Professional Documents
Culture Documents
Pdfs National Stockyard Systems Full Brochure
Pdfs National Stockyard Systems Full Brochure
Pdfs National Stockyard Systems Full Brochure
STOCKYARD
SYSTEMS
Australia’s Best Stock Yards,
designed by stockmen for stockhandlers
Fourth Edition
MISSION STATEMENT
“To develop, manufacture and market a range of stock handling equipment that optimises value for clients
through increased stock flow and minimal stress for operator and stock.
Natural stock behaviour will dictate product design and client value will be maximised via cost / safe stock
throughput parameter ratios.
National Stockyard Systems does not seek to provide a solution for every requirement, but does seek to
provide a product that offers superior value and performance in chosen fields”.
MURRAY SCHAEFER
Managing Director - National Stockyard Systems
Tel: 02 4932 1363 Mobile: 0425 315 913
“The aim of this brochure is to assist clients to make an informed decision to make
your stock work easier with less stress on your stock and improve your overall
bottom line”.
“I don’t see my role as a salesman, as the yards and crushes sell themselves. I get a
great kick of sharing my 45 years of stock handling experience and helping clients to
choose best what will suit their operation”.
2
GERALD HICKS, Bucca Road, Nana Glen
Crush Manufacturer - Tel: 02 6654 3088
The NSS crushes are manufactured by Gerald Hicks who is directly responsible for
many of the innovations that have improved stock handling equipment world wide
over the past 25 years.
Gerald grew up on the typical family farm in Western Australia and relocated to
Guyra on the early 1980’s.
He was one of the foundation partners of Ruddweigh Australia in 1980 and
designed the Ruddweigh scales and crushes.
In 1990 Gerald founded Carinya Products, designing and manufacturing the full
range of Carinya crushes. Metalcorp Steel purchased Carinya Products in 1994
and retained Gerald as manager until he “retired” in 2003.
Gerald had owned and operated his own property since leaving the family farm.
He has an inherent understanding of stock management.
Gerald has been designing and building the innovative range of National
Stockyard Systems crushes since 2005.
MICHAEL SCHAEFER
Manufacturing Manager/Sales - Tel 02 4932 1363 Mob 0432 678 748
“I hope to go back to the land one day. Dad was a 5th generation farmer and
I would like to continue the family heritage. In the meantime I enjoy making a
valuable contribution to the business. Erecting yards, talking with and learning from
customers are the most satisfying parts of the job, I also enjoy spending time at my
uncle’s property at Walcha”.
DANIEL LOCKREY
Manufacturing/Sales Tel 02 4932 1363 Mob 0427 030 190
Daniel grew up on the family farm at Manilla. Daniel’s father Stuart is regarded as
one of Manilla’s best operators.
“If I was just making the standard old panels and gates that are available
everywhere then I would not enjoy it. It is a really great manufacturing team that I
work with, and innovation, practicality and quality of workmanship is encouraged
in the factory. I really look forward to assisting with sales as well”
3
IMPORTANT INFORMATION
WE WELCOME FEEDBACK ON ANY OF THE FOLLOWING FACTS
AND ENCOURAGE YOU TO CONTACT US IF YOU REQUIRE FURTHER CLARIFICATION.
• Our patented bolt together system will handle uneven working capacities (based on 2 tooth steers).(A cow
or sloping ground. and calf unit will require double that area). We do not
A 3.2 metre panel can rise or fall over 4 inches via our quote tight holding capacities which leave no room for
slotted holes. A rise or fall of over 8 inches is easy with processing cattle.
our extender cleats. Also, impact is still spread over
adjacent panels if a beast hits hard. • The automatic stopper/s on our gates (2 per gate
on medium and heavy yards) prevent gate twist and
• The steel we use is Grade 450 (very high tensile and eliminates the gate being pushed through when
gal inside and out) drafting. (Our gate folds back 180 degrees one way
A 1.6mm wall has the same strength as 2.1mm wall in and the automatic stopper can be manually over ridden
normal steel, and a 2.0mm wall has the same strength to allow 100 degrees swing the other way). The slam
as 2.6mm wall in normal steel. Oval rail minimises catch pin rotates back behind the gate post so as to
bruising. be non bruise when drafting. Also pulling a slam catch
gate behind you to close it, when walking through yards,
• The bolt together system will eliminate rattle noise, is infinitely quicker than stopping and turning to latch a
is stronger than pins, acts a theft deterrent and does conventional chain or drop bolt closing gate.
not take much longer to erect than a pin together
system. • A drop or slide bolt latching system is a real rib
A conventional joining system which uses pins and cleats catcher and can severely injure an animal if it gets
can result in panels becoming separated if the joining pin jammed between the gate and the gate post.
length is not at least twice as long as the gap between
the double cleats. Also there is between 320 & 500mm • A 360 degree swinging gate with a double gudgeon
of weld around the cleats on each of our panel posts can result in a big gap between the gate post and the
compared to around 160mm on a lug and pin post. (It latch post. A calf or weaner can get their head in this
is possible for the weld on a lug and pin system to tear gap, suck back and it is difficult to free the animal.
out of the wall of the post). It will take more pressure
to shear our bolt than it will to bend a pin. (We have • The slide gates and calf panels have extra rails to
never had a bolt break yet). prevent heads getting through the rails. Also we
provide an extra rail option in our working race.
• Alternative joining systems utilizing cleats and pins
where the top cleat is below the top of the panel has • The manways are wide enough to allow a beast
resulted in many broken legged horses and cattle. through easily. (Our manways are wider than our race).
This is a vital consideration for round yards and other Many animals has been caught between the ribs and hips
yards around horses, or cattle yards where cattle attempt attempting to go through an open mangate that is too
to climb or jump or where horses are tied alongside cattle narrow, and, it is a big effort to release them.
yards.
• Manways are included in most plans, ground pins are
• The centre cleat on our joining system transfers included in all yards and concretable spiggots with
impact from the gate slam catch post to the 1, or sleeves are included with all ramps. These are all often
often, 2 adjacent panel posts. This prevents the slam optional extras with other suppliers.
catch popping from the keeper under impact or pressure.
• Our gates and joining system won the Encouragement
• If a gate does not swing back to lay flat against the Award at the 2005 Ag-Quip Inventor’s Competition.
adjacent panel, then it is very easy for the gate hinges The Hicks Drafter was the overall winner in the same
to be broken, or the gate hinge to be torn off the post competition in 2007 and won an Award of Excellence
(due to the massive fulcrum effect). That is why some at the Australian National Field Days in 2009. In
other yard manufacturers swing their gates on the outside addition we have patents or patent applications on our
perimeter of yards. (This results in the operator having concrete floors, on our gates and joining system, calf
to do a figure of 8 around the yard when transferring cradle, split sliding gate and drafting boxes. Also we have
cattle into the next yard). Our gates generally swing from Registered Designs on our joining system, overhead draft
the inside (the open gate lays flat against the adjacent box, crush operating handle and chin clam. That is why
panel), thereby minimising operator walking and greatly these practical and innovative products are unique to
enhancing cattle flow. National Stockyard Systems.
• The shape and placement of our slam catch keepers • Our patented concrete floor loading ramps have been
makes them non bruise. Also, there is a 90mm long slot stressed tested. Each of the 700mm long pads will take
to cater for rise and fall of the gate. This prevents having 3.7 tonnes before they crack.
to manually lift a sagging gate to engage the catch as per
other slam keepers.
• We are often asked by resellers to sell through them
• Our pricing is GST inclusive (as per the law). but, we only sell direct. Thus, by purchasing direct,
the end user is receiving practical advice and a superior
• The longer panels we use (only in non pressure product at a lower cost than going through a reseller.
areas) result in the erected yards being bigger than Some resellers push clients into products they make the
they appear on paper. Also we attempt to provide safe most margin on, rather than the most suitable product.
4
CRUSHES AND HEADBAILS
Tweed Basic
9 Good access to the neck for vaccinating and
5
2 coaxing forward of reluctant animals.
Tweed Basic pictured with swivel posts (optional extra). 16 Yellow soft handle grips for safety and quickly
locating control levers.
1 Diamond shape yoke prevents excessive vertical head (thus whole body
movement), minimising the need for engaging the chin bar. All chin bars 17 Bruise minimisation grade 450 high tensile
put pressure under the throat which hinder some tasks such as bloat oval rail.
bombing. The Diamond shape yoke is a much more functional design.
18 Bolt down lugs fitted to base.
2 Heavy Duty Slide Lock Headbail with infinite incremental catching
positions. Quiet no-noise operation.
19 Extra length in crush (2.4M internal) to fit
longer animals completely in crush prior to
3 Drop - Away catching and release handle for safety. Auto engage to catching.
facilitate catching. Australian Registered Design No. 14407/2008
20 Off side operation available but will incur a
4 Vertical open baffles. Vision of cattle is not restricted hence cattle will walk lead time and a price premium of 5%.
up closer to it. Makes catching easier.
21 The Folding Chin Clam bolts onto the head
5 Bail arms will automatically open if the bail arms are opened to within 4 lifter, and, as the head lifter is engaged, the
inches of the side of the crush. This prevents hip caps being knocked if an chin clam folds into a U shape as the Head
inexperienced operator does not fully open the headbail when releasing Lifter is raised. Also, the head lifter, and, thus
the animal. the chin clam are now height adjustable
6 Chin bar (standard on all crushes and head bails) facilitates tasks such
as ear tagging and pink eye treatment where restricted head movement is
required. Chin bar height can be manually adjusted. Release is a simple
one-handed operation, even under pressure.
5
2
12
20
9 22
19
16
15
4
8 3
1 14
21
3
15
7
6 10
18
23 20
13
11
17
1 Diamond shape yoke prevents excessive vertical head 6 Chin bar (standard on all crushes and head bails)
(thus whole body movement), minimising the need facilitates tasks such as ear tagging and pink eye
for engaging the chin bar. All chin bars put pressure treatment where restricted head movement is required.
under the throat which hinder some tasks such as bloat Chin bar height can be manually adjusted. Release is
bombing. The Diamond shape yoke is a much more a simple one-handed operation, even under pressure.
functional design.
7 Stabilizer bars transfer attempted outward movement at
2 Heavy Duty Slide Lock Headbail with infinite incremental the base of the headbail back to the frame of the cattle
catching positions. Quiet no-noise operation. crush. Thus, the bail arms remain absolutely parallel,
even under extreme pressure.
3 Drop - Away catching and release handle for safety.
Auto engage to facilitate catching. Australian Registered 8 Slam catchers on all swinging gates.
Design No. 14407/2008
9 Needle gate (with auto catch) for access to neck
4 Vertical open baffles. Vision of cattle is not restricted vaccinations. The gate is also wide enough to allow
hence cattle will walk up closer to it. Makes catching backlining.
easier.
10 Galvanised steel construction and then painted with
5 Bail arms will automatically open if the bail arms are Anti Corrosive Alkyd Based Zinc Phosphate Enamel
opened to within 4 inches of the side of the crush. This which custom made for National Stockyard Systems by
prevents hip caps being knocked if an inexperienced a leading industrial paint supplier. A Dry Film Thickness
operator does not fully open the headbail when of 50 microns is sought.
releasing the animal.
6
11 Designed to minimise dirt build up (thus rust).
Easy to clean.
23 A maximum of 55mm gap prevents a beast getting a All crushes have a squeeze option. The double squeeze
leg out and breaking it. (pictured) will squeeze enough to immobilise a small calf
7
Crushes and Headbails
Hunter Standard
5
2
14
21
14
4 9 15
13
18 12 3
8
1
20
3
17
6 16
7 22
11
10 19
1 Diamond shape yoke prevents excessive vertical head 6 Chin bar (standard on all crushes and head bails)
(thus whole body movement), minimising the need facilitates tasks such as ear tagging and pink eye
for engaging the chin bar. All chin bars put pressure treatment where restricted head movement is required.
under the throat which hinder some tasks such as bloat Chin bar height can be manually adjusted. Release is
bombing. The Diamond shape yoke is a much more a simple one-handed operation, even under pressure.
functional design.
7 Stabilizer bars transfer attempted outward movement at
2 Heavy Duty Slide Lock Headbail with infinite incremental the base of the headbail back to the frame of the cattle
catching positions. Quiet no-noise operation. crush. Thus, the bail arms remain absolutely parallel,
even under extreme pressure.
3 Drop - Away catching and release handle for safety.
Auto engage to facilitate catching. Australian Registered 8 Slam catchers on all swinging gates.
Design No. 14407/2008
9 Needle gate (with auto catch) for access to neck
4 Vertical open baffles. Vision of cattle is not restricted vaccinations. The gate is also wide enough to allow
hence cattle will walk up closer to it. Makes catching backlining.
easier.
10 Galvanised steel construction and then painted with
5 Bail arms will automatically open if the bail arms are Anti Corrosive Alkyd Based Zinc Phosphate Enamel
opened to within 4 inches of the side of the crush. This which custom made for National Stockyard Systems by
prevents hip caps being knocked if an inexperienced a leading industrial paint supplier. A Dry Film Thickness
operator does not fully open the headbail when of 50 microns is sought.
releasing the animal.
8
11 Designed to minimise dirt build up (thus rust).
Easy to clean.
23
12 The inconvenience of grease nipples is eliminated.
14 Yellow soft handle grips for safety and quickly locating control
levers.
25 Kick shut and open with foot Vet Gate. Gate can be operated
by an operator’s foot to maintain clean sterilised hands if
required.
21
23
18
4 9 14
15
3
12
8
1 13
3 20
17
16
7
22
6
11
10
19
1 Diamond shape yoke prevents excessive vertical head 6 Chin bar (standard on all crushes and head bails)
(thus whole body movement), minimising the need facilitates tasks such as ear tagging and pink eye
for engaging the chin bar. All chin bars put pressure treatment where restricted head movement is required.
under the throat which hinder some tasks such as bloat Chin bar height can be manually adjusted. Release is
bombing. The Diamond shape yoke is a much more a simple one-handed operation, even under pressure.
functional design.
7 Stabilizer bars transfer attempted outward movement at
2 Heavy Duty Slide Lock Headbail with infinite incremental the base of the headbail back to the frame of the cattle
catching positions. Quiet no-noise operation. crush. Thus, the bail arms remain absolutely parallel,
even under extreme pressure.
3 Drop - Away catching and release handle for safety.
Auto engage to facilitate catching. Australian Registered 8 Slam catchers on all swinging gates.
Design No. 14407/2008
9 Needle gate (with auto catch) for access to neck
4 Vertical open baffles. Vision of cattle is not restricted vaccinations. The gate is also wide enough to allow
hence cattle will walk up closer to it. Makes catching backlining.
easier.
10 Galvanised steel construction and then painted with
5 Bail arms will automatically open if the bail arms are Anti Corrosive Alkyd Based Zinc Phosphate Enamel
opened to within 4 inches of the side of the crush. This which custom made for National Stockyard Systems by
prevents hip caps being knocked if an inexperienced a leading industrial paint supplier. A Dry Film Thickness
operator does not fully open the headbail when of 50 microns is sought.
releasing the animal.
11 Designed to minimise dirt build up (thus rust).
Easy to clean.
10
12 The inconvenience of grease nipples is eliminated.
13 The crush is not cluttered with irrelevant features, thus lowering price and
enhancing visibility of stock and accessibility of animal husbandry.
14 Yellow soft handle grips for safety and quickly locating control levers.
18 Off side operation available but will incur a lead time and a price premium
of 5%.
19 The Folding Chin Clam (optional extra) bolts onto the head lifter, and, as
the head lifter is engaged, the chin clam folds into a U shape as the Head
Lifter is raised. Also, the head lifter, and, thus the chin clam are now height
adjustable
24 Top vet gate will lock independently allowing operator access to testicals, 27
back of udder etc.
28
25 Kick shut and open with foot Vet Gate. Gate can be operated by an
operator’s foot to maintain clean sterilised hands if required.
26 Single squeeze provides a simple push-pull action with automatic lock and
release for altering the width of the crush. Maintains good view of, and Single squeeze provides a simple push-pull
access for, neck vaccinating and injections. Most cattle will settle better if action with automatic lock and release for
movement is restricted. altering the width of the crush. It can be
activated from either side of the crush and
27 A squeeze crush facilitates marking calves or mickeys standing up and can maintains good view of, and access for,
eliminate the need for a calf cradle and associated panels / gates. neck vaccinating and injections. Most cattle
will settle better if movement is restricted.
28 Body gates are hinged inside squeeze gate, allowing full access through
top or bottom gate even when squeeze is applied.
30 Squeeze frame. Grade 450 RHS. Designed to flex but not bend. Note: There are no protruding ratchets/
levers and other possible injury points on the
National Stockyard Systems squeeze crushes.
The squeeze is activated and released via a
simple push-pull mechanism.
11
Crushes and Headbails
Hunter Pacifier (Our best selling crush)
5
2
27
26
24
21
9
14
15 23
18 4 12
28
3
8
13
1
20
3
25
17
16
7
10
19 22
11
6
1 Diamond shape yoke prevents excessive vertical head 6 Chin bar (standard on all crushes and head bails)
(thus whole body movement), minimising the need facilitates tasks such as ear tagging and pink eye
for engaging the chin bar. All chin bars put pressure treatment where restricted head movement is required.
under the throat which hinder some tasks such as bloat Chin bar height can be manually adjusted. Release is
bombing. The Diamond shape yoke is a much more a simple one-handed operation, even under pressure.
functional design.
7 Stabilizer bars transfer attempted outward movement at
2 Heavy Duty Slide Lock Headbail with infinite incremental the base of the headbail back to the frame of the cattle
catching positions. Quiet no-noise operation. crush. Thus, the bail arms remain absolutely parallel,
even under extreme pressure.
3 Drop - Away catching and release handle for safety.
Auto engage to facilitate catching. Australian Registered 8 Slam catchers on all swinging gates.
Design No. 14407/2008
9 Needle gate (with auto catch) for access to neck
4 Vertical open baffles. Vision of cattle is not restricted vaccinations. The gate is also wide enough to allow
hence cattle will walk up closer to it. Makes catching backlining.
easier.
10 Galvanised steel construction and then painted with
5 Bail arms will automatically open if the bail arms are Anti Corrosive Alkyd Based Zinc Phosphate Enamel
opened to within 4 inches of the side of the crush. This which custom made for National Stockyard Systems by
prevents hip caps being knocked if an inexperienced a leading industrial paint supplier. A Dry Film Thickness
operator does not fully open the headbail when of 50 microns is sought.
releasing the animal.
11 Designed to minimise dirt build up (thus rust).
Easy to clean.
12
12 The inconvenience of grease nipples is eliminated.
13 The crush is not cluttered with irrelevant features, thus lowering price and
enhancing visibility of stock and accessibility of animal husbandry.
14 Yellow soft handle grips for safety and quickly locating control levers.
18 Off side operation available but will incur a lead time and a price premium
of 5%.
19 The Folding Chin Clam (optional extra) bolts onto the head lifter, and, as The amazing flexibility of the double squeeze
the head lifter is engaged, the chin clam folds into a U shape as the Head Hunter Pacifier.
Lifter is raised. Also, the head lifter, and, thus the chin clam are now height
adjustable
21 Leverage assisted split sliding gate. This innovative gate blocks the
following animal from both sides. Often the following animal has it’s head
over the rump of the leader. It is much easier to baulk the head instead
of trying to jam a conventional sliding gate on the shoulder. Further, if
the operator can reach the handle the gate can be closed or opened.
Closing is spring assisted (with auto lock) and opening is auto release.
Following cattle will stand closer to the gate and sheet rattle noise is
eliminated. Base of sliding gate travels on raised RHS on a heavy flat bar
base. (Gates which travel in a channel are prone to jamming due to rock
and dirt build up). Pantograph operation. Australian Provisional Patent
Application No. 2007792950
13
Crushes and Headbails
Bullock Standard (Very heavy duty - no squeeze)
Suited to all but extreme conditions this crush enjoys the same features as the Hunter Standard but is a beefed up considerably to
handle a heavier workload. Note the increase in the steel dimensions throughout the whole crush
Crush floor is available (3mm Load Cell or H- Bar mounting brackets can be Baulk Gate. Cattle will not go
checker plate) and fully welded in fitted to all NSS Crushes. through, over or under the
crush to prevent rattle. double concertina quick hitch
baulk gate.
14
Crushes and Headbails
Bullock Pacifier (Very heavy duty - double diagonal sqeeze)
Suited to all but extreme conditions this crush enjoys the same features as the Hunter Pacifier but is a beefed up considerably to
handle a heavier workload. Note the increase in the steel dimensions throughout the whole crush
Folding chin clam does not Swivel Posts allow draft Kat Golderman, Lochinvar
have a big bowl, thus swivel gates to clear animals
head while still in headbail.
“I needed a robust heavy crush for my husbandry
chain latch posts & drafting
units etc can sit right beside Posts will swivel to allow requirements. The NSS crush linkages are light, quick
the headbail uninterupted access to head and very easy for us ladies to us”.
15
Crushes and Headbails
Hunter Headbail
11 Off side operation available but will incur a lead time and
4 a price premium of 5%.
5 Chin bar facilitates tasks such as ear tagging and pink eye
treatment where restricted head movement is required.
Chin bar is standard and can be released via one-handed
operation. The over centre operation will not jam and can
be released if under pressure.
16
LOADING RAMPS
All National Stockyard Systems loading ramps are fully galvanised and feature a patented concrete
floor (except budget) with plenty of treads.Timber floors are subject to rot, white ant attack and fire. Steel
floors are prone to noise and rust.
All ramps have a closed in base to prevent legs getting outside of the ramp. Overhead bracing is
standard on both ends of the ramp to prevent side spread.
Note: The bumper board at the front of the ramp is adjustable to cater for different height
trucks. Flat load out platforms with mangate also available.
Platform standard lengths are 1.0 meters and 2.1 meters.
All loading ramps (including budget) now come
with sleeves and concretable spiggots to
prevent the ramp being shunted by trucks
17
LOADING RAMPS (Hawkesbury)
3200mm
1100mm
RAMP SLOPE
19º
3200mm
1300mm
RAMP SLOPE
450mm
19º The height is quickly adjustable by lifting the floor and
sliding the chain, a child could adjust the height of
this loading ramp 25 in one inch increments from box
trailer height, ute body height to semi trailer height.
18
(Hunter) Hunter 3.6 Meter Adjustable Height
3200mm
2300mm
1700mm
1300mm
16º
Pictured with height around 800mm for back of Ute. Ramp is easily
Specifications same as Hawkesbury 3.0 meter
adjustable from 450mm to 1300mm.
except the rails increase in size to 75 x 40mm.
The ramp is available as standard, adjustable, with walkway or any
The ramp is available as standard,
combination. (Note: all ramps now come with sleeves and
adjustable, with walkway or any combination.
spiggots as shown below). This is probably our most popular ramp.
19
Loading Ramps (Bullock)
Bullock 4.2 Meter Ramp with Walkway & 1.0M
front extension. The access gate swings across
to block the ramp.
RAMP SLOPE
13º
RAMP SLOPE
16º
Bullock 3.6m Adjustable is a popular ramp All non-adjustable height ramps come with a floating
bumper board that easily caters for different height
trucks
20
Loading Ramps Concrete Floor
• INDIVIDUAL PADS ARE 800mm LONG
• NO BAULKING NOISE
• WILL NOT RUST
• TREADS EVERY 200mm
• LESS SLIP
• STRONGER AND LAST LONGER THAN TIMBER
• MODULES AVAILABLE FOR SALE
• Compression tested – Elastic at 3 tonne – Fracture at 3.6 tonne
8
10
10
5 6
4
3
8
9 2
8
10 1
1
10 1
1
4
1
2 3
8
1 Pictured a Bullock 3.6m Ramp with Front
1 Platform. Pictured a Bullock 5.0M Ramp with truck access
door and walkway.
1.
1 Concretable drop in posts to prevent movement (standard on all ramps).
2.
2 Adjustable height front bumper.
3
3. Sheeted sides.
4
4. Closed in rails to prevent heads going through.
5.
5 Gate can block off more cattle coming up ramp if operator going into
the truck to pen up.
6 Gate can close off truck door to prevent cattle coming back whilst
6.
operator penning up truck.
7 Rails behind truck block off gate prevent cattle going over side of ramp
7. Ken & Libby Burkinshaw, Lockhart
if truck block off gate accidentally left in wrong position.
“We needed 2 sets of yards. I did my
8.
8 Concrete floor
homework very carefully before deciding
9
9. Walkway with handrail. on National Stockyard Systems. The rail
10
10. High overhead bracing spacing allows us to work sheep in the yards
as well and even sheep pour up our ramp”.
*Concrete floor standard on all ramps! (except budget)
*Except adjustable height section
21
Yard Design
Opti
degrees.
ona
2
lR
amp
2 Manways are wide enough to prevent an animal 4
9
being caught by the hips if accidentally left open or Optional Crush
The gate folds right back 180º The gate will still go through over
behind stock flow. This prevents 100º in case stock needed to be
stock, especially calves getting caught brought back against the normal
behind the gate. The gate can then stock flow direction.
be swung shut from any position.
22
Realistic yard working capacities are AREA REQUIREMENTS FOR WORKING YARDS
quoted. Generally capacities and total Holding Yards Forcing Yards
holding numbers are based on area
100 – 300 kg 1.3M2 0.6M2
requirements to handle and work 400kg
cattle. 300 – 500 kg 1.4M2 1.0M2
Cows and calves will require double this
Over 500 kg 1.6M2 1.2M2
area.
A circular yard with the same perimeter Cows & Calves 2.2M2 2.2M2
has a greater surface area than a square
• Holding capacities quoted on our plans are based on 400 kg dry cattle
or rectangle yard (and stock flow better). • Cows and calves should never be tightly forced or in the race together
The central pound allows for one person drafting and transfer of stock anywhere through the yards.
When utilising the pound for drafting the slam pin is rolled back so the pin does not protrude. The stop prevents the
gates having to be latched every time an animal is drafted. One person can draft 4 separate ways with a 6 sided
pound (5 gates, 1 panel) and 7 separate ways with an 8 sided pound.
23
Can mix and match differing panel styles, e.g. Hunter in race, pound and force, GP in balance.
Wider entrance gates can be added if required and Most gates close on the outside of the yard. As the gate can
a gate can be added anywhere. Pictured 4m 5 Rail be swung and latched from any position this means you are
Hunter entrance gate. Note the larger steel profile closer to the centre of the yards resulting in less walking and
used to keep the frame square. more efficient cattle flow.
The Steel
All rail profiles are manufactured by Australian Tube Mills. The sections are doubly – symmetric oval for increased
bending strength, bruise minimisation and stiffness in stockyard applications. The rail is manufactured to High
Tensile Grade 350LO- 450LO, confirms to Australian Standards AS 1163, and is galvanised inside and out for
long lasting rust protection. The posts used confirm to the same properties as the rail.
Bad corners in yards which have to be Bruise or cut points as stock pass. This is as far as the gate will open. This
blocked off, caused in part by the gate Under pressure this gate frame will results in gates broken off their hinges
hinging the wrong way (because the bend and render the slam catch due to the massive fulcrum effect if a
gate will only swing 90 degrees) useless. Also gate can fly straight past beast hits or backs into a gate
the keeper.
A common hinging and latching A drop bolt catch can be a Note the gap between the
system. The double acting hinge rib catcher and is slow to panels or gates (is easy to
which allows the gate to swing 360 latch breaks a leg if a leg comes
degrees can suck back and leave a down between panels). And
big gap between the post and the these pins will rattle
gate
25
The Panel Styles
PANEL RAIL AND POST DIMENSIONS
GP HUNTER BULLOCK
Rail Number (Height mm) 5 (1600) 6 (1700) 5 (1600) 6 (1700) 5 (1700) 6 (1800)
GP (General Purpose)
Economical panel for the smaller
operator. The rail is stronger than
it looks and clients have built GAP
yards for up to 100 head utilising
this rail. It would be unsuitable for BETWEEN
large stirred bullocks. RAILS
This rail is suitable for most
handled cattle.
210mm
210mm 245mm
1700
210mm 210mm
210mm
297mm
210mm
GP 6 - Rail Panel 2.2m
297mm
230mm 273mm
230mm
372mm
246mm
210mm
1600 180mm
140mm
100mm
100mm
100mm
100mm
223mm
251mm
188mm
208mm
GAP
188mm
1700
1600 208mm BETWEEN
188mm
208mm RAILS
188mm
275mm 350mm
27
Bullock
Suited for all applications.
The Bullock 6 is the heaviest stock item
manufactured and, at 1800mm high
with 6 rails cattle will not get their head
through it. It is popular with producers
handling stock of questionable
temperament. The Bullock 5 is an
aesthetically pleasing and robust yard
and is our main seller in this profile.
We also manufacture a 1700mm high
6 rail panel that calves will not get their
head through
190mm
250mm
170mm
190mm
1800 170mm
1700 190mm
170mm
190mm GAP
170mm
305mm 240mm
BETWEEN
RAILS
Bullock 5 - Rail Panel 2.2m Bullock 6 - Rail Panel 3.2m
Concrete Stamping
The best finish is to stamp your concrete with a
heavy piece of 4” pipe or PVC. This limits cattle
slipping.
28
The Joining System
Best of both worlds “the environment of permanent yards with the
flexibility and price of relocatable yards“
• The joining system utilises elongated hole cleats, which mean that the panels will follow most ground
undulations.
• Bolts are M12-30 hot dip galvanised with a wide flat head. Washers are hot dipped 32mm wide and nuts
are standard hot dipped.
• This system is protected by Australian Registered Design No 14534/2005 and totally
eliminates the noise associated with conventional pinning systems.
• Whilst eliminating panel rattle noise, gate sag etc the joining system will offer a degree of movement if a
beast hits a panel hard.
• It only takes about an extra 10% time to build the NSS yards compared to others. (Dropping a pin in or
putting a nut and washer on the bolt is the quickest and easiest part of yard erection).
• The need for cost-adding false posts that others require is eliminated.
• There is no gap at the top of the panels for an animal (particularly horses) to get a leg caught in.
• Note: The third middle lug on Hunter 6 and Bullock Panels. This transfers impact on the
gate to the associated panel posts which means that the gate frame cannot bow and the
slam catch pop under pressure (Hunter 6 and Bullock 5 and 6 only).
Wilson Co on behalf of William and Tony Chau Ulan Doug Clark, Black Hill
“The yards were easily the best I saw at the field days “Our yards are great and still as good as
and the gates and bolt together joining system made my the day we bought them 4 years ago.
decision easy”. We love the gates and the lack of noise”.
29
The Gate
The gate system and joining system are protected by Australian Registered
Design No 11434/2005 and Australian Patent No. 2009100939.
This revolutionary gate and joining system was also awarded the
Encouragement Award at the prestigious “The Land & NSW Farmers Association
Farm Inventor Of The Year Competition” at Ag Quip 2005.
The system is exclusive to National Stockyards Systems Pty Ltd.
1
3
5
7
9
8
10 11
4 4
1 Mitre cut and welded for strength (not straight 8 Solid continuous gudgeon allows for vertical
cut or bent). movement to override the fail safe slam catch
if required.
2 Gusset braced to maintain frame square.
9 Slam catch is standard on all gates under 4.1M
3 Auto stop on top of gate, combined with bottom on all yards from GP 5 Rail to Bullock 6 Rail.
stop prevents gate twisting after repeated Even small yards for small numbers should
slamming. facilitate easy, low stress and enjoyable stock
handling.
4 Ground pin cleats standard. Ground pins
included with all pricing. 10 Not just a generic gate. Note the left hand or
right hand closing of the gates. This tailors each
5 Gate swings back 180 degrees to follow cattle gate to cattle flow requirements. (Pictured is a
flow and generally rests beside a panel to right hand closing gate).
prevent stock being stuck behind it or breaking
gate off its hinges. Also a 2.5-meter gate can be 11 Most gates close on the outside of the yard. As
closed while standing 5 meters from the latch. the gate can be swung and latched from any
position this means you are closer to the centre
6 Fail safe stop prevents gate flying past slam of the yards which mean less walking.
catch.
7 Gate will swing over 90 degrees through if cattle Slam catches standard on all gates under
flow direction is required to be reversed. This is 3.3metres
simply achieved by lifting the gate.
30
Double entrance gates are supplied with an
800mm long chain so they can be chained
back to an adjoining panel to facilitate stock
The Pegging Down
entrance.
Ground pins are supplied with all NSS yards. Two pins
are supplied with all gates, manways, bows and sliding
gates. The 400mm Y16mm deformed bar pegs are driven
through the standard pin lugs. If yards are not pegged
Two chains and catches are supplied with down the yards will move and distort under normal
all double gates. Both gates can be chained pressure. If the pins are not required, the price will be
back against the panel deducted from the purchase price. If the panels are also
required to be pegged, then a peg down plate can be
purchased which are installed as the panels are joined.
• Swing gates with slam catches are preferential to slide gates, especially at the front of the race where it will
open against the cradle.
• The calf race is adjustable width to a maximum of 450 m and the width can be adjusted on property to suit
individual requirements. (400mm or 16” is the traditional standard).
• (Many producers are utilising a squeeze crush and mark calves standing up. This practice is very effective
as it is a one-person operation and only requires a small increase in skill to mark a calf standing up
utilising a National Stockyard Systems squeeze crush).
4 6
5
3
Ashley & Glenda Gardiner, Bunnan
2 “The yards are absolutely marvellous. We
8
could not be happier. We have to do most
of our cattle work on weekends and it is a
pleasure to process our cattle with ease.”
7
9
Op
2.2
tion
Stockyard sometimes alter plans slightly
al R
MW
am
p
2.3R
Optional Crush
2.5 to accommodate an efficient calf marking
2.2 area without sacrificing other operational
2.2
2.2 2.2
efficiency.
2.3R
2.2 2.5
MW
4.0 2.2
2.2 2.5
MW
2
54M 2.3R
2.3R
2.5
21.8M
2.3R
2.2 5.2M
2.3R
4.0 2.3L
3.3L
2.3L
C Copyright-2007-National Stockyard Systems 2.2
2
2 43M
89M
2.2 2.2
17.9M
NSS130-3PCR (CALF)
2.2
Op
MW
am
p
4.0 2.3L
3.3L
2.3L
C Copyright-2007-National Stockyard Systems 2.2
2
2 43M
89M
2.2 2.2
Don McFarlane, Cudal
17.9M
“I spent two days at the Orange Field Days
c Copyright - 2006 National Stockyard Systems Pty Ltd
and National Stockyard Systems had the best
quality yards there”.
35
Other Components
6
6 6
1 1 1
4 4
3 3
4 3
2
2
2
5
7 8 7 5 7
8 8 Australian Patent No. 2009100839
GP Slide Gate Hunter Slide Gate Bullock Slide Gate Split Slide Gate (Closed)
1 All slide gates operate on rollers, note the extra rails. 5 Flat bar base on Hunter and Bullock for longevity.
2 The gap between the rails is GP 169mm, Hunter 6 Height is 1995mm (GP) 2200mm (Hunter & Bullock).
147mm, Bullock 107mm.
7 Self cleaning base.
3 These gaps minimise the opportunity for cattle to get
their head through.
8 Peg down lugs standard.
36
Manways are wide enough to prevent an animal getting
caught by the hips if the gate is accidently left open, or they
can be used to file stock through if required. Slam catch is
standard on Hunter and Bullock and they are included in most
plans, thus are not a hidden extra.
An extra slide is also standard on all 5 and 6 panel race
designs.
The Paint
In April 2006 National Stockyard Systems commissioned a leading industrial paint supplier to manufacture and
supply a custom made -215 Anti Corrosive Alkyd Based Zinc Phosphate Enamel- to enhance product longevity.
A Dry Film Thickness of 50 microns is sought.
37
Cattle Drafting
Drafting cattle is becoming more frequently required due to changes such
as tighter feeder weights, the continuing dry, cell grazing, early weaning and
overall improved management practices.
NSS has developed a series of drafters that allow 1 person drafting and the
very quick Glenrock Overhead Drafter that requires more than 1 person.
Noel Ray, Denman
“The Hicks Drafter excellent and
The Hicks Draft/Baulk Combination makes our drafting easy. All their
Australian Patent No. 2009100838 gear is good.”
39
CCC Speed Draft/Baulk Combination
The CCC Speed Drafter enables 5 gates to be worked from the 1 location. This is as quick and more reliable than
air operated. There is a manual lever control to the 2 front draft gates enabling a 3 way draft whilst standing at the
back of the crush. If an NSS V-Race is incorporated leading into the crush the sliding gate on the V-Race section
prior to the crush can also be opened and closed via a direct linkage from this point. Obviously the crush entrance
and exit can also be operated from this single position. This system is brilliant when weighing cattle.
If access to the head is required there is a manual 3 way draft between the Baulk Gate and the Speed Gates.
Every gate on the unit will remain where it is supposed to until moved by the operator (even on a very windy day).
The first time this unit was used 150 steers had a HPG implant, the associated triangler ear notch, a 5-in-1
vaccination and a backline treatment, all completed in under 21/2 hours. Throughput, with 3 people, was on
average one steer in under a minute
Handle for
on-side draft
(gate open)
Headbail operating Sp
handle en lit sli
tra de
nc
eh
an
dle
Work 5 gates
while standing
in one location
Slide in V-Race
handle
Work 5 gates
while standing
in one location
40
The pictured off-side draft gate in Outstanding access to the Manual 3 way draft available from front
open position (see handle for off- headbail of headbail
side draft gate)
Note the double catch utilised when replacing panels Concreting Posts In.
with gates on the outside of the race. These gates The symmetrical joining system allows for easily locating
make it easy to get an animal out that goes down and concrete holes for permanent yards. Long straight runs
animals can exit the race without having to go through need posts concreting in the ground.
the crush.
42
Pneumatic / Air operated
A full range of pneumatic / air operated slide gates, drafters and crushes is
available from National Stockyard Systems. Full remote control operation
is available at a fraction of the cost of conventional remote control with
multiple remote control key-pads for each yard. This means that any person
working in the yard can open any gate from a distance. An added bonus
is that everything can be operated manually if the air compressor or power
fails.
Pictured. Part of the race from an NSS-850-5PCR The first time these yards
were used 1300 steers were processed in one day with a through-put of
150 head per hour.
Len Donavan, Kangaroo Valley
Curved ‘V’ Race ‘’The V Race is the best and most
practical on the market”.
1 1
1
3 8
6
5
3
5 7 7
8
4 2
6
8
1. Design, engineering and strength of materials used eliminates the
need for overhead bracing
2. Base is made ready to fill with concrete
2
3. 1800mm high on outside (discourage jumpers) and rail spacing
120mm (no heads through)
4. 1700mm high on inside (comfortable lean over height). Rail spacing
190mm (can get arms through if required)
4
5. Noise deadening manufacture process used on sheeting
6. Double walkway standard
5 7. Clever gate hinging results in gates swinging aver 90 degrees (instead
of flopping onto the ground
8. Middle bend restrains animals better in race (instead of a straight V
that others use)
9. Available straight or curved (6.2m radius)
43
Other Yards from National Stockyard Systems
Our bolt together joining is perfect for horse yards and horse complexes. There are over 20 panel styles to choose from.
44
The Service
• The sales team represents over 100 years of practical stock experience
• Full computer aided drawing (CAD) to assist in the design of your custom yard.
• Full range of detailed mirror reversed plans available
• Delivery and erection available
• On property consulting and design available utilising the miniature panels
GATE GATE
THORNE 2
GATE
EXISTING FENCES
GATE
2.6R
2
111M
2 2.5
121M 2.5
Draft Box Optional Crush 2.5
A 2.5 2.2
2.2 2.2 2.5
2.3
2.5
2.2
2.6R MW
2.2 2.2
EXISTING LANEWAY
MW
24.3M
2.6L 2
2.6L 2.2
Pound 66M
Diameter 2.5
5.2M
2.6L
2.2
2.5
2.6R
2 2.6R
163M
2.5
3.3R
GATE
2.5 2.5 2.5
26.3M
The longer panels utilised in non-pressure areas The Draft Box includes a Baulk Gate and a double concertina set of 4 All yards include all joining bolts, ground pins,
result in yards larger than they appear on paper gates that fold past the head of the animal in the crush with auto catch and slam catches on all gates under 3.3M
and is protected by an Australian Patent Application No. 2007902949
(Awarded first prize in the Ag Quip inventor’s competition 2008)
If one of our standard plans do not suit we will custom design your yards.
c a n
W e
i v e r
d e l
We have yards and crushes Australia wide
c a n
We
E R E C T
46
The Standard Plans
Optional Ramp
Panel Meters 17.6
Yard Gates 3 5.5M
Gate meters 6.9
11.5M
NSS11-0PSR
Optional Ramp Optional Crush
14.7M
11.5M
Total yard area is 53 square meters (hold 38 head)
Total yard area is 41 square meters (hold 25 head)
Yard Gates 4
2.3L
Gate meters 9.2 6.7M 2.5
3.2
2.2 3.2
2.3R
14.6M 15.0M
Op
tio
2.2
na
lR
MW
am
p
2.5
2.3R Optional Crush
Note the clean work 2.2
Panel Meters 31.0
Panel Meters 31.0 area around the front
Gates
Yard Gates 44 of the crush 2.2
Gate Meters 9.2 7.7M 2.2
Gate
Manwaysmeters 9.2
0 3.2 C Copyright-2006-National Stockyard Systems 2.2 10.4M
Slide Gates
Gates A gate parrallel in front
Slide 11 of the crush cannot be swung 2.2
2
past the head while the animal 65M
is in the headbail. 2.2
2.3R
3.2
2.2
3.2
3.2
Locate yards in corner of paddock 2.3R
Opt
iona
l Ram
Optional Ramp Optional Crush Panel Meters 54.7
Gates 4
p
Gate Meters 9.2
Optional Crush
Manways 1
Draft Box 1
Panel Meters 34.5 Slide Gates 1
Yard Gates 4
Gate meters 9.2 Optional Ramp Optional Crush
Manways 1 7.8M
Panel Meters 40.8 13.5M
Slide Gates 1 14.9M
Yard Gates 4
Gate meters 10.3 Panel Meters 54.7
Manways 3 Yard Gates 4
Slide Gates 1 Gate meters 12.5
Manways 1
Slide Gates 1
16.9M
Panel
PanelMeters
Meters 51.6
51.6
Yard
GatesGates 5 5
Gate meters
Gate Meters 14.8
14.8
Manways 1
Panel Meters 53.1 Manways
Slide Gates 1 1
Yard Gates 5 Slide Gates 1
Slide Gates 1
19.9M
20.2M
Opt
iona
iona
l Ram
l Ram
p
Optional Crush
Optional Crush
17.0M
17.0M
Total yard area is 181 square meters “The value and gates convinced me”.
Total yard area is 174 square meters
(hold 124 head) (hold 129 head)
48
48 c Copyright - 2006 National Stockyard Systems Pty Ltd
NSS80-3PCR NSS80-3PCR-CALF
Opt
iona
Raml
Opt
p
iona
l Ra
Optional Crush
mp
Optional Crush
18.0M Cra
dle
18.0M
NSS88-3PCR-RF NSS95-3PCR-RF
NSS95-3PCR-RF
16.6M
M
22.3M 24.8M
NSS100-3PCR NSS110-4PCR
Opt
iona
Optio
l Ram
p
Ram
Optional Crush
21.8M
19.6M
18.3M 17.0M
Total yard area is 248 square meters (hold 177 head) Total yard area is 221 square meters (hold 158 head)
Optio
nal
Ram
p
Optional Crush
2.2
19.3M
NSS128-4PCR
NSS113-3PCR
Opt
iona
Raml
p
Optional Crush
Optional Crush
22.0M
21.8M
5.2M
17.9M 16.8M
Total yard area is 272 square meters (hold 193 head) Total yard area is 270 square meters (hold 193 head)
NSS130-3PCR NSS130-3PCR-CALF
2.2
Op
tion
Op
2.2
al R
MW
tion
2.3R 2.5
Yard Gates 15
p
Optional Crush
Optional Crush
2.5 Yard Gates 12
2.3R
Gate meters 29.5 2.2
Gate meters 33.1
2.2
2.2 2.2 Manways 3 Manways 3
2.2 Slide Gates 1
2.2 2.2 Slide Gates 1 ck
Anti-Ba
2.3R Swing 2.2 2.5
2.2 2.5 2.3R Cradle
Calf
Race
Calf marking facilities can be 2.2 MW
MW 4.0
easily added to most yards.
2.2
4.0 2.2 2.2 2.5
2.2 2.5
MW
MW 2
2
49M 2.3R
54M 2.3R
2.3R
2.3R 21.8M
21.8M 2.5
2.5 2.3R
2.3R 2.2 5.2M
2.2 5.2M 2.3R
2.3R
4.0 2.3L
4.0 3.3L
3.3L 2.3L
2.3L
2.3L C Copyright-2007-National Stockyard Systems 2.2
C Copyright-2007-National Stockyard Systems 2.2
2
2 2 43M
2 43M 89M
89M
2.2 2.2
2.2 2.2
17.9M 17.9M
Total yard area is 272 square meters (hold 193 head) Total yard area is 272 square meters (hold 193 head)
Opti
ona
l
Ram
p
Optional Crush
Optional Cradle
Opti
rush
ona
nal C
l
Ram
Optio
p
(All you need is a real good team of dogs)
27.6M
Plenty of gates
15.0M
Free Delivery
20.6M
NSS146-2PCR-RF NSS160-4PCR
Opt
Op
tion
iona
al R
l Ram
am
p
p
The use of longer panels
Optional Crush
in non-pressure areas
makes the actual NSS
yards bigger than they
do on paper.
Op
tion
al
Cru
sh
5.2M
Total yard area is 336 square meters (hold 240 head) Total yard area is 320 square meters (hold 228 head)
NSS161-
3PCR-Horse
Combination Pound
Diameter
5.2M
31.7M
2.2
of the crush.”
c Copyright - 2006 National Stockyard Systems Pty Ltd Total yard area is 435 square meters (hold 310 head) 51
NSS166-3PCR
Panel Meters 110.8
Yard Gates 12
Gate meters 30.7
Manways 1
Slide Gates 1
23.5M
Optional Crush
p
am
a lR
ti on
Op
25.3M
Panel Meters 132.9 24.8M
X
Yard Gates 14
Pound
Gate meters 36.8 Diameter
5.2M
Manways 3
Slide Gates 1
Draft Box 1
26.8M
20.8M
Total yard area is 387 square meters (hold 276 head) Total yard area is 495 square meters (hold 335 head)
NSS235-4PCR-CFA NSS253-4PCR-CALF
p
am
a lR
ti on
Op
A
m p
Ra
al
on
Crad
ti
Op
le
Anti-Back
24.8M 25.3M
X
Pound Pound
Diameter
Diameter
5.2M
5.2M
26.8M 32.0M
Total yard area is 496 square meters (hold 335 head) Total yard area is 602 square meters (hold 430 head)
Optional
Ramp
Draft Box Optional Crush
Pound
Diameter
6.0M
27.2M
Panel Meters 128.6
Yard Gates 15
Gate meters 39.8 29.4M
Manways 2
Slide Gates 2
Manways 3
Slide Gates 2
Draft Box 1
25.3M
Total yard area is 585 square meters (hold 418 head) 23.8M
23.8M 23.8M
Total yard area is 543 square meters (hold 388 head) Total yard area is 543 square meters (hold 388 head)
New rail type available. 150mm Light Steel Beam (LSB) Paul & Virginia, Tarana
2.0M high panel - 6 rail. 1.8M high panel - 5 rail
Unbelievably strong “The yards are outstanding and we are stoked”
c Copyright - 2006 National Stockyard Systems Pty Ltd 53
NSS280-4PCR
Optio
nal
Ram
p
Optional Crush
Total yard area is 576 square meters (hold 411 head) I have been after a set of yards for a while and have had a
good look around. One look at Greg’s was all I needed to
make my mind up.
NSS310-10-4PCR-RF NSS320-5PCR-CALF
42.6M
Optional Ramp
Optional Crush
Optional Crush
p
Cradl am
e lR
na
tio
Op
28.3M
27.8M
5.5M
27.0M
Total yard area is 647 square meters (hold 462 head) Total yard area is 873 square meters (hold 624 head)
New Product
Topless Race Bows
No overhead bracing for
quicker and more accurate
backlining etc.
Also the yards can be
built, cement poured
and stamped in the exact
position.
This saves dismantling the
race to pour the concrete
slab.
Conventional race bows shown on right
p
m
l Ra
na
tio
Op
26.3M
NSS370-4PSR NSS425-4PSR-CALF
Optional Ramp
Optional Crush
Optional Crush
Cradle
Panel Meters 191.0 Swing
Anti-Back
Panel Meters 164.4 Yard Gates 19
Yard Gates 16 Gate meters 58.1
Gate meters 43.3 Manways 4
Manways 3 Slide Gates 1
Slide Gates 1 Draft Box
Draft Box 1 1 34.0M
33.7M
Optional Ramp
Pound
Diameter
5.8M
6.0M
23.8M 25.2M
Total yard area is 745 square meters (hold 530 head) Total yard area is 850 square meters (hold 607 head)
Op
tiona
lR
am
p
Optional Crush
28.0M
NSS505-6PCR-CFA
p
am
lR
io na
DRAFT BOX Optional Crush Opt
29.6M
44.3M
NSS530-6PCR
1
Op
40.6M
56 Total yard area is 1067 square meters (hold 762 head) c Copyright - 2006 National Stockyard Systems Pty Ltd
NSS550-6PCR
p
al Ram
Option
31.3M
NSS630-6PCR
35.7M
42.7m
Stabiliser Stays
These stays with pegs
prevent sway in wings and
big holding yards.
Optional Ramp
“The brochure made my
decision easy even without
seeing the yards and now that I
have got them I reckon I made
the right decision”.
60.0M
NSS1250-6PCR-CFA
62
Increasing panel size on outer yards from 2.2m to 3.2m increases the yard capacity
by an amazing 112%. Believe it or not the increase is 229% utilising 4.0m panels.
The increase is 64% over 2.5m panels and 30% over 2.8m panels.
NSS 4.0m panels in Hunter and Bullock have been used by many of NSS clients.
63
National Stockyard Systems Pty Ltd
37B Kyle Street, Rutherford NSW 2320
Murray Schaefer
Mobile 0425 315 913
www.nationalstockyards.com.au
RV
MAITLAND
PARK D
AIRPORT
TO LOCHINVAR / SINGLETON
McDonalds
DENTON
Restaurant
NEW ENGLAND HWY
NEW
ENGL
AND TO M
KYLE STREET
HWY
AITL
AND
(3KM
WE ARE HERE )
E&OE (Errors & Omissions Excluded
RD
BRADMILL AVE
SALE YARDS
RS
OU
EC
AC