Professional Documents
Culture Documents
Methodology: For Two Way Reinforcements of The Footing
Methodology: For Two Way Reinforcements of The Footing
We first bend the bars which are made of expired welding rods. There are six
reinforcement bars that goes both ways having a total of twelve reinforcing bars.
Then we started tying them together, starting from the sides and using it
as a guide in tying the rest using a very thin GI wire.
For the vertical reinforcements of the column:
We measure and marked the GI wire to where it should be bent and cut.
We then cut and bent the GI wires to make the lateral reinforcements of the
column.
Finally we can tie the
lateral reinforcements to
the vertical
reinforcements of the
column.
Final look of the two-way reinforcements of the footing which are uniformly
spaced together with the temporary supports.