This welding procedure specification outlines the parameters for gas tungsten arc welding (GTAW) of stainless steel to carbon steel materials. The WPS specifies: (1) an argon shielding gas at a flow rate of 6-12 L/min, (2) butt, single-V, and fillet joint designs, (3) ER-309 filler metal, (4) a root opening and face as needed, (5) AC or DC electrode polarity, (6) a current range of 70-200 amps and voltage of 18-35 volts depending on the pass, and (7) a travel speed of 10-20 cm
This welding procedure specification outlines the parameters for gas tungsten arc welding (GTAW) of stainless steel to carbon steel materials. The WPS specifies: (1) an argon shielding gas at a flow rate of 6-12 L/min, (2) butt, single-V, and fillet joint designs, (3) ER-309 filler metal, (4) a root opening and face as needed, (5) AC or DC electrode polarity, (6) a current range of 70-200 amps and voltage of 18-35 volts depending on the pass, and (7) a travel speed of 10-20 cm
This welding procedure specification outlines the parameters for gas tungsten arc welding (GTAW) of stainless steel to carbon steel materials. The WPS specifies: (1) an argon shielding gas at a flow rate of 6-12 L/min, (2) butt, single-V, and fillet joint designs, (3) ER-309 filler metal, (4) a root opening and face as needed, (5) AC or DC electrode polarity, (6) a current range of 70-200 amps and voltage of 18-35 volts depending on the pass, and (7) a travel speed of 10-20 cm
QW402:Joint Desighn Type: BW SW Fillet Type of Weld: Single Double QW-409:Electrical Characterist Root Opening: Root Face: Groove Angle Transfer Mode(GMAW): Short-Circuiting Glubular Spray Current:AC DCEN DCEP Other:
Tangestan Electrode(GTAW): SFA5.12
QW403: Base Metal Size:1.6mm
[P,S] no:8 Group No:1 To [P,S] no:1 Group No 2 Type:ETWH
Material Spec:TP316,304, F316,304,WP316,304,TYPE316,304 TO QW410:Technique
API 5L(All Grad),A106,A105,A183,A516,A333(1,6,10), A515 Stringer or Weave Bead:Both ,A537,A36,ST37,WPB,WPC,A179,A178,LF2,F52,WPHY52 Multi - Pass or Single Pass(per side) both Diametere For pipe: All Thickness:THK:All Number Of Electrodes: 1 QW-404:Filler Metal Dia< 6mm Electrode Spacing:NA Specification: SFA5.9 A NO 8 Contact Tube To Worke Distance:12-14mm Classificatin:ER-309 F NO:8 Interpass Cleaning:Grinding , Brushing
QW405:Position QW-407:PWHT Temp:
position of Groove:All Fillet:All Temp:NR Vertical Progression: Up Down Holding Time:NR
QW-406:Preheat Heating Rate:NR
Preheat Temp: Min:NA Cooling Rate:NR Interpass Temp: Min: Max:200 C
Pass or Weld Layer polarity Amp Volt Filler metal Proc. TV(cm/min)
1 DCEN 70-110 18-22 ER-309 Dia =2.5mm GTAW 10-20
2 DCEN 110-170 20-30 ER-309 Dia =3.2mm SMAW 10-20 n DCEN 150-200 25-35 ER-309 Dia =3.2mm SMAW 10-20