Professional Documents
Culture Documents
Paper Mid Sem - Reregistration PDF
Paper Mid Sem - Reregistration PDF
Fig. 1
2. Draw the stress-strain diagram for mild steel and explain the salient points? 4
Fig. 2
4. The elastic portion of the stress–strain 8
diagram for a steel alloy is shown in the Fig.
3. The specimen from which it was obtained
had an original diameter of 13 mm and a
gauge length of 50 mm. When the applied
load on the specimen is 50 kN, the diameter is
12.99265 mm. Determine Poisson’s ratio for
the material.
Fig. 3