Professional Documents
Culture Documents
Sika Separol 10 Pds en
Sika Separol 10 Pds en
Sika® Separol®-10
CHEMICAL FORM RELEASE AGENT
PRODUCT INFORMATION
Packaging 200 L drum
Bulk container
Appearance / Colour Liquid / Reddish
Shelf Life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage Conditions Store in dry conditions at temperatures +30 °C maximum. Protect from dir-
ect sunlight and frost.
Density 0.84 ± 0.02 kg/L (at +20 °C)
APPLICATION INFORMATION
Consumption On timber / plywood formwork 1 L for ~20 - 25 m2
On metal or plastic formwork 1 L for ~40 m2
1/2
LIMITATIONS LEGAL NOTES
▪ Protect fresh coat from rain. The information, and, in particular, the recommenda-
▪ Cleaning the mould surface between each use and tions relating to the application and end-use of Sika
before application is essential to prevent the forma- products, are given in good faith based on Sika's cur-
tion of hardened concrete "build up". rent knowledge and experience of the products when
▪ Sika® Separol®-10 contains flammable materials and properly stored, handled and applied under normal
falls under the dangerous goods regulations (class 3). conditions in accordance with Sika's recommenda-
▪ During application in confined areas, ditches, shafts tions. In practice, the differences in materials, sub-
etc. adequate ventilation must be provided. During strates and actual site conditions are such that no war-
its application open fire and other igniting agents ranty in respect of merchantability or of fitness for a
(e.g. welding works) must be removed particular purpose, nor any liability arising out of any
▪ In a liquid not fully cured state the thinner and the legal relationship whatsoever, can be inferred either
product contaminate water and should not get into from this information, or from any written recom-
drains, water and ground. mendations, or from any other advice offered. The
user of the product must test the product’s suitability
BASIS OF PRODUCT DATA for the intended application and purpose. Sika re-
serves the right to change the properties of its
All technical data stated in this Data Sheet are based products. The proprietary rights of third parties must
on laboratory tests. Actual measured data may vary be observed. All orders are accepted subject to our
due to circumstances beyond our control. current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
LOCAL RESTRICTIONS Sheet for the product concerned, copies of which will
be supplied on request.
Please note that as a result of specific local regula-
tions the declared data and recommended uses for
this product may vary from country to country. Please
consult the local Product Data Sheet for the exact
product data and uses.
SikaSeparol-10_en_ID_(09-2016)_1_1.pdf
2/2