Professional Documents
Culture Documents
LM2931 D 30111
LM2931 D 30111
LM2931 D 30111
Input
6.0
30 k
6.0 k
6.8 V
350
500
Output
Output Inhibit
30 k 30 k 50 k
30 k *
48 k 180 k 184 k 5.8 V
3.94 k
Adjust EPI
3.0 k Bias
92.8 k *
11.5 k 35 k 10 k
Ground
http://onsemi.com
2
LM2931, NCV2931 Series
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage Continuous VI 40 Vdc
Transient Input Voltage (t ≤ 100 ms) VI(t) 60 Vpk
Transient Reverse Polarity Input Voltage −VI(t) −50− Vpk
1.0% Duty Cycle, t ≤ 100 ms
Electrostatic Discharge Sensitivity (ESD)
Human Body Model (HBM) Class 2, JESD22 A114−C − 2000 V
Machine Model (MM) Class A, JESD22 A115−A − 200 V
Charged Device Model (CDM), JESD22 C101−C − 2000 V
Power Dissipation
Case 29 (TO−92 Type)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 178 °C/W
Thermal Resistance, Junction−to−Case RqJC 83 °C/W
Case 221A, 314A, 314B and 314D (TO−220 Type)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 65 °C/W
Thermal Resistance, Junction−to−Case RqJC 5.0 °C/W
Case 318H (SOT−223)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 242 °C/W
Thermal Resistance, Junction−to−Case RqJC 21 °C/W
Case 369A (DPAK) (Note 1)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 92 °C/W
Thermal Resistance, Junction−to−Case RqJC 6.0 °C/W
Case 751 (SOP−8) (Note 2)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 160 °C/W
Thermal Resistance, Junction−to−Case RqJC 25 °C/W
Case 936 and 936A (D2PAK) (Note 3)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 70 °C/W
Thermal Resistance, Junction−to−Case RqJC 5.0 °C/W
Operating Ambient Temperature Range TA −40 to +125 °C
Operating Die Junction Temperature TJ +150 °C
Storage Temperature Range Tstg −65 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. DPAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 25 for board mounted Thermal Resistance.
2. SOP−8 Junction−to−Ambient Thermal Resistance is for minimum recommended pad size. Refer to Figure 24 for Thermal Resistance
variation versus pad size.
3. D2PAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 26 for board mounted Thermal Resistance.
4. NCV rated devices are subjected to and meet the AECQ−100 quality standards.
http://onsemi.com
3
LM2931, NCV2931 Series
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 5])
LM2931−5.0/NCV2931−5.0 LM2931A−5.0/NCV2931A−5.0
http://onsemi.com
4
LM2931, NCV2931 Series
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 7])
LM2931C/NCV2931C LM2931AC/NCV2931AC
Characteristic Symbol Min Typ Max Min Typ Max Unit
ADJUSTABLE OUTPUT
Reference Voltage (Note 8, Figure 18) Vref V
IO = 10 mA, TA = 25°C 1.14 1.20 1.26 1.17 1.20 1.23
IO ≤ 100 mA, TA = − 40 to +125°C 1.08 − 1.32 1.15 − 1.25
Output Voltage Range VO range 3.0 to 2.7 to − 3.0 to 2.7 to − V
24 29.5 24 29.5
Line Regulation (Vin = VO + 0.6 V to 26 V) Regline − 0.2 1.5 − 0.2 1.5 mV/V
Load Regulation (IO = 5.0 mA to 100 mA) Regload − 0.3 1.0 − 0.3 1.0 %/V
Output Impedance ZO mW/V
IO = 10 mA, DIO = 1.0 mA, f = 10 Hz to 10 kHz − 40 − − 40 −
Bias Current IB mA
IO = 100 mA − 6.0 − − 6.0 −
IO = 10 mA − 0.4 1.0 − 0.4 1.0
Output Inhibited (Vth(OI) = 2.5 V) − 0.2 1.0 − 0.2 1.0
Adjustment Pin Current IAdj − 0.2 − − 0.2 − mA
Output Noise Voltage (f = 10 Hz to 100 kHz) Vn − 140 − − 140 − mVrms/V
Long−Term Stability S − 0.4 − − 0.4 − %/kHR
Ripple Rejection (f = 120 Hz) RR 0.10 0.003 − 0.10 0.003 − %/V
Dropout Voltage VI−VO V
IO = 10 mA − 0.015 0.2 − 0.015 0.2
IO = 100 mA − 0.16 0.6 − 0.16 0.6
Over−Voltage Shutdown Threshold Vth(OV) 26 29.5 40 26 29.5 40 V
Output Voltage with Reverse Polarity Input −VO −0.3 0 − −0.3 0 − V
(Vin = −15 V)
http://onsemi.com
5
LM2931, NCV2931 Series
200 300
Vin -VO , DROPOUT VOLTAGE (mV)
80
100
IO = 50 mA
40
IO = 10 mA
0 0
0 20 40 60 80 100 0 25 50 75 100 125
IO, OUTPUT CURRENT (mA) TJ, JUNCTION TEMPERATURE (°C)
Figure 1. Dropout Voltage versus Output Current Figure 2. Dropout Voltage versus
Junction Temperature
350 6.0
I O , OUTPUT CURRENT (mA)
150 2.0
Dashed lines below Vin = 5.0 V
are for Adjustable output devices only. 1.0 RL = 50 W IO = 100 mA
50 0
0 5.0 10 15 20 25 30 0 1.0 2.0 3.0 4.0 5.0 6.0
Vin, INPUT VOLTAGE (V) Vin, INPUT VOLTAGE (V)
Figure 3. Peak Output Current versus Input Voltage Figure 4. Output Voltage versus Input Voltage
6.0
Vin , INPUT VOLTAGE
Vout = 5.0 V
RL = 50 W
(10 V/DIV)
VCC = 15 V
VO , OUTPUT VOLTAGE (V)
5.0
VFB1 = 5.05 V CO = 100 mF
t = 150 ms
4.0 TA = 25°C
3.0
0
VO, OUTPUT VOLTAGE
2.0
Vout = 5.0 V
(5.0 V/DIV)
1.0 RL = 500 W
TA = 25°C 0
0
-20 -10 0 10 20 30 40 50 60
t, TIME (50 ms/DIV)
Vin, INPUT VOLTAGE (V)
Figure 5. Output Voltage versus Input Voltage Figure 6. Load Dump Characteristics
http://onsemi.com
6
LM2931, NCV2931 Series
12 8.0
10 Vout = 5.0 V
IB , BIAS CURRENT (mA)
6.0 RL = 50 W
4.0
4.0
RL = 100 W 2.0
2.0
RL = 500 W
0 0
-20 -10 0 10 20 30 40 50 60 0 20 40 60 80 100
Vin, INPUT VOLTAGE (V) IO, OUTPUT CURRENT (mA)
Figure 7. Bias Current versus Input Voltage Figure 8. Bias Current versus Output Current
8.0 2.0
Vin = 14 V Vin = 14 V
Vout = 5.0 V Vout = 5.0 V
IO = 100 mA IO , OUTPUT IMPEDANCE ( Ω ) 1.6 IO = 10 mA
IB , BIAS CURRENT (mA)
95 95
RR, RIPPLE REJECTION RATIO (dB)
RR, RIPPLE REJECTION RATIO (dB)
85
CO(ESR) = 0.15 W 85
Vin = 14 V Tantulum
75 Vout = 5.0 V
DVin = 100 mV Vin = 14 V
RL = 500 W Vout = 5.0 V
75 f = 120 Hz
CO = 100 mF
65 TJ = 25°C
TJ = 25°C
CO(ESR) = 0.3 W
Electrolytic
55 65
10 100 1.0 k 10 k 100 k 1.0 M 10 M 0 20 40 60 80 100
f, FREQUENCY (Hz) IO, OUTPUT CURRENT (mA)
Figure 11. Ripple Rejection versus Frequency Figure 12. Ripple Rejection versus Output Current
http://onsemi.com
7
LM2931, NCV2931 Series
Δ VO , (2.0 mV/DIV)
Vin = 14 V
Vout = 5.0 V Vout = 5.0 V
RL = 500 W Cin = 1000 mF
18.5 CO = 100 mF
CO(ESR) = 0.3 W 100 CO = 100 mF
TA = 25°C CO(ESR) = 0.3 W
TA = 25°C
INPUT VOLTAGE,
14 0
I out (mA)
V in, (V)
IO = 10 mA 2.5
Vin = Vout + 1.0 V Vin = Vout + 1.0 V
1.220 Output “Off"
TA = 25°C TA = 25°C
2.4
1.200 2.3
2.2
1.180
2.1 Output “On"
1.160 2.0
0 3.0 6.0 9.0 12 15 18 21 24 0 3.0 6.0 9.0 12 15 18 21 24
VO, OUTPUT VOLTAGE (V) VO, OUTPUT VOLTAGE (V)
Figure 15. Reference Voltage versus Output Voltage Figure 16. Output Inhibit−Thresholds
versus Output Voltage
APPLICATIONS INFORMATION
The LM2931 series regulators are designed with many limit must be observed over the entire operating temperature
protection features making them essentially blow−out range of the regulator circuit.
proof. These features include internal current limiting, With economical electrolytic capacitors, cold temperature
thermal shutdown, overvoltage and reverse polarity input operation can pose a serious stability problem. As the
protection, and the capability to withstand temporary electrolyte freezes, around − 30°C, the capacitance will
power−up with mirror−image insertion. Typical application decrease and the equivalent series resistance (ESR) will
circuits for the fixed and adjustable output device are shown increase drastically, causing the circuit to oscillate. Quality
in Figures 17 and 18. electrolytic capacitors with extended temperature ranges of
The input bypass capacitor Cin is recommended if the −40° to +85°C and − 55° to +105°C are readily available.
regulator is located an appreciable distance (≥ 4″) from the Solid tantalum capacitors may be a better choice if small size
supply input filter. This will reduce the circuit’s sensitivity is a requirement, however, the maximum ⏐ZO⏐ limit over
to the input line impedance at high frequencies. temperature must be observed.
This regulator series is not internally compensated and Note that in the stable region, the output noise voltage is
thus requires an external output capacitor for stability. The linearly proportional to ⏐ZO⏐. In effect, CO dictates the high
capacitance value required is dependent upon the load frequency roll−off point of the circuit. Operation in the area
current, output voltage for the adjustable regulator, and the titled “Marginally Stable” will cause the output of the
type of capacitor selected. The least stable condition is regulator to exhibit random bursts of oscillation that decay
encountered at maximum load current and minimum output in an under−damped fashion. Continuous oscillation occurs
voltage. Figure 22 shows that for operation in the “Stable” when operating in the area titled “Unstable”. It is suggested
region, under the conditions specified, the magnitude of the that oven testing of the entire circuit be performed with
output capacitor impedance |ZO| must not exceed 0.4 W. This maximum load, minimum input voltage, and minimum
ambient temperature.
http://onsemi.com
8
LM2931, NCV2931 Series
Input Output
Vin Vout
LM2931C
51 k
Output Adjustable R1
2 Inhibit Output Adjust
Cin
CO
0.1
1 IAdj
IB GND R2
ǒ Ǔ
0.1 IB
R R 1R 2
V out + V 1 ) 2 ) I R 2 22.5k w
ref R1 Adj R 1 ) R 2
Figure 17. Fixed Output Regulator Figure 18. Adjustable Output Regulator
RSC
D45VH7 Input
Input
≥ 6.0 V
68 R R
Output
5.0 V @ 5.0 A LM2931-5.0
LM2931-5.0
+ + Output + +
100 100 100 100
The LM2931 series can be current boosted with a PNP transistor. The The circuit of Figure 19 can be modified to provide supply protection against
D45VH7, on a heatsink, will provide an output current of 5.0 A with an input short circuits by adding the current sense resistor RSC and an additional PNP
to output voltage differential of approximately 1.0 V. Resistor R in transistor. The current sensing PNP must be capable of handling the short
conjunction with the VBE of the PNP determines when the pass transistor circuit current of the LM2931. Safe operating area of both transistors must be
begins conducting. This circuit is not short circuit proof. considered under worst case conditions.
Figure 19. (5.0 A) Low Differential Figure 20. Current Boost Regulator with
Voltage Regulator Short Circuit Projection
Input
6.4 V to 30 V +
LM2931C 2.0 k
100
8.2 k
CM
#345
+ 33 k
100 6.2 V
0
fosc = 2.2 Hz
http://onsemi.com
9
LM2931, NCV2931 Series
100 0.60
Vn , OUTPUT NOISE VOLTAGE (mVrms) Vin = 5.6 V 10 mF
Vout = 5.0 V
0.50 22 mF Unstable
IO = 100 mA Unstable
10 47 mF
Vnrms 10 Hz to 10 MHz
|ZO| @ 40 kHz 0.40 100 mF
Marginally
ESR (Ohms)
TA = 25°C
Stable
1.0 0.30
Stable
0.20
0.1
Note - Optimum stability uses a 22 mF
Stable 0.10 output capacitor. Output capacitor values
below 10 mF are not recommended.
0.01 0.00
10 100 1.0 k 10 k 0 10 20 30 40 50 60 70 80 90 100
|ZO|, MAGNITUDE OF CAPACITOR IMPEDANCE (mW) OUTPUT CURRENT (mA)
Figure 22. Output Noise Voltage vs. Figure 23. Output Capacitor ESR Stability vs.
Output Capacitor Impedance Output Load Current
170 3.2
150 2.8
PD(max) for TA = 50°C
JUNCTION-TO-AIR ( °C/W)
130 2.4
ÎÎÎÎÎÎÎÎÎ
110 Graph represents symmetrical layout 2.0
ÎÎÎÎÎÎÎÎÎ
90 2.0 oz. 1.6
L
Copper
70 1.2
L 3.0 mm
50 0.8
RqJA
30 0.4
0 10 20 30 40 50
L, LENGTH OF COPPER (mm)
Figure 24. SOP−8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
100 2.4
PD, MAXIMUM POWER DISSIPATION (W)
90 Mounted 2.0
JUNCTION-TO-AIR ( °C/W)
ÎÎÎÎ
Vertically
2.0 oz. Copper
ÎÎÎÎ
80 L 1.6
Minimum
ÎÎÎÎ
70 Size Pad 1.2
L
60
50
ÎÎÎÎ 0.8
0.4
RqJA
40 0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
Figure 25. DPAK Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
http://onsemi.com
10
LM2931, NCV2931 Series
80 3.5
ÎÎÎÎ
Vertically 2.0 oz. Copper
60 2.5
ÎÎÎÎ
L
ÎÎÎÎ
Minimum
50 Size Pad 2.0
L
40
RqJA
ÎÎÎÎ 1.5
30 1.0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
1.6
250
JUNCTION−TO−AIR (°CW)
1.4
2.0 oz. Copper
ÎÎÎ
200 1.2
L
ÎÎÎ
1.0
150
ÎÎÎ
L 0.8
100 0.6
0.4
50 RqJA
0.2
0 0.0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
DEFINITIONS
Dropout Voltage − The input/output voltage differential Maximum Power Dissipation − The maximum total
at which the regulator output no longer maintains regulation device dissipation for which the regulator will operate
against further reductions in input voltage. Measured when within specifications.
the output decreases 100 mV from nominal value at 14 V Bias Current − That part of the input current that is not
input, dropout voltage is affected by junction temperature delivered to the load.
and load current. Output Noise Voltage − The rms AC voltage at the
Line Regulation − The change in output voltage for a output, with constant load and no input ripple, measured
change in the input voltage. The measurement is made under over a specified frequency range.
conditions of low dissipation or by using pulse techniques Long−Term Stability − Output voltage stability under
such that the average chip temperature is not significantly accelerated life test conditions with the maximum rated
affected. voltage listed in the devices electrical characteristics and
Load Regulation − The change in output voltage for a maximum power dissipation.
change in load current at constant chip temperature.
http://onsemi.com
11
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site
and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
http://onsemi.com
12
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
http://onsemi.com
13
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
D2PAK
NCV2931ACD2TR4G* Adjustable "2.5% 800 / VacPk Reel
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site
and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
http://onsemi.com
14
LM2931, NCV2931 Series
MARKING DIAGRAMS
* *
931A5G 2931G LM LM LM
ALYWW ALYWW 2931AD2T−5 2931AD2T−5.0 2931D2T−5
AWLYWWG AWLYWWG AWLYWWG
LM LM
LM LM LM
2931ACD2T 2931CT
2931AT−5 2931T−5.0 2931ACTV
AWLYWWG AWLYWWG
AWLYWWG AWLYWWG AWLYWWG
Heatsink surface connected to Pin 2. Heatsink surface Heatsink surface (shown as terminal 6 in
connected to Pin 3. case outline drawing) is connected to Pin 3.
SOT−223
ST SUFFIX
CASE 318H
* A = Assembly Location
ALYW
WL, L = Wafer Lot
2931AG YY, Y = Year
G WW, W = Work Week
G or G = Pb−Free Device
1 2 3 *This marking diagram also applies to NCV2931.
http://onsemi.com
15
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
12 1
2
3 3
STRAIGHT LEAD BENT LEAD
BULK PACK TAPE & REEL
AMMO PACK
NOTES:
A B STRAIGHT LEAD 1. DIMENSIONING AND TOLERANCING PER ANSI
BULK PACK Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
P BEYOND DIMENSION K MINIMUM.
L
SEATING INCHES MILLIMETERS
PLANE K DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
X X D G 0.045 0.055 1.15 1.39
H 0.095 0.105 2.42 2.66
G J 0.015 0.020 0.39 0.50
H J K 0.500 --- 12.70 ---
L 0.250 --- 6.35 ---
V C N 0.080 0.105 2.04 2.66
P --- 0.100 --- 2.54
SECTION X−X R 0.115 --- 2.93 ---
1 N V 0.135 --- 3.43 ---
NOTES:
A B BENT LEAD
R 1. DIMENSIONING AND TOLERANCING PER
TAPE & REEL ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
AMMO PACK 3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
P AND BEYOND DIMENSION K MINIMUM.
T
MILLIMETERS
SEATING
PLANE K DIM MIN MAX
A 4.45 5.20
B 4.32 5.33
C 3.18 4.19
D 0.40 0.54
X X D G 2.40 2.80
J 0.39 0.50
G K 12.70 ---
J N 2.04 2.66
V P 1.50 4.00
C R 2.93 ---
V 3.43 ---
SECTION X−X
1 N
http://onsemi.com
16
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
4 INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
Q A B 0.380 0.405 9.66 10.28
C 0.160 0.190 4.07 4.82
1 2 3 U D 0.025 0.035 0.64 0.88
H F 0.142 0.147 3.61 3.73
G 0.095 0.105 2.42 2.66
K H 0.110 0.155 2.80 3.93
Z J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
L R Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
V J S 0.020 0.024 0.508 0.61
G T
U
0.235
0.000
0.255
0.050
5.97
0.00
6.47
1.27
D V 0.045 --- 1.15 ---
Z --- 0.080 --- 2.04
N
http://onsemi.com
17
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−220
TH SUFFIX
CASE 314A−03
ISSUE E
NOTES:
B −T− SEATING
1. DIMENSIONING AND TOLERANCING PER ANSI
PLANE
−P− Y14.5M, 1982.
Q 2. CONTROLLING DIMENSION: INCH.
C 3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
E DIMENSION D INCLUDING PROTRUSION SHALL
OPTIONAL NOT EXCEED 0.043 (1.092) MAXIMUM.
CHAMFER
A
U INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.572 0.613 14.529 15.570
F
L K B 0.390 0.415 9.906 10.541
C 0.170 0.180 4.318 4.572
D 0.025 0.038 0.635 0.965
E 0.048 0.055 1.219 1.397
G F 0.570 0.585 14.478 14.859
G 0.067 BSC 1.702 BSC
5X D J 0.015 0.025 0.381 0.635
5X J K 0.730 0.745 18.542 18.923
0.014 (0.356) M T P M L 0.320 0.365 8.128 9.271
S Q 0.140 0.153 3.556 3.886
S 0.210 0.260 5.334 6.604
U 0.468 0.505 11.888 12.827
TO−220
TV SUFFIX
CASE 314B−05
ISSUE L
NOTES:
B C 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
Q −P− OPTIONAL
CHAMFER E 2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 0.043 (1.092) MAXIMUM.
A
U INCHES MILLIMETERS
S L V
DIM MIN MAX MIN MAX
W A 0.572 0.613 14.529 15.570
F B 0.390 0.415 9.906 10.541
K C 0.170 0.180 4.318 4.572
D 0.025 0.038 0.635 0.965
E 0.048 0.055 1.219 1.397
F 0.850 0.935 21.590 23.749
G 0.067 BSC 1.702 BSC
H 0.166 BSC 4.216 BSC
J 0.015 0.025 0.381 0.635
5X J K 0.900 1.100 22.860 27.940
L 0.320 0.365 8.128 9.271
G 0.24 (0.610) M T H N 0.320 BSC 8.128 BSC
5X D Q 0.140 0.153 3.556 3.886
http://onsemi.com
18
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−220 5−LEAD
CASE 314D−04
ISSUE H
−T− SEATING
PLANE NOTES:
B 1. DIMENSIONING AND TOLERANCING PER ANSI
−Q− C Y14.5M, 1982.
B1 DETAIL A-A
E 2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 10.92 (0.043) MAXIMUM.
U A
L INCHES MILLIMETERS
DIM MIN MAX MIN MAX
1234 5
K A 0.572 0.613 14.529 15.570
B 0.390 0.415 9.906 10.541
B1 0.375 0.415 9.525 10.541
C 0.170 0.180 4.318 4.572
D 0.025 0.038 0.635 0.965
E 0.048 0.055 1.219 1.397
J G 0.067 BSC 1.702 BSC
H 0.087 0.112 2.210 2.845
G H J 0.015 0.025 0.381 0.635
D 5 PL K 0.977 1.045 24.810 26.543
L 0.320 0.365 8.128 9.271
0.356 (0.014) M T Q M
Q 0.140 0.153 3.556 3.886
B U 0.105 0.117 2.667 2.972
B1
DETAIL A−A
SOT−223
ST SUFFIX
CASE 318H−01
ISSUE O
NOTES:
H E 0.08 1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
0.2 M C B S PER ASME Y14.5M, 1994.
C 3. DIMENSION E1 DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
S
3 SIDE.
4. DIMENSIONS b AND b2 DO NOT INCLUDE
A e
S
MATERIAL CONDITION.
A 5. TERMINAL NUMBERS ARE SHOWN FOR
M
4 REFERENCE ONLY.
b2 B
0.1
ÉÉÉÉÉÉÉ ÉÉÉ
(b2) (b) b2 2.90 3.10
b3 2.90 3.05
ÉÉÉÉÉÉÉ
ÇÇÇÇÇÇÇ ÉÉÉ
ÇÇÇ
c 0.24 0.35
c1 0.24 0.30
c1 c
T D
E
6.30
6.70
6.70
7.30
b1 E1 3.30 3.70
b3 e 2.30
e1 4.60
SECTION B−B L SECTION A−A L 0.25 ---
T 0_ 10_
http://onsemi.com
19
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
DPAK
DT SUFFIX
CASE 369C−01
ISSUE D
NOTES:
C 1. DIMENSIONING AND TOLERANCING PER ASME
A Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
E A 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-
MENSIONS b3, L3 and Z.
b3 B c2 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
4 5. DIMENSIONS D AND E ARE DETERMINED AT THE
L3 Z OUTERMOST EXTREMES OF THE PLASTIC BODY.
D 6. DATUMS A AND B ARE DETERMINED AT DATUM
DETAIL A H PLANE H.
1 2 3
INCHES MILLIMETERS
DIM MIN MAX MIN MAX
L4 A 0.086 0.094 2.18 2.38
b2 A1 0.000 0.005 0.00 0.13
b c b 0.025 0.035 0.63 0.89
b2 0.030 0.045 0.76 1.14
e 0.005 (0.13) M C H b3 0.180 0.215 4.57 5.46
c 0.018 0.024 0.46 0.61
GAUGE SEATING c2 0.018 0.024 0.46 0.61
L2 PLANE C PLANE D 0.235 0.245 5.97 6.22
E 0.250 0.265 6.35 6.73
e 0.090 BSC 2.29 BSC
H 0.370 0.410 9.40 10.41
L
A1 L 0.055 0.070 1.40 1.78
L1 L1 0.108 REF 2.74 REF
L2 0.020 BSC 0.51 BSC
DETAIL A L3 0.035 0.050 0.89 1.27
ROTATED 905 CW L4 −−− 0.040 −−− 1.01
Z 0.155 −−− 3.93 −−−
SOLDERING FOOTPRINT*
6.20 3.00
0.244 0.118
2.58
0.102
http://onsemi.com
20
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
SOIC−8 NB
CASE 751−07
ISSUE AK
NOTES:
1. DIMENSIONING AND TOLERANCING PER
−X− ANSI Y14.5M, 1982.
A 2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
8 5 PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
B S 0.25 (0.010) M Y M PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
1 IN EXCESS OF THE D DIMENSION AT
4 MAXIMUM MATERIAL CONDITION.
−Y− K 6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
MILLIMETERS INCHES
G
DIM MIN MAX MIN MAX
A 4.80 5.00 0.189 0.197
C N X 45 _ B 3.80 4.00 0.150 0.157
SEATING C 1.35 1.75 0.053 0.069
PLANE D 0.33 0.51 0.013 0.020
−Z− G 1.27 BSC 0.050 BSC
H 0.10 0.25 0.004 0.010
0.10 (0.004) J 0.19 0.25 0.007 0.010
H M J K 0.40 1.27 0.016 0.050
D
M 0_ 8_ 0 _ 8 _
N 0.25 0.50 0.010 0.020
S 5.80 6.20 0.228 0.244
0.25 (0.010) M Z Y S X S SOLDERING FOOTPRINT*
1.52
0.060
7.0 4.0
0.275 0.155
0.6 1.270
0.024 0.050
http://onsemi.com
21
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936−03
ISSUE D
NOTES:
T T 1. DIMENSIONING AND TOLERANCING PER ANSI
TERMINAL 4 Y14.5M, 1982.
C C
K A U
2. CONTROLLING DIMENSION: INCHES.
OPTIONAL ED OPTIONAL ES 3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS
A AND K.
CHAMFER CHAMFER
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
S MOUNTING SURFACE FOR TERMINAL 4.
V 5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
B FLASH OR GATE PROTRUSIONS. MOLD FLASH
H DETAIL C DETAIL C AND GATE PROTRUSIONS NOT TO EXCEED
1 2 3 0.025 (0.635) MAXIMUM.
6. SINGLE GAUGE DESIGN WILL BE SHIPPED
AFTER FPCN EXPIRATION IN OCTOBER 2011.
J INCHES MILLIMETERS
F SIDE VIEW BOTTOM VIEW SIDE VIEW DIM MIN MAX MIN MAX
DUAL GAUGE SINGLE GAUGE A 0.386 0.403 9.804 10.236
G CONSTRUCTION CONSTRUCTION B 0.356 0.368 9.042 9.347
2X D C 0.170 0.180 4.318 4.572
SOLDERING FOOTPRINT*
10.490
8.380
16.155
2X
3.504
2X 1.016
5.080
PITCH DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
22
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936A−02
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
−T− TERMINAL 6 2. CONTROLLING DIMENSION: INCH.
OPTIONAL 3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS A
A CHAMFER E U AND K.
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 6.
K S 5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
V FLASH OR GATE PROTRUSIONS. MOLD FLASH
B AND GATE PROTRUSIONS NOT TO EXCEED 0.025
H (0.635) MAXIMUM.
1 2 3 4 5
M INCHES MILLIMETERS
L DIM MIN MAX MIN MAX
A 0.386 0.403 9.804 10.236
D B 0.356 0.368 9.042 9.347
N P C 0.170 0.180 4.318 4.572
0.010 (0.254) M T D 0.026 0.036 0.660 0.914
G R E 0.045 0.055 1.143 1.397
G 0.067 BSC 1.702 BSC
H 0.539 0.579 13.691 14.707
K 0.050 REF 1.270 REF
L 0.000 0.010 0.000 0.254
M 0.088 0.102 2.235 2.591
N 0.018 0.026 0.457 0.660
C
P 0.058 0.078 1.473 1.981
R 5 _ REF 5 _ REF
S 0.116 REF 2.946 REF
SOLDERING FOOTPRINT* U 0.200 MIN 5.080 MIN
V 0.250 MIN 6.350 MIN
8.38
0.33
1.702
0.067
10.66
0.42
1.016
3.05 0.04
0.12
16.02
0.63
SCALE 3:1 ǒinches
mm Ǔ
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com LM2931/D
23
Mouser Electronics
Authorized Distributor
ON Semiconductor:
NCV2931ACDR2 NCV2931AD-5.0R2 NCV2931AD-5.0R2G NCV2931AST-5.0T3 NCV2931AST-5T3G
NCV2931CDR2 NCV2931CDR2G NCV2931D2T-5.0R4 NCV2931D2T5.0R4G NCV2931D-5.0R2 NCV2931D-
5.0R2G NCV2931DT-5.0RK NCV2931DT-5.0RKG LM2931ACD LM2931ACD2TR4 LM2931ACD2TR4G
LM2931ACDG LM2931ACDR2 LM2931ACDR2G LM2931ACTV LM2931ACTVG LM2931AD2T-5.0 LM2931AD2T-
5.0G LM2931AD2T-5.0R4 LM2931AD2T-5R4G LM2931AD-5.0 LM2931AD-5.0G LM2931AD-5.0R2 LM2931AD-
5.0R2G LM2931ADT-5.0 LM2931ADT-5.0G LM2931ADT-5.0RK LM2931ADT-5.0RKG LM2931AT-5.0 LM2931AT-
5.0G LM2931AZ-5.0 LM2931AZ-5.0G LM2931AZ-5.0RA LM2931AZ-5.0RAG LM2931AZ-5.0RP LM2931AZ-5.0RPG
LM2931CD LM2931CD2T LM2931CD2TG LM2931CD2TR4 LM2931CD2TR4G LM2931CDG LM2931CDR2
LM2931CDR2G LM2931CT LM2931CTG LM2931D2T-5.0 LM2931D2T-5.0G LM2931D2T-5.0R4 LM2931D2T-
5.0R4G LM2931D-5.0 LM2931D-5.0G LM2931D-5.0R2 LM2931D-5.0R2G LM2931DT-5.0 LM2931DT-5.0G
LM2931T-5.0 LM2931T-5.0G LM2931Z-5.0 LM2931Z-5.0G LM2931Z-5.0RA LM2931Z-5.0RAG LM2931Z-5.0RP
LM2931Z-5.0RPG NCV2931ACDR2G NCV2931AZ-5.0RAG NCV2931AZ-5.0G NCV2931ADT5.0RKG
NCV2931ACD2TR4G