Professional Documents
Culture Documents
General Parts Manual - MEGA
General Parts Manual - MEGA
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 1
Alphabetical Index
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 6
Back to ALPHA INDEX
Clamp, Hose 4”
1 3 6 BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 000210 GEAR ASSEMBLY, HORIZONTAL
2 1 000211 MOTOR MOUNT
3 1 000212 MOUNT, CYLINDER
4 1 033282 GUARD, REAR
5 1 300084 MONITOR
TOP VIEW 6 1 300096 CYLINDERS, HYDRAULIC
7 1 300097 MOTOR
5 8 2 350059 SCREW, CAP
9 2 350014 WASHER
10 2 350023 NUT
11 3 300100 SCREW, SET
12 2 350231 SCREW, CAP
13 2 350005 WASHER
14 2 350027 NUT
15 1 350044 NUT
16 1 300098 CLEVIS
17 1 300099 PIN
18 4 354124 SCREW, FLAT HEAD MACHINE
19 4 350025 NUT
20 1 300102 SPROCKET
21 1 300103 CHAIN
6 22 2 000216 BLOCK
SIDE VIEW
15
5
16 17
11
18 19 4
1
20
22
21
12 13 14
2 8 9 10
Part Number: 000213
7
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 10
Back to ALPHA INDEX
page 1 of 2
Location: Cab of tractor.
Use: Control of remote monitor.
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 000213 REMOTE MONITOR ASSEMBLY
2 2 300073 VALVE, DIRECTIONAL
3 1 300074 MANIFOLD
4 1 300076 VALVE, FLOW CONTROL
5 1 352875 REDUCER, AERO-2081-12-8S
6 4 352303 REDUCER, AERO-2021-6-4S
7 1 026691 MONITOR CONTROL BOX ELECT. ASS'Y.
8 1 300083 INLINE FUSE (20 AMP.)
9 3 350863 P LUG, 1/2
10 4 352436 90˚ ELBOW, AERO-2024-4-4S
11 2 352305 ADAPTER, 6-6S AERO-2021-8-8S
12 2 352310 ADAPTER, 8-8S AERO-2021-8-8S
13 2 352871 REDUCER, AERO-2081-8-4S
14 2 352469 NIPPLE, AERO-2083-6-6S
15 1 352872 REDUCER, AERO-2081-8-6S
16 1 352472 NIPPLE, AERO-2081-8-8S
17 1 352848 90˚ ELBOW, AERO-2087-8-8S
18 1 352874 REDUCER, AERO-2081-12-6S
19 2 352881 REDUCER, AERO-2081-24-12S
20 1 352846 90˚ ELBOW, AERO-2087-6-6S
21 2 301096 SCREW, SET 1/8
22 8 354476 STR. JIC 1/4
23 2 354472 HOSE, HYD. 1/4 x 3'-10"
24 2 354472 HOSE, HYD. 1/4 x 5'-10"
30" 300488 WIRE, 14 GA. 6 COND.
10' 300484 WIRE, 14 GA. 2 COND.
NOTES:
1. IF THIS ASS’Y IS SOLD AS PARTS ORDER,
INCLUDE (2) 352862 TEE 1 1/2 x 1 1/2.
2. SEE FINAL TANK JOB FOR HOSES.
Part Number: 000214
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 12
Back to ALPHA INDEX
Mount, Foot
Location: Scraper Tanker - Mounted on pump station at rear of tank between rear frame assembly.
Truck - Mounted on pump station at rear of tank.
Use: Holds hydraulic motor in place.
FITTING SIZE (1) FITTING SIZE (2) FITTING SIZE (3) FITTING SIZE (4)
Location: Oil Cooling Manifold
2.00 Dia. Thru 0.56 Dia. Thru (4x) 0.422 X 1" DEEP (4x) 1.50 Dia.
1 2
Location: Gooseneck
Use: Transfer oil to steering cylinder PART NO. DESCRIPTION
012326 TUBE 1" STEERING UPPER
022327 TUBE 1" STEERING UPPER
012328 TUBE 1" STEERING ON
012329 TUBE 1" STEERING LOWER
Manifold, Lube
Location: Varies
Use: Multi-grease port
FITTING SIZE (1) FITTING SIZE (2)
1/8 - 27 DIA. N.P.T. 7/8" DIA.
1
1
1
1
1
Step, Cable
page 1 of 2
page 2 of 2
1” Hose Assembly
ITEM QTY. PART NO. DESCRIPTION
1 1 352476 ADAPTOR
2 1 354173 SHANK COUPLING SET 1"
3 2 300135 CLAMP, PUNCH-LOC
4 1 300261 HOSE, INDUSTRIAL WATER 1" I.D.
5 1 300262 NOZZLE, ADJUSTABLE 1"
2” Hose Assembly
ITEM QTY. PART NO. DESCRIPTION
1 1 300183 ADAPTOR
2 1 352718 REDUCER, BELL
3 2 300135 CLAMP, PUNCH-LOC
4 1 301023 HOSE, INDUSTRIAL WATER 2" I.D.
5 1 300266 NOZZLE, ADJUSTABLE 1 1/2"
6 1 351323 NIPPLE, 2" CLOSE
page 1 of 2
Assembly procedure:
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300207 HOUSING BASE
2 1 300216 RING, ADJUSTING
3 1 302912 KNOB, ADJUSTING RING
4 1 300208 DIAPHRAM
5 1 300213 SPRING
6 2 350044 NUT, HEX 1/2-20
7 1 300322 NUT, BIMBA AIR CYLINDER
8 1 025615 HOUSING (UPPER)
9 1 302807 CYLINDER, HYDRAULIC
10 2 354513 SCREW, SET, HALF DOG
11 8 350104 SCREW, CAP 5/16 x 1 1/4
12 1 300209 GUIDE DISK, (LOWER)
13 1 300210 GUIDE DISK, (UPPER)
14 1 300211 BOLT STEM
15 1 350206 WASHER, LOCK 5/8
16 1 300212 WASHER
17 1 300214 STEM NUT
18 2 300215 "O" RING
19 8 350002 WASHER, FLAT 5/16
20 8 350015 WASHER, LOCK 5/16
21 1 354502 "O" RING
NOTES:
1. TORQUE TO 10-12 FT-LBS.
2. TORQUE TO 18-20 FT-LBS.
page 1 of 2
Assembly procedure:
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300207 HOUSING BASE
2 1 300216 RING, ADJUSTING
3 1 302912 KNOB, ADJUSTING RING
4 1 300208 DIAPHRAM
5 1 300213 SPRING
6 2 350044 NUT, HEX 1/2-20
7 1 300322 NUT, BIMBA AIR CYLINDER
8 1 025615 HOUSING (UPPER)
9 1 302807 CYLINDER, HYDRAULIC
10 2 354513 SCREW, SET, HALF DOG
11 8 350104 SCREW, CAP 5/16 x 1 1/4
12 1 300209 GUIDE DISK, (LOWER)
13 1 300210 GUIDE DISK, (UPPER)
14 1 300211 BOLT STEM
15 1 350206 WASHER, LOCK 5/8
16 1 300212 WASHER
17 1 300214 STEM NUT
18 2 300215 "O" RING
19 8 350002 WASHER, FLAT 5/16
20 8 350015 WASHER, LOCK 5/16
21 1 354502 "O" RING
NOTES:
1. TORQUE TO 10-12 FT-LBS.
2. TORQUE TO 18-20 FT-LBS.
page 1 of 2
Location: Varies.
Use: Regulates air to solenoids.
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 026245 CONTROL BOX
2 2 026246 MOUNTING PLATE
3 1 303024 MOD. COMBO, REG., FILT. & VALVE
4 1 352956 SCREW, SELF TAPPING #10 X 1/2”
5 1 GROMMET
6 4 351345 NIPPLE, 1/4” SCH 40 X 0’-2 1/2”
7 1 351351 NIPPLE, 1/4” SCH 40 X 0’-5 1/2”
8 1 351099 FTG. ELL, TBNC, 3/8” X 1/4” F
9 3 352890 FTG. ELL, 1/4” AERO # 2087-4-4S
10 4 300945 VALVE, PRESS PROTECTION
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 33
Back to ALPHA INDEX
Manifold, Tee
Spring, Mounting
b
a
Coupling, Pipe
Valve, Butterfly
Location: Remote monitor & rear spray bar PART NO. SIZE
Use: Control main water supply 300030 3.0"
300031 4.0"
300032 5.0"
300033 6.0"
300035 8.0"
301486 10.0"
302083 12.0"
Actuator, Air
Location: Varies
Use: Control for butterfly valve.
page 1 of 2
page 2 of 2
MOTOR PART NUMBERS
MEGA # MANUFACTURER #
300037 M75C-10-11
300038 M75C-12-11
300039 M75C-15-11
300040 M75C-17-11
300041 M75C-20-11
300042 M75C-22-11
300043 M75C-25-11
300044 M75C-27-11
300045 M75C-30-11
300046 M75C-22-11 (spec.) F230-134
300234 M75C-12-11 BILL OF MATERIALS
300306 M75C-10-11 ITEM QTY. PART NO. DESCRIPTION
301046 M75C-25-11 1 1 300585 RING, SNAP
301084 M75C-10-73 2 1 300586 BEARING, OUTBOARD
301343 M75C-10-11 3 1 300587 RETAINER,SEAL
* 4 1 300588 O-RING
* 5 1 300589 SEAL
6 1 300590 COVER, SHAFT END
7 1 300591 CHECK ASS'Y.
8 2 300592 SEAL, RING
9 4 300593 BEARING, ROLLER
* 10 2 300594 SEAL, POCKET
11 2 300595 PLATE, THRUST
12 1 300596 SHAFT, DRIVE
13 2 300597 GASKET SEAL
*
14 1 GEAR HOUSING
15 2 MATCHED GEAR SET
16 1 300602 PORT END COVER
17 1 300603 WASHER
18 2 300604 PIN
19 1 300605 STUDS OR CAP SCREWS
20 1 300982 SHAFT KEY
21 1 302384 SPACER
22 1 301210 RING, SNAP
* SEAL KIT
#300944
page 1 of 2
Location: Varies
Use: Pumps water from tanker to
spray assembly.
Capacity: Approx. 2200 GPM/35 PSI
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300390 Bracket
* 2 1 300387 Cap, Outer Bearing
* 3 1 300374 Closure, Bearing & Drip Cap
4 1 300372 Gland
5 1 300517 Bolt, Gland w/ Nut
5 1 300518 Bolt, Gland w/ Nut
* 6 1 300516 Shaft (C.W.)
* 7 1 300373 Shaft Sleeve
* 8 1 300384 Bearing (Pump End)
* 9 1 300383 Bearing (Pully End)
10 1 300380 Packing
* 11 1 300008 Sq. Key 1/4""
12 1 300519 Fitting, Grease
* 13 1 300381 Bearing, Spacer
* 14 1 300379 Bearing, Lock Washer
* 15 1 300378 Bearing, Lock Nut
16 1 300392 Volute Case
17 1 300388 Impeller C.W.
18 1 300385 Gasket Case
19 1 300250 Flange, Suction
20 1 300521 Gasket, Suction Flange 8"
21 1 N/A Studs w/ Nuts (Set)
22 1 300522 Flange, Discharge
23 1 300523 Flange, Discharge Gasket, 6"
24 1 300524 Lock Washer, Impeller
25 1 300525 Cap Screw, Impeller
26 1 300526 Lockwasher, Shake Proof
27 1 300558 Slinger, Water
page 1 of 2
Location: Varies.
Capacity: Approx. 850 GPM/50 PSI
page 1 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300391 CASE, VOLUTE
2 1 300385 GASKET, VOLUTE
3 1 300389 IMPELLER
4 1 300390 FRAME
5 1 300387 OUTER GEARING CAP ASSEMBLY
6 1 300374 INNER BEARING CAP
7 1 300372 GLAND
8 2 300517 BOLT, SQ HEAD 3/8-16 x 2 1/2
9 2 300518 NUT, HEX 3/8-16
* 10 1 300516 SHAFT
* 11 1 300373 SLEEVE, SHAFT
* 12 1 300384 BEARING, BALL
* 13 1 300383 BEARING, BALL
14 1 300380 RING, PACKING (SET OF 6)
* 15 1 301008 KEY, 1/4 x 2 1/8
16 1 300528 FITTING, GREASE
* 17 1 300524 LOCKNUT, IMPELLER (C.W.)
* 18 1 300381 SPACER, SLEEVE
* 19 1 300379 WASHER, BEARING LOCKNUT
* 20 1 300378 LOCKNUT
21 1 300558 SLINGER, WATER
page 1 of 2
Location: Varies.
Capacity: Approx. 550 GPM
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 KEY, 1/4"" x 1""
2 1 300387 OUTER BEARING CAP
3 1 300570 FITTING, GREASE
4 1 300571 BEARING, BALL (OUTER)
5 1 300081 SLEEVE, SPACER
6 1 300384 BEARING, BALL (INNER)
7 1 WASHER, BEARING LOCK
8 1 300560 NUT, BEARING LOCK
9 1 SEAL, OIL
10 1 300559 INNER BEARING CAP
11 1 300556 CASE, VOLUTE
12 1 300582 GASKET, BLIND FLANGE
13 1 300581 FLANGE, COMPANION
14 1 300580 WEIGHT, CLACK
15 1 NUT, HEX 3/8-16
16 1 CLACK, RUBBER
17 1 300579 COVER, SUCTION
18 1 CAPSCREW, HEX 3/8-16 x 3/4"
19 1 WEIGHT, CLACK
20 1 350143 NUT, HEX JAM
21 1 300524 RING, RETAINING EXTERNAL
22 1 300575 IMPELLER
23 7 CAPSCREW, HEX 3/8-16 x 1/4" (7 REQ)
24 1 300583 FRAME
25 1 300573 SLEEVE, SHAFT
26 1 300557 SEAL, MECHANICAL SHAFT
27 1 300558 SLINGER, WATER
28 1 300516 SHAFT
page 1 of 2
Location: Varies
Capacity: Approx. 850 GPM/50 PSI
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 302456 CASE, VOLUTE
2 1 300385 GASKET, VOLUTE
3 1 300789 IMPELLER
4 1 300390 FRAME
5 1 302541 OUTER GEARING CAP ASSEMBLY
6 1 300374 INNER BEARING CAP
7 1 300372 GLAND
8 2 300517 BOLT, SQ HEAD 3/8-16 x 2 1/2
9 2 300518 NUT, HEX 3/8-16
* 10 1 301531 SHAFT
* 11 1 300373 SLEEVE, SHAFT
* 12 1 300384 BEARING, BALL
* 13 1 300383 BEARING, BALL
14 1 300380 RING, PACKING (SET OF 6)
* 15 1 301008 KEY, 1/4 x 2 1/8
* 16 1 300528 FITTING, GREASE
17 1 300524 LOCKNUT, IMPELLER (C.W.)
* 18 1 300381 SPACER, SLEEVE
* 19 1 300379 WASHER, BEARING LOCKNUT
* 20 1 300378 LOCKNUT
21 1 300558 SLINGER, WATER
Location: Monitor.
Use: Adjusts control speed for monitor movement.
Switch, Toggle
Strip, Terminal
Switch, Toggle
Fuse, Holder
Nozzle, Monitor
1” Nozzle
CUSTOM MADE
1.5” Nozzle
CUSTOM MADE
Clevis
page 1 of 2
Location: Varies.
Use: Varies.
Clevis
page 2 of 2
PART NO. A B C
300098 1/2"-13" 1/2" 9/16"
300467 5/8"-11" 1/2" 9/16"
300920 1/2"-13" 1/2" 9/16"
300921 3/4"-16" 1/2" 11/16"
300922 5/8"-18" 5/8" 9/16"
300923 3/4"-16" 3/4" 13/16"
300924 3/4"-16" 3/4" 13/16"
Pin, Clevis
page 1 of 2
Pin, Clevis
page 2 of 2
PART NO. A B C D E F
300099 1/8" 1/4" 1/2" 5/8" 1 5/8" 1/8"
300828 1/8" 1/4" 1/2" 5/8" 2" 1/8"
300472 1/8" 1/4" 5/16" 5/8" 1/8"
301068 3/16" 1/4" 5/8" 13/16" 1 5/8" 1/8"
301069 1/4" 1/4" 3/4" 7/8" 1 7/8" 7/64"
301070 1/4" 1/4" 3/4" 7/8" 2 3/16" 7/64"
Valve, Gate
Location: Usually on rear spray bar, but may vary depending on usage. PART NO. SIZE
Use: Varies. 300435 1.25"
300106 1.5"
300107 2.0"
300108 2.5"
Location: Suction load pumps & anti-siphon load. PART NO. SIZE
Use: Connection. 302637 3"
300110 4"
300111 6"
Light, Assembly
Valve, Foot
Valve, Diversion
Cylinder, Air
Location: Varies.
Use: Actuator.
Installation Note:
Direction of flow (Arrow) of valve must
be installed in the same direction as the
existing valve.
Tubing, 1” Plastic
page 1 of 2
Location: Various
page 2 of 2
NOTES:
1. TORQUE TO 10-12 FT-LBS.
2. TORQUE TO 18-20 FT-LBS.
page 1 of 2
Location: Various
page 2 of 2
NOTES:
1. TORQUE TO 10-12 FT-LBS.
2. TORQUE TO 18-20 FT-LBS.
Manifold, Air
Location: Varies. PART NO: FITTING SIZE (1) FITTING SIZE (2)
Use: Branching of air lines.
300119 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 2 HOLE
300200 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 3 HOLE
300201 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 4 HOLE
1
300202 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 5 HOLE
1
300203 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 6 HOLE
300204 0.125 Dia. N.P.T. 0.25 Dia. N.P.T. 7 HOLE
1
2 1
1
1
1
300199 SHOWN 1
2 HOLE 1 1
2
300204 SHOWN
7 HOLE
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 96
Back to ALPHA INDEX
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 97
Back to ALPHA INDEX
Box, Junction
Location: Varies
Use: Wire connection with protection from outside elements.
Alarm, Backup
Location: Top of gooseneck above center line of gooseneck pin. PART NO. SIZE
Use: Transfer of water over gooseneck for front spray system. 300227 3"
300228 4"
Tank, Air
Location: Rear reservoir for service brakes The RE-6 is a dual function valve.
and valve which actuates emergency Under normal braking conditions,
brakes with a loss of air pressure.
it serves the system as a relay
Use: Braking control.
valve applying and releasing the
service brakes.
Emergency
Service
Reservoir 1/4” N.P.T.
1/4” N.P.T.
3/4” N.P.T.
Part Number: 300236
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 103
Back to ALPHA INDEX
Pad, Body
Mudflaps
Valve, Relief
Cable, Varnier
Switch, Toggle
Reel, Hose
HOLDER NOT
INCLUDED
IN HOSE REEL
SEE #006159
Switch, Float
Petcock
Cylinder, Air
Location: Varies.
Use: Actuator for throttle control or to activate hoist valve.
Gauge, Needlemeter
Solenoid, (4 Station)
Location: Varies.
Use: Activating air lines.
Note: Now replaced with single solenoids or rows of up to seven that can be
added to or subtracted from to complete circuit needed per unit. See #303158
page 1 of 2
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300211 BOLT, STEM
2 1 300212 WASHER, BELL
3 1 350006 WASHER, FLAT
4 1 300210 GUIDE DISK (UPPER)
5 1 300208 DIAPHRAGM
6 1 300209 GUIDE DISK (LOWER)
7 1 300215 STEM "O" RING
8 1 300214 NUT, STEM
Solenoid, Pneumatic
Location: Varies.
Use: Control flow in air lines.
Mudflaps
page 1 of 2
PART # A. B C D E F USED ON
300440 36.00 54.00 1.50 6 8.50 51.00
300455 48.00 60.00 2.00 8 7.00 56.00 210M/13K
300469 36.00 53.00
300658 48.00 54.00 1.50 6 8.50 51.00
300700 36.00 67.00 2.00 9 7.0 63.00
300701 36.00 64.00 2.00 8 7.50 60.00
300702 48.00 37.00 2.00 3 8.75 26.25
300713 48.00 60.00 1.00 8 7.25 60.00
300717 24.00 25.00 2.00 3 7.00 21.00
300718 36.00 51.00 1.00 7 7.00 49.00
300720 30.00 30.00 1.50 3 9.00 27.00 MT30/7K
300723 36.00 57.00 1.50 9 6.00 54.00
300726 53.00 60.00 2.00 7 8.00 56.00
300727 53.00 36.00 2.00 4 8.00 32.00
300728 36.00 59.00 1.50 8 7.00 56.00
300729 36.00 48.00 1.50 5 9.00 45.00 769/8K
300730 42.00 46.00 2.06 5 8.50 42.50
300414 24.00 38.00 1.00 6 6.00 36.00
300962 42.00 49.00 2.00 6 7.50 45.00
300963 54.00 58.00 2.00 8 8.00 64.00
300987 28.00 26.25 1.50 3 7.75 22.50
301033 40.00 44.00 1.00 7 6.00 42.00
301075 36.00 50.00 1.00 6 8.00 48.00
301094 36.00 60.00 1.00 8 7.25 58.00
301108 30.00 34.00 2.00 5 6.00 30.00 621/8K
301111 42.00 48.00 1.50 6 7.50 45.00
301184 40.00 52.00 1.00 8 6.00 48.00
301217 36.00 45.00 1.50 6 7.00 42.00
301222 33.00 40.50 2.25 6 6.00 36.00
301272 48.00 63.00 1.50 8 7.50 60.00
301273 48.00 53.75 1.50 7 7.75 50.75
301280 31.00 51.00 1.00 7 7.00 49.00
301281 36.00 34.00 2.00 5 6.00 30.00
301326 40.00 45.00 1.50 7 6.00 42.00
301386 20.00 32.00 2.00 7 4.00 28.00
301413 48.00 55.00 1.50 8 6.50 52.00
301414 30.00 42.25 1.13 5 8.00 40.00
301465 26.00 43.00 1.50 10 4.00 40.00
301466 26.00 51.50 1.75 12 4.00 48.00
301467 6.00 39.00 1.50 9 4.00 36.00
301492 26.00 43.00 1.50 10 4.00 40.00
301505 40.00 62.00 1.50 9 59.00
301527 60.00 45.00 2.00 7 5.88 41.13
301539 36.00 60.00 2.00 8 7.00 56.00
301540 48.00 46.50 1.25 8 5.50 44.00 769/9K
301600 48.00 32.38 1.50 5 5.88 29.38
301601 48.00 24.00 1.50 4 5.25 21.00
301602 30.00 30.00 1.00 4 7.00 28.00 621/8K
301607 42.00 60.00 2.00 8 7.00 56.00
301609 54.00 33.50 1.50 3 8.00 24.00
Mudflaps
page 2 of 2
PART # A. B C D E F USED ON PART # A. B C D E F USED ON
301632 60.00 37.25 1.13 5 7.00 35.00
301657 48.00 48.00 1.50 6 7.50 45.00 303036 36.00 58.00 1.50 8 6.88 55.00
301694 36.00 40.00 2.00 6 6.00 36.00 303038 48.00 56.81 1.50 7 7.69 53.81
301703 24.00 42.00 1.00 5 8.00 40.00 303039 36.00 37.25 1.12 5 7.00 35.00 027232
301707 36.00 41.75 1.50 5 7.75 38.75
301715 54.00 32.50 1.50 4 7.38 29.50 303040 43.63 47.25 1.50 6 7.38 44.25 R40/10K
301720 30.00 36.00 1.50 4 8.25 33.00 303054 26.00 33.75 2.00 5 6.00 30.00 A35
301721 36.00 56.81 1.50 7 7.69 53.81 303084 24.00 30.63 1.81 5 4.50 27.00 JD 862
301866 45.00 48.00 1.50 6 7.50 45.00
303088 80.0 39.00 1.50 6 6.00 36.00 785/MTT30
301891 54.00 35.00 3.00 3 8.00 24.00 330/18K
301892 30.00 31.00 1.50 4 7.00 28.00 615/6.5K 303134 48.00 64.88 1.44 8 7.75 62.00 028200
301897 36.00 46.50 1.25 8 5.50 44.00 303179 60.00 44.00 1.00 7 7.00 42.00 W170/MTT25
301904 48.00 33.00 1.50 4 7.50 30.00 303180 24.00 70.00 1.50 8 8.38 67.00 150BD/776
301909 48.00 84.00 SEE DWG
301910 8.00 12.00 2.00 0 8.00 8.00 303187 34.00 34.00 2.00 5 6.00 30.00 009804
301931 48.00 32.38 1.50 4 7.25 29.00 303257 68.00 42.00 1.00 5 8.00 40.00 789/33K
301932 48.00 38.63 1.50 5 7.13 35.63 303283 36.00 30.00 1.00 5 7.00 28.00 D250DSH
301964 60.00 46.50 1.50 6 6.75 40.50
302002 48.00 36.00 1.69 6 7.44 44.63 303386 45.50 30.00 1.50 3 9.00 27.00 D300BSTR
302054 54.00 34.00 1.00 4 8.00 32.00 303408 100.00 48.00 1.50 6 7.50 45.00 793/53K
302368 28.00 27.00 1.50 3 8.00 24.00 303414 41.00 30.00 1.50 3 9.00 27.00 D250SH
302387 24.00 60.00 2.00 8 7.00 56.00
302432 48.00 43.00 1.50 5 8.00 40.00 303421 69.00 31.50 0.75 6 5.50 30.00 773D
302472 40.00 41.50 1.50 7 5.50 38.50 303431 96.00 48.00 1.00 9 5.75 46.00 D685E
302536 48.00 65.63 1.81 8 7.75 62.00 303440 48.00 30.00 1.50 3 9.00 27.00 773D
302538 48.00 67.00 2.00 9 7.00 63.00
302543 36.00 46.63 2.06 5 8.50 42.50
302544 29.50 46.63 2.06 5 8.50 42.50
302549 36.00 44.00 2.00 5 8.00 40.00
302566 40.00 36.00 1.50 4 8.25 33.00
302567 48.00 100.00 2.00 8 12.00 96.00
302608 48.00 84.00 1.75 7 11.50 80.50
302610 40.00 60.00 1.50 4 14.00 42.75
302627 48.00 66.00 2.00 8 7.75 62.00
302633 48.00 36.00 2.00 4 8.00 32.00
302634 36.00 36.00 1.50 4 8.25 33.00
302636 60.00 34.00 2.00 5 6.00 30.00
302676 54.00 34.00 2.00 5 6.00 30.00 D400E
302677 78.00 34.00 2.00 5 6.00 30.00
302678 48.00 34.50 1.00 4 8.13 32.50
302687 48.00 60.00 1.50 4 14.25 57.00
302722 48.00 34.00 2.00 5 6.00 30.00
302745 48.00 70.00 1.50 8 8.38 67.00 330/20K
302755 36.00 60.00 1.50 8 7.13 57.00
302811 48.00 45.00 2.00 8 5.13 41.00
302896 33.00 54.00 2.00 6 8.00 48.00
302921 90.00 48.00 1.00 8 5.75 46.00 789/30K
302922 84.00 42.00 1.00 5 8.00 40.00 789/30K
302937 48.00 37.25 1.13 5 7.00 35.00
302938 48.00 38.00 1.00 6 6.00 36.00
Valve, Base
Location: Varies
Use: Allows solenoid to activate different oil ports
Valve, 4 Way
Strainer, Fuel
Chamber, Air
Primer, Pump
Location: Varies
Use: Primes B3-B4 pump for use as suction loading operations when pump is set for that operation.
Location: Varies.
Use: Conversion of various water equipment
configurations to accept the
MEGA MAGNUM Spray head.
Gauge, Air
Unloader
Valve, Ball
Nozzle, Foam
Location: Monitor.
Use: Manually adjustable from fog to steam. Allows induction of foam agent into water stream.
SEE # 302560
VERTICAL MOTION
Part Number: 300710
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 144
Back to ALPHA INDEX
Coupling, Shank
Location: Varies
Use: Back-up/Work Light
Socket, Relay
Bulb, Replacement
Location: Varies
Use: Replacement for #300777
page 1 of 2
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
* 1 1 301687 KEY, 1/2 Z 4
* 2 1 300536 RING, RETAINING
* 3 1 300542 RING, THRUST
4 1 300531 BRACKET
* 5 1 300537 BEARING, BALL (INNER)
6 1 300539 INNER BEARING CAP
* 7 1 300541 SLINGER, WATER
8 1 300535 SLEEVE, SHAFT
9 1 300719 RING,PACKING (SET OF 4)
10 12 350283 CAPSCREW, HEX 5/8-11X1 1/2
11 1 300552 GASKET, VOLUTE
12 1 301098 CASE,VOLUTE
13 1 301103 WASHER, IMPELLER
14 1 300551 WASHER, LOCK
15 1 300549 SCREW, IMPELLER 1/2-13 X 1 1/2
16 1 301101 RING, WEARING
17 1 301097 IMPELLER
18 1 301099 RING, BALANCE
19 1 300540 BUSHING, THROAT
20 1 300543 RING, LANTERN
21 4 302298 STUD, 3/8-16 X 1 3/8
22 4 350025 NUT, HEX 3/8-16
23 1 300533 GLAND, PACKING
24 2 354187 BOLT, SQ. HEAD 1/2-13 X 2 3/4
* 25 2 300363 NUT, HEX 1/2-13 X 2 3/4
* 26 1 300538 BEARING, BALL (OUTER)
27 1 300525 OUTER BEARING CAP ASSEMBLY
* 28 1 300534 SHAFT
Cylinder, Steering
Solenoid, 12 Volt
Location: Varies
Use: Control flow in air lines.
Pin, Gooseneck
Pin, Assembly
page 1 of 2
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 301098 VOLUTE CASE C.W.
2 1 300552 GASKET, CASE
3 1 301097 IMPELLER C.W.
4 1 302292 BRACKET
5 12 350283 CAP SCREW
6 4 350025 NUT, HEX
7 4 302298 STUD
8 2 354187 BOLT, SQUARE HEAD
9 2 300363 NUT, HEX
* 10 1 302293 SHAFT C.W.
* 11 1 300535 SLEEVE, SHAFT
* 12 1 302297 BEARING, BALL (INNER)
* 13 1 302296 BEARING, BALL (OUTER)
14 1 302294 CAP, INNER BEARING
15 1 300527 VALVE, AIR VENT
16 1 350852 PLUG, PIPE
17 1 350850 PLUG,PIPE
18 1 301103 LOCK WASHER (IMPELLER)
19 1 300549 CAP SCREW (IMPELLER)
20 1 300551 LOCK WASHER, SHAKE PROOF
21 1 302299 SHAFT SEAL, MECH.
22 1 302300 O-RING
* 23 1 302301 RING, RETAINING
24 1 300541 SLINGER, WATER
* 25 1 300536 RING, RETAINING
* 26 1 300542 RING, THRUST
27 1 300545 GASKET, BALANCE RING
* 28 1 303212 RING, BALANCE
29 1 301101 RING, WEAR
30 1 302295 RETAINER, MECH. SEAL
31 1 302302 SEAL, OIL LIP
* 32 1 302304 SEAL, LIP OIL
33 1 302305 CAP, OUTER BEARING
* These parts make shaft 34 301927 COUPLING
Coupling, Spline
Location: Varies
Use: Relieves excess pressure back to return or tank.
Nozzle
page 1 of 2
Number: 302001
Part Number:
Part
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 166
Back to ALPHA INDEX
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
* 1 1 302006 SHAFT
* 2 1 302482 RING, RETAINING
* 3 1 302183 RING, RETAINING
15 * 4 1 302450 BEARING, BALL (OUTER)
14
5 1 302453 OUTER BEARING CAP
* 6 1 302448 SLEEVE, SPACER
13
7 1 302004 FRAME
6 4 3 * 8 1 302449 BEARING, BALL (INNER)
9 1 300379 WASHER, LOCK
12 11 10 9 8 7
5 2 10 1 302451 INNER BEARING CAP
1 11 1 300558 SLINGER, WATER
12 1 302452 SEAL, MECHANICAL SHAFT
13 8 350145 CAPSCREW, HEX 3/8-16 x 1""
14 1 300385 GASKET, VOLUTE
15 1 300391 CASE, VOLUTE
16 1 302480 LOCKNUT, IMPELLER
17 1 300389 IMPELLER
* 18 1 302484 RING, RETAINING
* 19 1 302447 SEAL, OIL
20 1 300378 LOCKNUT
21 1 302446 SEAL, OIL
* 22 2 302009 WASHER, THRUST
* 23 1 300373 SLEEVE, SHAFT
16
22
21
* These parts make shaft replacement
23
kit #302485
18 19 20
17
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 167
Back to ALPHA INDEX
Filter, Fuel
Swivel, Flanged
page 1 of 2
Location: Varies
Use: Driving water pumps.
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300585 RING, SNAP
2 1 300586 BEARING, OUTBOARD
3 1 300587 SEAL, RETAINER
4 1 300588 O-RING
5 1 300589 SEAL
6 1 300590 COVER,SHAFT END
7 1 300591 CHECK ASS'Y.
8 2 300592 RING SEAL
9 4 300593 BEARING, ROLLER
10 2 300594 SEAL, POCKET
11 2 300595 PLATE, THRUST PLATE
12 1 302220 SHAFT, DRIVE
13 2 300597 SEAL, GASKET
14 1 HOUSING, GEAR
15 2 MATCHED GEAR SET
16 1 300602 COVER, PORT END
17 1 300603 WASHER
18 2 300604 PIN
19 1 300605 STUDS OR CAP SCREWS
20 1 302384 SPACER
21 1 301210 RING, SNAP
22 301927 COUPLING
SEAL KIT #30094
PUMP PART NUMBERS
MEGA # MANUFACTURER #
302072 M75C-10-7
302073 M75C-12-7
302074 M75C-15-7
302075 M75C-17-7
302076 M75C-20-7
302077 M75C-22-7
302078 M75C-25-7
302079 M75C-27-7
302080 M75C-30-7
page 1 of 2
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
* 1 1 302006 SHAFT
2 1 302482 RING, RETAINING
3 1 302183 RING, RETAINING
4 1 302450 BEARING, BALL (OUTER)
5 1 302453 CAP, OUTER BEARING
6 1 302448 SLEEVE, SPACER
7 1 302004 FRAME
* 8 1 302449 BEARING, BALL (INNER)
* 9 1 300379 WASHER, LOCK
* 10 1 302451 INNER BEARING CAP
11 1 300558 SLINGER, WATER
12 1 302452 SEAL, MECHANICAL SHAFT
13 350144 CAPSCREW, HEX 3/8-16 x 1"
14 1 300385 GASKET, VOLUTE
15 1 350025 NUT, HEX 3/8-16
16 1 300580 WEIGHT, CLACK
17 1 300581 FLANGE, COMPANION
18 1 300582 GASKET, BLIND FLANGE
19 1 300556 CASE, VOLUTE
20 1 CLACK, RUBBER
21 1 WEIGHT, CLACK
22 1 CAPSCREW, HEX 3/8-16 x 3/4"
23 1 300579 COVER, SUCTION
24 1 302480 NUT, HEX
25 1 300575 IMPELLER
26 1 CAPSCREW, HEX 3/8-16 x 1/4"
27 1 302484 RING, RETAINING
* 28 1 302447 SEAL, OIL
* 29 1 300378 LOCKNUT
* 30 1 302446 SEAL, OIL
* 31 1 302009 WASHER, THRUST
* 32 1 300373 SLEEVE, SHAFT
33 301927 COUPLING
* These parts make shaft
replacement kit #302485.
Part Number: 302430
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 174
Back to ALPHA INDEX
SEE #300710
LATERAL MOTION Part Number: 302560
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 175
Back to ALPHA INDEX
page 1 of 2
page 2 of 2
BILL OF MATERIALS
ITEM QTY. PART NO. DESCRIPTION
1 1 300392 Case,Volute
2 1 300385 Gasket, Volute
3 8 350144 Stud, 3.8 - 16x1 1/2
8 Nut, Hex 3/8 - 16
4 1 302004 Frame
5 1 300388 Impeller
6 1 302480 Locknut, Impeller
7 1 302451 Cap, Inner Bearing
* 8 1 302481 Locknut
* 9 1 302448 Sleeve, Spacer
* 10 1 302006 Shaft
11 1 302452 Seal,Mechanical Shaft
* 12 1 300373 Sleeve, Shaft
001 * 13 1 302449 Bearing, Ball
* 14 1 302450 Bearing, Ball
* 15 1 302482 Ring, Retaining
* 16 1 302083 Ring, Retaining
17 1 302009 Ring, Thrust
* 18 1 302453 Cap, Outer Bearing
19 1 302446 Seal, Oil
20 1 302447 Seal, Oil
* 21 1 300379 Lock Washer, Bearing,
22 1 302484 Ring, Retaining
23 1 300558 Slinger, Water
24 301927 Coupling
Gauge, Fuel
Joystick, Universal
Location: Varies
Use: Control flow in air lines.
page 1 of 2
page 2 of 2
Housing, Filter
WATER PUMP
Warning: Do not operate water pump without water in the volute case.
Lubrication: Pump should be lubricated every 400 hours
or 3 months which ever comes first, using Shell Alvania #2
bearing grease or a comparable substitute.
Stuffing Box: The stuffing box must not be run dry as it is water lubricated.
Before pump is started for the first time, loosen gland nuts and re-tighten
finger tight. Tighten nuts evenly until water is coming out of the stuffing box in
droplet form. Water must not be spraying or running out of the stuffing box in
a continuous stream. To maintain the recommended flow rate for cooling &
lubrication, periodic adjustment is recommended. Grease Points
Re-packing: If packing gland is tightened to the limit of travel, additional packing is required. Stop pump, remove
packing gland nuts and insert one or more packing rings as required. Replace gland nuts and adjust for proper
leakage. If additional packing does not prevent excessive leakage, a complete re-packing is necessary. Remove
gland nuts and gland. Remove old packing, using a packing hook or stiff wire. If the new packing is in coil form,
cut rings to fit completely around shaft. Do not place continuous coil of packing into box. Place rings into
stuffing box so that joints are staggered at 90° apart. After stuffing box is completely packed, replace, then
adjust gland nuts and operate pump. Packing must be allowed to wear in. Adjust packing gland for proper leakage.
Replacement: KEYED SHAFT PUMP - Disconnect coupling. Remove old pump and install new pump. Check
the alignment of the coupling in four (4) places 90° apart. Maximum misalignment is 1/32”.
Tighten coupling clamp bolts to 13 ft-lbs.
FLANGE MOUNT PUMP - Remove four (4) bolts retaining motor to pump housing and remove
motor. Align new motor with spline coupling inside pump housing and push into position.
Replace four (4) bolts and torque to 72-ft.lbs.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 196
Back to ALPHA INDEX
COUPLING
Lubrication: None required.
HYDRAULIC MOTOR
Lubrication: Lubrication is by the hydraulic oil passing through the motor.
Hydraulic Fluid: A good quality hydraulic oil is essential to satisfactory performance
and long life of any hydraulic system. Before starting for the first time, the hydraulic
fluid and filters should be changed and the complete hydraulic system flushed. The
viscosity of the fluid used should be 150 to 220 SSU @ 100°F. Any oil added to the
system should be filtered through a 100 mesh screen. Filters should be cleaned at
regular intervals. In the case that the oil becomes contaminated, the fluid and filters
must be changed and the system flushed.
Replacement: KEYED SHAFT PUMP - Remove and plug hydraulic lines. Disconnect coupling. Remove old
hydraulic motor and install new motor. Replace coupling and check alignment in four (4) places
90° apart. Maximum amount of misalignment is 1/32”.
FLANGE MOUNT PUMP - Remove four (4) bolts retaining motor to pump housing, and remove
motor. Align new motor with spline coupling inside pump housing, and push into position.
Replace four (4) bolts and torque to 72 ft-lbs.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 197
Back to ALPHA INDEX
Preventative maintenance should be practiced on the water tank components as well as the prime mover.
The condition of the air and hydraulic lines and all hardware pertaining to the unit should be checked periodically.
CAUTION: Pump should be engaged at engine idle only & only if water exists in the tank.
MAGNUM CONTROL PANEL - NEW STYLE
Front Controls
The control panel consists of rocker switches for engaging power to the pump,
spray heads, foam injector, work light and intermittent spray mode. It can also
be equipped with a water level gauge,a gauge adjustment knob and
high & low indicators. A timer is on the panel for setting intermittent timing.
Complete version
Top Controls (Options vary)
The top controls consist of a rocker switch for opening water supply to the remote monitor
and a directional control switch to adjust vertical and horizontal movement of the monitor.
Top View
Notes: 1. The above control panel is a complete version. Graphics are for reference only,
Options may vary. may not represent every unit or model.
2. Spray volume is controlled by engine rpm.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 198
Back to ALPHA INDEX
Front View
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 199
Back to ALPHA INDEX
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 200
Back to ALPHA INDEX
Upper Controls
The upper control panel consists of a toggle switch for opening the water
supply to the remote monitor and a directional control switch to adjust
vertical and horizontal movement of the monitor.
Lower Controls
The lower control panel consists of lever air switches used to turn the air
supply on & off for actuation of spray heads. The air control valve is used
to turn on & off an air cylinder or a butterfly valve.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 201
Back to ALPHA INDEX
Spray Density:
3/8” and 1/4”
openings
The density can be set at either a 3/8” opening or a 1/4”opening by loos-
ening the adjusting knob and rotating the adjusting ring. If a lower density is
required, (other than the the two settings just mentioned) the adjusting ring 360 degree
can be turned over. The opening can then be set at any height. To do this, direction control
simply unbolt the spray head and flip the ring 180 degrees. from 3/8” bolts on
underside
Spray Direction:
Controlling the direction of the spray is done by simply loosening two 3/8”
bolts that mount the spray head. The spray head can be rotated
360 degrees each side of center.
Variable width setting allows
for spray width control
Spray Width:
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 202
Back to ALPHA INDEX
3.Water runs out of spray head with pump on and sprayhead switch not engaged:
a) Insufficient air pressure.
b) Diaphragm could be ruptured or leaking air (replacement per drawing #300198 in the parts book).
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 203
Back to ALPHA INDEX
1. Fill the foam agent tank with regular AFFF concentrates or Polar Solvent type AFFF
foam agent.
2. With the water tank full, the nozzle should be pre-set for the percentage of foam to
water. The Hydro-Foam Nozzle Venturi on the monitor (water cannon) is preset at
6% proportioning, but can be changed to 3% or 1 %, but 6% is the most widely used.
Select the percentage most likely desired.
3. Turn the water pump on, increase engine RPM, turn water on at the monitor, then
turn the switch to the foam agent tank on. Within seconds, the foam agent will be
injected into the water stream, spraying foam on the desired subject.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 204
Back to ALPHA INDEX
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 205
Back to ALPHA INDEX
• Move the system switch to the on position, this energizes all switches on the control panel.
• Move the intermittent control switch on the control panel to the intermittent operation position.
• Set the timer for the time in seconds for the spray intervals you wish to select as follows:
1. Using the minus buttons above the number/alpha pads and the plus buttons below the
number/alpha pads. Minus pads decrease the numbers or alpha letters, the plus buttons
increase the number or alpha letters. Adjust the times as follows:
2. Set the first digit to (B).
3. Set the next three digits for the seconds interval you wish to select for your spraying
interval. (Example 015 = 15 second intervals, 045 = 45 second intervals).
4. Set the 5th digit to (S).
5. Engage your water pump with the engine RPM at low idle only, and increase engine RPM
to full RPM in the gear that will give you the speed you need for the area you are spraying.
6. Select the spray head valves you wish to spray from and move those
switches to the on position, this will shut off the air holding the valve shut, and will allow it
to spray.
7. When you are finished with the intermittent operation, simply move the intermittent control
switch to the constant postion, and this will end the intermittent operation.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 206
Back to ALPHA INDEX
• Move the system switch to the on position, this provides power to the control box
and all of the switches on it.
• Select which function you need to use and move that switch to the on position.
• When finished move all switches to the off position and move the system switch to
off. This will remove power from the box in case a switch should accidentally be
bumped into the on position. It will not affect anything as there will be no power
applied to the switch.
• The system switch on the control panel must be moved to the on position,
this will provide power to the water level gauge.
• The water level gauge will now show the water level in the tank.
MEGA Corporation • 700 Osuna Road, NE • Albuquerque, NM 87113-1037 • Phone: (505) 345-2661
www.megacorpinc.com • P.O. Box 26146 • Albuquerque, NM 87125 • General Parts Fax: (505) 345-6190 • E-mail: parts@megacorpinc.com 207