Professional Documents
Culture Documents
FMC Core Drilling Pumps Catalog
FMC Core Drilling Pumps Catalog
FMC Core Drilling Pumps Catalog
Core Drilling
and Mining
The durability of the FMC Technologies “Bean”
piston pumps is unsurpassed within the vertical
drilling markets. Designed for continuous duty
applications, the FMC Technologies “Bean” piston
line increases drilling productivity while lowering
the overall cost of ownership. The pump’s simple
design incorporates less wearable components and
ease of service. FMC Technologies self-cleaning
and erosion resistant valve technology enables
the pumps to handle the most abrasive and
stringy fluids within the industry. Each drilling
activity requires enhancing certain conditions and
criteria to maximize drilling performance. This
customization has let FMC technologies pumps
to become the leader within the surface and
underground coring, water well, geotechnical and
the environmental drilling markets with its “BEAN”
piston pump product line.
Reciprocating Pumps
FMC Technologies’ reciprocating pumps have provided exceptional performance and value
since their introduction in 1884. As a pioneer and global leader in providing high-pressure fluid
pumping solutions within a variety of
markets, FMC Technologies offers a broad
array of high pressure piston and plunger
reciprocation pumps within the industrial,
oil and gas, sewer cleaning, horizontal
and vertical drilling, reverse osmosis and
agricultural markets.
Notes:
1. Ratings are based on nominal speeds and
pressures and may vary on FMC Technologies
written approval.
2. Capacities and speeds indicated are based on
100% volumetric efficiency.
3. Continuous Duty is described as 8 hours or
more operation per day, daily for extended
periods of time.
4. Dimensions are approximate and based
on standard pump models with cast fluid
cylinders. Width is measured parallel to the
axis of the drive shaft and does not include the
shaft extension.
HP Pump Specifications ( Pump Selection Formula Fold-Out )
n
tio
rs
y
y
si)
ut
de
ut
lu
)
(p
in
y sD
vo
in
y nt
r(
e
yl
Re
r
cit ou
cit tte
te
fC
su
s
rie
er
e
pa nu
es
pa mi
)
ro
am
(in
p
Se
Pr
Ca nti
Ca ter
ns
be
Di
ke
el
p
Co
d
In
llo
m
od
m
te
ro
al
Nu
Ga
Pu
Ra
Se
St
M
A0410 900 4.25 GPM @ 400 RPM 5.31 GPM @ 500 RPM 0.0106 1.250 2 1.00
A04
A0411 750 5.14 GPM @ 400 RPM 6.43 GPM @ 500 RPM 0.0129 1.375 2 1.00
2.6/3.2 HP
A0413 550 7.18 GPM @ 400 RPM 8.98 GPM @ 500 RPM 0.0180 1.625 2 1.00
I0410 900 4.25 GPM @ 400 RPM 5.31 GPM @ 500 RPM 0.0106 1.250 2 1.00
I04
I0411 750 5.14 GPM @ 400 RPM 6.43 GPM @ 500 RPM 0.0129 1.375 2 1.00
2.6/3.2 HP
I0413 550 7.18 GPM @ 400 RPM 8.98 GPM @ 500 RPM 0.0180 1.625 2 1.00
E0410 1,000 9.56 GPM @ 450 RPM 12.22 GPM @ 575 RPM 0.0212 1.250 4 1.00
E04
E0411 825 11.57 GPM @ 450 RPM 14.78 GPM @ 575 RPM 0.0257 1.375 4 1.00
6.7/8.5 HP
E0413 600 16.16 GPM @ 450 RPM 20.65 GPM @ 575 RPM 0.0359 1.625 4 1.00
L0913 1,325 12.60 GPM @ 750 RPM 15.00 GPM @ 890 RPM 0.0606 1.625 3 2.25
L09
L0914 1,150 14.60 GPM @ 750 RPM 17.40 GPM @ 890 RPM 0.0703 1.750 3 2.25
11.6/13.8 HP
L0918 700 24.20 GPM @ 750 RPM 28.70 GPM @ 890 RPM 0.1162 2.250 3 2.25
W11 W1118 1,500 29.50 GPM @ 750 RPM 35.5 GPM @ 900 RPM 0.1420 2.250 3 2.75
25/36 HP W1122 1,000 44.20 GPM @ 750 RPM 53.0 GPM @ 900 RPM 0.2121 2.750 3 2.75
L1114 2,500 21.50 GPM @ 900 RPM 30.40 GPM @ 1275 RPM 0.0859 1.750 3 2.75
L11
L1118 1,500 35.50 GPM @ 900 RPM 50.30 GPM @ 1275 RPM 0.1420 2.250 3 2.75
37/52 HP
L1122 1,000 53.00 GPM @ 900 RPM 75.10 GPM @ 1275 RPM 0.2121 2.750 3 2.75
L12 L1222 1,000 71.00 GPM @ 325 RPM 88.00 GPM @ 400 RMP 0.2314 2.750 3 3.00
L1614 3,250 34.90 GPM @ 1100 RPM 46.80 GPM @ 1475 RPM 0.1249 1.750 3 4.00
L16 L1616 2,500 45.60 GPM @ 1100 RPM 61.10 GPM @ 1475 RPM 0.1632 2.000 3 4.00
78/105 HP L1618 1,975 57.70 GPM @ 1100 RPM 77.30 GPM @ 1475 RPM 0.2065 2.250 3 4.00
L1622 1,300 86.10 GPM @ 1100 RPM 115.50 GPM @ 1475 RPM 0.3085 2.750 3 4.00
te
ee
l
ee
ze
St
sS
St
y
St
on
nc
ss
es
l
on
ee
on
Br
cie
nl
n
nl
rb
St
rb
ai
o
um
ffi
ai
Ca
Ir
St
ss
Ca
St
lE
in
s)
ile
le
pe
d
)
ca
lb
d
)
um
)
(in
n
(in
ge
ge
ct
(in
ge
ge
ai
Ty
t(
ni
Du
or
or
Al
St
th
or
or
ht
ha
gh
th
p
I- F
I- F
ng
-F
-F
ig
m
st
st
st
id
ec
ei
HP
HP
AP
AP
He
Ca
Ca
Ca
Pu
W
W
Le
M
49 PISTON 5.60 8.00 20.50 85%
49 PISTON 5.60 8.00 20.50 90%
49 PISTON 5.60 8.00 20.50 85%
45 PISTON 16.50 8.00 7.50 85%
45 PISTON 16.50 8.00 7.50 85%
45 PISTON 16.50 8.00 7.50 85%
100 PISTON 9.0 8.50 17.50 85%
100 PISTON 9.0 8.50 17.50 85%
100 PISTON 9.0 8.50 17.50 85%
229 PISTON 24.75 12.25 11.00 85%
229 PISTON 24.75 12.25 11.00 85%
229 PISTON 24.75 12.25 11.00 85%
405 PISTON 31.0 16.00 13.5 85%
405 PISTON 31.0 16.00 13.5 85%
443 PISTON 32.50 16.00 13.50 85%
443 PISTON 32.50 16.00 13.50 85%
443 PISTON 23.50 16.00 13.50 85%
551 PISTON 35.00 18.00 12.75 85%
681 PISTON 39.25 17.50 15.50 85%
681 PISTON 39.25 17.50 15.50 85%
681 PISTON 39.25 17.50 15.50 85%
681 PISTON 39.25 17.50 15.50 85%
A04
Standard Cast ISO Drawing Specifications
Pump Model A04 (metric)
Configuration A04 Vertical Duplex Piston
Number of Pistons 2
Stroke Length 1.0 Inches (2.54 cm)
Frame Load Rating 1,140 lbs (517 kg)
Pump Weight (Average) 43 lbs (19.5 kg)
Direction of Rotation Either
Internal Gear Ratio NA
Intermittent Duty Speed Rating 500 RPM
Continuous Duty Speed Rating 400 RPM
Ball Valve Max Speed Rating NA
Minimum Speed 300 RPM
Mechanical Efficiency 90%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 1 Quart (.96 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size 1.00 Inch NPT
Standard Discharge Size 0.50 Inch NPT
0.75 Inch NPT
Fluid End Material Cast Iron, Aluminum Bronze
Valve Types Disc Valves
Hydraulic Motor Mount SAE A - 2 Bolt with 7/8”-13T
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 300 RPM 350 RPM 375 RPM 400 RPM 500 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
A0410 1.250 / 3.175 0.0106 / 0.0401 850 / 62.05 3.19/ 12.08 3.72 / 14.08 3.98 / 15.07 4.25 / 16.09 5.31 / 20.10
A0411 1.375 / 3.493 0.0129 / 0.0488 750 / 51.71 3.86/ 14.61 4.50 / 17.03 4.82 / 18.25 5.14 / 19.46 6.43 / 24.34
A0413 1.625 / 4.128 0.0180 / 0.0681 550 / 37.92 5.39/ 20.4 6.28 / 23.77 6.73 / 25.48 7.18 / 27.18 8.98 / 33.99
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
9
A04
Cast Pump Engineering Dimensional Outline
A0413
15 RPM A0411
water to the liquid being pumped by dividing the published
A0410
NPSHr value by the specific gravity of the liquid being pumped.
10 • FMC published NPSHr values are based on test data collected
on specific pumps at the factory and are estimated values.
5
Actual NPSHr values for an ordered pump can only be
determined by a factor test. For NPSH critical applications,
contact the factory for additional information and request an
0 NPSHr test performed on your pump before shipment.
300 400 500 600
• Pump drawing dimensions in inches.
I04
Standard Cast ISO Drawing Specifications
Pump Model I04 (metric)
Configuration I04 Horizontal Duplex Piston
Number of Pistons 2
Stroke Length 1.0 Inches (1.54 cm)
Frame Load Rating 1,140 lbs (517 kg)
Pump Weight (Average) 43 lbs (19.5 kg)
Direction of Rotation Either
Internal Gear Ratio NA
Intermittent Duty Speed Rating 500 RPM
Continuous Duty Speed Rating 400 RPM
Ball Valve Max Speed Rating NA
Minimum Speed 100 RPM
Mechanical Efficiency 90%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 1 Quart (.946 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-18.9°C Capacity)
Standard Suction Size 1.00 Inch NPT
Standard Discharge Size 0.50 Inch NPT
0.75 Inch NPT
Fluid End Material Cast Iron, Aluminum Bronze
Valve Types Disc Valves
Hydraulic Motor Mount SAE A - 2 Bolt with 7/8”-13T
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 300 RPM 350 RPM 375RPM 400RPM 500RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
I0410 1.250 / 3.175 0.0106 / 0.0401 850 / 62.05 3.19 / 12.08 3.72 / 14.08 3.98 / 15.07 4.25 / 16.09 5.31 / 20.10
I0411 1.375 / 3.493 0.0129 / 0.0488 750 / 51.71 3.86 / 14.61 4.50 / 17.03 4.82 / 18.25 5.14 / 19.46 6.43 / 24.34
I0413 1.625 / 4.128 0.0180 / 0.0681 550 / 37.92 5.39 / 20.4 6.28 / 23.77 6.73 / 25.48 7.18 / 27.18 8.98 /33.99
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
11
I04
Cast Pump Engineering Dimensional Outline
RPM
I0413 water to the liquid being pumped by dividing the published
15 I0411 NPSHr value by the specific gravity of the liquid being pumped.
I0410
• FMC published NPSHr values are based on test data
10 collected on specific pumps at the factory and are estimated
values. Actual NPSHr values for an ordered pump can only be
5
determined by a factor test. For NPSH critical applications,
contact the factory for additional information and request an
NPSHr test performed on your pump before shipment.
0
• Pump drawing dimensions in inches.
300 400 500 600
E04
Standard Cast ISO Drawing Specifications
Pump Model E04 (metric)
Configuration Verticle Quadruplex Piston
Number of Pistons 4
Stroke Length 1.0 Inches (2.54 cm)
Frame Load Rating 1,240 lbs (562.45 kg)
Pump Weight (Average) 80 lbs (36.29 kg)
Direction of Rotation Either
Internal Gear Ratio 1:1
Intermittent Duty Speed Rating 575 RPM
Continuous Duty Speed Rating 450 RPM
Ball Valve Max Speed Rating NA
Minimum Speed 390 RPM
Mechanical Efficiency 85%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 1 Quart (.964 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size 1.25 Inch NPT
Standard Discharge Size 0.75 Inch NPT
Fluid End Material Cast Iron, Aluminum Bronze
Valve Types Disc Valves
Hydraulic Motor Mount SAE A - 2 Bolt with 1”-6B
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 390 RPM 400 RPM 425RPM 450RPM 575 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
E0410 1.250 / 3.175 0.0212 / 0.0803 1,000 / 68.95 8.29 / 31.38 8.50 / 32.18 9.03 / 34.18 9.56 / 36.19 12.22 / 46.26
E0411 1.375 / 3.493 0.0257 / 0.0973 800 / 55.16 10.03 / 37.97 10.28 / 38.91 10.93 / 41.37 11.57 / 43.8 14.78 / 55.95
E0413 1.625 / 4.128 0.0359 / 0.1359 600 / 41.37 14.01 / 53.03 14.36 / 54.36 15.26 / 57.77 16.16 / 61.17 20.65 / 78.17
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
13
E04
Cast Pump Engineering Dimensional Outline
L09
Standard Cast ISO Drawing Specifications
Pump Model L09 (metric)
Configuration Horizontal Triplex Piston
Number of Pistons 3
Stroke Length 2.25 Inches (5.715 cm)
Frame Load Rating 2,800 lbs (1,270 kg)
Pump Weight (Average) 200 lbs (90.7 kg)
Direction of Rotation Top of shaft away from head
Internal Gear Ratio 3.6:1
Intermittent Duty Speed Rating 890 RPM
Continuous Duty Speed Rating 750 RPM
Ball Valve Max Speed Rating 625 RPM
Minimum Speed 360 RPM
Mechanical Efficiency 85%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 2.25 Quarts (2.13 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (-28.9°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (121°C Capacity)
Standard Suction Size 1.50 Inch NPT
Standard Discharge Size 1.00 Inch NPT
Fluid End Material Cast Iron
Valve Types Disc Valves, Ball Valves
Hydraulic Motor Mount SAE B - 4 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 350 RPM 625 RPM 700 RPM 750 RPM 890 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
L0913 1.625 / 4.128 0.0168 / 0.0636 1,200 / 82.74 5.9 / 22.33 10.5 / 39.75 11.8 / 44.67 12.6 / 47.70 15.0 / 56.78
L0914 1.750 / 4.445 0.0195 / 0.0738 1,000 / 68.95 6.8 / 25.74 12.2 / 46.18 13.7 / 51.86 14.6 / 55.27 17.4 / 65.87
L0918 2.250 / 5.715 0.0323 / 0.1223 700 / 48.26 11.3 / 42.78 20.2 / 76.47 22.6 / 85.55 24.2 / 91.61 28.7 / 108.64
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
15
L09
Cast Pump Engineering Dimensional Outline
L09 NPSHr value for Standard Disc Valves L09 NPSHr value for Standard Ball Valves
30 30
25 25
20 20
Feet of H2O
Feet of H2O
L0918D L0918B
15 15
L0914D L0914B
10 10
5 5
0 RPM 0 RPM
200 300 400 500 600 700 200 300 400 500 600 700
W11
Standard Cast ISO Drawing Specifications
Pump Model W11 (metric)
Configuration Horizontal Triplex Piston
Number of Pistons 3
Stroke Length 2.75 Inches (6.985 cm)
Frame Load Rating 6,000 lbs (2,721.6 kg)
Pump Weight (Average) 425 lbs (192.86 kg)
Direction of Rotation Top of pinion shaft away from
head
Internal Gear Ratio 3.6:1
Intermittent Duty Speed Rating 900 RPM
Continuous Duty Speed Rating 750 RPM
Ball Valve Max Speed Rating 900 RPM
Minimum Speed * 360 RPM
Mechanical Efficiency 85%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 1 Gallon (3.78 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size 2.00 Inch NPT
Standard Discharge Size 1.25 Inch NPT
Fluid End Material Cast Iron
Valve Types Disc Valves, Ball Valves
Hydraulic Motor Mount SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 360 RPM 500 RPM 635 RPM 750 RPM 900 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
W1118 2.250 / 5.715 0.0394 / 0.1491 1,000 / 68.95 14.2 / 53.75 19.7 / 74.57 25.0 / 94.64 29.5 / 111.67 35.5 / 134.38
W1122 2.750 / 6.985 0.0589 / 0.2230 1,000 / 68.95 21.2 / 80.25 29.5 / 111.67 37.4 / 141.57 44.2 / 167.32 53.0 / 200.63
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
17
W11
Cast Pump Engineering Dimensional Outline
W11 NPSHr value for Standard Disc Valves W11 NPSHr value for Standard Ball Valves
30 30
25 25
20 20
Feet of H2O
Feet of H2O
W1122D W1122B
15 15
W1118D W1118B
10 10
5 5
0 0
300 400 500 600 700 800 900 300 400 500 600 700
• Take special consideration when calculating NPSHa. Recalculate NPSHa after pump model has been selected for more accurate values.
• NPSHr values are in feet of water. If you are pumping a different liquid than water, convert the required NPSH from water to the liquid
being pumped by dividing the published NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data collected on specific pumps at the factory and are estimated values. Actual NPSHr
values for an ordered pump can only be determined by a factor test. For NPSH critical applications, contact the factory for additional
information and request an NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
L11
Standard Cast ISO Drawing Specifications
Pump Model L11 (metric)
Configuration Horizontal Triplex Piston
Number of Pistons 3
Stroke Length 2.75 Inches (6.985 cm)
Frame Load Rating 6,000 lbs (2,721.6 kg)
Pump Weight (Average) 460 lbs (208.7 kg)
Direction of Rotation Top of pinion shaft away from head
Internal Gear Ratio 3.6:1
Intermittent Duty Speed Rating 1,275 RPM
Continuous Duty Speed Rating 900 RPM
Ball Valve Max Speed Rating 1050 RPM
Minimum Speed * 360 RPM
Mechanical Efficiency 85%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 1 Gallon (3.78 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size 2.50 Inch NPT
Standard Discharge Size 1.25 Inch NPT
Fluid End Material Ductile Iron, Nickel Aluminum
Bronze
Valve Types Disc Valves, Ball Valves, Abrasion
Resistant (AR) Valves
Hydraulic Motor Mount SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 360 RPM 690 RPM 900 RPM 1,050 RPM 1275 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
L1114 1.750 / 4.445 0.0239 / 0.0905 2,500 / 172.37 8.6 / 32.55 16.5 / 62.46 21.5 / 81.39 25.1 / 95.01 30.4 / 115.08
L1118 2.250 / 5.715 0.0394 / 0.1491 1,500 / 103.42 14.2 / 53.75 27.2 / 102.96 35.5 / 134.38 41.4 / 156.72 50.3 / 190.41
L1122 2.750 / 6.985 0.0589 / 0.2223 1,000 / 68.95 21.2 /80.25 40.7 / 154.07 53.0 / 200.63 61.9 / 234.32 75.1 / 284.28
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
19
L11
Cast Pump Engineering Dimensional Outline
L11 NPSHr value For Standard Disc Valves L11 NPSHr value For Standard Ball Valves
30 30
25 25
20 20
Feet of H2O
Feet of H2O
L1122D L1122B
15 15
L1118D L1118B
10 10
5 5
0 0
600 700 800 RPM 1000
900 1100 1200 1300 200 300 RPM
400 500 600 700
L12
Standard Cast ISO Drawing Specifications
Pump Model A04 (metric)
Configuration L12 Horizontal Triplex Piston Pump
Number of Pistons 3
Stroke Length 3.0 Inches (7.62 cm)
Frame Load Rating 6,000 lbs (2,721 kg)
Pump Weight (Average) 600 lbs (272 kg)
Direction of Rotation Top of Crank Toward Fluid End
Internal Gear Ratio NA
Intermittent Duty Speed Rating 400 RPM
Continuous Duty Speed Rating 325 RPM
Ball Valve Max Speed Rating NA
Minimum Speed 100 RPM
Mechanical Efficiency 90%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 4 Quarts (3.8 Liters)
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size 3.00 or 2.5 Inch NPT
Standard Discharge Size 1.25 Inch NPT
1.50 Inch NPT
Fluid End Material Ductile Iron
Valve Types Disc Valves + AR Valves
Hydraulic Motor Mount Consult Engineering
Performance Table
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 100 RPM 200 RPM 300 RPM 325 RPM 400 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
L1222 2.750 / 7.0 0.2314 / 0.8759 1000 / 68.95 22/ 83.28 44 / 166.56 66 / 249.84 71 / 268.76 88 / 333.12
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
21
L12
Cast Pump Engineering Dimensional Outline
L16 Specifications
Standard Cast ISO Drawing
Pump Model L16 (metric)
Configuration Horizontal Triplex Piston
Number of Pistons 3
Stroke Length 4.0 Inches (10.16 cm)
Frame Load Rating 7,850 lbs (3,560.7 kg)
Pump Weight (Average) 705 lbs (319.78 kg)
Direction of Rotation Top of pinion shaft away from
head
Internal Gear Ratio 3.94:1
Intermittent Duty Speed Rating 1,475 RPM
Continuous Duty Speed Rating 1,100 RPM
Ball Valve Max Speed Rating 900 RPM
Minimum Speed * 394 RPM
Mechanical Efficiency 85%
Lubrication System (Standard) Splash, Gravity Return
Lube Oil Capacity 10 Quarts (37.8 Liters)
Lube Oil Type SAE 80W90
Maximum Fluid Temperature 140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature 0 °F (-20 °F Capability)
-17.8°C (-28.91°C Capacity)
Standard Suction Size STD - 2.50 Inch NPT
HV - 3.00 Inch NPT
Standard Discharge Size STD - 1.25 Inch NPT
HV - 2.00 Inch NPT
Fluid End Material Ductile Iron, Nickel Aluminum
Bronze
Valve Types Disc Valves, Ball Valves, Abrasion
Resistant (AR) Valves
Hydraulic Motor Mount SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
Performance Table * Slower RPM can be achieved with the addition of a pressurized lubrication system
Pump Model Piston Displacement Maximum Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
Diameter (GAL/REV) Pressure 394 RPM 750 RPM 900 RPM 1100 RPM 1475 RPM
(in) / (cm) (LITERS/REV) (PSI) / (BAR)
L1614 1.750 / 4.445 0.0317 / 0.1200 2,500 / 172.37 12.5 / 47.32 23.8 / 90.09 28.5 / 107.88 34.9 / 132.11 46.8 / 177.16
L1616 2.000 / 5.08 0.0414 / 0.1567 2,500 / 172.37 16.3 / 61.70 31.1 / 117.73 37.3 / 141.20 45.6 / 172.61 61.1 / 231.29
L1618 2.250 / 5.715 0.0524 / 0.1984 2,000 / 137.90 10.7 / 40.50 39.3 / 148.77 47.2 / 178.67 57.7 / 218.42 77.3 / 292.61
L1622 2.750 / 6.985 0.0783 / 0.2964 1,300 / 89.63 30.9 / 116.97 58.7 / 222.20 70.5 / 266.87 86.1 / 325.92 115.5 / 437.22
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
L16
Cast Pump Engineering Dimensional Outline
Standard Fluid End Shown
www.fmctechnologies.com