Professional Documents
Culture Documents
Modification Instructions For Integra 250 (500) Powerboard: Subject
Modification Instructions For Integra 250 (500) Powerboard: Subject
2007
Subject
Power boards up to no. 94.0080.04
Modification
See instructions on following pages.
Beginning of modification
Only for service with malfunction of the SE4 capacitors.
M. Hocaoglu
C35
R85
D18
R81
D21
Remove C26, C35, D18, D21, R81, R85. R85 is still used later.
Modified R85 again solder on, push downward through the hole beside it.
Nip off the 2 outer pins of LK60. Assemble the LK60 with isolation
Attach the isolation part as shown in the picture. part on the bottom side by putting
the outer pin in the drilled hole and
middle pin in the other pad of C26.