Professional Documents
Culture Documents
Product Guide: Rough Terrain Hydraulic Crane
Product Guide: Rough Terrain Hydraulic Crane
Product Guide: Rough Terrain Hydraulic Crane
Product Guide
Features
n
MAX. CAPACITY (Outriggers) - 55.0 Tonnes at n
BOOM - 4 Section Trapezoidal 10.8m - 33.5m
3m Radius (85% Rating) 360° Slew n
MAXIMUM ROAD SPEED - 35 km/hr
n
MAX. CAPACITY (On Tyres) - 29.45 Tonnes at n
CARRIER - 4 X 4 Wheel Drive with 4 Wheel Steer
3m Radius (85% Rating) over front
Superstructure Specification
No. of fall 10 9 8 7 6 5 4 3 2 1
Permissible Load 55.0 48.0 40.0 34.0 28.0 23.0 18.0 14.0 10.0 5.0
3. Capacities appearing above the bold line are based on WARNING: Operation of this machine with heavier load
structural strength and tipping should not be relied than the capacities listed is strictly prohibited. Machine
upon as a capacity limitation. tipping occurs without advance warning.
On Rubber (Pick & Carry Capacities - upto 4.0 km/hr Boom Centered Over Front)
Tyre Pr. 5.3 kg/cm2
Radius
(in Main Boom Length (in Meters)
Meters)
10.4 12.2 13.7 16.8 19.8 22.9 25.6
3 24,900
3.5 21,750
4 20,300
4.5 18,500 12,400 12,400
5 17,000 12,000 11,500
6 14,650 10,850 9,400 9,250
7 12,650 9,350 7,850 7,850 7,000 7,000
8 10,300 8,900 7,350 6,600 6,500 6,300
9 8300 7,350 5,600 5,400 5,000
10 6,750 6,750 5,400 4,700 4,150 3,750
12 5,000 3,750 3,150 3,150
14 3,500 3,200 2,600 2,600
16 2,600 2,300 2,200
RT 760
18 1,900 1,900
20 1,350 1,350
22 950
On Outriggers - 360°
Boom Angle 5° Offset 17° Offset 30° Offset
Note: When lifting over swingaway and / or jib combinations, deduct total
RT 760
weight of all load handling devices reeved over main boom nose directly from
swingaway or jib capacity.
No. of fall 10 9 8 7 6 5 4 3 2 1
Permissible Load 55.0 48.0 40.0 34.0 28.0 23.0 18.0 14.0 10.0 5.0
55,000 40,820
3
(65) (68.5)
46,175 40,820
3.5
(62) (66)
42,135 39,870 37,190 32,790 28,960
4
(59) (63) (66.5) (71.5) (75)
38,370 38,370 37,190 31,090 27,010
4.5
(56) (60.5) (64.5) (69.5) (73.5)
35,060 35,060 35,060 29,230 25,310
5
(52.5) (57.5) (62) (68) (72)
29,640 29,640 29,640 25,580 22,475 19,500 17,845
6
(45.5) (52) (57) (64) (69) (72) (75)
24,830 24,830 24,830 23,040 19,795 17,345 16,100 12,290
7
(37) (45.5) (51.5) (60) (65.5) (69.5) (72.5) (76)
21,135 21,135 21,135 20,815 17,530 15,510 14,310 11,860
8
(26.5) (38) (46) (56) (62.5) (67) (70) (75.5)
18,325 18,325 18,325 15,785 14,240 12,790 10,770
9
(29.5) (40) (51.5) (59) (64) (68) (74)
15,965 15,965 15,965 14,330 12,900 11,540 9,865
10
(17) (32.5) (47) (55.5) (61) (65.5) (72)
12,080 11,900 10,680 9,615 8,435
12
(36.5) (48) (55) (60.5) (68.5)
8,890 8,890 8,890 8,095 7,300
14
(21.5) (39) (48.5) (55) (64.5)
7,020 7,010 6,900 6,330
16
(28) (41) (49) (60.5)
5,750 5,750 5,510
18
(32.5) (42.5) (56.5)
4,690 4,700 4,830
20
(20) (35) (52)
3,700 4,150
22
(26) (47.5)
3,500
24
(42.5)
2,940
26
(37)
2,680
28
(30)
2,160
30
(21.5)
Minimum boom angle (deg.) for indicated length (no load) 0 0
RT 760
Minimum boom length (m.) at 0 deg. boom angle (no load) 25.9 33.5
45° 30.0 1,830 30.8 1,695 31.5 1,610 33.2 1,625 35.2 1,475 35.5 1,385 36.2 1,455 38.0 1,295 39.4 1,210
1
If 2 parts of line are used, the capacity increases to 4,625 kg.
2
If 2 parts of line are used, the capacity increases to 3,810 kg.
On Rubber (Stationary Capacities - 360°) On Rubber (Stationary - Defined Arc Over Front)
2,450
16
(28)
1,600
18
(32.5)
1,000
20
(20)
RT 760
8,800 6,600 6,600 6,600 6,600 7. Tyres shall be inflated to the recommended pressure before
9 lifting on rubber. Capacities must be reduced for lower tyre
(29.5) (40) (51.5) (59) (64)
inflation. Damaged tyre is hazardous for safe operation of
7,100 5,650 5,650 5,650 5,650 crane.
10
(17) (32.5) (47) (55.5) (61)
8. For outrigger operation, all outriggers shall be fully extended
5,060 4,200 4,200 with tires raised free of ground before raising the boom or
12
(36.5) (48) (55) lifting loads.
9. Unless otherwise stated, capacities are with powered boom
3,500 3,150 3,150
14 sections equally extended.
(21.5) (39) (48.5)
10. Defined Arc ± 6° on either side of longitudinal centerline of
2,400 2,300 machine.
16
(28) (41)
11. With tele boom extension in working position and main
1,600 boom length greater than 29.3m boom angle must not
18
(32.5) be less than 30°, since loss of stability will occur causing a
tipping condition.
1,000
20 12. For Pick & Carry operation, boom must be centered over
(20)
front of machine, mechanical swing lock engaged and
Note : ( ) Boom angles are in degrees. load restrained from swinging. When handling loads in the
structural range with capacities close to maximum rating,
travel should be reduced to creep speeds (not over 61m of
movement in 30 min, not exceeding 1.6 Km/hr).
13. Axle lockouts must be functioning before lifting on rubber.
14. The maximum load which can be telescoped is not definable
because of variations in loading and crane maintenance, but
it is safe to attempt retraction and extension within the limits
RT 760
On Outriggers - 360 °
On Rubber Pick & Carry Capacities Upto 4.0 km/hr Boom Centered Over Front
Tyre Inflation Pr. 5.3 kg/cm2
Boom
Angle Main Boom Length (in Meters)
10.8 12.2 13.7 16.8 19.8 22.9
8,940 6,640 5,195 3,170 1,800 900
0°
(9.0) (10.4) (12.0) (15.0) (18.1) (21.1)
FRAME TYRES
High strength alloy steel welded box section with 29.5 X 25 X 28 PR – E3 Tread earthmover tyres.
integral outrigger housings and front / rear lifting,
towing and tie down lugs. BRAKES
Dual braking system, full hydraulic operating on all
OUTRIGGER SYSTEM wheels. Spring applied, hydraulically released parking
4 hydraulically telescoping beams with jacks having brake operating on front axle.
integral holding valves, positioned 2 nos. in each
outrigger housing. Provides steel fabricated quick HYDRAULIC SYSTEM
release type outrigger float for each jack . Pumps : 3-Section Gear pump & Single section Gear
pump are driven through transmission PTO.
OUTRIGGER CONTROLS One Gear pump driven through engine PTO.
Independent control of each outrigger beam located Filters : Return line filter with replaceable cartridge
in cab on front dash panel along with level indicator. having full flow with by-pass protection and service
ENGINE indicator.
Volvo TAD850VE Reservoir : 583 liters with spin-on breather filter,
160 kW @ 2200 RPM external sight gauge, oil level & temperature gauge,
Max torque -1060 Nm @ 1350 RPM clean out access.
Emission - BSIII CEV Oil cooler : Remote mounted with thermostatically
controlled through 2 nos. electric motor driven fan.
FUEL TANK
Capacity 227 liters. MAXIMUM SPEED
35 kmph.
ELECTRICAL SYSTEM
Two 12 Volt-batteries, 24 Volt lighting equipment GRADEABILITY
including two headlights, side, tail and stop lights and 45% ( Maximum )
flashing direction indicators. GROSS VEHICLE WEIGHT AND AXLE LOADS
DRIVE (approx)
4x4 / 4x2 Front : 20,777 kgs
Rear : 20,448 kgs
STEERING GVW : 41,225 kgs
Fully independent power steering :
Front : Full hydraulic controlled by steering wheel. Optional Weights (approx.)
Rear : Full hydraulic selector switch controlled. Fixed Lattice : 1000 kg
Provides infinite variations of 4 main steering modes – Tele lattice : 1300 kg
front only, rear only, crab and coordinated. Auxiliary Hoist : 700 kg
Provides rear wheel steer indicator.
Steering Reversal : Provided to have same MISCELLANEOUS STANDARD EQUIPMENT
conventional steering control effect, irrespective of Full width steel fenders, rear view mirror, back-up
super position with respect to carrier. alarm, front stowage well, tool kit.
OSCILLATION LOCKOUTS
Automatic full hydraulic lockouts on rear axle permits
oscillation only with boom centered over front.
Lattice (Optional)
Auxiliary
Boom Nose (Optional) Auxiliary Hoist
(Optional)
Lattice (Optional)
Dimensions in mm
Outrigger Span Turning Radius: Clearance circle radius only Boom Boom with lattice
Lateral: 7010 mm 2 wheel steer: 11786 mm 2 Wheel steer: 14173 mm 2 Wheel steer: 14783 mm
Longitudinal: 6985 mm 4 wheel steer: 6743 mm 4 Wheel steer: 9957 mm 4 Wheel steer: 10465 mm
RT 760
Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. The
photographs/drawings in this document are just for Illustrative purpose which may include optional items and accessories, which can be provided at an
additional cost on request.
CHENNAI
TIL Limited
Jhaver Plaza, 7th Floor 1-A
Nungambakkam High Road
Chennai 600 034, Tamil Nadu
Phone: +91 044 6670 3000 / 3010
Fax: +91 44 2827 9681
Email: chennai.til@tilindia.com
DELHI NCR
Plot 11, Site No.IV
Sahibabad Industrial Area
Ghaziabad 201 010 U.P.
Phone: +91 120 277 8735 / 8736 / 7468
Fax: +91 120 277 7467
Email: MHGMarketing.Sahibabad@tilindia.com | mhscs.Sahibabad@tilindia.com
DELHI
TIL Limited
302 Ansal Bhawan
16, Kasturba Gandhi Marg, New Delhi 110 001
Phone: +91 11 2331 1607 / 8046 / 9248 | 2335 0250 / 0255
Fax: +91 11 2331 3263
Email: til.delhi@tilindia.com
KAMARHATTY
TIL Limited
517, Barrackpore Trunk Road
Kolkata 700 058
Phone: +91 33 2553 1352 / 1882 | 6633 4000
Fax: +91 33 2553 2546 / 5971
Email: MktDept.KMT@tilindia.com | til.kmt@tilindia.com
KHARAGPUR
TIL Limited
Vill. & P.O. Changual, Kharagpur
Dist: Paschim Medinipur 721 301, West Bengal
Phone: +91 32 2266 1101 TIL has a pan-India network of offices with service
MUMBAI engineers located in the close proximity of jobsites.
TIL Limited
502 - A, 5th Floor, Western Edge Tower No.1
Western Express Highway, Datta Pada Road
Borivali (East), Mumbai 400 066, Maharashtra
Toll Free No: 1800 266 1535
Tel: 91 022 6147 9159 / 9135 / 9143 / 9133 / 9137
Mobile: +91 90043 88002 | 99301 11962 | 98926 79925 | 88509 71609
www.tilindia.in
Fax: 91 22 6147 9111
Email: Mumbai.TIL@tilindia.com | Mumbai.Custsupp@tilindia.com
Technical Specification TIL/RT 760/0818. This cancels Technical Specofication TIL/RT 760/1117
This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment,
and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.
Copyright © 2017 TIL Limited. All Rights Reserved