-~clOTi~;(t.l!'b~.
~~~~~~
111!)~ 8W!B~~m:::1l11~~<IDI:l§DII[OJJIJ5g U~o~

lab ID:
Date:
GCS-TR-94-40227-006 31
15.03.2014

TEST RESULTS OF STRIPPING VALUE OF ROAD AGGREGATES


(STATIC IMMERSION TEST)
IS: 6241

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asp halting of Six(6) selected arterial
and sub arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore

Work Order No: EE/RI-D.halli/Wo/09/13-14 . Dated:20.12.2013


Work Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 14.03.2014

Type of binder: 60/70


Percentage of binder used: 4.8% by wt.
Total weight of aggregate: 200 g
Total weight of binder: 9.7 g
Temperature of water-bath: 40° c

Observation Number Stripping o/o Average o/o Average Retained


Coating o/o
1 4
2 3 3.33 96.67
3 3
Comments:
-7 Minimum allowable Aggregate retained coating for Bituminous Concrete is 95% Table No-500.17
,,~:,~t]n
.

~\~'
·(' '(.,),
Note: . .
• (..:1\

~)
This test report should not be reproduced except in full, without written approval of the laboratory 1
"'" Quaiity \ll
The results indicated above are based on the tests carried out on the samples collected by the laboratory Certified
0 ~.

Any Query regarding the report must be reported immediately


\~

Prepared by
· Sushma anager
T~nicat Manager

~~
d"!. ~~r;~,r.;~ 7-~l-&o::;~·ri"/), (wui~d:::~ ~~'d11)
~@In@}~~~~
lm>~ s&rr!ID~fJIDlill.~~CIDI:.w~oU~omrf0
.··~~-.;,.;;.__:/:..:L!:t.:.." ."1\ '- ~ ~- fjk"" '1~~ ··-~;c,..,;.,;;.''Jt~~-·""-'-'-----'-----------....... --------'1-------
LABJD: GCS-TR-94-40227 -006
Date: 11.03.2014

SPECIFIC GRAVITY AND WATER ABSORPTION TEST


IS: 2386 Part Ill
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial
roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Job Code No: 304-14-000109
Type of Mix Bituminous Concrete
Date of Testing 10.03.2014

Sl. Details Notation Test Number Mean Value


No. Test 1 Test2
Weight of aggregate suspended in
1 water with the basket W1g 2030 2032

Weight of basket suspended in


2 water W2g 750 750

Weight of saturated aggregate in


3 water (W1 - W2) = Ws g 1280 1282

Weight of saturated surface dry


4 aggregate in air W3g 2042 2038

Weight of water equal to the


5 volume of the aggregate (W3-WS)g 762 756

Weight of oven dried aggregate


6 W4g 2035 2030

7
Specific Gravity
W4/(W3-WS) 2.67 2.69 2.68 -
c:,\.11ta 11
Apparent Specific gravity
o<' ~
8 W4/(W4-WS) 2.70 2.71 2.70 (.) 0 ,. tl)
>. ua rty co 1
00 Certified ~
Water Absorption ((W3-W4)*100)/ ....
9
W4
0.34 0.39 0.37 ~ CJ0f)

Comments: *
-7 Maximum allowable Aggregate Water absorption value for Bituminous Concrete is 2.0% Table 500.17 of Morth
For Mia. -~ S,onsultancy Serv1res
Prepared by · / ~
Sushma Technical Manager
Technical Manager

t'J~ ~e)~~ \,V~Q~)frt~}J, (m::::da5t ~~rl)


-------..- ...J:)~~~~~ tSori~~?~(~t1w.al_____.......---.......-...---
·-~~~
n.=-·-·----·--·-....________~--------------------------''~-----
Lab ID: GCS-TR-94-40227-006
Date: 11.0302014

TEST RESULTS OF AGGREGATE GRADATION TEST

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division,OBBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads
in Dasarahalli Zone

Name of Road: Improvement and asphalting of SoM road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-Dohalli/Wo/09/13-14 Dated:20o12o2013
Job Code No: 304-14-000109
Sample Identification: Bituminous Concrete Grade II
Date of test: 1000302014

TOTAL WEIGHT OF SAMPLE: 5000 grams


Sieve Size (mm) Weight %Retained Cumulative %Passing Requirements Remarks
Retained %Retained
(gm)
19o00 OoOO OoOO OoOO 100o00 100o00
13.20 529 10o58 10o58 0 89o42 79-100
9o50 457 9o14 19072 80o28 70-88 Gradation
satisfies·
4o75 957 19o14 38o86 61.14 53-71
Bituminous
2036 714 14028 53o14 46o86 42-58
concrete Grade-
1.18 498 9o96 63o10 36o90 34-48
II specification
Oo60 289 5o78 68088 31.12 26-38 as per MORTH
Oo30 514 10028 79o16 20084 18-28 Table 500o18
0015 358 7o16 86o32 13.68 12-20
00075 298 5096 92028 7072 4-10

TOTAL WEIGHT OF SAMPLE· 5000 grams


Sieve Size (mm) Weight %Retained Cumulative %Passing Requirements Remarks
Retained %Retained
(gm)
19000 OoOO OoOO OoOO 100o00 100o00
13.20 548 10o96 10096 89.04 79-100 -
9o50 414 8o28 19024 80076 70-88 Gradation V:';oltaiJ
53-71 satisfies /, 0~ ".t.
4o75 965 19o30 38.54 61.46 (J'l
Bituminous ' ( ~ Quality ~
2o36 821 16042 54096 45o04 42-58
concrete Grad~.;
°

1.18 515 10030 65026 34o74 34-48


II specificatio\ 0
~- Certified
,
2 1

Oo60 284 5o68 70094 29006 26-38


~~
as per MORTH
Oo30 435 8070 79064 20036 18-28 Table 500018
-
* c:,'<J
0015 358 7016 86080 13.20 12-20
00075 215 4o30 91.10 8090 4-10
For Ml;o Gooly Consultancy SeM09S

~
Prepared by
Sushma
Technical Manager
~@ljt@)~~UA®~
~\iillllsfm!9~eJIH:ll!.~~<m(:IID~gTI~gfi!l!1J
·'~---·· --:___ - -~-----'""------
Lab ID: GCS-TR-94-40227-006
Date: 14.03.2014

TEST RESULTS OF BITUMEN CONTENT & GRADATION


DETERMINATION OF BITUMINOUS CONCRETE
AASHTO T 164 & AASHTO T 30

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore -
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub
arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 13.03.2014

BITUMEN CONTENT DETERMINATION


Description Sample 1 Sample 2
1. Weight of Mixture before Test, gm 500 500
2. Weight of Mixture after Test, gm 474 474.5
- For Grade 2 Vide
3. Weight of Asphalt and Mineral matter Extracted, gm 26 25.5
Table 500.18
4. Weight of Mineral Matter, gm - - Bitumen
5. Weight of Ash, gm - - Content 5 to 7%
6. Weight of Bitumen Extracted, gm (corrected) 26 25.5
7. Bitumen content in% 5.2 5.1
Average 5.2

GRADATION AFTER EXTRACTION


TABLE 1
Sieve Size (mm) Percent Passing, % Requirements
asperMORTH
Sample 1 Sample 2
table 500.18

19 100 100 100


13.2 89.9 92.1 79-100
9.5 79.8 83.5 70-88
4.75 67.2 69.4 53-71
2.36 49.7 52.4 42-58
1.18 39.5 38.9 34-48
0.6 35.4 33.5 26-38
0.3 23.5 25.4 18-28
0.15 19.8 17.5 12-20
0.075 7.9 8.9 4-10

Prepared by
Sushma
Technical Manismr
Lab ID: GCS-TR-94-40227-006
Date: 15.03.2014

TEST RESULTS OF BITUMEN CONTENT & GRADATION


DETERMINATION OF BITUMINOUS CONCRETE
AASHTO T 164 & AASHTO T 30

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub
arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 14.03.2014

BITUMEN CONTENT DETERMINATION


Description Sample 1 Sample2
1. Weight of Mixture before Test, gm 500 500
2. Weight of Mixture after Test, gm 474.3 474.8
For Grade 2 Vide
3. Weight of Asphalt and Mineral matter Extracted, gm 25.7 25.2
Table 500.18
4. Weight of Mineral Matter, gm - - Bitumen
5. Weight of Ash, gm - - Content 5 to 7%
6. Weight of Bitumen Extracted, gm (corrected) 25.7 25.2
7. Bitumen content in % 5.14 5.04
Average 5.1

GRADATION AFTER EXTRACTION


TABLEt
Sieve Size (mm) Percent Passing, o/o Requirements
asperMORTH
Sample 1 Samplc2
table 500.18

19 100 100 100


13.2 89.3 90.2 79-100
9.5 78.5 79.3 70-88
4.75 68.1 70.5 53-71
2.36 49.6 51.6 42-58
1.18 38.2 39.6 34-48
0.6 36.8 35.1 26-38
0.3 26.4 24.3 18-28
0.15 16.1 15.6 12-20
0.075 6.3 7.6 4-10

ForM/s.~SeMoos
Prepared by
Sushma Technical Manager
~~~~~~
~eml18~~Q~~~C!EJI:IID~g~g~

Lab ID: GCS-TR-94-40227-006


Date: 16.03.2014

TEST RESULTS OF BITUMEN CONTENT & GRADATION


""'·
DETERMINATION OF BITUMINOUS CONCRETE
AASHTO T 164 & AASHTO T 30

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub
arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli cross
Contractor: KRIDL, Bangalore
Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Type of Mix: Bituminous Concrete
Date of test: 15.03.2014

BITUMEN CONTENT DETERMINATION


Description Sample 1 Sample2
1. Weight of Mixture before Test, gm 500 500
2. Weight of Mixture after Test, gm 473 474.2
For Grade 2 Vide
3. Weight of Asphalt and Mineral matter Extracted, gm 27 25.8
Table 500.18
4. Weight of Mineral Matter, gm - - Bitumen
5. Weight of Ash, gm - - Content 5 to 7%
6. Weight of Bitumen Extracted, gm {corrected) 27 25.8
7. Bitumen content in% 5.4 5.16
Average 5.3

GRADATION AFTER EXTRACTION


TABLE1
Sieve Size (mm) Percent Passing, % Requirements
asperMORTH
Sample 1 Sample2
table 500.18

19 100 100 100


13.2 91.2 90.8 79-100
9.5 82.3 80.5 70-88
4.75 69.5 70.3 53-71
2.36 50.5 52.4 42-58
1.18 39.1 40.6 34-48
0.6 35.9 36.5 26-38
0.3 27.1 25.4 18-28
0.15 15.6 16.7 12-20
O.Q75 5.6 6.9 4-10

Prepared by
Sushma
Lab ID: GCS-TR-94-40227-006
Date: 14.03.2014

TEST REPORT OF DETERMINATION OF RATE OF SPREAD


TACK COAT WITH BITUMEN EMULSION
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial
and sub arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli
cross

Contractor: KRIDL, Bangalore


Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Layer: ForBC
Date of test: 13.03.2014

Determination Unit Test No


1 2
Size of Plate (mxm) mt 0.45 0.45
Area of Plate (a) Sq.m 0.2025 0.2025
lntial Wt of empty Plate (b) Kg 1.309 1.315
Final weight of plate after
application of prime /Tack Coat ( Kg 1.360 1.367
c)
Weight of Prime/Tack Coat (d=c-
Kg 0.051 0.052
b)

Rate of spread of Prime/tack


kg/Sq.m 0.251 0.256
coat

Average kg/Sq.m 0.253


Specified Limit kg/Sq.m 0.25Kg/sq.m
Note:
This test report should not be reproduced except in full, without written approval of the laboratory
The results indicated above are based on the tests carried o~t on the samples collected by the laboratory
Any Query regarding the report must be reported immediately

For Mlrt. Goofy Consultancy Serv!OdS

~
Prepared by
Sushma
"

~~~~~~
IE®~ stw.ID~£:3~~~Cffi[;XID~a~affir!E,
/... .,- .,

Lab ID: GCS-TR-94-40227-006


Date: 15.03.2014

TEST REPORT OF DETERMINATION OF RATE OF SPREAD


TACK COAT WITH BITUMEN EMULSION

Client: Executive Engineer


Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial
and sub arterial roads in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahalli circle to Shettyhalli
cross

Contractor: KRIDL, Bangalore


Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Layer: For BC
Date of test: 14.03.2014

Determination Unit Test No


1 2
Size of Plate (mxm) mt 0.45 0.45
Area of Plate (a) Sq.m 0.2025 0.2025
lntial Wt of empty Plate (b) Kg 1.309 1.315
Final weight of plate after
application of prime /Tack Coat ( Kg 1.360 1.367
c)
Weight of Prime/Tack Coat (d=c-
Kg 0.051 0.052
b)
Rate of spread of Prime/tack
kg/Sq.m 0.251 0.254
coat
Average
Specified Limit
kg/Sq.m
kg/Sq.m
0.253
0.25Kg/sq.m -
ff\.ltta
11
~ ~ ~
This test report should not be reproduced except in full, without written approval of the laboratory ( ~ Quality ~·
The results indicated above are based on the tests carried out on the samples collected by the laboratory 00 Certified , ~•
Any Query regarding the report must be reported immediately ~ * q,0

For Mls. Goofy Consultancy 8oMoes

~
Prepared by
Sushma
Technical Manager
"

Lab ID: GCS-TR-94-40227-006


Date: 16.03.2014

TEST REPORT OF DETERMINATION OF RATE OF SPREAD


TACK COAT WITH BITUMEN EMULSION
Client: Executive Engineer
Adress: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial
and sub arterial roads in Dasarahalli Zone

Name of Road: Improvement and asp halting of S.M road from Jalahalli circle to Shettyhalli
cross

Contractor: KRIDL, Bangalore


Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013
Work Code No: 304-14-000109
Layer: ForBC
Date of test: 15.03.2014

Determination Unit Test No


1 2
Size of Plate (mxm) mt 0.45 0.45
Area of Plate (a) Sq.m 0.2025 0.2025
lntial Wt of empty Plate (b) Kg 1.305 1.315
Final weight of plate after
application of prime /Tack Coat ( Kg 1.358 1.367
c)
Weight of Prime/Tack Coat (d=c-
Kg 0.053 0.052
b)

Rate of spread of Prime/tack


kg/Sq.m 0.259 0.256
coat

Average
Specified Limit
kg/Sq.m
kg/Sq.m
0.258
0.25Kg/sq.m
-
14\lltal}
Note: (J
o" ':t.
Quality tl\
This test report should not be reproduced except in full, without written approval of the laboratory
The results indicated above are based on the tests carried out on the samples collected by the laboratory
-~

0
0
Certified
co
<
I)'·
~ ([,0
Any Query regarding the report must be reported immediately
-*
For M/s. Gooly Consultancy SeMces
Prepared by
Sushma
~
Technical Manager
Technical Manager

·r~··f
"w G..\:J r?-.rl.-1 ,.,..1·· ;."(-,-~:<·, .. ,,
..,;\.i/,t",..tJ~..r ""..-..a:; ... f!V
~,-;;; 'iS'
'"""~1....,
0
· .
.,...,___,.,_,._~"- ,......,.------132:~f.Jd;;- ut
~ ut#hi .!U~~~Ilim~®m~OOii~
~~W®mfila~~~~um1fw@1;11m•~ ~~~~r~rJtnmm
"
@©XQ)[b)J~[biJ~~~
~-~~~~ .
(F®e!IOO s&mm~es~~~®~:IIDWJEo~o~

Lab ID: GCS-TR-94-40227-006


Date: 23.03.2014

DENSITY OF BITUMINOUS LAYERS FOR BC

Client: Executive Engineer


Address: Road Infrastructure, Dasarahalli Division, BBMP, Bangalore
Project Name: Improvements, Strengthening and Asphalting of Six(6) selected arterial and sub arterial roads
in Dasarahalli Zone

Name of Road: Improvement and asphalting of S.M road from Jalahal\i circle to Shettyhal\i cross
Contractor: KRIDL, Bangalore

Work Order No: EE/RI-D.halli/Wo/09/13-14 Dated:20.12.2013

Job Code: 304-14-000109


Date of test: 22.03.2014 Required Thickness: DBM:SOmm BC: 40mm

Sl.No Chainage Location DBM DBM Bulk BC thickness BC Bulk


(meter} thickness in Density gjcc in mm Density gjcc
mm

1 760 (LHS) so 2.25 40 2.26

2 780 (CENTRE) 51 2.26 40 2.24

3 810 (RHS) so 2.24 40 2.26

4 836 (LHS) so 2.25 40 2.23

5 840 (CENTRE) so 2.26 41 2.25

870 (RHS) so 2.27 40 2.24

7 900 (LHS) so 2.28 40 2.28

8 930 (CENTRE) 51 2.26 40 2.26

9 945 (RHS) so 2.25 40 2.25

10 960 (LHS) 50 2.25 41 2.27

11 990 (CENTRE) so 2.24 40 2.28

12 1020 (RHS) so 2.26 40 2.23

13 1050 (LHS) so 2.28 40 2.25

14 1080 (CENTRE) 51 2.27 41 2.25

15 1110 (RHS) so 2.26 40 2.26

16 1140 (LHS) so 2.24 40 2.24

17 1170 (CENTRE) so 2.26 40 2.25

1_~;:-B_ :,__-:1::2o::o-t---:-(R_H-:-sJ_t-__s_o_~f---2._28:._-t-_-4o_ _j.-..;__2_.2_6_~


1
!/ :; ul t a11
1 1230
19 (LHS) SO 40 / 0 (\ CJ.
r--;~-t~~-r~==~--~--t-~2~.24~+-~~~~2~.2~3_j(0 .

l~~2;-0-~~12;26:;;-0--1~(C;EN~T~RE:.:_) +--:Sl~-t-~2.~26:_-f-_4~0~_J_-~2 .~2 S~J ~ CQuality ) ~


-:...__ __ --1.{_1_:29....:._o-lf~I:_RH~s!_J_~so~__.IL~~L~~l-~~ 0
21
ertified )
2.26 40 I 2.26 I 0 f)':
.tJ s0
*
~@JA@J~~~~
®!)~ g&!J.ill}~(;l~~~Cill~:IID~o UiUJli:1o&!J!fj
!!>

22 1320 (LHS) so 2.28 40 2.24

23 13SO (CENTRE) so 2.24 41 2.26

24 13S7 (RHS) so 2.26 40 2.2S

2S 1380 (LHS) so 2.24 40 2.26

26 1393 (CENTRE) 40 2.2S

27 1410 (RHS) 40 2.23

28 1440 (LHS) 40 2.2S

29 1470 (CENTRE) 41 2.27

30 1SOO (RHS) 40 2.26

31 1S30 (LHS) 40 2.2S

32 1S60 (CENTRE) 40 2.26

33 1S90 ' (RHS) 40 2.2S

34 1620 (LHS) 40 2.26

3S 16SO (CENTRE) 41 2.28

36 1680 (RHS) 40 2.26

37 1710 (LHS) 40 2.24

38 1740 (CENTRE) 41 2.26

39 1770 (RHS) 40 2.2S

40 1789 (LHS) 40 2.26

41 1796 (CENTRE) 41 2.28

42 1800 {RHS) 40 2.24

43 1830 (LHS) 40 2.26

44 1860 {CENTRE) 40 2.26

4S 1890 (RHS) 40 2.2S

46 1920 (LHS) _ _ 40 2.26 -


47 19so (cENTRE) 41 2.2s I ~ulta/1
~------~------+-----~---------+--------+-------+------~1,/o~~ ~
L __ _ _ 48____.L.-_1_9s_o__...~..-_l_R_Hs_J___JL...___ _ _
- ----l.---------L.---4....,.o__----~..___2_.2_4__--f ~ Quality ~
0 Certified ~
0
__
!)'
".:: ._ .....fie
*
Prepared by
Sushma Technical anager
Technical Manager

:rdm., >cJ>.L......-U'LJ

d~ ~~~~ · .;ui:':J:S::n1~1~, (1'.Jil~dCC:~ ~pt{)


w~~ ?.:lonr.1.rod.) w:~<Z;;:itld ~ileJ~
'2/ Q. tl don~~d) - 02.
• /

• •




••


• ~

• -·....


l•







••



'

You might also like