Professional Documents
Culture Documents
Leitor Oxigenio Dissolvido Exa Do402g
Leitor Oxigenio Dissolvido Exa Do402g
Features
• Versatile sensor inputs
• On-line sensor checking monitors integrity of mem-
brane
• RS485 communications interface
• Event logbook in software
• Four fully configurable SPDT contact outputs
• Two fully configurable mA outputs DO30G Galvanic Dissolved Oxygen Sensor
• Built-in PI controller
• Easy to use EXA control panel
14
The user-interface is simplified to a basic set of 6 keys
accessible through the flexible window cover. It uses a
simple step by step, question and answer style to com- 12
municate with the operator by giving messages on the
second line of the display and indicating which keys are
to be pressed in the display. 10
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
3
Cables and terminals MAINTENANCE
The glands will form a tight seal on cables of outside HOLD TEMP.MAN. F AIL
MODE
WASH/S3
ENT
FAIL/S4
SERVICE
YOKOGAWA MARKINGS
WITHIN
ENCLOSURE SERVICE
D E F
*
A B C
POWER CABLE SENSOR CABLE (S) ANALOG OUTPUTS
for DO70G or CABLE
COMMUNICATION
INPUT CONTACT *1 Fig.4. Three level operation
D E F
CONTACT (S3, S4/FAIL) CONTACT (S1, S2) POWER CABLE MAINTENANCE level
OUTPUT CABLE (S) OUTPUT CABLE (S) Use : Normal operation and checking
How : Simple operation by dialog through the
Fig.2. Glands to be used for cabling closed front cover
Example : Calibration
COMMISSIONING level
Use : For normal commissioning
How : Removal of the front cover reveals the
access key and second menu
Example : Output range setting
SERVICE level
Use : Only for specialized functions
How : Through special service code entries
Example : Selecting salinity compensation
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
4
B. Input ranges NOTE:
- Dissolved Oxygen: 0- 50 mg/l (ppm) F
or S4 (FAIL) LED lights when
- Temperature : 0- 50 ºC (32- 122 ºF) power is removed (Fail safe).
C. Span C
ontact outputs configurable for
- DO concentration: minimum: 1 mg/l (ppm) hysteresis and delay time.
maximum: 50 mg/l (ppm) - Switch capacity
- % saturation : minimum: 10 % : Maximum values 100 VA,
maximum: 300 % 250 VAC, 5 Amps.
- Temperature : minimum: 25 ºC (77 ºF) Maximum values 50 Watts, 250
maximum: 50 ºC (122 ºF) VDC, 5 Amps.
- Status :H igh/low process alarms, selected
D. Transmission signals from conductivity, resistivity and
: Two isolated outputs of temperature.
0/4-20 mA DC with common nega- Contact output is also available to
tive. signal “Hold active”
Maximum load 600 Ω. - Control function: On / Off
Auxiliary output can be chosen from PI pulsed : Proportional duty cycle control with
temperature, DO, PI control, table, integral term.
burn up (22 mA) or burn down PI frequency : Proportional frequency control with
(0 or 3.5 mA) to signal failure. integral term. In addition wash clean
E. Temperature compensation ing control signal on S3, and FAIL
:0 -50 ºC alarm for system and diagnostic er-
Sensor types: Pt100, Pt1000, rors on S4.
PB36 ,22k NTC K. Contact input
Automatic or Manual temperature When DO70G is connected, contact input cannot be used.
compensation. Voltage-free contact (do not apply voltage)
F. Calibration : Semi-automatic calibration with Wash start or input remote range change (either choice)
automatic compensation for influ- On resistance: 10Ω or less
ence of barometric pressure and Off resistance: 100kΩ or more
altitude on partial pressure of Oxy- On time: 0.5 sec. or more
gen in air (or solubility of Oxygen Note: At the circumstance influenced from noise (e.g.
in water). Automatic compensation long transmission of contact input), insertion of a
for influence of salinity of water relay near DO402G is recommended for insulat-
on solubility of Oxygen in water is ing.
programmable. L. Power supply:
The correction for pressure, salin- Voltage ratius (Applicable range):
ity and temperature meets ISO 100 V (85 to 115 V) AC
5814 115 V ( 97.8 to 132.2 V) AC
Possible calibration routines are: 230 V (195.5 to 264.5 V) AC
-S lope (span) calibration in ambient Supply frequency rating (Applicable range):
air. The calibration table is based 5
0 / 60 Hz (± 5%)
on 70% rH and is determined Power consumption: 10 VA maximum for steady
empirically. operation
-S lope (span) calibration in water, M. Safety and EMC conforming standards
saturated with air: according Safety: conforms to EN 61010-1
ISO 5814 EN 61010-2-030
- Zero calibration (normally inactive) CAN/CSA No.61010-1
G. Serial communication UL Std. No. 61010-1
: Bi-directional
according to the CSA C22.2 No. 94.2
EIA-485 standard using HART®- UL 50E
protocol and PC402 software.. EMC: conforms to EN 61326-1 Class A,Table 2
(For use in industrial locations) (Note 1)
H. Logbook : Software record of important
EN 61326-2-3
events and diagnostic data.
EN 61000-3-2 Class A
Available through RS485, with key
EN 61000-3-3, AS/NZS CISPR 11
diagnostic information available in
EMC Regulatory Arrangement in Australia
the display.
and New Zealand (RCM)
I. Display : Custom liquid crystal display, with EN 55011 Class A, Group 1
a main display of 3 1/2 digits 12.5 Korea Electromagnetic Conformity Stand-
mm high. Message display of 6 ard Class A 한국 전자파적합성 기준
alphanumeric characters, 7 mm high.
J. Contact outputs Category based on IEC 61010: II (Note 2)
- General : Four (4) SPDT relay contacts with Pollution degree based on IEC 61010: 2 (Note 2)
LED indicators. For S1, S2, and S3, Installation altitude: 2000 m or less
the LED is on when relay is pow- Note 1: This instrument is a Class A product, and it is
ered. designed for use in the industrial environment.
Please use this instrument in the industrial envi
ronment only.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 22, 2015-01
5
Note 2: Installation category, called over-voltage J. Automatic safeguard : R eturn to measuring mode
category, specifies impulse withstand voltage. when no keystroke is made
Category II is for electrical equipment. for 10 min.
Pollution degree indicates the degree of
existence of solid, liquid, gas or other inclusions K. Power interruption: Less than 50 milliseconds no effect.
which may reduce dielectric strength. Degree 2
is the normal indoor environment. L. Operation protection: 3
-digits programmable
password.
Operating Specifications
M. Connection cable: When use DO30G, the dis-
A. Performance : DO (at t process = 25 °C) tance between sensor and the
- Linearity :± 0.03 mg/l or ± 0.5%FS, whichever transmitter will be maximum
is greater 50m if WTB10 terminal box is
- Repeatability : ±
0.03 mg/l or ± 0.5%FS, whichever connected.
is greater (DO70G cannot connect to
- Accuracy :± 0.05 mg/l or ± 0.5%FS, whichever WTB10. The distance between
is greater DO70G and the transmitter is
always maximum 10m.)
B. Performance : Temperature (Pt1000, 22k NTC,
PB36) Model and suffix codes
- Linearity : ± 0.3 ºC
- Repeatability : ± 0.1 ºC [Style: S3]
- Accuracy : ± 0.3 ºC
Suffix Option
Performance : Temperature (Pt100) Model Description
code code
- Linearity : ± 0.4 ºC
DO402G ---------------- ---------- Dissolved Oxygen Con-
- Repeatability : ± 0.1 ºC verter
- Accuracy : ± 0.4 ºC
Type -1 ---------- General
Note on performance specifications: Power Supply -1 ---------- 115V +/-15% AC, 50/60 Hz (*2)
The specifications are expressed Voltage -2 ---------- 230V +/-15% AC, 50/60 Hz
with simulated inputs, because the -5 ---------- 100V +/-15% AC, 50/60 Hz
DO402G can be used with many Language -E ---------- English
different sensors with their unique -J ---------- Japanese
characteristics.
The following tolerance is added to Options
Mounting Bracket /U Pipe, wall mounting
above performance. bracket (Stainless steel)
mA output tolerance : ± 0.02 mA of /PM Panel mounting bracket
"0/4 - 20 mA" (Stainless steel)
Digital display tolerance : +1 digit Hood /H3 Hood for sun protection
C. Response time (Carbon steel)
0- 90% : 10 s /H4 Hood for sun protection
(Stainless steel)
D. Ambient operating temperature Tag Plate /SCT Stainless steel tag plate
:-10 to + 55 °C (14 to 131 ºF) Conduit Adapter /AFTG G 1/2
/ANSI 1/2 NPT
Coating /X1 Epoxy baked finish (*1)
E. Storage temperature
: -30 to +70ºC (-22 to 158 ºF) *1: The housing is coated with epoxy resin.
*2: When CSA safe standard conformity product
is needed, select 115V “-1” of Power Supply
F. Humidity : 10 to 90% RH non-condensing
Voltage.
G. Housing
- Case :C ast aluminum with chemically
resistant coating
- Cover : Flexible polycarbonate window
- Case color : Off-white (Munsell 2.5Y8.4/1.2)
- Cover color : Moss green (Munsell 06GY3.1/2.0)
- Cable entry : Via six PG13.5 nylon glands
- Cable terminals : For up to 2.5 mm2 finished wires
- Protection :W eather resistant to IP65, NEMA
4X, CSA Type 3S
- Mounting :P ipe wall or panel, using optional
bracket.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Oct. 27, 2015-02
6
Control and Alarm Functions Fault alarm :C
ontact S4 by default set to
function as an alarm, indicating
Control output (mA) that the EXA has found a fault
: Pl control on the 2nd mA output. in the measuring loop. If the self
The 2nd mA output can be con- diagnostics of the EXA indicate a
figured to give a P/I (proportional fault or error, the FAIL contact will
and integral) control output. The be switched. In most cases this will
setpoint, proportional band and be caused by a malfunction of the
integral time are each fully pro- measuring loop. The FAIL contact
grammable. is also closed when the power is
- Adjustable parameters removed.
:S etpoint, proportional range and The “FAIL” contact may also be
integral time. configured as a fourth process
alarm.
% duty cycle control
Process alarm : T he contact will be switched when 100 toff > 0.1 sec
the process value reaches a limit.
This can either be a high or low
limit. Duty cycle
- Adjustable parameters
: Setpoint for the process value
Hysteresis of the switching action 50% 50%
Delay time of the relay (0 to 200 s) 50
ton toff
Duty cycle
PI duty cycle control (Fig. 5)
: The contact is used to control the ton > 0.1 sec
time a solenoid valve is opened.
The proportional control is achieved 0 Duty cycle
by opening and closing the sole- Proportional DO
noid valve and varying the ratio of Setpoint Range % of output range Time
on and off time (on, off).
- Adjustable parameters Fig. 5. Duty cycle control
:S etpoint, proportional range and in-
tegral time. Total period of the pulse % controller output 0.3 s
period (5 to 100 s) 100
PI pulse frequency control (Fig. 6)
Maximum pulse frequency
: The contact is used to control a
pulse-driven pump. 0.3 s
The frequency of pulses regulates
the pump speed.
- Adjustable parameters 50
50% pulse frequency
: Setpoint, proportional range & inte-
gral time. Maximum pulse frequency
(50 to 120/min.)
Wash Recovery
tw tr
Interval Time
Time
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
7
External Dimensions
DO Converter DO402G
Unit: mm (inch)
Hood (optional)
Option code : /H□
Four M6 screws, 8 (0.31) deep
184 220
(7.24) (8.66) 80
(3.15)
72
(2.83)
144 20 (0.79)
(5.67) 80
(3.15)
144 23 112
(5.67) (0.91) (4.41) Adaptor for conduit work
(option code : /AFTG, /ANSI)
Approx. 55 (2.17)
A B C A : Power supply for DO70G, or
contact input separately.
36 (1.42) B : Sensor cable Adaptor 49
C : Output signal (1.93)
D : Contact output (S3 and S4)
D E F 38 (1.50) E : Contact output (S1 and S2)
F : Power supply
36 36
(1.42) (1.42) G 1/2 female ( / AFTG)
Ground terminal 1/2 NPT female ( / ANSI) Weight: Approx. 2 kg
(M4 screw *) *: Tightening torque: 1.2 N·m.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
8
Pipe/Wall Mounting Brackets (Option Code: /U) Weight: approximately 0.7 kg
Example of bracket used for pipe mounting
Unit: mm (inch)
188
(7.40) M6, 4 screws *
174
(6.85)
200
(7.87)
50
(1.97)
224
(8.82) 200
(7.87)
35 (1.38)
15 (0.59)
70 (2.76)
*: Tightening torque: 2 N·m. 10mm dia., 3 holes 100 (3.94) F14-1.ai
(0.39)
Example of bracket used for panel mounting (Option Code: /PM) Weight: approximately 0.4 kg
23 (0.91) M6, 4 screws *
12 max.(panel thickness)
(0.47) Panel cutout dimensions
M5, 2 screws
137 +20
178 (5.43)
(7.01) *: Tightening torque: 2 N·m. F14-2.ai
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
9
System Configuration
SENSOR POWER
S1
CONTACT
OUTPUT
0/4-20mA S2
OUTPUT
SIGNALS
0/4-20mA
S3/WASH
CONTACT
OUTPUT
S4/FAIL
RS485
CONTACT
INPUT
Contact Digital
Input Sensor Inputs mA Outputs Communications
21 22 14 13 17 11 12 18 16 15 63 66 65 62 61 95 94 93 92 91
SCREEN Liquid mA2 mA1 TL TL
Shield earth SCREEN SCREEN
23 Temp 99
SCREEN 2
71 72 73 51 52 53 41 42 43 31 32 33 3 2 1
G N L
250VAC 250VDC FUSE
5A 5A
100VA 50W
100 VAC 200 mA
115 VAC 200 mA
S4 S3 S2 S1
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00
10
Inquiry Specifications Sheet for Dissolved Oxygen Analyzer
Make inquiries by placing checkmarks () in the pertinent boxes and filling in the blanks.
1. General information
Name of your company:
Name of inquirer: Dept. or sect.: (telephone: )
Name of plant:
Measuring point:
Purpose of use: Indication Record Alarm Control
Power supply: V AC
2. Measuring conditions
(1) Liquid temperature: to , normal [˚C]
(2) Liquid pressure: to , normal [kPa]
(3) Flow rate to , normal [m/s]
(4) Name of liquid:
(5) Composition of liquid:
(6) Other remarks:
3. Installation environment
(1) Ambient temperature:
(2) Location: Outdoors Indoors
(3) Other remarks:
4. Specification requirements
(1) Measuring range: 0 to 50 mg/l,
(2) Output signal: 4-20 mA DC, 0-20 mA DC
(3) System component selection : Sensor Converter Power supply unit for DO70G Terminal box
Holder Cleaning system Parts set for maintenance Calibration set
(4) Length of sensor cable : 3 m 5 m 10 m 15 m 20 m
(5) Type of holder : Guide pipe Submersion Floating ball Suspension
(6) Cleaning method : No cleaning With jet cleaning
(7) Other remarks:
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation GS 12J05D02-00E 7th Edition Jul. 21, 2015-00