3x60 MW TPS EXPANSION PROJECT-KORADI a
LARSEN & TOUBRO LIMITED Page |
RECORD OF WELDER QUALIFICATION TEST
Welder Name : RABINDRA NAYAK Welder No, Lat / AW-113
Using WPS No. WPS/15 /Rev. 0 Welding Date :29/11/2012
The above welder is qualified forthe following ranges
Variable Actual Values Qualified Range
Welding process GTAW:SMAW. GTAW+SMAW
Welding Type MANUAL MANUAL
Backing NO WITH or Without_BAGRING
Material spec. (P-No) ergy
“Thickness Groove 891m
Fillet Se
Diameter Groove ed
Fillet =
Filler Metal Spec/Class L as7e8 526/55
228/55
FNo, os ALL 6) 1,2.3.4(With backing)
Welding Position aa
Weld Progression ei UPHILL
DOEN/DOEP
Gas type / Backing gas ‘Argon
Welding current type / polarity OCEN/ DOEP 1
‘Mode of metal transfer waa
Direct/Remate visual control (a 7
YWSUAL TESTRESUUTS |
\GRAPHIC TEST RESULTS
Rea RRNATIVE QUALIFICATION OF GROOVE WELDS BY RADIOGRAP ES)
Yogrannc Repor No: LTAVAT/ 2, 4 Date: 28.1.1
Result Ascepted
FILLET WELD TEST RESULTS,
ture Test: NA__
sth and Percent of Defects NA mm___NA, %
0 Test Fusion Report No,
cent ay mm BY mm. Convexily mm. or Concaviy mm
conducted by L & T TPPC Division Laboratory Test No. N/A
SAY Ina the statemont inthis record are correct and thal he test welds were Prepared,
‘and tested in accordance withthe requirements of ASME See ix
L&T TPPC QA/QC LMBPL Qa/QC
z Prva Baran ok tshy
‘ATURE Bovfvsfp
a
z Tn|SECOND TIME QUALIFICATION
[AT Report No
VARIABLES
Welding process
Welding Type
[Backing
Material speo,
P Number
[Thickness
[Diameter
Filler Metal SpeciClass
Date: 22.2,
ACTUAL VALUES
13 [RT Result: Agepca
(QUALIFIED RANGE
GtRw+
om
we
a aw
Welaing Position
IGas type /Backin
Reviewed By
Lat TPPC GwaC
[THIRD TIME QUALIFICATION
RT Report No
Lar wlll
[DATES
ACTUAL VALUES
AT Result:
(QUALIFIED RANGE,
VARIABLES.
Welding process,
[Weiging Type.
[Backing
Material spee,
IP Number
Thickness
Diameter
Filer Metal SpeciClass
Without Backing
Wh Backing:
lWelding Postion
[Gas type / Backin
[Reviewed By
LaT TPPC awac
[FOURTH TIME QUALIFICATION
[RT Report No
‘VARIABLES
Welding process,
Wetding Ty
Backing
Waterial spec.
IP Number
Thickness
Diameter
Filer Metal Spec/Class
L&T MHI QA/ac
DATE:
ACTUAL VALUES
[RT Result:
QUALIFIED RANGE.
jivout Backing:
th Backing
Welding Position,
Gas type / Backin
Reviewed By
a5
LaT TPC Qwac Lact MHI QA/OCCERT. No, JHAW/.12. 875 V7:
FORM NO. XIII bate. 16/08/2017
Qualified Boiler Welder's Certificate
ISSUED UNDER
THE INDIAN BOILER REGULATIONS, 1950
Name of Welder
Father's Name
Date of birth
t hand thunt:
Identification marks
Weight sce
Lefthand Thumb Impression ray -6
Sealand Signatureof ee Kekgyte eel
Competent Authority, Vist. om ° z
‘ : Address of Welder +jley, ladsanapur,
LG. ieY Jadsanapur,
PERIOD OF VALIDITY
From To
3.2017
This is to certify that Shiri... 77%. son
of Shri... 12 has
been examined and tested in the prescribed maninerin the presence of...»
‘oiler Snax ’hana, Dinanbad,
chie= inspects:
(Representative cf Competent Authority)
and is deemed to have satisfactorily proved his ability to make sound welds as per particulars given
overleaf and is hereby authorised to undertake such welds. He is authorised/netuthiorised to
undertake welding where radiographic examination is necessary under the Regulations.
GRANTED this... 45.22 day of......nazeh 20.42 cone NOE
the seat and authority of... Demi nue, SO GES Thon ene et
Competent Authority
Peseta iat