Special Fasteners for Engineers
r
DIN 876 DIN 877
DIN 875, for one-sided lack of for too large
for offset holes space for fastener head sunk holes
bine | DIN 880
binocular-shaped
DIN 878 for wrong-sided fastener for
for sloped holes sunk holes double-drilled
holes
ue
A
DIN 881 DIN 882 DIN 883
‘mounting screw for ‘mounting screw for too special screw for mounting time
too large holes ‘deep sunk holes reduction
a
ss {
telescopic screw if
doubts about the for changing angular deviation for peer sacs 13, an 19
length exist defectsSpecial Fasteners for Engineers
$
DIN 888,
according to DIN 887 but also
for imperial threads and seldom
intermediate sizes (M8.7)
sizes 12-17
2
oS
i
DIN 889
for open and
hex. spanners.
ao
DIN 890 DIN 891
wing - hex - ‘magnetic screw head for fant atinilaioa af sore)
slotted - socket -torx = fast simulation of screw joints even from behind
Philips - screw joints
i
DIN 893, DIN 895
special screw with DIN 894
‘emergency blasting,
oone-way-serew
sweep-out-screw
for cleaning bore
preparation (atcheteffect screw) holes
pull-off for double sided scotch-tape]__pull-off for double sided scotch-tape
DIN 896
self-adhesive head for a DIN ior DIN 898, i
ick simulation of a joint drive-in-serew
t : according to DIN 896 fr an
for all non-ferrous materials
also for back sidesSpecial Fasteners for Engineers
3
=
=
Wing-cork-serew
DIN 900
‘Torsion-screw
DIN 902
Burling screw (M10)
for blind colleagues
DIN 903
drill-sink-cut-thread-screw
Schraubenkopf auswechselbar
__—
i
DIN 906
bbesl rey zoom-cheat- =
fcrew DIN 905 sew or
twin fastener simulating
fii joints
data
DIN 908 DIN 909
a gear sre (only wee wed cpa ew
with gear spanner)
with fitin key as
turn-off safeguard