Professional Documents
Culture Documents
Operation & Maintenance Manual For DES
Operation & Maintenance Manual For DES
Alignment control
Radial run out
Axial run out
Connections
Axial deflection of flexible
Radial deflection of flexible
No load on fan connexion flanges
Page 1
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Guards control
On couplings
On cooling disk
On shaft between bearing
Inlet protective screen
Outlet protective screen
Fitting
Damper or guide vane blades fitted for pre rotation of gas flow at impeller inlet
Foreign objects
Fan inner inspection
Ducting inner inspection
Table. 1
Page 2
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Bearing temperature
Fan bearing-coupling side 15 mn after starting
Fan bearing-opposite coupling 15 mn after starting
Shaft seal
Temperature
Page 3
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Page 4
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Page 5
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Page 6
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
2.5 Premature A. Excessive vibrations A. Check and correct the various causes
wearing of of vibration
bearings
2.6 Impossible A. Locking of rotor A. Check and rotation of the fan and
starting or investigate for the locking causes
excessive starting (frictions, obstacles etc)
time
Page 7
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
Under such conditions, periodic vibration checks are recommended to determine any changes
in the condition of the fan.
Page 8
CENTRIFUGAL FAN MAINTENANCE HANDBOOK
11.20 Alarm
Page 9