Professional Documents
Culture Documents
Millenium Ro System Specifications: A Ge Osmonics Portable Reverse Osmosis System
Millenium Ro System Specifications: A Ge Osmonics Portable Reverse Osmosis System
FEATURES:
The Millenium Portable Reverse Osmosis System includes, at a minimum, the following:
• Water quality monitoring:
• Rejection, as percentage of feed water total dissolved solids (TDS)
• Product quality, as mg/liter TDS
• Audible and visual product quality alarm, with mute
• Thin Film (TF) RO membranes
• Product water re-circulation
• Panel mounted pressure gauges
• Stainless Steel (SS) pressure vessels and pump
• Chemically compatible with 1% peracetic acid products
• Inlet water solenoid valve
• Fan cooled
• Pressure switch on inlet water (some models)
• GFI inline with power cord (60Hz only)
• Color coded process connections
• Coated aluminum cabinet
• Component sound insulation
• Electrical tested to satisfy the requirements of the Canadian Standards Association and
Underwriters Laboratory.
SPECIFICATIONS:
OPTIONAL EQUIPMENT:
1. Pre-treatment Cart
The pre-treatment cart holds the Millenium RO unit. Two different types of carts are
available:
The Millenium RO M1 Cart is able to hold the Millenium RO unit and accommodate pre-
filters and up to three pre-treatment tanks.
The Docking Station Cart is uniquely designed to accommodate specific dialysis
equipment, the Millenium RO, pre-filters and up to three pre-treatment tanks.
2. Pre-Treatment
Cartridge type filter housings can be attached to any type pre-treatment cart. Filter
housings can accommodate sediment or carbon filters.
Carbon filter tanks protect the RO membranes from being damaged by chlorine /
chloramines and removes lower molecular weight dissolved organics from RO feed
water. These are available in semi-automatic control valve and exchange head styles.
Water softener tanks remove calcium, magnesium and other scale producing
contaminants from the feed water. Their removal prevents the buildup of scale on the
membrane surface. The control valve is normally governed by a semi-automatic time
clock.
pH of Supply Water
Operating 5.5 10.5
Operating w/ Chloramines1 5.5 8.5
Cleaning 2.0 11.0
40179
Initial product flow rate based upon membrane manufacturer’s specifications of pretreated feed
water, 200psi applied pressure, 77°F (25°C) incoming water temperature, 1000 ppm NaCl, 10%
recovery and a 1psi product pressure. Membrane flux may vary ± 10%.
OS1228070
Initial product flow rate based upon membrane manufacturer’s specifications of pretreated feed
water, 225 psi applied pressure, 77°F (25°C) incoming water temperature, 2000 mg/l NaCl, 15%
recovery (after 24 hours). Membrane flux may vary ± 15%.
Please Note: Water production decreases approximately 1.5% per 1°F (3% per 1°C) incoming
water temperature drop.
Product Flow
Operating pressure: 190 PSI @ 25°C (77°F)
Product pressure: 1 PSI
1
Operating W/ Chloramines present and pH above 9.0 additional pretreatment is required.
2
It is important to run water at the design flow rate when testing water pressure rather than reading static
pressure.
Doc No. 1236662a Page 5 of 7 11-Aug-03
nd
GE Osmonics - 7848 S. 202 Street Kent, Washington 98032 (253) 395-2200 or (800) 633-3080
GE Osmonics - Millenium - RO System Specifications
ELECTRICAL REQUIREMENTS
HP 1/3
Voltage 115 / 230
Hertz 60 / 50
Phase 1
Amps 8/5
DESIGN PARAMETERS
M-500 M-750
Product Flow Rate GPM/LPM .34 / 1.31 .52 / 1.97
Initial Pump Pressure 190 PSI 190 PSI
Design Temperature 25°C 25°C
GENERAL SPECIFICATIONS
Process Connections
Feed Water Female garden hose thread (FGHT)
Product Male garden hose thread (MGHT)
Waste Flexible Hose
Disinfect/cleaning Quick disconnect
PUMP SYSTEM
Quantity 1
Material of Construction 316 SS
Flow Capacity 100 GPH
Discharge Pressure 200 PSI
Process Connections 3/8 FNPT
Motor Style ODP
Motor Horsepower 1/3
Motor Revolutions 1725 / 1425
Motor Voltage 115 / 230
Phase Single
Hertz 60 / 50
Membrane Elements
M-500 M-750
Quantity 2 2
Design Type Spiral wound Spiral wound
Material of Construction Thin film Thin film
Element Rejection ≥ 95% ≥ 95%
Element Productivity 500 GPD 750 GPD
Pressure Vessel
Quantity 2
Material of Construction 304 SS
Element Capacity 1
Element length 21”
Diameter (Inner) 2.45”
Length 22 1/2”
QUALITY MONITORING
Percent Rejection
Quantity 1
Range 70-99.9%
Display LED
Conductivity (TDS)
Quantity 1
Range (mg/l) 0.1-99.9
Display Digital
Dimensions
Horizontal Height 8”
Width 25 1/2”
Depth 15”