Professional Documents
Culture Documents
ENGG 325 - Electric Circuits and Systems Midterm Examination
ENGG 325 - Electric Circuits and Systems Midterm Examination
Instructions:
• The maximum number of marks is 50, as indicated; please attempt all questions. The
midterm examination counts 25% toward the final grade.
• Please answer questions in the spaces provided; if space is insufficient, please use
the back of the pages.
• Please show your work; where appropriate, marks will be awarded for proper and
well-reasoned explanations.
ENGG 325 Midterm Examination (Fall 2007) 2
Name: , ID:
5ix
v1 v2
+
_
ix 15Ω 2A 3A
v3 25Ω v4 50Ω v5
+ _ +
10V _ 40V + 60V _
v6
Fig. Q1. Find all node voltages, then power in dependent and 10V sources.
48V
v1 10Ω v2 v3 3Ω v4
+
_
2A 6Ω 1A 2Ω 7A
Fig. Q2. Find all of the mesh currents, then node voltages.
(a) Suppose that the voltage vab for the circuit shown has been accurately measured
and found to be vab = 20V . Determine the Thévenin equivalent circuit at the
terminals a and b for this circuit. [10 marks.]
(b) Predict vab if a resistor Rab is now placed across terminals a and b, where:
i. Rab = 2.25Ω;
ii. Rab = 7.85Ω;
iii. Rab = 47Ω. [1 mark each.]
50Ω
+
15V _ 30Ω
ix
a
5Ω 20Ω +
+ vab
10 i x 40V _ 10Ω
_
Fig. Q3. Determine the Thévenin equivalent circuit; find vab for three cases.
4. Consider the circuit given in Fig. Q4, which is exactly the same circuit as in Fig. Q2.
Determine vx using the principle of superposition.
48V
10Ω 3Ω
+
_
+
2A 6Ω 1A 2Ω vx 7A