Professional Documents
Culture Documents
Valvulas Prince
Valvulas Prince
RDRS-150-16 RDRS-1950-16 1/2 NPTF 0-16 GPM These models have built in relief set at
1500 psi @ 10 GPM.
RDRS-175-30 RDRS-1975-30 3/4 NPTF 0-30 GPM
Special combinations of port size and controlled flow range are available in O E M quantities.
Please consult your sales representative.
SYMBOL CF EF CF EF
IN
RD-100 & IN RDRS-100 &
RD-1900 RDRS-1900
CATV 01-04-09-02
V54 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com • PHONE (605) 235-1220 • FAX (605) 235-1082
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (605) 217-6300
MODEL RD-100 AND
CONTROL FLOW PORT RD-1900
EXCESS FLOW PORT
CONTROL FLOW PORT
PARTS BREAKDOWN ANDEXCESS DIMENSIONS
FLOW PORT
1.75 670400005 .38 3.88 670300008
1.75 670400005 .38 670300008
MODEL RD-100 .88 .88 3.88 2.05
.88 CONTROL FLOW.88PORT 2.05 EXCESS FLOW PORT
190100018 .265 DIA (2)
190100018 .265 DIA (2)
1.75 .38 1.00 1.00 670300008 PART NUMBER WILL BE
670400005 240000912 3.88 PART NUMBER
.88 670400004
240000912 STAMPEDWILL BE LOCATION
IN THIS
4.13 670400004 .88 2.05 STAMPED IN THIS LOCATION
4.13 190100018 .265 DIA (2)
230005093
230005093 1.00 2.38 PART NUMBER WILL BE
240000912
670400004 2.38 STAMPED IN THIS LOCATION
4.13 670400006 671600002
670400006 671600002 671800010
230005093 ROTARY SPOOL RDRS MODEL 671800010
ROTARY SPOOL 671500004
2.38 RELIEF VALVE PARTS 671500004671800002
220000762 1.18 671800002
2.88
2.88 670400006
220000762 1.18 670801001 671600002
3.34 2.31 670801001 671800010
3.34 ROTARY SPOOL 2.31 5.00
.13 240000116 5.00 671500004
.13 240000116 INLET 671800002
240016072 220000762 INLET MAIN SPOOL
2.88
240016072 1.18 670801001 MAIN SPOOL
2.31 ADJUSMENT
3.34 ADJUSMENT
5.00 670300011SCREWSCREW
.13 240000116 670300011
230009014
671900001
INLET 671900001
240016072 MAIN SPOOL 230009014
ADJUSMENT
670300011 SCREW
MODEL RD-1900 670300008 230009014
671900001
1.75 CONTROL FLOW PORT670300008 EXCESS FLOW
1.75 CONTROL FLOW PORT EXCESS FLOW
PORT
.88 .38
.88 670400005 3.88 PORT
670400005 .38 3.88
1.75 190100018 670300008
CONTROL FLOW PORT
190100018 EXCESS FLOW
.88 1.69 PORT .265 DIA (2)
670400005 1.69
.38 .88 3.88 .265 DIA (2)
.88
4.81 670400004 PART NUMBER WILL BE
4.81 190100018
670400004 PART NUMBER
STAMPEDWILL BE LOCATION
IN THIS
230005093 STAMPED IN THIS LOCATION
230005093 1.69
240000912 .265 DIA (2)
240000912 .88 2.16
2.16
4.81 670400004 670400006 PART NUMBER WILL BE
671600002
671600002
STAMPED IN THIS LOCATION
VALVES
230005093 670400006
ROTARY SPOOL
240000912
ROTARY SPOOL 2.16
2.88 1.18 671600002
2.88 3.34 670400006
220000762 1.18
220000762 2.31 670801001
.13 3.34 2.31 670801001
240000116
ROTARY SPOOL 5.00
.13 240000116 5.00
240016072 INLET MAIN SPOOL
2.88
240016072 1.18 INLET MAIN SPOOL
3.34 220000762 2.31 670801001
.13 240000116 APPLICATIONS: 5.00
As illustrated in 240016072
the circuit below the RD-100/RD-1900 INLET or returned
MAIN SPOOLto tank. Instead of the control
flow directly
adjustable flow control valves can be used to control the supplying a motor it can be used as a adjustable priority
speed of a hydraulic motor. In this circuit oil from a source is divider and provide adjustable priority flow to a directional
directed into the inlet of the valve. By moving the handle the control valve bank. Also as illustrated the RD-100/RD-1900
flow can be varied from approximately zero when handle is can be used as a restrictive type flow control. In this circuit
vertical to maximum when the handle is horizontal. Oil not the excess flow port is blocked. This would normally be
going to the controlled flow port is bypassed to the excess used with a pressure compensated pump or in a closed
flow port where it can be used to supply another circuit center system.
MOTOR MOTOR
TO TANK OR SECONDARY CIRCUIT
TO TANK OR SECONDARY CIRCUIT
(INLET) (INLET)
CATV 01-04-09-02
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com • PHONE (605) 235-1220 • FAX (605) 235-1082
V55
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (605) 217-6300
PILOT-OPERATED CHECK VALVES
MODEL RD-1400 The PRINCE valve model RD-1400 is a double pilot-operated lock valve.
LOCK VALVE DOUBLE This valve will lock a cylinder in place when a directional control valve is
in the neutral position. In operation oil is directed to one of the valve ports
PILOT-OPERATED and oil can free flow to the corresponding cylinder port. The pressure on
this valve port will shift the pilot spool opening the opposite check valve.
This will allow oil to return through the opposite check valve. This valve has
a hardened steel seat and steel ball and therefore should not be used in
applications requiring absolutely zero leakage. When using a pilot operated
check to lower a heavy load the valve may chatter. An orifice in the line in
some cases may be beneficial.
5.88 CYLINDER
3.50 PORTS
1.75
TO
CYLINDER
3.00
2.00
660214001
VALVE SPECIFICATIONS:
VALVES
MODEL NUMBER PORT SIZE
Capacity: 30 gpm max inlet flow
Pressure: 3000 psi max
RD-1450 1/2 NPTF
Weight: 7 lbs.
RD-1475 3/4 NPTF
Pilot Ratio: 4:1
MODEL RD-1600 The PRINCE valve model RD-1600 is a pilot operated check valve. This valve
PILOT OPERATED blocks oil from flowing from the cylinder port to the valve port until sufficient
CHECK VALVE pressure is applied to the pilot port. Oil can free flow from the valve port to
the cylinder port. The valve has a two stage poppet allowing smooth chatter
free operation.
5.81
240000016 240000018 670300012
PILOT PORT 240019016 240019018
670200004
CYLINDER
PORT
CYLINDER
2.50
1.31
The PRINCE model RD-300 provides the same function as the RD-200 with the added
feature of free reverse checks. This allows the reverse flow of oil from the outlet ports
to the inlet port. The reverse flow is not pressure compensated.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-200 7
MODEL RD-300 Ibs.
PROPORTIONAL DIVIDER
WITH FREE RETURN CHECKS STANDARD MODELS AVAILABLE
DIVIDER INLET FLOW
MODEL NUMBER PORT SIZE
RATIO RANGE
MODEL RD-500P The PRINCE model RD-500P is a pressure compensated proportional flow divider
VALVES
PROPORTIONAL DIVIDER valve with one fixed and one adjustable orifice. This valve provides the same function
WITH ADJUSTABLE ORIFICE as the RD-200 except the divider ratio can be changed in the field.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-500P 7 Ibs.
Pressure: 3000 psi max
STANDARD MODELS AVAILABLE
MODEL NUMBER PORT SIZE INLET FLOW RANGE
RD-537P-8 3/8 NPTF 4-8 GPM
RD-550P-16 1/2 NPTF 8-16 GPM
RD-575P-30 3/4 NPTF 16-30 GPM
The PRINCE valve model RD-1000S is an internally piloted adjustable sequence valve.
MODEL RD-1000S This valve will prevent the flow of oil from going to the sequence port until the pressure
INTERNALLY PILOTED on the inlet port reaches the sequence pressure. The sequence pressure is adjustable
SEQUENCE VALVE WITH within the range given in chart below. A built in check valve allows flow from sequence
EXTERNAL DRAIN port to inlet. To operate properly the drain port must be connected to tank. This
valve is a spool type sequence valve and will provide smooth operation but should not
be used in applications that require low leakage.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: 7 Ibs.
Pressure: 3000 psi max
To complete the model number fill in the blank with the spring letter that corresponds to desired counter
balance pressure range. EXAMPLE: RD-1050SM for 350-1700 psi spring range.
CATV 01-04-09-02
V58 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com • PHONE (605) 235-1220 • FAX (605) 235-1082
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (605) 217-6300
MODEL RD-200, RD-300, RD-300AB, RD-500P,
AND RD-1000S PARTS BREAKDOWN AND DIMENSIONS
RD-200 4.63
3.88 OUTLET
OUTLET
1.75
.88 .38 2.05 P (PSI)
.912
.265 DIA (2) 210
1.00 180 SYMBOL
240000912
-30
150
00
OUT OUT
0/3
120 6
0-1
20
671600002
/30
RD
90 0
-8
20
00
4.13 60 RD
0/3
20
30
RD
0
0 3 6 9 12 15 18 21 24 27 30
IN
FLOW (GPM) RD-200
VALVE BODY
DIVIDER SPOOL INLET
2.31 SEAL KIT NO. 660502001
VALVES
INLET VALVE BODY two outlet reaches 750 PSI. IN
DIVIDER SPOOL RD-300 &
SEAL KIT NO. 660503001 RD-300-AB
RD-500P
SYMBOL
240000912
OUT OUT
671600002
IN
RD-500P
660305001 INLET VALVE BODY
DIVIDER SPOOL SEAL KIT NO. 660505001
ADJUSTMENT SCREW
671800001
220000765
220001302
T
671000011 RD-1000S
VALVE BODY
SPOOL SECONDARY
INLET 660203001
METERING SPRING
SEAL KIT NO. 660510001
CATV 01-04-09-02
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com • PHONE (605) 235-1220 • FAX (605) 235-1082
V59
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (605) 217-6300
CONSTANT VOLUME
PRIORITY DIVIDERS
MODEL RD-400 The PRINCE model RD-400 is a constant volume priority divider. It can
FIXED FLOW PRIORITY be used in applications where two circuits are to be supplied by a single
DIVIDER pump such as power steering systems. In operation the flow of oil supplied
to the inlet is divided into two flows, the priority flow and the excess flow.
The priority flow will remain nearly constant with variations in pressure on
either the priority or excess flow port and will also remain nearly constant
with variations in the inlet flow.
The priority flow GPM is determined by a fixed orifice inside the main
spool. The desired priority GPM must be specified with model number,
see below. The PRINCE model RD-400R provides the same function as
described above with the addition of a built in pressure relief for the priority
port only. This relief is internally adjustable and requires a separate line
to tank. The relief is factory set at 1500 PSI.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-400 7 Ibs.
Pressure: 3000 psi max RD-400-R 7.5 Ibs.
MODEL RD-400 R
FIXED FLOW PRIORITY
DIVIDER WITH PRIORITY
PRESSURE RELIEF STANDARD MODELS AVAILABLE PRIORITY
GPM
PORT SIZE
1.5
VALVE INLET AND PRIORITY 2
MODEL NUMBER EXCESS PORT PORT 3
4
RD-400- ____ RD-400R- _ __ 3/4 NPTF 3/8 NPTF
VALVES
5
RD-405- ____ RD-405R- _ __ 3/4 NPTF 1/2 NPTF 6
RD-412- ____ RD-412R- _ __ #12 SAE #8 SAE 7
RD-450- ____ RD-450R- _ __ 1/2 NPTF 3/8 NPTF 8
RD-455- ____ RD-455R- _ __ 1/2 NPTF 1/2 NPTF 9
RD-477- ____ RD-477R- _ __ 3/4 NPTF 3/4 NPTF 10
12
To complete the model number fill in the blank with the 14
desired priority GPM from the list at right.
EX: RD-400-3 for 3 GPM priority flow; RD-405R-6 for 6 GPM
priority flow.
MODEL RD-500 The PRINCE model RD-500 is an adjustable constant volume priority
ADJUSTABLE FLOW divider. This valve provides the same function as the PRINCE model
PRIORITY DIVIDER RD-400 except the priority flow is adjustable from 2 GPM to 12 GPM.
The priority flow is set using the adjusting screw and is then locked in
place to maintain setting. This allows setting to be fine tuned in the field
to the exact flow needed.
VALVE SPECIFICATIONS
Capacity: 30 gpm max inlet flow
Pressure: 3000 psi max
Weight: 7 Ibs.
CATV 01-04-09-02
V56 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com • PHONE (605) 235-1220 • FAX (605) 235-1082
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (605) 217-6300
MODEL RD-400, RD-400R AND RD-500
PARTS BREAKDOWN AND DIMENSIONS
RD-400 4.63
3.88 EXCESS FLOW
1.75 .38 PRIORITY FLOW
.88 2.05 .91 SYMBOL
.265 DIA (2)
CF EF
1.00
240000912
671600002
4.13
IN RD-400
VALVE BODY
INLET
670300008
SPOOL 2.31
ORIFICE PLUG SEAL KIT NO. 660504001
RD-400R
4.63
3.88
1.75 .38 PRIORITY FLOW EXCESS FLOW SYMBOL
.88 2.05 .91 CF EF
.265 DIA (2)
1.00
240000912
671600002
VALVES
4.13 ADJUSTMENT
SCREW T IN RD-400R
VALVE BODY
3/8 NPTF
INLET
TANK PORT
ALL MODELS 2.31
RD-500 4.63
3.88
1.75 .38 PRIORITY FLOW EXCESS FLOW
.88 2.05 .91 SYMBOL
.265 DIA (2) CF EF
1.00
240000912
671600002
4.13
ADJUSTMENT IN
RD-500
SCREW
VALVE BODY
INLET
2.31
660305001
PLUG
SPOOL SEAL KIT NO. 660505001
670300008