Professional Documents
Culture Documents
CADS Piled Wall Suite
CADS Piled Wall Suite
Analysis
Pile geometry
Soils and ground water initial data (Soils data given for active and passive sides)
Note The automatic generation of soil pressure coefficients has been turned off.
The values displayed in the table above may have been entered manually.
Page No 2
Analysis
Construction sequence
Stage Level or
Ref Stage Type Angle Load Offset Width Length
m/deg. kN(/m) m m m
Code of practice
Code of practice or reference document CIRIA R104 Burland and Potts Temporary Works (Drained)
Application of pressures for stability FOS on available passive
FOS on moments (stability check) 1.50
ULS factor on Tan(Phi) values 1.00
ULS fFactor on drained cohesion values 1.00
ULS factor on undrained cohesion values 1.00
ULS factor on active soil pressures 1.00
ULS factor on passive soil pressures 1.00
ULS factor on active water pressures 1.00
ULS factor on passive water pressures 1.00
ULS factor on loads applied to the soil 1.00
ULS factor on loads applied to the wall 1.00
FOS on embedment (stability check) 1.00
Correction factor on cantilever embedment 1.20
Deflection parameters
Stage ref. 4
Stage type Passive side excavation
0 10 kN/m2
Filled up Soil
100 kN/m
-3.1
Clay
CWR
Breccia bedrock
Page No 5
Analysis
Calc Active Active Active Pas' Pas' Pas' Total Bend. Shear Prop
Level Vert Earth Water Vert Earth Water NettMoment Force Defl't Force FOS
m kN/m2 kN/m2 kN/m2 kN/m2 kN/m2 kN/m2 kN/m2 kNm/m kN/m mm kN/m
-2
-3
-4
-5
-6
-7
-8
-5000 0 5000
Nett Pressures (Shown in thin line) kN/m2
-50 0 50
0
-1
-2
-3
-4
-5
-6
-7
-8
-1000 0 1000
0
Graphical results from analysis of stage ref 4 continued
-1
-2
-3
-4
-5
-6
-7
-8
-5000 0 5000
0
-1
-2
-3
-4
-5
-6
-7
-8