Professional Documents
Culture Documents
ST5102-Dynamics of Structures
ST5102-Dynamics of Structures
QUESTION BANK
I SEMESTER
Regulation – 2017
Prepared by
T.SWEDHA
Assistant Professor
SEM/YEAR: 01/I
UNIT I
PRINCIPLES OF VIBRATION ANALYSIS
Mathematical models of single degree of freedom systems - Free and forced vibration of SDOF
systems, Response of SDOF to special forms of excitation, Effect of damping, Transmissibility,
applications-examples related to structural engineering.
PART-A (2 MARKS)
BT-6 Create
BT-4 Analyze
BT-4 Analyze
BT-2 Understand
BT-4
UNIT-2
TWO DEGREE OF FREEDOM SYSTEMS
Mathematical models of two degree of freedom systems, free and forced vibrations of two
degree of freedom systems, normal modes of vibration, applications.
PART-A (2 MARKS)
BT-6 Create
3. Analyze the natural frequency and mode shape of the system BT-4 Analyze
shown in fig.
5. Estimate the expression for free damped vibration of 2 DOF. BT-2 Understand
6. Explain the concept of shear building and derive the
expression for steady state response of a forced undamped BT-2 Understand
2DOF system.
7. Calculate the natural frequencies and mode shape and steady
state response of the given system.
BT-3 Application
BT-1 Remember
13. A three storey building has seismic weights of 180 kN, 200
kN and 120 kN at I, II and III storeys respectively; The
corresponding stiffness are 20000 kN/m, 25000 kN/m and BT-1 Remember
30000 kN/m.
(i) Determine the model frequencies.
(ii) Sketch the mode shapes.
14. Set up the differential equation of motion and determine the
natural frequencies and mode shapes for the given system.
BT-1 Remember
BT-4 Analyze
BT-3 Application
5. Write the spectral and Modal matrix for the given shear frame.
BT-3 Application
6. Analyze the Natural frequencies and mode shape for the given
system and Check the orthogonality conditions.
BT-4 Analyze
BT-2 Understand
BT-2 Understand
BT-2 Understand
BT-1 Remember
BT-5 Evaluate
3. Find out the solution for equation of motion and find out the
natural frequency and mode shapes with one end fixed and other BT-2 Understand
end simply supported.
4. Calculate the natural frequency and mode shape for a beam with Application
BT-3
both the ends free.
5. Calculate a solution to find the natural frequency and mode
BT-3 Application
shape for a simply supported beam
6. Derive the equation of motion by Rayleigh – Ritz Method. BT-4 Analyze
7. Derive an expression for the transverse vibration of a uniform
beam. Hence find the natural frequency and mode shapes of a BT-1 Remember
fixed beam.
8. Express in detail the equation of motion by Virtual work
BT-4 Analyze
method.
9. Find out the natural frequencies and mode shape for a beam with
BT-1 Remember
one end fixed and other end free.
10. Formulate the equation of motion by conservation of energy
BT-2 Understand
method.
11. (i) Explain about the free and forced vibration of
continuous systems. BT-2 Understand
(ii) List out the applications of virtual work method?
12. Determine the fundamental frequency of the cantilever beam by
BT-1 Remember
Raleigh’s method.
13. Determine the first two frequencies of a Cantilever beam by
BT-1 Remember
Rayleigh-Ritz method by assuming
BT-3 Application