The document discusses a contactor logic pin that can assign a DC module to one of six possible loads. To assign the module to a load, the CNT pin must first be energized to approximately +8VDC, and after assignment the pin voltage will change to -14VDC.
The document discusses a contactor logic pin that can assign a DC module to one of six possible loads. To assign the module to a load, the CNT pin must first be energized to approximately +8VDC, and after assignment the pin voltage will change to -14VDC.
The document discusses a contactor logic pin that can assign a DC module to one of six possible loads. To assign the module to a load, the CNT pin must first be energized to approximately +8VDC, and after assignment the pin voltage will change to -14VDC.