Professional Documents
Culture Documents
Global Standardized Symbols PDF
Global Standardized Symbols PDF
5M-1982 ISO
Projection method third angle third angle third angle first angle
Default relationship between size & form size controls form (Rule #1) size controls form (Rule #1) size controls form (Rule #1) form is independent of size
Controlling coplanarity of multiple Use profile of a surface, Use profile of a surface, Use profile of a surface, Use flatness, indicate number of
surfaces indicate number of surfaces. indicate number of surfaces. indicate number of surfaces. surfaces, write CZ (Common
Zone) in tolerance frame.
Box w/ GD&T control symbols & tolerance feature control frame feature control frame feature control frame tolerance frame
Form: Straightness
Form: Cylindricity
Orientation: Parallelism or
Orientation: Angularity
Orientation: Perpendicularity or
FOS only; composite vs. FOS only; composite vs. FOS only. Must indicate MMC, May be applied to a FOS or a
single segment well-defined. single segment well-defined. LMC, or RFS on tolerance & surface. No distinction between
Location: Position RFS is the default tolerance RFS is the default tolerance FOS datum. No distinction composite vs. two single-
condition and RMB is the and FOS datum condition. between composite vs. two segment.
default FOS datum condition. single-segment.
Median points are coplanar to Median points are coplanar to Symmetry symbol not defined “Extracted median surface” is
Location: Symmetry datum plane (coplanarity plus datum plane (coplanarity plus or used. Symmetry controlled coplanar to datum plane.
volume/mass balance). volume/mass balance). using position RFS.
Median points are coaxial to Median points are coaxial to “Axes of all cross-sectional “Extracted median line” is
Location: Concentricity datum axis (coaxiality plus datum axis (coaxiality plus elements” are coaxial to coaxial to datum axis.
volume/mass balance). volume/mass balance). datum axis.
© 2012 Stolter, LLC and Geometric Learning Systems. ! Information believed to be accurate: no warrantee, express or implied.! ! ! ! ! www.gd-t.com
Topic ASME Y14.5-2009 ASME Y14.5M-1994 ANSI Y14.5M-1982 ISO
Envelope: Related vs. Unrelated Clear distinction made. No distinction made. No distinction made. No distinction made.
default condition; no symbol required for position RFS; default condition for all controls,
Regardless of feature size (RFS) default condition; no symbol
( OK for position, legacy) default condition w/other cntrls no symbol
FOS datums referenced RMB FOS datum ref’d RFS default; required for position RFS;
Regardless of material boundary (RMB) none (default)
by default; no symbol ( OK w/position, legacy) default condition w/other cntrls
or shown with phantom Shown with phantom lines on Shown with phantom lines on UZ (Unequal Zone)
Unequally disposed profile
lines on drawing. drawing. drawing.
none (use 0 and open none (use 0 and open none (use 0 and open
Reciprocity
size tolerance) size tolerance) size tolerance)
Countersink none
Depth none
© 2012 Stolter, LLC and Geometric Learning Systems. ! Information believed to be accurate: no warrantee, express or implied.! ! ! ! ! www.gd-t.com