One-component, solvent-
free, sililated polymer- E
PR LR | =i i VY
De Cmte ee mi
OTM tee well Tati: cy ie y/
({EMICODE EC1 R Plus),
Plas ase y
WHERE To USE
Bonding wooden parquet and all types and formats
of pro-inighed raterBatted: tian mta rato esbange edb
finished materials, lamparquet, slats, floor-boards and
all types of parquet on: cementitious screeds, screeds
made using Mapecem, Mapecem Pronto, Topcem.
‘Topoem Pronto and similar products, oid wooden
floors, ceramic, marble, torazz9, ec. and anhydrite
sereads: Its aloo suitable for heated subetrates,
TECHNICAL CHARACTERISTICS
Utrabond Eco $985 1K is a one-component, silatod
polymer-based adhesive without water, slants, with
8 very low emission level of volatile organic compounds
(EMICODE EC1 R Plus). tis manufactured according
to~ technology developed in MAPEI's own research
laboratories and has the following characteristic:
‘one-component, ready-to-use product; no catalyser
is required, therelore no mixing. I stored correctly,
remaining quantities ofthe product may be used
again at a later date;
«+ sullable for use by installers who are allergic to
‘290ny and enoxy-poiyurethane products:
‘+ GEV certiied, as a product with a very low
‘emission level of volatile organic compounds
(EMICODE ECt F Plus),
+ compatilo with Utraceat and Ultracoat Ol water
based varnishes and undercoats;
‘= no hazard risks and risk and danger symbols;
+ e05y to apply with excellent ridge holding;
+ 20-09% more yield compared with conventional
BCGHMAS
RECOMMENDATIONS
olor installation starts, doors and windows should
be installed
+ The humicity level inthe sereed must be compliant
vith that prescribed by the current standards for the
instalation of wood, and as indicated inthe technical
data sheet for the parquet
+i the substrate is not thoroughly dria, or Ht the
residual humidity is highor than the evel
precctibed, we recommend the usa ofa suitable
‘waterproofing primer, such as Eco Prim PU 1K,
Primer ME, etc
+ if there is @ risk of rising damp, 2 vapour barrier
‘must be installed before laying the screed.
+ Do not use Ultrabond Eco $955 1K ifthe temperature
is lower than +10°C or higher than +35°C.
+ Whon transported overlong distances, thermally
insulated containers may be required.
APPLICATION PROCEDURE
Preparation of the substrate
‘The substrate must be checked caroully to ascoss its
condition, and to prepare it fr laying parquet.