Professional Documents
Culture Documents
Snap Ups (Tiger) : Assembly Instructions
Snap Ups (Tiger) : Assembly Instructions
Snap Ups (Tiger) : Assembly Instructions
Snap ups
This is a fun paper craft of a cute tiger, that springs up into the
air. Push the tiger's body from the side to make him flat, hold
him down with your finger, then quickly let go and watch how
the rubber band makes him jump! Adjust the way you control
him to make him spin, or pop upright like he's woken up from a
jungle slumber. When you finish construction, put it inside a
book or card to give someone a surprise when they open it up!
Cut in line
Caution
Make a cut.
Handy Trace along the folds with a used pen (no-ink) to get a sharp, easier fold.
Hints
PAGE01
Snap ups (Tiger): Assembly Instructions
1 2 3
m
Botto
4 5 6
If you cut the ends of the elastic band on an angle
they will be easier to thread.
Upper body
Lower body
Fold the lower body in half and glue it Glue the lower body into the upper body. Thread in an elastic band and tie it with a
*When attaching the belly parts to the body, glue one side
together. and then thread the elastic band through the hole. double knot.
*These assembly instructions use the large tiger as a model. Follow the same steps to make the small one.
Finish off the model by gluing
on the head and tail.
How to play
Push the body from the side to flatten him
out.
PAGE02