Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DATASHEET

R250 AVR
FOR SHUNT ALTERNATORS

CHARACTERISTICS

••Voltage regulation : ± 0.5 %.


••U/F function.
••LAM function.
••Quick response : 500 ms.
••Nominal excitation current : 5A.
••Maximum excitation current :
7A during 10 s.

••Supply range / voltage detection :


85 to 139 V (50/60Hz).
R250 is an analog AVR with power controled by transistors. It is designed for small ••Protection : fuse 8A.
alternators with a SHUNT excitation.

R250 controls the excitation current in order to maintain the output voltage of
the alternator. R250 is performant in terms of voltage regulation, simple to set,
to use and is reliable.

It is in compliance with I.E.C. 60034-1 standard and U.L. 508 / C.S.A. approved.

OPERATION RANGE

LSA 40 42,3 44,3 46,3 47,2 49,3 50,2 51,2 53,1 54

SHUNT - - - - -

AREP - - - - - - - - - -

PMG - - - - - - - - - -

Operation mode : Standalone

ANALOG AVR R25 0 - REF. 45 4 8 en-2017.11/e www.leroy-somer.com/epg


MAIN FEATURE OPERATION CONDITIONS

U/F FUNCTION ••Operating temperature range : ••Vibrations : less than 10 Hz ,


- 40° C to + 65° C. 2 mm peak magnitude.
Voltage Knee 57 Hz
60 Hz •• Storage temperature range : ••From 10 Hz to 100 Hz : 100 mm/s,
Knee - 55° C to + 85° C. below 100 Hz : 8g.
48 Hz
100 %
U/UN 50 Hz
••Hygrometry : 98%.
••Maximum choc : 9 g on 3 axis.
Frequency
50 Hz 60 Hz Hz

LAM FUNCTION

Transient voltage drop


UN Max. speed drop with
LAM
fN LAM

the shaft (kW)


0,9

Load on
(U/f) 0,9 Variation in the load
without LAM without
0,8 with LAM LAM Load shedding due to LAM
Time 0,8 Time Time

0 1s 2s 3s 0 1s 2s 3s
0 1s 2s 3s

CONNEXION AND SETTING 75 mm 4 x holes Ø 5.8 x


50 x 115 mm

Settings are done through the AVR.


110 0V E+ E- R250
140 mm

••Potentiometer P1 : voltage setting.


••Potentiometer P2 : stability setting.
••Strap ST3 : frequency selection.
••Jumper : frequency, U/F function, F1
FREQ. & L.A.M. CONFIG.

LAM function Slow fuse


250V 8 A
••Potentiometer ST4 : remote voltage
setting.
P1
STAB VOLT

Voltage 47.5Hz
KNEE
KNEE
50Hz
50Hz LAM
LAM
47.5Hz
LAM OFF
LAM OFF 99
oo OFF
OFF
11 13%
13%
99 00 11

P2
SPECIAL
SPECIAL
88 22 25%
25%
78

2
23
8

KNEE
KNEE
OFF
7

33
3

OFF
65Hz 77
456
65Hz
LAM OFF
LAM OFF 44 13%
13%
Stability KNEE
KNEE 66
55 25%
25%
57Hz
57Hz
60Hz
60Hz LAM
LAM
LAM OFF
LAM OFF

ST4
Option
External
potentiometer Frequency selector
for voltage adjusting 50 Hz / 60 Hz , U/F function
and LAM function

© Nidec 2017. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed as Nidec have an ongoing process of
development and reserve the right to change the specification of their products without notice.

You might also like