Professional Documents
Culture Documents
Aula 3
Aula 3
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/3/0
no ip address
clock rate 2000000
shutdown
!
interface Serial0/3/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
ip flow-export version 9
!
!
!
!
!
!
!
line con 0
password cisco
!
line aux 0
!
line vty 0 4
password cisco
login
!
!
!
end
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#banner m
r1#banner m
r1#banner motd
^
% Invalid input detected at '^' marker.
r1#banner ?
% Unrecognized command
r1#?
Exec commands:
<1-99> Session number to resume
auto Exec level Automation
clear Reset functions
clock Manage the system clock
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
erase Erase a filesystem
exit Exit from the EXEC
logout Exit from the EXEC
mkdir Create new directory
more Display the contents of a file
no Disable debugging informations
ping Send echo messages
reload Halt and perform a cold restart
resume Resume an active network connection
rmdir Remove existing directory
send Send a message to other tty lines
setup Run the SETUP command facility
show Show running system information
ssh Open a secure shell client connection
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
vlan Configure VLAN parameters
write Write running configuration to memory, network, or terminal
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#
r1#config
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#banner m
r1(config)#banner motd
% Incomplete command.
r1(config)#banner motd texto de text
r1(config)#end
r1#
%SYS-5-CONFIG_I: Configured from console by console
r1#exit
r1>en
Password:
Password:
r1#
r1#copy run
% Incomplete command.
r1#copy run
r1#copy running-config star
Destination filename [startup-config]? c:
%Error copying nvram:c: (Invalid argument)
r1#reload
System configuration has been modified. Save? [yes/no]:y
Building configuration...
[OK]
Proceed with reload? [confirm]
System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB
CISCO2901/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC disabled
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
ex
r1>