Professional Documents
Culture Documents
Gear Selector Control, Adjustment Volvo Transmission
Gear Selector Control, Adjustment Volvo Transmission
Greensboro, NC USA
TSI
Date Group No. Supp. Page
W4000352
V776-432-005SB USA10723
Page 2
1
Before performing these procedures
check the following for wear an loose-
ness:
2
Remove the bolts from the top of the
control housing for those gear posi-
W4002528 tions which are to be adjusted. Refer
Fig. 1: Gear position location (R1000) to figure 1 or 2 depending on style of
transmission.
1 1st Gear
2 2nd Gear
3 3rd Gear 3
4 4th Gear Apply sealant (V1161240) to the ad-
justing screw threads, install and
screw them down 3–4 turns.
4
Engage the gear which is to be ad-
justed.
5
Screw down the adjusting screw by
hand until it makes contact with the
gear selector.
6
Turn the adjusting screw in 1/6 of a
W4002529
turn (60 ) and lock with the locknut.
Fig. 2: Gear position location (SR1700) Torque to 24 Nm (18 ft.lb).