Professional Documents
Culture Documents
HoseReels s500
HoseReels s500
HoseReels s500
INDEX
HOSE REELS
NO
DISORDER BREAK
for an orderly workplace
TECHNICAL
data ACCIDENT
Drum support
bushings in brass
alloy, self-lubricating,
effective and
corrosion resistant
Adjustable arm:
to favor hose extraction Fully enclosed
according to hose reel and protected
installation constant-force automatic
rewinding spring
Self-lubricating
hose guide rollers: Fluid passage swivel joint
wide multi-way in brass / carbon steel /
opening s/steel / AISI 304 s/steel
with polyurethane /viton /
PTFE (Teflon) seals
S. 290 S. 260
S. 330
S. 450
S. 390
S. 430
S. 617-637
S. 530
S. 540
S. 618-638
S. 560
E
GASOLIN
USES
USES
OVERALL DIMENSIONS
OVERALL DIMENSIONS
inches
inches
P/N 89001-55
bayonet bracket,
for hose reel P/N 89010-55 No.1 packing 0.9 ft3 14 lb No.1 packing 3.9 ft3 64 lb
Series 450 industrial 99
EXAMPLE OF INSTALLATION
8450.104-55 ø 1/2”- 50’ (996.215-55) 1/2”NPTF (m) 1/2”NPTF (m)
8450.400-55 without hose 1/2”NPSM (f) 1/2”NPSM (f)
Oil 8450.401-55 ø 1/2”- 35’ (996.310-55) 1/2”NPTF (m) 1/2”NPTF (m)
2000 psi 8450.402-55 ø 1/2”- 50’ (996.315-55) 1/2”NPTF (m) 1/2”NPTF (m)
8450.500-55 without hose 3/8”NPSM (f) 3/8”NPSM (f)
8450.501-55 ø 1/4”- 40’ (993.511-55) 3/8”NPTF (m) 1/4”NPTF (m)
Grease 8450.502-55 ø 1/4”- 60’ (993.518-55) 3/8”NPTF (m) 1/4”NPTF (m) Bench installation Ceiling installation
6500 psi 8450.505-55 ø 3/8”- 35’ (995.710-55) 3/8”NPTF (m) 1/4”NPTF (m)
8450.506-55 ø 3/8”- 50’ (995.715-55) 3/8”NPTF (m) 1/4”NPTF (m)
0.59”
8.58” 8.58”
For installing 0.59”
several hose
OVERALL DIMENSIONS
8.58” 8.58”
1 reels in series,
INSTALLATION
follow the
distance
inches
between
bracket and
The template supplied The adjustable bracket as per drawing in
facilitates drilling of the arms can be easily order to keep them aligned
holes and therefore repositioned with eventual drip-catchers
hose reel fixing according to needs assembled underneath No.1 packing 3.9 ft3 from 64 lb
100 industrial Series 290
Hose reel with hoses
in black synthetic
rubber and galvanized
steel fittings.
The hose reels are
equipped with a
universal hose stop;
those with hose are
provided with a 2’ inlet
connection hose.
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 1.3 ft3 from 15 to 26 lb
Series 330 industrial 101
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 15.9 ft3 from 18 to 29 lb
102 industrial Series 390
Hose reel with hoses
in black synthetic
rubber and galvanized
steel fittings.
The hose reels are
equipped with a
universal hose stop;
those with hose are
provided with a 2’ inlet
connection hose.
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 2.4 ft3 from 24 to 40 lb
Series 430 industrial 103
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 3.0 ft3 from 31 to 53 lb
104 industrial Series 430 ABS
Hose reel with hoses
in black synthetic Painted steel Stainless steel
rubber and galvanized
steel fittings.
The hose reels are
equipped with a
universal hose stop;
those with hose are
provided with a 2’ inlet
connection hose.
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 3.0 ft3 from 31 to 53 lb
Series 530 industrial 105
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 4.2 ft3 from 42 to 93 lb
106 industrial Series 540
Hose reel with hoses
in black synthetic
rubber and galvanized
steel fittings. The hose
reels are equipped
with a universal hose
stop; those with hose
are provided with a 2’
inlet connection hose.
Protective guard on
rack side is supplied
with the hose reel.
eventual drip-catchers
1 2 assembled underneath
OVERALL DIMENSIONS
3 4
The quick coupling
inches
adjustable support
that enables
40° rotation to The adjustable
the right or left of arms can be easily
the hose reel is repositioned
available on request according to needs No.1 packing 6.2 ft3 from 53 to 110 lb
Series 560 industrial 107
1 reels in series,
INSTALLATION
follow the
distance
inches
between
bracket and
The template supplied bracket as per drawing in The adjustable
facilitates drilling of the order to keep them aligned arms can be easily
holes and therefore with eventual drip-catchers repositioned
hose reel fixing assembled underneath according to needs No.1 packing 10.9 ft3 from 66 to 176 lb
108 industrial Stainless steel AISI 304
This series includes a
specific range of open
hose reels in stainless
steel AISI 304 for
air/water/hot water
266 °F 1400-3000-
5800 psi.
Manufactured entirely
in stainless steel AISI
304 they are suitable
for cleaning and
washing applications
in places with high
hygienic demands such
as food industries,
restaurants and
sanitary places, etc.
STAINLESS STEEL
Series 8434.200-55
without hose
1/2”NPSM (f) 1/2”NPSM (f) 8434.300-55
without hose
3/8”NPSM (f) 3/8”NPSM (f) 8434.350-55
without hose
3/8”NPSM (f) 3/8”NPSM (f)
430 (see page 122) (see page 122) (see page 122)
Series 8534.200-55
without hose
1/2”NPSM (f) 1/2”NPSM (f) 8534.300-55
without hose
3/8”NPSM (f) 3/8”NPSM (f) 8534.350-55
without hose
3/8”NPSM (f) 3/8”NPSM (f)
530 (see page 122) (see page 122) (see page 122)
Series 8544.200-55
without hose
1”NPSM (f) 1”NPSM (f) 8544.300-55
without hose
3/8”NPSM (f) 3/8”NPSM (f) 8544.350-55
without hose
3/8”NPSM (f) 3/8”NPSM (f)
540 (see page 122) (see page 122) (see page 122)
Series 8564.200-55
without hose
1”NPSM (f) 1”NPSM (f) 8564.300-55
without hose
3/8”NPSM (f) 3/8”NPSM (f) 8564.350-55
without hose
3/8”NPSM (f) 3/8”NPSM (f)
560 (see page 122) (see page 122) (see page 122)
OVERALL DIMENSIONS inches
1
INSTALLATION
430 No.1 packing 3.0 ft3 31 lb 540 No.1 packing 6.2 ft3 53 lb
SERIES
530 No.1 packing 4.2 ft3 42 lb 560 No.1 packing 10.9 ft3 66 lb
Series 436-537 DEF industrial 109
1
DIMENSIONS inches
INSTALLATION
SERIES 436 No.1 packing 4.3 ft3 from 42 to 93 lb 537 No.1 packing 4.2 ft3 from 42 lb
110 manual Series 500
Manual rewinding
hose reels are an easy
and practical way to
manage flexible hoses.
Operation is extremely
simple and needs very
little maintenance.
Made with high quality
materials with a robust
frame, manual
rewinding hose reels
are an inexpensive
alternative to
spring rewinding hose
reels particularly for
very long hoses.
PAINTED STEEL
Water ≤ 266 °F 3000 psi 7522001.300-55 7532001.300-55 7552001.300-55 7562001.300-55 3/8” NPSM (f) 1/2” NPSM (f)
Diesel oil 140 psi 7522001.100-55 7532001.100-55 7552001.100-55 7562001.100-55 1” NPSM (f) 1” NPSM (f)
Series A B C D E F G H I
240 11.7” 15” 12.3” 24.9” 9.5” 13.5” 20” 21.9” 18.5”
320 15” 15” 12.3” 28” 13” 17” 20” 21.9” 18.5”
460 20” 15” 12.3” 34” 18” 22” 20” 21.9” 18.5”
600 26” 15” 12.3” 39” 23.5” 28” 20” 21.9” 18.5”
9.5” No.1 packing 7.3 ft3 56 lb 18” No.1 packing 10.7 ft3 65 lb
SERIES
13” No.1 packing 8.6 ft3 59 lb 23.5” No.1 packing 12.9 ft3 70 lb
Technical features
Clutch control
Reel locking
1
112 industrial Welding Series 430 - 530 - 540
Hose reel suitable for
twin hose for welding
with brass fittings.
The hose reels are
equipped with a
universal hose stop.
Connections are left
and right hand thread.
In the twin hose the green one is provided with right hand thread. The red one is provided with left hand thread in order to avoid wrong connection.
Note: all the hosereels
are without hose PAINTED
Delivery Inlet Outlet
SERIES 430 P/N
hose connection connection
Welding 250 psi 8430.700-55 without hose (see page 122) 3/8”NPTF (m) 3/8”NPTF (m)
Welding 250 psi 8530.700-55 without hose (see page 122) 3/8”NPTF (m) 3/8”NPTF (m)
Welding 250 psi 8540.700-55 without hose (see page 122) 3/8”NPTF (m) 3/8”NPTF (m)
1
DIMENSIONS inches
INSTALLATION
Grounding reel
satisfies the need to
ground fuel tanks
during transferring
operation in order to
discharge electric
charges.
PAINTED STEEL
Cable cross
APPLICATIONS: P/N Cable material Insulation section Cable length Grounding clamp
tanks and oil-refinery, aviation,
tank truck, boating. 735000-55 without cable max cable capacity 98’ - cross section 0.025 inches2
735131.60141-55 copper PUR 0.009 inches2 48’ antiexplosive 10A
735131.60261-55 copper PUR 0.009 inches2 85’ antiexplosive 10A
735131.60152-55 copper PUR 0.009 inches2 49’ standard 50A
735131.60252-55 copper PUR 0.009 inches2 82’ standard 50A
735141.60152-55 steel PVC 0.28x0.28” ø 0.20” 49’ standard 50A
735141.60252-55 steel PVC 0.28x0.28” ø 0.20” 82’ standard 50A
Operation:
Before begin fuel transfer operator must connect the grounding clamp, mounted at the end of the cable, to the grounding
plate which is compulsory on every tank truck (Pic. A). As an alternative the grounding reel may be installed on the
tank truck and the clamp connected to the grounding plate (Pic. B). Antiexplosive clamp, standard on some models
below listed, may be installed in a potential explosive area (Zone 1) as specified in the CE declaration.
Pic. A Pic. B
OVERALL DIMENSIONS
clamp 100A
inches
14.2”
7”
4.8” 8”
5”
Air - Water 300 psi 8617.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8637.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Water ≤ 266 °F 1400 psi 8617.200-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8637.200-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Oil and similar 2000 psi 8617.400-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8637.400-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Grease 5800 psi 8617.500-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8637.500-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Diesel oil 140 psi 8617.600-55 without hose (see page 122) 1 1/2”NPSM (f) 1 1/2”NPTF (f) 8637.600-55 without hose (see page 122) 1 1/2”NPSM (f) 1 1/2”NPTF (f)
SERIES 617 No.1 packing 12.4 ft3 from 121 to 125 lb 637 No.1 packing 0.473 ft3 from 165 to 170 lb
Series 618 - 638 pneumatic 115
Air - Water 300 psi 8618.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8638.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Water ≤ 266 °F 1400 psi 8618.200-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8638.200-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Oil and similar 2000 psi 8618.400-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8638.400-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Grease 5800 psi 8618.500-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8638.500-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
Diesel oil 140 psi 8618.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f) 8638.100-55 without hose (see page 122) 1”NPSM (f) 1”NPSM (f)
SERIES 618 No.1 packing 12.4 ft3 from 112 to 115 lb 638 No.1 packing 16.7 ft3 from 156 to 160 lb
116 motor-operated hose reels
WALL MOUNTING OF HYDRAULIC AND AIR MOTOR-OPERATED HOSE REELS
F G
Bench installation.
Ceiling installation.
118 swivel bracket ACCESSORIES
P/N 843005-55
Adjustable support in steel for fixed hose reels in painted steel
series 290 - 330 - 390 - 430
P/N 843006-55
Adjustable support in AISI 304 stainless steel for fixed hose reels in
stainless steel series 290 - 330 - 390 - 430
P/N 845005-55
Adjustable support in steel for fixed enclosed hose reels in painted
steel series 450
P/N 853005-55
Adjustable support in steel for fixed hose reels in painted steel
series 530
P/N 853006-55
Adjustable support in AISI 304 stainless steel for fixed hose reels in
stainless steel series 530
P/N 854005-55
Adjustable support in steel for fixed hose reels in painted steel
series 540
P/N 854006-55
Adjustable support in AISI 304 stainless steel for fixed hose reels
in stainless steel series 540
-40° -40°
+40° +40°
0° 0°
Special bracket
to mount 1 hose reel
series 390 or 430
12”
4”
4”
on beam
6”÷3”
2”
12”
3”
22” 3” 3” 4” 3”
P/N 843012-55
Special bracket
to mount 2 hose reel
12”
4”
4”
series 390 or 430
on beam
6”÷3”
2”
12”
3”
33” 3” 3” 4” 3”
P/N 843013-55
Special bracket
to mount 3 hose reel
12”
4”
on beam
6”÷3”
2”
12”
Mounting Channel
This special bracket
allows ceiling installation
on beam for 1, 2 or 3
hosereels series 390
and 430.
Mounting channel
can be mounted in 2
different position as
shown on pictures 1
and 2 Pic. 1
Pic. 2
120 ACCESSORIES
P/N 88630-55
Modular drip-tray. Equipped with hook for control handle and
removable drip-tray. Applied under the hose reel, it is a handy
holder for the delivery handle. Essential for a clean and orderly
workplace.
Comes with all hose reels supplied without hose, complete with adapters for using hoses of different diameter.
ø 0.55” max 45’ Series 290 ø 0.79” max 85’ Series 530
ø 0.63” max 35’ ø 0.87” max 75’
ø 0.59” x 0.59” max 40’ Series 430 ø 0.59” x 0.59” max 115’ Series 540
ø 0.63” x 0.63” max 35’ ø 0.63” x 0.63” max 90’
The hoses to be assembled on the hose reels must be suitable for the working
pressures specified on the label.
Hose Hose
P/N Hose ø Inlet Outlet
Length characteristics
971.111-55 36’ polyurethane 5/16” 1/4” BSP (m) 1/4” NPTF (m)
993.215-55 50’ black rubber 1/4” 3/8” NPTF (m) 1/4” NPTF (m)
993.218-55 60’ black rubber 1/4” 3/8” NPTF (m) 1/4” NPTF (m)
995.210-55 35’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPTF (m)
995.211-55 40’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPTF (m)
995.217-55 60’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPTF (m)
Air - Water 996.210-55 35’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
300 psi 996.215-55 50’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
996.220-55 20’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
Fittings 996.225-55 80’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
NPTF Zinc plated 997.215-55 50’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.220-55 65’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.230-55 100’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.240-55 130’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
998.215-55 50’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.220-55 65’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.230-55 100’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
995.313-55 40’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPTF (m)
995.318-55 56’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPTF (m)
996.307-55 25’ black rubber 1/2” 3/8” NPTF (m) 1/2” NPTF (m)
996.311-55 35’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
996.316-55 50’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
Water ≤ 266 °F
996.321-55 65’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
1400 psi 996.326-55 80’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
997.315-55 50’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
Fittings 997.320-55 65’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
NPTF Zinc plated 997.330-55 100’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.340-55 130’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
998.315-55 50’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.320-55 65’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.330-55 100’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
994.512-55 40’ black rubber 5/16” 3/8” NPTF (m) 3/8” NPSM (f)
994.517-55 56’ black rubber 5/16” 3/8” NPTF (m) 3/8” NPSM (f)
Water ≤ 266 °F 995.512-55 40’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
3000 psi 995.518-55 60’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
995.520-55 65’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
Fittings 995.525-55 80’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
NPTF Zinc plated 995.530-55 100’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
995.540-55 130’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
995.550-55 165’ black rubber 3/8” 3/8” NPTF (m) 3/8” NPSM (f)
Hoses TECHNICAL DATA 125
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
995.312-55 40’ black rubber 3/8” 3/8” NPTF (m) 1/2” NPTF (m)
995.317-55 56’ black rubber 3/8” 3/8” NPTF (m) 1/2” NPTF (m)
996.308-55 25’ black rubber 1/2” 3/8” NPTF (m) 1/2” NPTF (m)
996.310-55 35’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
996.315-55 50’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
Oil and similar 996.320-55 65’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
2000 psi 996.325-55 80’ black rubber 1/2” 1/2” NPTF (m) 1/2” NPTF (m)
997.515-55 50’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
Fittings 997.520-55 65’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
NPTF Zinc plated 997.530-55 100’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.540-55 130’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
998.515-55 50’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.520-55 65’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.530-55 100’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
993.511-55 40’ black rubber 1/4” 3/8” NPTF (m) 1/4” NPTF (m)
Grease 993.516-55 52’ black rubber 1/4” 3/8” NPTF (m) 1/4” NPTF (m)
6500 psi 993.518-55 60’ black rubber 1/4” 3/8” NPTF (m) 1/4” NPTF (m)
995.710-55 35’ black rubber 3/8” 3/8” NPTF (m) 1/4” NPTF (m)
Fittings 995.715-55 50’ black rubber 3/8” 3/8” NPTF (m) 1/4” NPTF (m)
NPTF Zinc plated 995.720-55 65’ black rubber 3/8” 3/8” NPTF (m) 1/4” NPTF (m)
995.725-55 80’ black rubber 3/8” 3/8” NPTF (m) 1/4” NPTF (m)
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
997.812-55 40’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.815-55 50’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.820-55 65’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
Diesel oil 997.830-55 100’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
140 psi 997.835-55 115’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
997.840-55 130’ black rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
Fittings 998.808-55 25’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
NPTF Zinc plated 998.815-55 50’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.820-55 65’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
998.830-55 100’ black rubber 1” 1” NPTF (m) 1” NPTF (m)
Hose
P/N Hose characteristics Hose ø Inlet Outlet
Length
Def 140 psi 967.210-55 35’ EPDM rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)
Fittings NPTF Zinc plated 967.215-55 50’ EPDM rubber 3/4” 3/4” NPTF (m) 3/4” NPTF (m)