Professional Documents
Culture Documents
Blasthole Drills: D45KS and D50KS
Blasthole Drills: D45KS and D50KS
Blasthole Drills: D45KS and D50KS
blasthole drills
Sandvik is a high-technology engineering group with
world-leading positions in selected areas – tools for metal
working, advanced materials technology, and mining and
construction. We are represented in 130 countries.
SANDVIK is a registered trademark owned by Sandvik Companies in Sweden and other countries. © 2009 Sandvik
D45KS/D50KS Brochure
These drills have solid engine and compressor options that provide the
right combination for any drilling condition. The engine and compres-
sor range allows for optimized hole flushing and the most power for
PRODUCTIVE OPERATOR’S ENVIRONMENT down-the-hole (DTH) drilling. Operating at lower speeds and load EFFICIENT HYDRAULICS
Excellent visibility of the drilling operation
factors assures longevity. Additional factors like load sensing and fan
Closed loop system for rotation, feed, track and fan circuits
speed controls add performance.
Higher productivity with quicker holespotting − Lowers operating costs
− Fast set-up for drilling The effective handling of drill pipe − Reduces power consumption
Comfortable environment with shock mounted cab means shorter cycle times and
Large 511 L (135 gal) pressurized hydraulic oil reservoir
more holes drilled.
Roller sunshades to reduce glare − Reduces the number of oil cycles
Thermal insulation and noise reduction to 81,8 dBA − Lowers oil temperatures
Drill controls arranged logically on the console − Extends service intervals
− Ease of operation
3 µm (3 micron) filtration
− Intuitive fast learning − Insures cleaner system
Air conditioning/heating/pressurizing unit for
Even the best systems fail from time to time.
− Extends component life
operator comfort with less fatigue − Lowers maintenance costs
Operators need open, well designed work deck
FOPS approved in compliance with mining safety requirements area. These drills offer the quick access that
Extended cab provides ample work space for a trainer keeps you up and running.
Holding wrench and optional hydraulic auto tong wrench − Faster servicing Sandvik reserves the right to amend these specifications without A Mast up (height) 11,4 m 46' 5 1/2" 16 m 52' 7 1/2"
and pipe thread greaser − Greater availability of the drills notice. Shipping dimensions vary with option selected. B Bullshaft to drill table 9,9 m 32' 6 1/2" 12,3 m 40' 2"
− Help to break loose tight pipe joints
Central greasing station options, manual or electric, C Track to track inside measurement 2,2 m 7' 2"
Hydraulic loader swing and indexing: available for lubricating D Outside deck to centerline drill table 2,6 m 8' 6"
− Simplicity of very few moving parts in the loader − Reduce wear at main pivot points
E Track to track outside measurement 3,7 m 12' 1"
− Higher productivity − Increase serviceability
− Lower maintenance and drill pipe cost F Outside deck to opposite track (outside) 4,4 m 14' 6 1/2"
− Add to the availability of the drills
Ease of service is a priority with Sandvik equipment G Overall machine width (operating) 4,9 m 16' 4"
H Height ground to top work deck (mast down) 5,9 m 19' 5 5/8"
I Ground level to top of drill table (mast down) 4,8 m 15' 10"
J Ground level to top of air unit on cab 3,78 m 12' 4 5/8"
K Ground level to jack pad (jack retracted rear) 0,47 m 1' 6 1/2"
L Centerline of jack to idler sprocket (rear) 1,1 m 3' 7 1/4"
D45KS popular options Benefits D50KS popular options Benefits M Centerline of idler to drive sprocket (front) 3,6 m 11' 9 1/2"
N Centerline of rear jack to centerline front jack 6,9 m 22' 8"
Compressor options 28,3 m³/min Compressors available up to Capability of operating at
Increased productivity O Ground level to jack pad (jack retracted front) 0,62 m 2' 1/2"
(1000 SCFM) @ 24,1 Bar (350 psi), 34,7 m³/min (1323 SCFM) @ 6,9 Bar high elevation
with 6” hammer P Centerline idler to centerline axle 0,68 m 2' 2 7/8"
32,8 m³/min (1160 SCFM) @ 24,1 Bar (100 psi), Cat or Cummins Improved cleaning of large holes
Improved hole cleaning
(350 psi) A Q Drill length (mast up) 10,3 m 33' 11 1/4"
Multiple dry dust collection and Advanced chip removal and R Drill length to timing chain adjuster (mast down) 13,8 m 45' 5" 15,7 m 51' 4 3/4"
Multiple dry dust collection and Advanced chip removal and dust water injection systems dust suppression S Drill length overall (mast down) 14,1 m 46' 4 7/8" 15,9 m 52' 4 7/8"
water injection systems suppression Meets or exceeds regulatory
Meets or exceeds regulatory B T Ground level to deck frame (height) 1,37 m 4' 5"
standards
standards U Ground level to top (head air piping) (mast down) 4,23 m 13' 10 3/4"
Various rotary head speed/torque Capability to fine tune drilling in vari- 4,61 m 15' 1 5/8"
V Ground level to top safety hoop (mast down)
Extended mast Increased first pass capacity to combinations ous ground conditions
11m (36')
Various rotary head speed/torque Capability to fine tune drilling in vari- Central lubrication and fluid systems Speed of servicing
combinations ous ground conditions Cleaner operation
H
Cold and arctic weather equipment Enables operation in extreme envi- Drill monitoring system For preventative maintenance I V
ronments in operations
J U
Extended cab and connecting walkway Improved service access, comfort and Extended cab and connecting walkway Improved training, comfort
efficiency and efficiency T
D K L M
C N O
F E P
G Q
R
S