This document summarizes an example of an oil well that is being pumped at a constant bottomhole pressure of 600 psig. The well produces from an reservoir with unknown drive mechanisms and an initial gas-oil ratio of 480 scf/bbl that remains constant. Reservoir parameters like porosity, saturation, and fluid properties are provided to allow analysis of whether the well exhibits boundary dominated flow and if Fetkovich typecurves or specialized/numerical modeling approaches could help analyze production.
Original Description:
guia numero 6 para la manipulacion del software RTA
This document summarizes an example of an oil well that is being pumped at a constant bottomhole pressure of 600 psig. The well produces from an reservoir with unknown drive mechanisms and an initial gas-oil ratio of 480 scf/bbl that remains constant. Reservoir parameters like porosity, saturation, and fluid properties are provided to allow analysis of whether the well exhibits boundary dominated flow and if Fetkovich typecurves or specialized/numerical modeling approaches could help analyze production.
This document summarizes an example of an oil well that is being pumped at a constant bottomhole pressure of 600 psig. The well produces from an reservoir with unknown drive mechanisms and an initial gas-oil ratio of 480 scf/bbl that remains constant. Reservoir parameters like porosity, saturation, and fluid properties are provided to allow analysis of whether the well exhibits boundary dominated flow and if Fetkovich typecurves or specialized/numerical modeling approaches could help analyze production.
- Initial solution GOR = 480 scf/bbl; remains relatively constant - Reservoir drive mechanism unknown - Workover performed in late July, 2002 to clean out well
Reservoir / Wellbore Parameters:
Pi = 5,300 psia (bottomhole)
T = 200 deg F h = 20 ft porosity = 20 % Sg = 0% Sw = 20 % G = 0.65 CO2, H2S, N2 = 0
Oil Gravity = 40 API
Initial Solution GOR = 483 scf/bbl Producing GOR = 483 scf/bbl
Questions:
- Does the well exhibit boundary dominated flow?
- Is this a good application for Fetkovich typecurves? - How can you apply Specialized analysis to this example? - Does using Numerical Modeling help you further with your analysis?