Professional Documents
Culture Documents
5 6086791694424998681
5 6086791694424998681
5 6086791694424998681
ISO 6072 2011.12.01 English Rubber - Compatibility between hydraulic fluids and standa
ISO 14496-5 AMD 26 2011.12.01 English Information technology - Coding of audio-visual objects - Pa
ISO 14496-5 AMD 30 2011.12.01 English Information technology - Coding of audio-visual objects Par
ISO 14496-27 AMD 3 2011.12.01 English Information technology - Coding of audio-visual objects - Pa
ISO 10118-3 CORR 1 2011.12.01 English Information technology - Security techniques - Hash-functio
ISO 11148-10 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO 13706 2011.12.01 English Petroleum, petrochemical and natural gas industries - Air-co
ISO 6469-3 2011.12.01 English Electrically propelled road vehicles - Safety specifications - P
ISO 11148-8 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO 11148-1 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO TS 80004-4 2011.12.01 English Nanotechnologies - Vocabulary - Part 4: Nanostructured ma
ISO TS 80004-5 2011.12.01 English, Fr Nanotechnologies - Vocabulary - Part 5: Nano/bio interface
ISO 3384-1 2011.12.01 English Rubber, vulcanized or thermoplastic - Determination of stre
ISO 20344 2011.12.01 English Personal protective equipment - Test methods for footwear
ISO 1133-2 2011.12.01 English Plastics - Determination of the melt mass-flow rate (MFR) a
ISO 11783-4 2011.12.01 English Tractors and machinery for agriculture and forestry - Serial
ISO 11148-9 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO 11148-11 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO 11148-2 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO 11148-5 2011.12.01 English Hand-held non-electric power tools - Safety requirements -
ISO TS 10272-3 CORR 1 2011.12.01 English Microbiology of food and animal feeding stuffs - Horizontal
ISO 10118-2 CORR 1 2011.12.01 English Information technology - Security techniques - Hash-functio
ISO 14496-16 AMD 1 2011.12.01 English Information technology - Coding of audio-visual objects - Pa
ISO 1133-1 2011.12.01 English Plastics - Determination of the melt mass-flow rate (MFR) a
ISO 18013-3 CORR 1 2011.12.01 English Information technology - Personal identification - ISO-comp
ISO 18013-2 CORR 1 2011.12.01 English Information technology - Personal identification - ISO-comp
ISO 8535-1 2011.12.01 English Diesel engines - Steel tubes for high-pressure fuel injection
ISO 10803 2011.12.01 English Design method for ductile iron pipes
ISO 11806-2 2011.12.01 English Agricultural and forestry machinery - Safety requirements a
ISO 19757-8 CORR 1 2011.12.01 English Information technology - Document Schema Definition Lan
ISO 10243 AMD 1 2011.12.01 English Tools for pressing - Compression springs with rectangular se
ISO 16589-2 2011.12.01 English, Fr Rotary shaft lip-type seals incorporating thermoplastic seali
ISO 3342 2011.12.01 English Textile glass - Mats - Determination of tensile breaking force
ISO 14405-2 2011.12.01 English Geometrical product specifications (GPS) - Dimensional tole
ISO 8082-2 2011.12.01 English Self-propelled machinery for forestry - Laboratory tests and
ISO 14405-2 2011.12.01 French Spécification géométrique des produits (GPS) - Tolé
ISO 19901-6 CORR 1 2011.12.01 English Petroleum and natural gas industries - Specific requirement
ISO 11806-1 2011.12.01 English Agricultural and forestry machinery - Safety requirements a
ISO 11680-2 2011.12.01 English Machinery for forestry - Safety requirements and testing for
ISO TR 24725-1 2011.12.01 English ITLET supportive technology and specification integration -
ISO 42010 2011.12.01 English Systems and software engineering - Architecture descriptio
ISO 11681-2 2011.12.01 English Machinery for forestry - Portable chain-saw safety requirem
ISO 17417 2011.12.01 English Information technology - Telecommunications and informati
ISO 16000-18 CORR 1 2011.12.01 English Indoor air - Part 18: Detection and enumeration of moulds
ISO 10784-1 2011.12.01 English Space systems - Early operations - Part 1: Spacecraft initializ
ISO 10784-3 2011.12.01 English Space systems - Early operations - Part 3: Commissioning re
ISO 29148 2011.12.01 English Systems and software engineering - Life cycle processes - Re
ISO 4317 2011.12.01 English Surface-active agents and detergents - Determination of wa
ISO 8332 2011.12.01 English Rubber compounding ingredients - Sulfur - Methods of test
ISO 14143-1 CORR 1 2011.12.01 English Information technology - Software measurement - Function
ISO 1133-1 2011.12.01 French Plastiques - Détermination de l’indice de fluidité Ã
ISO 10619-1 2011.12.01 English Rubber and plastics hoses and tubing - Measurement of fle
ISO 16512-2 2011.12.01 English Information technology - Relayed multicast protocol: Specifi
ISO 26515 2011.12.01 English Systems and software engineering - Developing user docum
ISO 17203 2011.12.01 English Information technology - Open Virtualization Format (OVF)
ISO 25539-3 2011.12.01 English Cardiovascular implants - Endovascular devices - Part 3: Ven
ISO 11681-1 2011.12.01 English Machinery for forestry - Portable chain-saw safety requirem
ISO 26511 2011.12.01 English Systems and software engineering - Requirements for mana
ISO TR 11581-1 2011.12.01 English Information technology - User interface icons - Part 1: Intro
ISO 9364 2011.12.01 English Continuous hot-dip 55 % aluminium/zinc alloy-coated steel
ISO 11680-1 2011.12.01 English Machinery for forestry - Safety requirements and testing for
ISO 1407 2011.12.01 English Rubber - Determination of solvent extract
ISO 16000-4 2011.12.01 English Indoor air - Part 4: Determination of formaldehyde - Diffusiv
ISO 27006 2011.12.01 English Information technology - Security techniques - Requiremen
ISO 15149 2011.12.01 English Information technology - Telecommunications and informati
ISO 16000-6 2011.12.01 English Indoor air - Part 6: Determination of volatile organic compo
ISO 29155-1 2011.12.01 English Systems and software engineering - Information technology
ISO 23640 2011.12.01 English In vitro diagnostic medical devices - Evaluation of stability o
ISO 8287 2011.12.01 English Magnesium and magnesium alloys - Unalloyed magnesium
ISO 16000-18 CORR 1 2011.12.01 French Air intérieur - Partie 18: Détection et dénombrement
ISO 18941 2011.12.01 English Imaging materials - Colour reflection prints - Test method fo
ISO 11148-2 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO 25539-3 2011.12.01 French Implants cardiovasculaires - Dispositifs endovasculaires - Pa
ISO 3384-1 2011.12.01 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 14719 2011.12.01 French Analyse chimique de matériaux réfractaires, du verre e
ISO 10784-2 2011.12.01 English Space systems - Early operations - Part 2: Initialization plan
ISO 18186 2011.12.01 English Freight containers - RFID cargo shipment tag system
ISO 4317 2011.12.01 French Agents de surface et détergents - Détermination de la t
ISO 16243 2011.12.01 English Surface chemical analysis - Recording and reporting data in
ISO 6469-3 2011.12.01 French Véhicules routiers électriques - Spécifications de sé
ISO TS 10272-3 CORR 1 2011.12.01 French Microbiologie des aliments - Méthode horizontale pour la
ISO 16243 2011.12.01 French Analyse chimique des surfaces - Enregistrement et notificati
ISO 11806-1 2011.12.01 French Matériel agricole et forestier - Exigences de sécurité
ISO 11148-9 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO 10619-3 2011.12.01 French Tuyaux et tubes en caoutchouc et en plastique - Mesurage
ISO 2559 2011.12.01 English Textile glass - Mats (made from chopped or continuous stra
ISO 13613 2011.12.01 English Ships and marine technology - Maintenance and testing to
ISO 11681-2 2011.12.01 French Matériel forestier - Exigences de sécurité et essais de
ISO 14719 2011.12.01 English Chemical analysis of refractory material glass and glazes - D
ISO 11806-2 2011.12.01 French Matériel agricole et forestier - Exigences de sécurité
ISO 20344 2011.12.01 French Équipement de protection individuelle - Méthodes dâ€
ISO 26300 CORR 2 2011.12.01 English Information technology - Open Document Format for Office
ISO 15081 2011.12.01 English Agricultural equipment - Graphical symbols for pressurized
ISO 11783-4 2011.12.01 French Tracteurs et matériels agricoles et forestiers - Réseaux
ISO 8332 2011.12.01 French Ingrédients de mélange du caoutchouc - Soufre - Mé
ISO 13289 2011.12.01 English Recreational diving services - Requirements for the conduct
ISO 10619-1 2011.12.01 French Tuyaux et tubes en caoutchouc et en plastique - Mesurage
ISO 11148-5 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO 23640 2011.12.01 French Dispositifs médicaux de diagnostic in vitro - Évaluation
ISO 1133-2 2011.12.01 French Plastiques - Détermination de l’indice de fluidité Ã
ISO 10619-2 2011.12.01 French Tuyaux et tubes en caoutchouc et en plastique - Mesurage
ISO 1407 2011.12.01 French Caoutchouc - Détermination de l’extrait par les solvan
ISO 11148-1 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO 8082-2 2011.12.01 French Machines forestières automotrices - Essais de laboratoire
ISO HL7 27953-1 2011.12.01 English Health informatics - Individual case safety reports (ICSRs) in
ISO 16242 2011.12.01 French Analyse chimique des surfaces - Enregistrement et notificati
ISO HL7 27953-2 2011.12.01 English Health informatics - Individual case safety reports (ICSRs) in
ISO 10243 AMD 1 2011.12.01 French Outillage de presse - Ressorts de compression à section rec
ISO 16000-4 2011.12.01 French Air intérieur - Partie 4: Dosage du formaldéhyde - Mé
ISO 11148-10 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO TS 23768-1 2011.12.01 French Roulements - Bibliothèque de composants - Partie 1: Dicti
ISO TS 80004-4 2011.12.01 French Nanotechnologies - Vocabulaire - Partie 4: Matériaux nan
ISO 6072 2011.12.01 French Caoutchouc - Compatibilité des fluides hydrauliques avec
ISO 23611-5 2011.12.01 French Qualité du sol - Prélèvement des invertébrés du s
ISO 14470 2011.12.01 French Ionisation des aliments - Exigences pour l’élaboration
ISO TS 11133-2 AMD 1 2011.12.01 French Microbiologie des aliments - Guide pour la préparation e
ISO 11148-8 2011.12.01 French Machines portatives à moteur non électrique - Exigence
ISO 11681-1 2011.12.01 French Matériel forestier - Exigences de sécurité et essais de
ISO 11680-2 2011.12.01 French Matériel forestier - Exigences de sécurité et essais po
ISO 11680-1 2011.12.01 French Matériel forestier - Exigences de sécurité et essais po
ISO 16000-6 2011.12.01 French Air intérieur - Partie 6: Dosage des composés organiqu
ISO 12670 2011.12.01 English Thermal spraying - Components with thermally sprayed coa
ISO 10619-2 2011.12.01 English Rubber and plastics hoses and tubing - Measurement of fle
ISO 28278-1 2011.12.01 English Glass in building - Glass products for structural sealant glazi
ISO 16242 2011.12.01 English Surface chemical analysis - Recording and reporting data in
ISO 10619-3 2011.12.01 English Rubber and plastics hoses and tubing - Measurement of fle
ISO 10579 CORR 1 2011.12.01 French Spécification géométrique des produits (GPS) - Cotati
ISO 13947 2011.12.01 English Metallic powders - Test method for the determination of no
ISO 14470 2011.12.01 English Food irradiation - Requirements for the development, valid
ISO TS 23768-1 2011.12.01 English Rolling bearings - Parts library - Part 1: Reference dictionary
ISO 23611-5 2011.12.01 English Soil quality - Sampling of soil invertebrates - Part 5: Samplin
ISO 13970 2011.12.01 English Recreational diving services - Requirements for the training
ISO 9594-8 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 26262-3 2011.11.15 English Road vehicles - Functional safety - Part 3: Concept phase
ISO 26262-2 2011.11.15 English Road vehicles - Functional safety - Part 2: Management of f
ISO TS 12805 2011.11.15 English Nanotechnologies - Materials specifications - Guidance on s
ISO TS 11308 2011.11.15 English Nanotechnologies - Characterization of single-wall carbon n
ISO 1043-2 2011.11.15 English Plastics - Symbols and abbreviated terms - Part 2: Fillers and
ISO 9241-303 2011.11.15 English Ergonomics of human-system interaction - Part 303: Requir
ISO 15765-2 2011.11.15 English Road vehicles - Diagnostic communication over Controller A
ISO 26262-5 2011.11.15 English Road vehicles - Functional safety - Part 5: Product developm
ISO 26262-6 2011.11.15 English Road vehicles - Functional safety - Part 6: Product developm
ISO 26262-9 2011.11.15 English Road vehicles - Functional safety - Part 9: Automotive Safet
ISO 19011 2011.11.15 English Guidelines for auditing management systems
ISO 1043-1 2011.11.15 English Plastics - Symbols and abbreviated terms - Part 1: Basic poly
ISO 26262-8 2011.11.15 English Road vehicles - Functional safety - Part 8: Supporting proce
ISO 26262-7 2011.11.15 English Road vehicles - Functional safety - Part 7: Production and op
ISO 26262-1 2011.11.15 English Road vehicles - Functional safety - Part 1: Vocabulary
ISO 2431 2011.11.15 English Paints and varnishes - Determination of flow time by use of
ISO TS 11888 2011.11.15 English Nanotechnologies - Characterization of multiwall carbon na
ISO 254 2011.11.15 English Belt drives - Pulleys - Quality, finish and balance
ISO 26262-4 2011.11.15 English Road vehicles - Functional safety - Part 4: Product developm
ISO 19011 2011.11.15 French Lignes directrices pour l’audit des systèmes de manage
ISO 22476-3 AMD 1 2011.11.15 English Geotechnical investigation and testing - Field testing - Part 3
ISO TS 22391-7 2011.11.15 English Plastics piping systems for hot and cold water installations -
ISO 4150 2011.11.15 English Green coffee or raw coffee - Size analysis - Manual and mac
ISO 9594-9 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 21809-3 AMD 1 2011.11.15 English Petroleum and natural gas industries - External coatings for
ISO 22672 2011.11.15 English Space data and information transfer systems - Space link ex
ISO TS 15504-10 2011.11.15 English Information technology - Process assessment - Part 10: Safe
ISO 22476-2 AMD 1 2011.11.15 English Geotechnical investigation and testing - Field testing - Part 2
ISO 9797-3 2011.11.15 English Information technology - Security techniques - Message Au
ISO 16504 2011.11.15 English Information technology - Telecommunications and informati
ISO 12785-2 2011.11.15 English Information technology - Learning, education, and training
ISO 7743 2011.11.15 English Rubber, vulcanized or thermoplastic - Determination of com
ISO 30300 2011.11.15 English Information and documentation - Management systems for
ISO 124 2011.11.15 English Latex, rubber - Determination of total solids content
ISO 18031 2011.11.15 English Information technology - Security techniques - Random bit
ISO 11850 2011.11.15 English Machinery for forestry - General safety requirements
ISO 19149 2011.11.15 English Geographic information - Rights expression language for ge
ISO 22671 2011.11.15 English systems - Space link extension (SLE) - Forward communicati
ISO 9177-1 2011.11.15 English Mechanical pencils - Part 1: Classification, dimensions, perf
ISO 132 2011.11.15 English Rubber, vulcanized or thermoplastic - Determination of flex
ISO 9594-4 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 22432 2011.11.15 English Geometrical product specifications (GPS) - Features utilized
ISO 24789-2 2011.11.15 English Identification cards - Card service life - Part 2: Methods of e
ISO 13887 2011.11.15 English Cold-reduced steel sheet of higher yield strength with impr
ISO 17107 2011.11.15 English Space data and information transfer systems - XML specifica
ISO TR 29172 2011.11.15 English Information technology - Mobile item identification and ma
ISO 125 2011.11.15 English Natural rubber latex concentrate - Determination of alkalini
ISO 27007 2011.11.15 English Information technology - Security techniques - Guidelines fo
ISO 30301 2011.11.15 English Information and documentation - Management systems for
ISO 9594-2 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 9594-6 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 9594-5 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 27034-1 2011.11.15 English Information technology - Security techniques - Application
ISO 9594-3 CORR 1 2011.11.15 English Information technology - Open Systems Interconnection - T
ISO 15927-5 AMD 1 2011.11.15 English Hygrothermal performance of buildings - Calculation and pr
ISO 534 2011.11.15 English Paper and board - Determination of thickness, density and
ISO 814 2011.11.15 English Rubber, vulcanized or thermoplastic - Determination of adh
ISO 4604 2011.11.15 English Reinforcement fabrics - Determination of conventional flexu
ISO 15927-5 AMD 1 2011.11.15 French Performance hygrothermique des bâtiments - Calcul et pr
ISO 15779 2011.11.15 English Condensed aerosol fire extinguishing systems - Requiremen
ISO 1043-1 2011.11.15 French Plastiques - Symboles et termes abrégés - Partie 1: Poly
ISO 2493-2 2011.11.15 French Papier et carton - Détermination de la résistance à la fl
ISO 28017 2011.11.15 English Rubber hoses and hose assemblies, wire or textile reinforce
ISO TR 14294 2011.11.15 French Air des lieux de travail - Mesurage de l'exposition cutanée
ISO 534 2011.11.15 French Papier et carton - Détermination de l’épaisseur, de
ISO 22432 2011.11.15 French Spécification géométrique des produits (GPS) - ÉlÃ
ISO 12830 2011.11.15 French Papiers, cartons et pâtes - Détermination de la teneur e
ISO 814 2011.11.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 4664-1 2011.11.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 30301 2011.11.15 French Information et documentation - Systèmes de gestion des d
ISO 11850 2011.11.15 French Matériel forestier - Exigences de sécurité généra
ISO 21929-1 2011.11.15 French Développement durable dans la construction - Indicateur
ISO 125 2011.11.15 French Latex concentré de caoutchouc naturel - Détermination
ISO TS 12805 2011.11.15 French Nanotechnologies - Spécifications de matériaux - Ligne
ISO 22476-3 AMD 1 2011.11.15 French Reconnaissance et essais géotechniques - Essais en place
ISO 11262 2011.11.15 French Qualité du sol - Dosage des cyanures totaux
ISO TS 22391-7 2011.11.15 French Systèmes de canalisations en plastique pour les installation
ISO 1043-2 2011.11.15 French Plastiques - Symboles et termes abrégés - Partie 2: Cha
ISO TS 16176 2011.11.15 English Rubber compounding ingredients - Carbon black - Determin
ISO 4664-1 2011.11.15 English Rubber, vulcanized or thermoplastic - Determination of dyn
ISO 132 2011.11.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO TR 14294 2011.11.15 English Workplace atmospheres - Measurement of dermal exposur
ISO TS 11308 2011.11.15 French Nanotechnologies - Caractérisation des nanotubes en car
ISO 14380 2011.11.15 English Water quality - Determination of the acute toxicity to Tham
ISO 23559 2011.11.15 English Plastics - Film and sheeting - Guidance on the testing of the
ISO 2493-2 2011.11.15 English Paper and board - Determination of bending resistance - Pa
ISO 14168 2011.11.15 English Metallic powders, excluding hardmetals - Method for testin
ISO 11262 2011.11.15 English Soil quality - Determination of total cyanide
ISO 12828-1 2011.11.15 French Méthode de validation des analyses de gaz d'incendie - P
ISO 7743 2011.11.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 6101-6 2011.11.15 English Rubber Determination of metal content by atomic absorptio
ISO 9241-303 2011.11.15 French Ergonomie de l'interaction hommesystème - Partie 303: Ex
ISO TR 26946 2011.11.15 English Standard method for porosity measurement of thermally sp
ISO 12830 2011.11.15 English Paper, board and pulps - Determination of acid-soluble mag
ISO 21929-1 2011.11.15 English Sustainability in building construction - Sustainability indica
ISO 254 2011.11.15 French Transmissions par courroies - Poulies - Qualité, état de
ISO 12828-1 2011.11.15 English Validation method for fire gas analysis - Part 1: Limits of det
ISO 22476-2 AMD 1 2011.11.15 French Reconnaissance et essais géotechniques - Essais en place
ISO 4900 2011.11.15 English Textile glass - Mats and fabrics - Determination of contact m
ISO 22734-2 2011.11.15 English Hydrogen generators using water electrolysis process - Part
ISO TS 16176 2011.11.15 French Ingrédients de mélange du caoutchouc - Noir de carbo
ISO 28017 2011.11.15 French Tuyaux et flexibles en caoutchouc, Ã armature textile ou m
ISO 124 2011.11.15 French Latex de caoutchouc - Détermination des matières solid
ISO 2431 2011.11.15 French Peintures et vernis - Détermination du temps d’éco
ISO 14496-4 AMD 40 2011.11.01 English Information technology - Coding of audio-visual objects - Pa
ISO 34-2 2011.11.01 English Rubber, vulcanized or thermoplastic - Determination of tear
ISO 812 2011.11.01 English Rubber, vulcanized or thermoplastic - Determination of low
ISO 5173 AMD 1 2011.11.01 English Destructive tests on welds in metallic materials - Bend tests
ISO 4753 2011.11.01 English Fasteners - Ends of parts with external ISO metric thread
ISO 3450 2011.11.01 English Earth-moving machinery - Wheeled or high-speed rubber-t
ISO TS 13278 2011.11.01 English Nanotechnologies - Determination of elemental impurities
ISO 7752-2 2011.11.01 English Cranes - Control layout and characteristics - Part 2: Basic arr
ISO 14496-16 2011.11.01 English Information technology - Coding of audio-visual objects - Pa
ISO 14496-15 AMD 1 2011.11.01 English Information technology - Coding of audio-visual objects - Pa
ISO 13226 2011.11.01 English Rubber - Standard reference elastomers (SREs) for characte
ISO 20903 2011.11.01 English Surface chemical analysis - Auger electron spectroscopy an
ISO 15928-4 2011.11.01 English Houses - Description of performance - Part 4: Fire safety
ISO 5658-2 AMD 1 2011.11.01 English Reaction to fire tests - Spread of flame - Part 2: Lateral spre
ISO 21000-8 AMD 2 2011.11.01 English Information technology - Multimedia framework (MPEG-21
ISO 19794-5 2011.11.01 English Information technology - Biometric data interchange forma
ISO 16873 2011.11.01 English Hydraulic fluid power - Pressure switches - Mounting surfac
ISO 6370-2 2011.11.01 English Vitreous and porcelain enamels - Determination of the resis
ISO 15042 2011.11.01 English Multiple split-system air-conditioners and air-to-air heat pu
ISO 23000-11 AMD 2 2011.11.01 English Information technology - Multimedia application format (M
ISO 22320 2011.11.01 French Sécurité sociétale - Gestion des urgences - Exigences
ISO TS 11774 2011.11.01 English Non-destructive testing - Performance-based qualification
ISO 3035 2011.11.01 English Corrugated fibreboard - Determination of flat crush resistan
ISO TR 24733 2011.11.01 English Information technology - Programming languages, their env
ISO 14898 AMD 1 2011.11.01 English Plastics - Aromatic isocyanates for use in the production of
ISO 23005-7 2011.11.01 English Information technology - Media context and control - Part 7
ISO 15378 2011.11.01 French Articles de conditionnement primaire pour médicaments
ISO 19757-11 2011.11.01 English Information technology - Document Schema Definition Lan
ISO 18013-4 2011.11.01 English Information technology - Personal identification - ISO-comp
ISO 16172 2011.11.01 English Continuous hot-dip metallic-coated steel sheet for corrugat
ISO 15378 2011.11.01 English Primary packaging materials for medicinal products - Partic
ISO 13503-1 2011.11.01 French Industries du pétrole et du gaz naturel - Fluides de compl
ISO TS 14907-2 2011.11.01 English Electronic fee collection - Test procedures for user and fixed
ISO 4381 2011.11.01 English Plain bearings - Tin casting alloys for multilayer plain bearin
ISO 1827 2011.11.01 English Rubber, vulcanized or thermoplastic - Determination of she
ISO 6666 2011.11.01 English Coffee sampling - Triers for green coffee or raw coffee and p
ISO 7267-3 2011.11.01 English Rubber-covered rollers - Determination of apparent hardne
ISO TR 15938-8 AMD 6 2011.11.01 English Information technology - Multimedia content description in
ISO 22320 2011.11.01 English Societal security - Emergency management - Requirements
ISO 15289 2011.11.01 English Systems and software engineering - Content of life-cycle inf
ISO 7970 2011.11.01 English Wheat (Triticum aestivum L.) - Specification
ISO 13503-1 2011.11.01 English Petroleum and natural gas industries - Completion fluids an
ISO 13056 2011.11.01 French Systèmes de canalisations en plastique - Systèmes pour in
ISO 34-2 2011.11.01 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 7267-3 2011.11.01 French Cylindres revêtus de caoutchouc - Détermination de la d
ISO 13162 2011.11.01 French Qualité de l’eau - Détermination de l’activité
ISO 13226 2011.11.01 French Caoutchouc - Élastomères de référence normalisé
ISO 5658-2 AMD 1 2011.11.01 French Essais de réaction au feu - Propagation du feu - Partie 2: P
ISO 2475 2011.11.01 French Caoutchouc chloroprène (CR) - Types à usage généra
ISO 12949 2011.11.01 English Standard test method for measuring the heat release rate o
ISO 2475 2011.11.01 English Chloroprene rubber (CR) - Generalpurpose types - Evaluatio
ISO 22915-11 2011.11.01 English Industrial trucks - Verification of stability - Part 11: Industria
ISO 11296-7 2011.11.01 English Plastics piping systems for renovation of underground nonâ
ISO 5173 AMD 1 2011.11.01 French Essais destructifs des soudures sur matériaux métalliqu
ISO 13162 2011.11.01 English Water quality - Determination of carbon 14 activity - Liquid
ISO 1827 2011.11.01 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 13067 2011.11.01 English Microbeam analysis - Electron backscatter diffraction - Mea
ISO 13209-1 2011.11.01 English Road vehicles - Open Test sequence eXchange format (OTX)
ISO 22915-11 2011.11.01 French Chariots de manutention - Vérification de la stabilité - P
ISO 8835-7 2011.11.01 English Inhalational anaesthesia systems - Part 7: Anaesthetic syste
ISO 15524 2011.11.01 English Pneumatic fluid power - Cylinders - Single-rod short-stroke
ISO TS 14265 2011.11.01 English Health informatics - Classification of purposes for processin
ISO 8968-4 CORR 1 2011.11.01 French Lait - Détermination de la teneur en azote - Partie 4: Dé
ISO 8969 2011.11.01 English Timber structures - Testing of punched metal plate fastener
ISO 17874-3 2011.11.01 English Remote handling devices for radioactive materials - Part 3:
ISO 7783 2011.11.01 French Peintures et vernis - Détermination des propriétés de
ISO 7783 2011.11.01 English Paints and varnishes - Determination of water-vapour trans
ISO 13056 2011.11.01 English Plastics piping systems - Pressure systems for hot and cold w
ISO 3035 2011.11.01 French Carton ondulé - Détermination de la résistance à la
ISO 19892 2011.11.01 English Plastics piping systems - Thermoplastics pipes and fittings fo
ISO 11852 2011.11.01 English Rubber - Determination of magnesium content of field and
ISO 7700-2 2011.11.01 English Food products - Checking the performance of moisture met
ISO 2959 2011.11.01 English Textiles - Woven fabric descriptions
ISO 7970 2011.11.01 French Blé tendre (Triticum aestivum L.) - Spécifications
ISO 17874-3 2011.11.01 French Dispositifs de manipulation à distance pour matériaux ra
ISO 2959 2011.11.01 French Textiles - Désignation des tissus
ISO 3450 2011.11.01 French Engins de terrassement - Engins sur pneumatiques ou sur c
ISO 15042 2011.11.01 French Climatiseurs et pompes à chaleur air/air multi-split - Essais
ISO 16873 2011.11.01 French Transmissions hydrauliques - Pressostats - Plans de pose
ISO TS 13278 2011.11.01 French Nanotechnologies - Dosage des impuretés dans les nanot
ISO 13067 2011.11.01 French Analyse par microfaisceaux - Diffraction d’électrons rÃ
ISO 8969 2011.11.01 French Structures en bois - Essai des connecteurs à plaque méta
ISO 4753 2011.11.01 French Éléments de fixation - Extrémités des élémen
ISO 11296-7 2011.11.01 French Systèmes de canalisations en plastique pour la rénovatio
ISO 7700-2 2011.11.01 French Produits alimentaires - Vérification des humidimètres en
ISO 812 2011.11.01 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 11852 2011.11.01 French Caoutchouc - Détermination par titrage de la teneur en m
ISO 8968-3 CORR 1 2011.11.01 French Lait - Détermination de la teneur en azote - Partie 3: Mé
ISO 14906 2011.10.15 English Electronic fee collection - Application interface definition fo
ISO 14496-5 AMD 10 CORR 5 2011.10.15 English Information technology - Coding of audio-visual objects Par
ISO 14496-5 AMD 5 CORR 1 2011.10.15 English Information technology - Coding of audio-visual objects Par
ISO 14443-2 AMD 1 2011.10.15 English Identification cards - Contactless integrated circuit cards - P
ISO 15765-1 2011.10.15 English Road vehicles - Diagnostic communication over Controller A
ISO 14443-3 AMD 1 2011.10.15 English Identification cards - Contactless integrated circuit cards - P
ISO TS 15926-8 2011.10.15 English Industrial automation systems and integration - Integration
ISO TS 15926-7 2011.10.15 English Industrial automation systems and integration - Integration
ISO 13272 2011.10.15 English Plastics piping systems for non-pressure underground drain
ISO 14496-26 CORR 4 2011.10.15 English Information technology - Coding of audio-visual objects - Pa
ISO 6722-1 2011.10.15 English Road vehicles - 60 V and 600 V singlecore cables - Part 1: Di
ISO 14496-3 CORR 2 2011.10.15 English Information technology - Coding of audio-visual objects - Pa
ISO 15530-3 2011.10.15 English Geometrical product specifications (GPS) - Coordinate meas
ISO 4397 2011.10.15 English Fluid power connectors and associated components - Nomi
ISO 30013 2011.10.15 English Rubber and plastics hoses - Methods of exposure to laborat
ISO 29463-2 2011.10.15 English High-efficiency filters and filter media for removing particle
ISO 29463-1 2011.10.15 English High-efficiency filters and filter media for removing particle
ISO 2921 2011.10.15 English Rubber, vulcanized - Determination of low-temperature retr
ISO 26203-2 2011.10.15 English Metallic materials - Tensile testing at high strain rates - Part
ISO 29176 2011.10.15 English Information technology - Mobile item identification and ma
ISO 18046-1 2011.10.15 English Information technology - Radio frequency identification dev
ISO TR 29158 2011.10.15 English Information technology - Automatic identification and data
ISO 1518-2 2011.10.15 English Paints and varnishes - Determination of scratch resistance -
ISO PAS 21100 2011.10.15 English Air cargo unit load devices - Performance requirements and
ISO 19118 2011.10.15 English Geographic information Encoding
ISO 20312 2011.10.15 English Petroleum and natural gas industries - Design and operating
ISO 7539-6 2011.10.15 English Corrosion of metals and alloys - Stress corrosion testing - Pa
ISO 3972 2011.10.15 English Sensory analysis - Methodology - Method of investigating s
ISO 16000-3 2011.10.15 English Indoor air - Part 3: Determination of formaldehyde and oth
ISO 80601-2-12 CORR 1 2011.10.15 English Medical electrical equipment Part 2-12: Particular requirem
ISO 29463-3 2011.10.15 English High-efficiency filters and filter media for removing particle
ISO 22309 2011.10.15 English Microbeam analysis - Quantitative analysis using energy-dis
ISO 24791-2 2011.10.15 English Information technology - Radio frequency identification (RF
ISO 15889 2011.10.15 English Space data and information transfer systems - The data des
ISO 13400-1 2011.10.15 English Road vehicles - Diagnostic communication over Internet Pro
ISO 29463-4 2011.10.15 English High-efficiency filters and filter media for removing particle
ISO 29463-5 2011.10.15 English High-efficiency filters and filter media for removing particle
ISO TR 27008 2011.10.15 English Information technology - Security techniques - Guidelines fo
ISO TR 24754-2 2011.10.15 English Information technology - Document description and proces
ISO 3972 2011.10.15 French Analyse sensorielle - Méthodologie - Méthode d’é
ISO 14906 2011.10.15 French Perception du télépéage - Définition de l'interface
ISO 2921 2011.10.15 French Caoutchouc vulcanisé - Détermination du retrait à bas
ISO 10667-2 2011.10.15 English Assessment service delivery - Procedures and methods to a
ISO 13272 2011.10.15 French Systèmes de canalisations en plastique pour les branchem
ISO 23003-1 AMD 1 CORR 1 2011.10.15 English Information technology - MPEG audio technologies Part 1: M
ISO 80601-2-12 CORR 1 2011.10.15 French Appareils électromédicaux - Partie 2-12: Exigences par
ISO TS 16407-1 2011.10.15 English Electronic fee collection - Evaluation of equipment for confo
ISO TR 12705 2011.10.15 English Graphic technology - Laboratory test method for chemical g
ISO TS 16410-1 2011.10.15 English Electronic fee collection - Evaluation of equipment for confo
ISO 22309 2011.10.15 French Analyse par microfaisceaux - Analyse élémentaire quan
ISO 7539-6 2011.10.15 French Corrosion des métaux et alliages - Essais de corrosion sou
ISO 10667-1 2011.10.15 English Assessment service delivery - Procedures and methods to a
ISO 30013 2011.10.15 French Tuyaux en caoutchouc et en plastique - Méthodes d'expo
ISO 16000-3 2011.10.15 French Air intérieur - Partie 3: Dosage du formaldéhyde et d'au
ISO 23003-1 AMD 2 CORR 2 2011.10.15 English Information technology - MPEG audio technologies - Part 1
ISO 15530-3 2011.10.15 French Spécification géométrique des produits (GPS) - Mach
ISO 8511 2011.10.15 French Ingrédients de mélange du caoutchouc - Noir de carbo
ISO 26203-2 2011.10.15 French Matériaux métalliques - Essai de traction à vitesses de
ISO 248-1 2011.10.15 English Rubber, raw - Determination of volatile-matter content - Pa
ISO 12137 2011.10.15 English Paints and varnishes - Determination of mar resistance
ISO 248-1 2011.10.15 French Caoutchouc brut - Détermination des matières volatiles
ISO 8625-4 2011.10.15 English Aerospace - Fluid systems - Vocabulary - Part 4: General ter
ISO 4397 2011.10.15 French Raccords et éléments associés dans les transmission
ISO 8511 2011.10.15 English Rubber compounding ingredients - Carbon black - Determin
ISO 1518-2 2011.10.15 French Peintures et vernis - Détermination de la résistance à l
ISO 12137 2011.10.15 French Peintures et vernis - Détermination de la résistance à l
ISO 19118 2011.10.15 French Information géographique - Codage
ISO TR 14763-2-1 2011.10.01 English Information technology – Implementation and operation
ISO 6224 2011.10.01 English Thermoplastics hoses, textile-reinforced, for general-purpo
ISO 188 2011.10.01 English Rubber, vulcanized or thermoplastic - Accelerated ageing an
ISO 80000-1 CORR 1 2011.10.01 English Quantities and units - Part 1: General TECHNICAL CORRIGEN
ISO TS 80004-7 2011.10.01 English, Fr Nanotechnologies - Vocabulary - Part 7: Diagnostics and the
ISO 6887-4 AMD 1 2011.10.01 English Microbiology of food and animal feeding stuffs - Preparatio
ISO 19131 AMD 1 2011.10.01 English Geographic information - Data product specifications AMEN
ISO 15609-5 2011.10.01 English Specification and qualification of welding procedures for m
ISO 19794-6 2011.10.01 English Information technology - Biometric data interchange forma
ISO 9092 2011.10.01 English, Fr Textiles - Nonwovens - Definition
ISO 521 2011.10.01 English Machine chucking reamers with cylindrical shanks and Mor
ISO TS 29140-1 2011.10.01 English Information technology for learning, education and training
ISO 10882-1 2011.10.01 English Health and safety in welding and allied processes - Samplin
ISO 3087 2011.10.01 English Iron ores - Determination of the moisture content of a lot
ISO 10785 2011.10.01 English Space systems - Bellows - Design and operation
ISO 80000-1 CORR 1 2011.10.01 French Grandeurs et unités - Partie 1: Généralités RECTIFI
ISO 14776-372 2011.10.01 English Information technology – Small computer system interfac
ISO 16317 2011.10.01 English Information technology - Telecommunications and informati
ISO TS 29140-2 2011.10.01 English Information technology for learning, education and training
ISO 29164 2011.10.01 English Information technology - Biometrics - Embedded BioAPI
ISO 19757-5 2011.10.01 English Information technology - Document Schema Definition Lan
ISO 29109-4 CORR 1 2011.10.01 English Information technology - Conformance testing methodolog
ISO 15792-1 AMD 1 2011.10.01 English Welding consumables - Test methods - Part 1: Test methods
ISO 15006 2011.10.01 English Road vehicles - Ergonomic aspects of transport information
ISO 16353 2011.10.01 English Information technology - Telecommunications and informati
ISO 15897 2011.10.01 English Information technology - User interfaces - Procedures for th
ISO 29341-19-10 2011.10.01 English Information technology – UPnP device architecture – P
ISO 16371-1 2011.10.01 English Non-destructive testing - Industrial computed radiography w
ISO 16963 2011.10.01 English Information technology - Digitally recorded media for inform
ISO 2296 2011.10.01 English Metal slitting saws with fine and coarse teeth - Metric serie
ISO 14572 2011.10.01 English Road vehicles - Round, sheathed, 60 V and 600 V screened
ISO 5912 2011.10.01 English Camping tents
ISO 6943 2011.10.01 English Rubber, vulcanized - Determination of tension fatigue
ISO 15938-6 AMD 4 2011.10.01 English Information technology - Multimedia content description in
ISO 23269-2 2011.10.01 English Ships and marine technology - Breathing apparatus for ship
ISO 15938-7 AMD 6 2011.10.01 English Information technology - Multimedia content description in
ISO 29109-7 2011.10.01 English Information technology - Conformance testing methodolog
ISO 20846 2011.10.01 English Petroleum products - Determination of sulfur content of au
ISO 11581-40 2011.10.01 English Information technology - User interface icons - Part 40: Man
ISO 10966 2011.10.01 English Sports and recreational equipment - Fabrics for awnings - S
ISO 3030 2011.10.01 English Rolling bearings - Radial needle roller and cage assemblies -
ISO 12677 2011.10.01 English Chemical analysis of refractory products by X-ray fluorescen
ISO 29109-6 2011.10.01 English Information technology - Conformance testing methodolog
ISO 13156 2011.10.01 English Information technology - Telecommunications and informati
ISO PAS 30004 2011.10.01 English Ships and marine technology - Ship recycling management
ISO 5912 2011.10.01 French Tentes de camping
ISO 6943 2011.10.01 French Caoutchouc vulcanisé - Détermination de la fatigue en
ISO 105-B10 2011.10.01 French Textiles - Essais de solidité des coloris - Partie B10: Exposi
ISO 11479-1 2011.10.01 English Glass in building - Coated glass - Part 1: Physical defects
ISO 10882-1 2011.10.01 French Hygiène et sécurité en soudage et techniques connex
ISO 2296 2011.10.01 French Fraises-scies à dentures fine et grosse - Série métrique
ISO 11320 2011.10.01 English Nuclear criticality safety - Emergency preparedness and res
ISO 19794-9 2011.10.01 English Information technology - Biometric data interchange forma
ISO 16371-1 2011.10.01 French Essais non destructifs - Radiographie industrielle numéris
ISO 18920 2011.10.01 English Imaging materials - Reflection prints - Storage practices
ISO 3630-5 2011.10.01 English Dentistry - Endodontic instruments - Part 5: Shaping and cle
ISO 15011-5 2011.10.01 English Health and safety in welding and allied processes - Laborato
ISO 13161 2011.10.01 English Water quality - Measurement of polonium 210 activity conc
ISO 18930 2011.10.01 English Imaging materials - Pictorial colour reflection prints - Metho
ISO 17512-2 2011.10.01 English Soil quality - Avoidance test for determining the quality of s
ISO 6565 2011.10.01 English Tobacco and tobacco products - Draw resistance of cigarett
ISO 105-B10 2011.10.01 English Textiles - Tests for colour fastness - Part B10: Artificial weath
ISO 6565 2011.10.01 French Tabac et produits du tabac - Résistance au tirage des ciga
ISO 24610-2 2011.10.01 English Language resource management - Feature structures - Part
ISO PAS 30004 2011.10.01 French Navires et technologie maritime - Systèmes de manageme
ISO 23228 2011.10.01 English Thermoplastics pipes for the conveyance of fluids - Determ
ISO 9836 2011.10.01 English Performance standards in building - Definition and calculati
ISO 11479-2 2011.10.01 English Glass in building - Coated glass - Part 2: Colour of façade
ISO 6224 2011.10.01 French Tuyaux en matières thermoplastiques à armature textile d
ISO 10966 2011.10.01 French Matériel de sports et d’activités de plein air - Tissus
ISO 3030 2011.10.01 French Roulements - Cages à aiguilles radiales - Dimensions d'enco
ISO 20846 2011.10.01 French Produits pétroliers - Détermination de la teneur en sou
ISO 15609-5 2011.10.01 French Descriptif et qualification d'un mode opératoire de souda
ISO 188 2011.10.01 French Caoutchouc vulcanisé ou thermoplastique - Essais de ré
ISO 3630-5 2011.10.01 French Médecine bucco-dentaire - Instruments d’endodontie
ISO 11320 2011.10.01 French Sûreté-criticité - Préparation des interventions et in
ISO 15792-1 AMD 1 2011.10.01 French Produits consommables pour le soudage - Méthodes d'es
ISO 19131 AMD 1 2011.10.01 French Information géographique - Spécifications de contenu i
ISO 15011-5 2011.10.01 French Hygiène et sécurité en soudage et techniques connex
ISO 6887-4 AMD 1 2011.10.01 French Microbiologie des aliments - Préparation des échantillo
ISO 15006 2011.10.01 French Véhicules routiers - Aspects ergonomiques des systèmes
ISO 13161 2011.10.01 French Qualité de l’eau - Mesurage de l’activité du polo
ISO 521 2011.10.01 French Alésoirs à machine, à queue cylindrique et à queue cô
ISO 12677 2011.10.01 French Analyse chimique des matériaux réfractaires par fluore
ISO 1817 2011.09.15 English Rubber, vulcanized or thermoplastic - Determination of the
ISO 2328 2011.09.15 English Fork-lift trucks - Hook-on type fork arms and fork arm carria
ISO 630-1 2011.09.15 English Structural steels - Part 1: General technical delivery conditio
ISO 14051 2011.09.15 English Environmental management - Material flow cost accounting
ISO 12633-1 2011.09.15 English Hot-finished structural hollow sections of non-alloy and fine
ISO 13628-15 2011.09.15 English Petroleum and natural gas industries - Design and operation
ISO 14300-2 2011.09.15 English Space systems - Programme management - Part 2: Product
ISO 11096 2011.09.15 English Road vehicles - Pedestrian protection - Impact test method
ISO 3771 2011.09.15 English Petroleum products - Determination of base number - Perc
ISO 11354-1 2011.09.15 English Advanced automation technologies and their applications -
ISO 17654 2011.09.15 English Resistance welding - Destructive tests of welds - Pressure te
ISO 12633-2 2011.09.15 English Hot-finished structural hollow sections of non-alloy and fine
ISO 3691-1 2011.09.15 English Industrial trucks - Safety requirements and verification - Par
ISO 15063 2011.09.15 English Plastics - Polyols for use in the production of polyurethanes
ISO 15546 2011.09.15 English Petroleum and natural gas industries - Aluminium alloy drill
ISO 36 2011.09.15 English Rubber, vulcanized or thermoplastic - Determination of adh
ISO 12490 2011.09.15 English Petroleum and natural gas industries - Mechanical integrity
ISO 10242-1 2011.09.15 English Tools for pressing - Punch holder shanks - Part 1: Type A
ISO 11591 2011.09.15 English Small craft, engine-driven - Field of vision from helm positio
ISO 2878 2011.09.15 English Rubber, vulcanized or thermoplastic - Antistatic and conduc
ISO 10303-235 CORR 1 2011.09.15 English Industrial automation systems and integration - Product dat
ISO 2878 2011.09.15 French Caoutchouc vulcanisé ou thermoplastique - Produits anti
ISO 29168-2 2011.09.15 English Information technology - Open systems interconnection - P
ISO 17932 2011.09.15 English Palm oil - Determination of the deterioration of bleachabilit
ISO 8694 2011.09.15 English Tools for moulding - Shouldered ejector pins
ISO 10789 2011.09.15 English Space systems - Programme management - Information and
ISO 8693 2011.09.15 French Outillage de moulage - Éjecteurs lames
ISO 11299-3 2011.09.15 French Systèmes de canalisations en plastique pour la rénovatio
ISO 11299-1 2011.09.15 French Systèmes de canalisations en plastique pour la rénovatio
ISO 12192 2011.09.15 French Papier et carton - Détermination de la résistance à la c
ISO 14309 2011.09.15 English Rubber, vulcanized or thermoplastic - Determination of volu
ISO 11513 2011.09.15 English Gas cylinders - Refillable welded steel cylinders containing m
ISO 17932 2011.09.15 French Huile de palme - Détermination de la détérioration d
ISO 12192 2011.09.15 English Paper and board - Determination of compressive strength -
ISO TS 12208 2011.09.15 English Space systems - Space environment (natural and artificial) -
ISO 6751 2011.09.15 French Outillage de moulage - Éjecteurs à tête cylindrique
ISO 18084 2011.09.15 English Press tools for tablets - Punches and dies
ISO 12679 2011.09.15 English Thermal spraying - Recommendations for thermal spraying
ISO 20877 2011.09.15 French Chaussures - Méthodes d’essai applicables à la chaus
ISO 3771 2011.09.15 French Produits pétroliers - Détermination de l’indice de b
ISO 20877 2011.09.15 English Footwear - Test methods for whole shoe - Thermal insulatio
ISO 17654 2011.09.15 French Soudage par résistance - Essais destructifs des soudures -
ISO 8694 2011.09.15 French Outillage de moulage - Éjecteurs épaulés
ISO 8693 2011.09.15 English Tools for moulding - Flat ejector pins
ISO 11591 2011.09.15 French Petits navires à moteur - Champ de vision depuis le poste d
ISO TS 22559-3 2011.09.15 English Safety requirements for lifts (elevators) - Part 3: Global conf
ISO 3691-1 2011.09.15 French Chariots de manutention - Exigences de sécurité et vé
ISO 11093-7 2011.09.15 French Papier et carton - Essais des mandrins - Partie 7: Détermi
ISO 11299-3 2011.09.15 English Plastics piping systems for renovation of underground gas s
ISO 10799-2 2011.09.15 English Cold-formed welded structural hollow sections of non-alloy
ISO TS 29843-2 2011.09.15 French Qualité du sol - Détermination de la diversité microb
ISO 11093-7 2011.09.15 English Paper and board - Testing of cores - Part 7: Determination o
ISO 10242-1 2011.09.15 French Outillage de presse - Nez de presse - Partie 1: Type A
ISO 36 2011.09.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 9183-2 2011.09.15 French Outillage de presse - Plaques de frottement - Partie 2: Type
ISO 13435 2011.09.15 English Textile machinery and accessories - Bars for drop wires for e
ISO 28901 2011.09.15 English Soil quality - Guidance for burial of animal carcasses to prev
ISO 13059 2011.09.15 English Round timber - Requirements for the measurement of dime
ISO 2328 2011.09.15 French Chariots élévateurs à fourche - Bras de fourche à teno
ISO 9183-2 2011.09.15 English Tools for pressing - Wear plates for press dies - Part 2: Type
ISO 11354-1 2011.09.15 French Technologies d'automatisation avancées et leurs applicati
ISO 18084 2011.09.15 French Outillage de presse pour comprimés - Poinçons et matr
ISO 6751 2011.09.15 English Tools for moulding - Ejector pins with cylindrical head
ISO 14490-8 2011.09.15 English Optics and optical instruments - Test methods for telescopic
ISO 10799-1 2011.09.15 English Cold-formed welded structural hollow sections of non-alloy
ISO TS 22559-4 2011.09.15 English Safety requirements for lifts (elevators) - Part 4: Global conf
ISO TS 29843-2 2011.09.15 English Soil quality - Determination of soil microbial diversity - Part
ISO 12875 2011.09.15 English Traceability of finfish products - Specification on the inform
ISO 12875 2011.09.15 French Traçabilité des produits de la pêche - Spécifications
ISO 1817 2011.09.15 French Caoutchouc vulcanisé ou thermoplastique - Détermina
ISO 11299-1 2011.09.15 English Plastics piping systems for renovation of underground gas s
ISO 14051 2011.09.15 French Management environnemental - Comptabilité des flux m
ISO 14882 2011.09.01 English Information technology - Programming languages - C++
ISO 4223-1 AMD 1 2011.09.01 English Definitions of some terms used in the tyre industry - Part 1:
ISO TR 13086-1 2011.09.01 English Gas cylinders - Guidance for design of composite cylinders -
ISO 24753 2011.09.01 English Information technology - Radio frequency identification (RF
ISO 4671 AMD 1 2011.09.01 English Rubber and plastics hoses and hose assemblies - Methods o
ISO TS 10868 2011.09.01 English Nanotechnologies - Characterization of single-wall carbon n
ISO 6801 AMD 1 2011.09.01 English Rubber or plastics hoses - Determination of volumetric expa
ISO 1580 2011.09.01 English Slotted pan head screws - Product grade A
ISO 7045 2011.09.01 English Pan head screws with type H or type Z cross recess - Produc
ISO 8362-4 2011.09.01 English Injection containers and accessories - Part 4: Injection vials
ISO 8536-1 2011.09.01 English Infusion equipment for medical use - Part 1: Infusion glass b
ISO TR 29110-1 2011.09.01 English Software engineering - Lifecycle profiles for Very Small Entiti
ISO 19706 2011.09.01 English Guidelines for assessing the fire threat to people
ISO 14143-2 2011.09.01 English Information technology - Software measurement - Function
ISO 40260 2011.09.01 English Information technology - W3C Web Services Addressing 1.0
ISO 29341-15-10 2011.09.01 English Information technology – UPnP device architecture – P
ISO 29341-4-4 2011.09.01 English Information technology – UPnP device architecture – P
ISO 29341-4-10 2011.09.01 English Information technology – UPnP device architecture – P
ISO 13053-2 2011.09.01 French Méthodes quantitatives dans l'amélioration de process
ISO 8362-4 2011.09.01 French Récipients et accessoires pour produits injectables - Parti
ISO 29341-14-12 2011.09.01 English Information technology – UPnP device architecture – P
ISO 6261 2011.09.01 English Tool holders with cylindrical shank (boring bars) for indexab
ISO 29341-4-13 2011.09.01 English Information technology – UPnP device architecture – P
ISO 29341-1-1 2011.09.01 English Information technology – UPnP device architecture – P
ISO 29341-4-14 2011.09.01 English Information technology – UPnP device architecture – P
ISO 2010 2011.09.01 English Slotted raised countersunk head screws - Product grade A
ISO TR 24748-2 2011.09.01 English Systems and software engineering - Life cycle management
ISO 7047 2011.09.01 English Raised countersunk head screws (common head style) with
ISO 3665 2011.09.01 English Photography - Intra-oral dental radiographic film and film p
ISO 29341-4-2 2011.09.01 English Information technology –UPnP device architecture – Pa
ISO 7046-1 2011.09.01 English Countersunk flat head screws (common head style) with typ
ISO TR 24748-3 2011.09.01 English Systems and software engineering - Life cycle management
ISO 13053-2 2011.09.01 English Quantitative methods in process improvement - Six Sigma -
ISO 29341-1 2011.09.01 English Information technology – UPnP device architecture – P
ISO 7046-2 2011.09.01 English Countersunk flat head screws (common head style) with typ
ISO 15511 2011.09.01 English Information and documentation - International standard ide
ISO 5600 2011.09.01 English Rubber - Determination of adhesion to rigid materials using
ISO 21070 2011.09.01 English Ships and marine technology - Marine environment protecti
ISO TR 29110-3 2011.09.01 English Software engineering - Lifecycle profiles for Very Small Entiti
ISO 40280 2011.09.01 English Information technology - W3C Web Services Policy 1.5 - Att
ISO 40220 2011.09.01 English Information technology - W3C SOAP Version 1.2 Part 2: Adj
ISO TR 16167 2011.09.01 English Information technology - Telecommunications and informati
ISO 40270 2011.09.01 English Information technology - W3C Web Services Policy 1.5 - Fra
ISO 40210 2011.09.01 English Information technology - W3C SOAP Version 1.2 Part 1: Me
ISO 40250 2011.09.01 English Information technology - W3C Web Services Addressing 1.0
ISO 40230 2011.09.01 English Information technology - W3C SOAP Message Transmission
ISO 29341-3-1 2011.09.01 English Information technology – UPnP device architecture – P
ISO 19773 2011.09.01 English Information technology - Metadata Registries (MDR) modul
ISO 40240 2011.09.01 English Information technology - W3C Web Services Addressing 1.0
ISO 29341-17-10 2011.09.01 English Information technology – UPnP device architecture – P
ISO 10147 2011.09.01 English Pipes and fittings made of crosslinked polyethylene (PE-X) -
ISO 29341-4-11 2011.09.01 English Information technology – UPnP device architecture Part 4
ISO 27035 2011.09.01 English Information technology - Security techniques - Information
ISO 3781 2011.09.01 English Paper and board - Determination of tensile strength after im
ISO 13053-1 2011.09.01 English Quantitative methods in process improvement - Six Sigma -
ISO 5603 2011.09.01 English Rubber, vulcanized - Determination of adhesion to wire cor
ISO 2009 2011.09.01 English Slotted countersunk flat head screws - Product grade A
ISO 8536-1 2011.09.01 French Matériel de perfusion à usage médical - Partie 1: Flaco
ISO 10863 2011.09.01 English Non-destructive testing of welds - Ultrasonic testing - Use o
ISO TR 26927 2011.09.01 English Information technology - Telecommunications and informati
ISO 2010 2011.09.01 French Vis à métaux à tête fraisée bombée fendue - Grad
ISO TR 21254-4 2011.09.01 English Lasers and laser-related equipment - Test methods for laser
ISO 14271 2011.09.01 French Soudage par résistance - Essais de dureté Vickers (force
ISO 24614-2 2011.09.01 English Language resource management - Word segmentation of w
ISO 29845 2011.09.01 English Technical product documentation - Document types
ISO 15511 2011.09.01 French Information et documentation - Identifiant international no
ISO 18052 2011.09.01 English Information technology - Telecommunications and informati
ISO 10863 2011.09.01 French Contrôle non destructif des assemblages soudés - Contr
ISO 1580 2011.09.01 French Vis à métaux à tête cylindrique large fendue - Grade A
ISO 10147 2011.09.01 French Tubes et raccords en polyéthylène réticulé (PE-X) - E
ISO 2009 2011.09.01 French Vis à métaux à tête fraisée fendue - Grade A
ISO TS 10868 2011.09.01 French Nanotechnologies - Caractérisation des nanotubes à sim
ISO TR 21254-4 2011.09.01 French Lasers et équipements associés aux lasers - Méthode
ISO 19706 2011.09.01 French Lignes directrices pour l'évaluation des dangers du feu po
ISO 4223-1 AMD 1 2011.09.01 French Définitions de certains termes utilisés dans l'industrie d
ISO 14409 2011.09.01 French Navires et technologie maritime - Boudins pneumatiques p
ISO 7047 2011.09.01 French Vis à métaux à tête fraisée bombée à empreinte
ISO 22033 2011.09.01 English Nickel alloys - Determination of niobium - Inductively coupl
ISO 7046-1 2011.09.01 French Vis à métaux à tête fraisée à empreinte cruciforme
ISO 4671 AMD 1 2011.09.01 French Tuyaux et flexibles en caoutchouc et en plastique - Métho
ISO 7046-2 2011.09.01 French Vis à métaux à tête fraisée à empreinte cruciforme
ISO 24631-6 2011.09.01 French Identification des animaux par radiofréquence - Partie 6:
ISO 24631-6 2011.09.01 English Radiofrequency identification of animals - Part 6: Represent
ISO 22033 2011.09.01 French Alliages de nickel - Dosage du niobium - Méthode par spe
ISO 15930-8 CORR 1 2011.09.01 English Graphic technology - Prepress digital data exchange using P
ISO 10581 2011.09.01 English Resilient floor coverings - Homogeneous poly(vinyl chloride
ISO 16900-4 2011.09.01 English Respiratory protective devices - Methods of test and test eq
ISO 6801 AMD 1 2011.09.01 French Tuyaux en caoutchouc ou en plastique - Détermination de
ISO 3632-1 2011.09.01 English Spices - Saffron (Crocus sativus L.) - Part 1: Specification
ISO 13053-1 2011.09.01 French Méthodes quantitatives dans l'amélioration de process
ISO 14271 2011.09.01 English Resistance welding - Vickers hardness testing (low-force and
ISO 7045 2011.09.01 French Vis à métaux à tête cylindrique bombée large à em
ISO 29464 2011.09.01 English Cleaning equipment for air and other gases - Terminology
ISO 3781 2011.09.01 French Papier et carton - Détermination de la résistance à la t
ISO 6261 2011.09.01 French Porte-plaquette à queue cylindrique (porte-plaquette d'alÃ
ISO 13194 2011.09.01 English Box pallets - Principal requirements and test methods
ISO 16900-4 2011.09.01 French Appareils de protection respiratoire - Méthodes d’ess
ISO 14409 2011.09.01 English Ships and marine technology - Ship launching air bags
ISO 6272-2 2011.08.15 English Paints and varnishes - Rapiddeformation (impact resistance
ISO 7494-1 2011.08.15 English Dentistry - Dental units - Part 1: General requirements and
ISO 1797-1 2011.08.15 English Dentistry - Shanks for rotary instruments - Part 1: Shanks m
ISO 24415-2 2011.08.15 English Tips for assistive products for walking - Requirements and t
ISO 12543-1 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO 10943 2011.08.15 English Ophthalmic instruments - Indirect ophthalmoscopes
ISO 12543-2 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO 6361-1 2011.08.15 English Wrought aluminium and aluminium alloys - Sheets, strips an
ISO 5459 2011.08.15 English Geometrical product specifications (GPS) - Geometrical tole
ISO 6361-2 2011.08.15 English Wrought aluminium and aluminium alloys - Sheets, strips an
ISO 12543-3 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO 9311-2 2011.08.15 English Adhesives for thermoplastic piping systems - Part 2: Determ
ISO 14620-2 2011.08.15 English Space systems - Safety requirements - Part 2: Launch site op
ISO 4628-6 2011.08.15 English Paints and varnishes - Evaluation of degradation of coatings
ISO 24234 AMD 1 2011.08.15 English Dentistry - Mercury and alloys for dental amalgam AMENDM
ISO 24343-2 2011.08.15 English Resilient and laminate floor coverings - Determination of in
ISO 16140 AMD 1 2011.08.15 English Microbiology of food and animal feeding stuffs - Protocol fo
ISO 12543-4 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO 12543-5 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO TS 16976-3 2011.08.15 English Respiratory protective devices - Human factors - Part 3: Phy
ISO 3598 2011.08.15 English Textile glass - Yarns - Basis for a specification
ISO 6361-5 2011.08.15 English Wrought aluminium and aluminium alloys - Sheets, strips an
ISO 14184-2 2011.08.15 English Textiles - Determination of formaldehyde - Part 2: Released
ISO 26800 2011.08.15 English Ergonomics - General approach, principles and concepts
ISO 24343-3 2011.08.15 English Resilient and laminate floor coverings - Determination of in
ISO 3951-4 2011.08.15 English Sampling procedures for inspection by variables - Part 4: Pr
ISO 14184-1 2011.08.15 English Textiles - Determination of formaldehyde - Part 1: Free and
ISO 13122 2011.08.15 English Ships and marine technology - Launching appliances for dav
ISO 29500-1 2011.08.15 English Information technology - Document description and proces
ISO 25964-1 2011.08.15 English Information and documentation - Thesauri and interoperab
ISO TR 23081-3 2011.08.15 English Information and documentation - Managing metadata for r
ISO 29500-4 2011.08.15 English Information technology - Document description and proces
ISO 6272-1 2011.08.15 English Paints and varnishes - Rapid-deformation (impact resistance
ISO 6361-4 2011.08.15 English Wrought aluminium and aluminium alloys - Sheets, strips an
ISO 10795 2011.08.15 English Space systems - Programme management and quality - Voc
ISO 29500-3 2011.08.15 English Information technology - Document description and proces
ISO 4766 2011.08.15 English Slotted set screws with flat point
ISO 29500-2 2011.08.15 English Information technology - Document description and proces
ISO 2238 2011.08.15 English Machine Bridge Reamers
ISO 12405-1 2011.08.15 English Electrically propelled road vehicles - Test specification for lit
ISO 24754 CORR 1 2011.08.15 English Information technology - Document description and proces
ISO 12136 2011.08.15 English Reaction to fire tests - Measurement of material properties
ISO 4901 2011.08.15 English Reinforced plastics based on unsaturated-polyester resins -
ISO 9344 2011.08.15 English Microscopes - Graticules for eyepieces
ISO 12111 2011.08.15 English Metallic materials - Fatigue testing - Strain-controlled therm
ISO 24800-5 2011.08.15 English Information technology - JPSearch - Part 5: Data interchang
ISO 6361-3 2011.08.15 English Wrought aluminium and aluminium alloys - Sheets, strips an
ISO 2238 2011.08.15 French Alésoirs de chaudronnerie, à machine
ISO 15320 2011.08.15 English Pulp, paper and board - Determination of pentachlorophen
ISO 14651 2011.08.15 French Technologies de l'information - Classement international et
ISO 15222 2011.08.15 French Pneumatiques pour camions et autobus - Méthode de m
ISO 27893 2011.08.15 English Vacuum technology - Vacuum gauges - Evaluation of the un
ISO 1797-1 2011.08.15 French Médecine bucco-dentaire - Queues pour instruments rot
ISO TR 24697 2011.08.15 English Textiles and textile products - Guidelines on the determinati
ISO 14651 2011.08.15 English Information technology - International string ordering and c
ISO 14184-1 2011.08.15 French Textiles - Dosage du formaldéhyde - Partie 1: Formaldé
ISO 26800 2011.08.15 French Ergonomie - Approche générale, principes et concepts
ISO 12543-6 2011.08.15 English Glass in building - Laminated glass and laminated safety gla
ISO 2303 2011.08.15 French Caoutchouc isoprène (IR) - Types polymérisés en solu
ISO 10640 2011.08.15 French Plastiques - Méthodologie d'évaluation du photovieillis
ISO 5459 2011.08.15 French Spécification géométrique des produits (GPS) - Tolé
ISO 2303 2011.08.15 English Isoprene rubber (IR) - Non-oil-extended, solution-polymeriz
ISO 14184-2 2011.08.15 French Textiles - Dosage du formaldéhyde - Partie 2: Formaldé
ISO 12543-5 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 8224-1 AMD 1 2011.08.15 French Machines d'irrigation mobiles - Partie 1: Caractéristiques
ISO 12877 2011.08.15 English Traceability of finfish products - Specification on the inform
ISO 12543-6 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 4628-6 2011.08.15 French Peintures et vernis - Évaluation de la dégradation des r
ISO 6272-2 2011.08.15 French Peintures et vernis - Essais de déformation rapide (résis
ISO 3598 2011.08.15 French Verre textile - Fils - Base de spécification
ISO TR 14187 2011.08.15 English Surface chemical analysis - Characterization of nanostructu
ISO 24234 AMD 1 2011.08.15 French Art dentaire - Mercure et alliages pour amalgame dentaire A
ISO 15320 2011.08.15 French Pâtes, papiers et cartons - Dosage du pentachlorophéno
ISO 6272-1 2011.08.15 French Peintures et vernis - Essais de déformation rapide (résis
ISO 10943 2011.08.15 French Instruments ophtalmiques - Ophtalmoscopes indirects
ISO 776 2011.08.15 French Pâtes - Détermination des cendres insolubles dans l’
ISO 12543-3 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 12543-2 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 12543-4 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 8224-1 AMD 1 2011.08.15 English Traveller irrigation machines - Part 1: Operational character
ISO 9311-2 2011.08.15 French Adhésifs pour réseaux de tuyauteries en matières the
ISO 4766 2011.08.15 French Vis sans tête fendues à bout plat
ISO 776 2011.08.15 English Pulps - Determination of acid-insoluble ash
ISO 28704 2011.08.15 English Fine ceramics (advanced ceramics, advanced technical cera
ISO 15222 2011.08.15 English Truck and bus tyres - Method for measuring relative wet gri
ISO 10640 2011.08.15 English Plastics - Methodology for assessing polymer photoageing b
ISO 12543-1 2011.08.15 French Verre dans la construction - Verre feuilleté et verre feuille
ISO 16140 AMD 1 2011.08.15 French Microbiologie des aliments - Protocole pour la validation de
ISO 7494-1 2011.08.15 French Médecine bucco-dentaire - Units dentaires Partie 1: Exige
ISO 1481 2011.08.01 English Slotted pan head tapping screws
ISO 28002 2011.08.01 English Security management systems for the supply chain - Develo
ISO 7049 2011.08.01 English Cross-recessed pan head tapping screws
ISO 7240-7 2011.08.01 English Fire detection and alarm systems - Part 7: Point-type smoke
ISO 18132-1 2011.08.01 English Refrigerated hydrocarbon and non-petroleum based liquefi
ISO 10271 2011.08.01 English Dentistry - Corrosion test methods for metallic materials
ISO 5834-2 2011.08.01 English Implants for surgery - Ultra-high-molecular-weight polyethy
ISO 1853 2011.08.01 English Conducting and dissipative rubbers, vulcanized or thermop
ISO 18132-3 2011.08.01 English Refrigerated hydrocarbon and non-petroleum based liquefi
ISO TS 25740-1 2011.08.01 English Safety requirements for escalators and moving walks - Part
ISO 16063-41 2011.08.01 English Methods for the calibration of vibration and shock transduc
ISO 11990-1 2011.08.01 English Lasers and laser-related equipment - Determination of laser
ISO 1482 2011.08.01 English Slotted countersunk (flat) head tapping screws
ISO 7053 2011.08.01 English Hexagon washer head tapping screws
ISO 7203-3 2011.08.01 English Fire extinguishing media - Foam concentrates - Part 3: Spec
ISO 22196 2011.08.01 English Measurement of antibacterial activity on plastics and other
ISO 7051 2011.08.01 English Cross-recessed raised countersunk (oval) head tapping scre
ISO 1483 2011.08.01 English Slotted raised countersunk (oval) head tapping screws
ISO 80601-2-13 2011.08.01 English Medical electrical equipment - Part 2-13: Particular require
ISO 1207 2011.08.01 English Slotted cheese head screws - Product grade A
ISO 1479 2011.08.01 English Hexagon head tapping screws
ISO 11221 2011.08.01 English Space systems - Space solar panels - Spacecraft charging ind
ISO 772 2011.08.01 English, Fr Hydrometry - Vocabulary and symbols
ISO 7050 2011.08.01 English Cross-recessed countersunk (flat) head tapping screws
ISO 10373-9 2011.08.01 English Identification cards - Test methods - Part 9: Optical memory
ISO 29341-17-13 2011.08.01 English Information technology – UPnP device architecture – P
ISO 15944-1 2011.08.01 English Information technology - Business Operational View - Part 1
ISO 29341-18-2 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-19-1 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-18-1 2011.08.01 English Information technology – UPnP device architecture – P
ISO 22072 2011.08.01 English Aerospace - Electrohydrostatic actuator (EHA) - Characteristi
ISO 29341-18-4 2011.08.01 English Information technology – UPnP device architecture – P
ISO 23005-4 2011.08.01 English Information technology - Media context and control - Part 4
ISO 29341-17-11 2011.08.01 English Information technology – UPnP device architecture – P
ISO 23002-4 AMD 1 2011.08.01 English Information technology - MPEG video technologies - Part 4:
ISO 7380-1 2011.08.01 English Button head screws - Part 1: Hexagon socket button head sc
ISO 29102 2011.08.01 English Information technology - Office equipment - Method for th
ISO 29341-16-1 2011.08.01 English Information technology – UPnP device architecture – P
ISO 23005-3 2011.08.01 English Information technology - Media context and control - Part 3
ISO 10794 2011.08.01 English Space systems - Programme management - Material, mech
ISO TS 15504-9 2011.08.01 English Information technology - Process assessment - Part 9: Targe
ISO 29341-18-11 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-14-3 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-17-12 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-18-12 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-18-10 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-18-13 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-16-11 2011.08.01 English Information technology – UPnP device architecture – P
ISO 7380-2 2011.08.01 English Button head screws - Part 2: Hexagon socket button head sc
ISO 29341-16-10 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-18-3 2011.08.01 English Information technology – UPnP device architecture – P
ISO 29341-17-1 2011.08.01 English Information technology – UPnP device architecture – P
ISO 10904 2011.08.01 English Fibre-cement corrugated sheets and fittings for roofing and
ISO TS 13498 2011.08.01 French Médecine bucco-dentaire - Essai de torsion sur l'interface
ISO 16121-2 2011.08.01 English Road vehicles - Ergonomic requirements for the driver's wo
ISO TR 16475 2011.08.01 English Guidelines for the repair of water-leakage cracks in concrete
ISO 7050 2011.08.01 French Vis à tôle à tête fraisée à empreinte cruciforme
ISO 12809 2011.08.01 French Matériel de protection des cultures - Pompes volumétr
ISO 5794-3 2011.08.01 English Rubber compounding ingredients - Silica, precipitated, hydr
ISO 1479 2011.08.01 French Vis à tôle à tête hexagonale
ISO 772 2011.08.01 French Hydrométrie - Vocabulaire et symboles
ISO 7049 2011.08.01 French Vis à tôle à tête cylindrique bombée large à emprein
ISO 14701 2011.08.01 English Surface chemical analysis - X-ray photoelectron spectroscop
ISO 16121-3 2011.08.01 English Road vehicles - Ergonomic requirements for the driver's wo
ISO 9936 AMD 1 2011.08.01 French Corps gras d'origines animale et végétale - Détermin
ISO 7380-1 2011.08.01 French Vis à tête cylindrique bombée plate - Partie 1: Vis à tê
ISO 15753 AMD 1 2011.08.01 French Corps gras d'origines animale et végétale - Détermin
ISO 7053 2011.08.01 French Vis à tôle à tête hexagonale à embase plate
ISO 1481 2011.08.01 French Vis à tôle à tête cylindrique large fendue
ISO 26304 2011.08.01 French Produits consommables pour le soudage - Fils-électrodes
ISO 23005-5 2011.08.01 English Information technology - Media context and control - Part 5
ISO 23000-12 AMD 1 2011.08.01 English Information technology - Multimedia application format (M
ISO 1207 2011.08.01 French Vis à métaux à tête cylindrique fendue - Grade A
ISO TR 12888 2011.08.01 French Illustrations choisies d'études de répétabilité et de
ISO 1482 2011.08.01 French Vis à tôle à tête fraisée fendue
ISO 11990-1 2011.08.01 French Lasers et équipements associés aux lasers - Détermin
ISO 26304 2011.08.01 English Welding consumables - Solid wire electrodes, tubular cored
ISO 28540 2011.08.01 French Qualité de l'eau - Détermination de 16 hydrocarbures a
ISO 12090-2 2011.08.01 French Roulements - Guidages sur rail profilé pour roulements p
ISO 7795 2011.08.01 English Crossâ€country skis - Skiâ€binding screws - Test metho
ISO 12625-1 2011.08.01 French Papier tissue et produits tissues - Partie 1: Lignes directrices
ISO 12809 2011.08.01 English Crop protection equipment - Reciprocating positive displace
ISO 7795 2011.08.01 French Skis de fond - Vis de fixation - Méthodes d’essai
ISO 7380-2 2011.08.01 French Vis à tête cylindrique bombée plate - Partie 2: Vis à tê
ISO 11707 2011.08.01 English Magnesium and its alloys - Determination of lead and cadm
ISO 1483 2011.08.01 French Vis à tôle à tête fraisée bombée fendue
ISO 10271 2011.08.01 French Médecine bucco-dentaire - Méthodes d'essai de corros
ISO TR 16475 2011.08.01 French Lignes directrices pour la réparation des fissures dues Ã
ISO 16121-4 2011.08.01 English Road vehicles - Ergonomic requirements for the driver's wo
ISO 12090-1 2011.08.01 French Roulements - Guidages sur rail profilé pour roulements p
ISO 15753 AMD 1 2011.08.01 English Animal and vegetable fats and oils - Determination of polyc
ISO 9936 AMD 1 2011.08.01 English Animal and vegetable fats and oils - Determination of tocop
ISO 6627 2011.08.01 English Internal combustion engines - Piston rings - Expander/segm
ISO 7051 2011.08.01 French Vis à tôle à tête fraisée bombée à empreinte crucif
ISO 12090-1 2011.08.01 English Rolling bearings - Profiled rail guides for linear motion rollin
ISO 27911 2011.08.01 English Surface chemical analysis - Scanningprobe microscopy - Defi
ISO 15938-12 AMD 2 2011.08.01 English Information technology - Multimedia content description in
ISO 28540 2011.08.01 English Water quality - Determination of 16 polycyclic aromatic hyd
ISO TR 12888 2011.08.01 English Selected illustrations of gauge repeatability and reproducib
ISO 12625-1 2011.08.01 English, Fr Tissue paper and tissue products - Part 1: General guidance
ISO TS 13498 2011.08.01 English Dentistry - Torsion test of implant body/connecting part join
ISO 12090-2 2011.08.01 English Rolling bearings - Profiled rail guides for linear motion rollin
ISO 23005-2 2011.08.01 English Information technology - Media context and control - Part 2
ISO 15912 AMD 1 2011.07.15 English Dentistry - Casting investments and refractory die materials
ISO 7005-1 2011.07.15 English Pipe flanges - Part 1: Steel flanges for industrial and genera
ISO 14155 CORR 1 2011.07.15 English Clinical investigation of medical devices for human subjects
ISO 2867 2011.07.15 English Earth-moving machinery - Access systems
ISO 6489-5 2011.07.15 English Agricultural vehicles - Mechanical connections between tow
ISO 11600 AMD 1 2011.07.15 English Building construction - Jointing products - Classification and
ISO 12642-1 2011.07.15 English Graphic technology - Input data for characterization of four
ISO 9241-910 2011.07.15 English Ergonomics of human-system interaction - Part 910: Framew
ISO 9999 2011.07.15 English Assistive products for persons with disability - Classification
ISO 14300-1 2011.07.15 English Space systems - Programme management - Part 1: Structur
ISO TS 10798 2011.07.15 English Nanotechnologies - Characterization of single-wall carbon n
ISO 9241-420 2011.07.15 English Ergonomics of human-system interaction - Part 420: Selecti
ISO 10315 AMD 1 2011.07.15 English Cigarettes - Determination of nicotine in smoke condensate
ISO 14006 2011.07.15 English Environmental management systems - Guidelines for incorp
ISO 2575 AMD 1 2011.07.15 English Road vehicles - Symbols for controls, indicators and tell-tale
ISO 10362-1 AMD 1 2011.07.15 English Cigarettes - Determination of water in smoke condensates -
ISO 14825 2011.07.15 English Intelligent transport systems - Geographic Data Files (GDF) -
ISO 7186 2011.07.15 English Ductile iron products for sewerage applications
ISO 27852 2011.07.15 English Space systems - Estimation of orbit lifetime
ISO 10786 2011.07.15 English Space systems - Structural components and assemblies
ISO 23007-3 2011.07.15 English Information technology - Rich media user interfaces Part 3:
ISO 15112 2011.07.15 English Natural gas - Energy determination
ISO TR 19075-1 2011.07.15 English Information technology - Database languages - SQL Technic
ISO 11037 2011.07.15 English Sensory analysis - Guidelines for sensory assessment of the
ISO 6158 2011.07.15 English Metallic and other inorganic coatings - Electrodeposited coa
ISO 7626-1 2011.07.15 English Mechanical vibration and shock - Experimental determinati
ISO 13385-2 2011.07.15 English Geometrical product specifications (GPS) - Dimensional me
ISO 13385-1 2011.07.15 English Geometrical product specifications (GPS) - Dimensional me
ISO 10830 2011.07.15 English Space systems - Non-destructive testing - Automatic ultraso
ISO 13253 2011.07.15 English Ducted air-conditioners and air-to-air heat pumps - Testing
ISO 29109-9 2011.07.15 English Information technology - Conformance testing methodolog
ISO TR 29199-1 2011.07.15 English Information technology - JPEG XR image coding system - Pa
ISO 11837 2011.07.15 English Machinery for forestry - Saw chain shot guarding systems -
ISO 12905 2011.07.15 English Integrated circuit cards - Enhanced terminal accessibility us
ISO 21254-1 2011.07.15 English Lasers and laser-related equipment - Test methods for laser
ISO 5692-3 2011.07.15 English Agricultural vehicles - Mechanical connections on towed ve
ISO 13385-1 2011.07.15 French Spécification géométrique des produits (GPS) - Éq
ISO 2867 2011.07.15 French Engins de terrassement - Moyens d'accès
ISO 11600 AMD 1 2011.07.15 French Construction immobilière - Produits pour joints - Classifica
ISO TR 22312 2011.07.15 English Societal security - Technological capabilities
ISO 9241-910 2011.07.15 French Ergonomie de l'interaction hommesystème - Partie 910: Ca
ISO TR 28642 2011.07.15 English Dentistry - Guidance on colour measurement
ISO 13130 2011.07.15 French Verrerie de laboratoire - Dessiccateurs
ISO 6489-5 2011.07.15 French Véhicules agricoles - Liaisons mécaniques entre véhic
ISO 21254-2 2011.07.15 French Lasers et équipements associés aux lasers - Méthode
ISO 21254-3 2011.07.15 English Lasers and laser-related equipment - Test methods for laser
ISO 21254-2 2011.07.15 English Lasers and laser-related equipment - Test methods for laser
ISO 10362-2 AMD 1 2011.07.15 French Cigarettes - Dosage de l'eau dans les condensats de fumé
ISO 10362-1 AMD 1 2011.07.15 French Cigarettes - Dosage de l'eau dans les condensats de fumé
ISO 13253 2011.07.15 French Climatiseurs et pompes à chaleur air/air raccordés - Essa
ISO 11837 2011.07.15 French Matériel forestier - Système de protection contre l’Ã
ISO 21254-3 2011.07.15 French Lasers et équipements associés aux lasers - Méthode
ISO 5692-3 2011.07.15 French Véhicules agricoles - Liaisons mécaniques sur véhicu
ISO 9241-420 2011.07.15 French Ergonomie de l'interaction homme-système - Partie 420: S
ISO 19794-1 2011.07.15 English Information technology - Biometric data interchange forma
ISO 2575 AMD 1 2011.07.15 French Véhicules routiers - Symboles pour les commandes, indic
ISO 9999 2011.07.15 French Produits d'assistance pour personnes en situation de handi
ISO TS 16181 2011.07.15 English Footwear - Critical substances potentially present in footwe
ISO 10988 2011.07.15 English Equipment for crop protection - Knapsack motorized air-ass
ISO 21254-1 2011.07.15 French Lasers et équipements associés aux lasers - Méthode
ISO 13132 2011.07.15 English Laboratory glassware - Petri dishes
ISO 6158 2011.07.15 French Revêtements métalliques et autres revêtements inorga
ISO 13079 2011.07.15 French Matériel de laboratoire en verre et en plastique - Tubes p
ISO 22119 2011.07.15 English Microbiology of food and animal feeding stuffs - Real-time p
ISO 7626-1 2011.07.15 French Vibrations et chocs mécaniques - Détermination expé
ISO 29842 2011.07.15 French Analyse sensorielle - Méthodologie - Plans de présenta
ISO TS 10798 2011.07.15 French Nanotechnologies - Caractérisation des nanotubes de car
ISO 13079 2011.07.15 English Laboratory glass and plastics ware - Tubes for the measurem
ISO 22118 2011.07.15 French Microbiologie des aliments - Réaction de polymérisatio
ISO 10362-2 AMD 1 2011.07.15 English Cigarettes - Determination of water in smoke condensates -
ISO 13385-2 2011.07.15 French Spécification géométrique des produits (GPS) - Éq
ISO 29842 2011.07.15 English Sensory analysis - Methodology - Balanced incomplete bloc
ISO 15112 2011.07.15 French Gaz naturel - Détermination de l'énergie
ISO 12493 2011.07.15 English Rubber, vulcanized - Determination of stress in tension upo
ISO 20152-2 2011.07.15 English Timber structures - Bond performance of adhesives - Part 2
ISO 25841 2011.07.15 English Female condoms - Requirements and test methods
ISO 15912 AMD 1 2011.07.15 French Art dentaire - Revêtements et matériaux pour modèles
ISO 22118 2011.07.15 English Microbiology of food and animal feeding stuffs - Polymeras
ISO 22119 2011.07.15 French Microbiologie des aliments - Réaction de polymérisatio
ISO 13132 2011.07.15 French Verrerie de laboratoire - Boîtes de Petri
ISO 11037 2011.07.15 French Analyse sensorielle - Lignes directrices pour l'évaluation s
ISO TS 16181 2011.07.15 French Chaussures - ubstances critiques potentiellement présent
ISO 14006 2011.07.15 French Systèmes de management environnemental - Lignes direct
ISO 13130 2011.07.15 English Laboratory glassware - Desiccators
ISO 10315 AMD 1 2011.07.15 French Cigarettes - Dosage de la nicotine dans les condensats de fu
ISO 11435 2011.07.15 French Alliages de nickel - Détermination de la teneur en molybd
ISO 10988 2011.07.15 French Matériel de protection des cultures - Pulvérisateurs Ã
ISO 29282 2011.07.15 English Intelligent transport systems - Communications access for la
ISO 21927-10 2011.07.15 English Smoke and heat control systems - Part 10: Specification for
ISO 27667 2011.07.15 English Road vehicles - Brake lining friction materials - Evaluation of
ISO 11435 2011.07.15 English Nickel alloys - Determination of molybdenum content - Indu
ISO 16120-1 2011.07.01 English Non-alloy steel wire rod for conversion to wire - Part 1: Gen
ISO 11783-11 2011.07.01 English Tractors and machinery for agriculture and forestry - Serial
ISO 7207-2 2011.07.01 English Implants for surgery - Components for partial and total kne
ISO 7870-4 2011.07.01 English Control charts - Part 4: Cumulative sum charts
ISO 14160 2011.07.01 English Sterilization of health care products - Liquid chemical sterili
ISO 8565 2011.07.01 English Metals and alloys - Atmospheric corrosion testing - General
ISO 139 AMD 1 2011.07.01 English Textiles - Standard atmospheres for conditioning and testin
ISO 21809-1 2011.07.01 English Petroleum and natural gas industries - External coatings for
ISO 11311 2011.07.01 English Nuclear criticality safety - Critical values for homogeneous p
ISO 16000-25 2011.07.01 English Indoor air - Part 25: Determination of the emission of semi-
ISO 10218-2 2011.07.01 French Robots et dispositifs robotiques - Exigences de sécurité
ISO 17566 2011.07.01 English Space systems - General test documentation
ISO 7711-2 2011.07.01 English Dentistry - Rotary diamond instruments - Part 2: Discs
ISO 13187 2011.07.01 English Information technology – Server management command
ISO 19012-1 2011.07.01 English Microscopes - Designation of microscope objectives - Part 1
ISO 10965 2011.07.01 English Textile floor coverings - Determination of electrical resistan
ISO 24800-2 2011.07.01 English Information technology - JPSearch - Part 2: Registration, ide
ISO 10218-2 2011.07.01 English Robots and robotic devices - Safety requirements for indust
ISO 14372 2011.07.01 English Welding consumables - Determination of moisture resistanc
ISO 6875 2011.07.01 English Dentistry - Patient chair
ISO 19776-3 2011.07.01 English Information technology - Computer graphics, image proces
ISO 16120-3 2011.07.01 English Non-alloy steel wire rod for conversion to wire - Part 3: Spe
ISO TR 29127 2011.07.01 English Information technology - System Process and Architecture f
ISO 16120-4 2011.07.01 English Non-alloy steel wire rod for conversion to wire - Part 4: Spe
ISO 6185-4 2011.07.01 English Inflatable boats - Part 4: Boats with a hull length of between
ISO 7331 2011.07.01 English Ski-poles for alpine skiing - Requirements and test methods
ISO 16120-2 2011.07.01 English Non-alloy steel wire rod for conversion to wire - Part 2: Spe
ISO 23006-2 2011.07.01 English Information technology - MPEG extensible middleware (MX
ISO 13738 2011.07.01 English Lubricants, industrial oils and related products (class L) - Fam
ISO 11156 2011.07.01 English Packaging - Accessible design - General requirements
ISO 19005-2 2011.07.01 English Document management - Electronic document file format f
ISO 14372 2011.07.01 French Produits consommables pour le soudage - Détermination
ISO 16120-2 2011.07.01 French Fil-machine en acier non allié destiné à la fabrication d
ISO 6185-4 2011.07.01 French Bateaux pneumatiques - Partie 4: Bateaux d'une longueur d
ISO 13738 2011.07.01 French Lubrifiants, huiles industrielles et produits connexes (classe
ISO 10571 2011.07.01 English Tyres for mobile cranes and similar specialized machines
ISO 16120-3 2011.07.01 French Fil-machine en acier non allié destiné à la fabrication d
ISO 16120-4 2011.07.01 French Fil-machine en acier non allié destiné à la fabrication d
ISO 16000-18 2011.07.01 French Air intérieur - Partie 18: Détection et dénombrement
ISO 7331 2011.07.01 French Bâtons de skis alpins - Exigences et méthodes d'essai
ISO 29942 2011.07.01 English Prophylactic dams - Requirements and test methods
ISO 21809-1 2011.07.01 French Industries du pétrole et du gaz naturel - Revêtements ex
ISO 139 AMD 1 2011.07.01 French Textiles - Atmosphères normales de conditionnement et d
ISO 7711-2 2011.07.01 French Médecine bucco-dentaire - Instruments rotatifs diamantÃ
ISO 14160 2011.07.01 French Stérilisation des produits de santé - Agents stérilisan
ISO 23000-11 AMD 1 2011.07.01 English Information technology - Multimedia application format (M
ISO 10677 2011.07.01 French Céramiques techniques - Sources lumineuses UV destinÃ
ISO 10677 2011.07.01 English Fine ceramics (advanced ceramics, advanced technical cera
ISO 6646 2011.07.01 English Rice - Determination of the potential milling yield from pad
ISO 16000-18 2011.07.01 English Indoor air - Part 18: Detection and enumeration of moulds
ISO 27468 2011.07.01 English Nuclear criticality safety - Evaluation of systems containing
ISO 11311 2011.07.01 French Sûreté-criticité - Valeurs critiques pour oxydes mixtes
ISO 16120-1 2011.07.01 French Fil-machine en acier non allié destiné à la fabrication d
ISO 7207-2 2011.07.01 French Implants chirurgicaux - Éléments de prothèses partie
ISO 10571 2011.07.01 French Pneumatiques pour grues mobiles et engins spéciaux sim
ISO TS 11356 2011.07.01 French Matériel de protection des cultures - Traçabilité - Enr
ISO 8565 2011.07.01 French Métaux et alliages - Essais de corrosion atmosphérique
ISO 28600 2011.07.01 English Surface chemical analysis - Data transfer format for scannin
ISO 11863 2011.07.01 English Buildings and building-related facilities - Functional and use
ISO 16000-25 2011.07.01 French Air intérieur - Partie 25: Dosage de l'émission de comp
ISO 11783-11 2011.07.01 French Tracteurs et matériels agricoles et forestiers - Réseaux
ISO 27468 2011.07.01 French Sûreté-criticité - Évaluation des systèmes mettant
ISO 11206 2011.07.01 English Water quality - Determination of dissolved bromate - Meth
ISO 6646 2011.07.01 French Riz - Détermination des rendements d'usinage à partir d
ISO TS 11356 2011.07.01 English Crop protection equipment - Traceability - Spray parameter
ISO 6875 2011.07.01 French Médecine bucco-dentaire - Fauteuil dentaire
ISO 22901-2 2011.07.01 English Road vehicles - Open diagnostic data exchange (ODX) - Part
ISO 2859-1 AMD 1 2011.06.15 English Sampling procedures for inspection by attributes - Part 1: Sa
ISO 13628-4 CORR 1 2011.06.15 English Petroleum and natural gas industries - Design and operation
ISO 376 2011.06.15 English Metallic materials - Calibration of force-proving instruments
ISO 10414-2 2011.06.15 English Petroleum and natural gas industries - Field testing of drillin
hydraulic fluids and standard elastomeric materials
of audio-visual objects - Part 5: Reference software AMENDMENT 26: Reference software for scalable complexity 3D mesh coding in 3DG c
of audio-visual objects Part 5: Reference software AMENDMENT 30: ExtendedCore2D reference software
of audio-visual objects - Part 27: 3D Graphics conformance AMENDMENT 3: Scalable complexity 3D mesh coding conformance in 3DGCM
y techniques - Hash-functions - Part 3: Dedicated hash-functions TECHNICAL CORRIGENDUM 1
ols - Safety requirements - Part 10: Compression power tools
atural gas industries - Air-cooled heat exchangers
es - Safety specifications - Part 3: Protection of persons against electric shock
ols - Safety requirements - Part 8: Sanders and polishers
ols - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
Part 4: Nanostructured materials
Part 5: Nano/bio interface
stic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
Test methods for footwear
elt mass-flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time temperature h
ulture and forestry - Serial control and communications data network - Part 4: Network layer
ols - Safety requirements - Part 9: Die grinders
ols - Safety requirements - Part 11: Nibblers and shears
ols - Safety requirements - Part 2: Cutting-off and crimping power tools
ols - Safety requirements - Part 5: Rotary percussive drills
feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method TECHNICAL C
y techniques - Hash-functions - Part 2: Hash-functions using an n-bit block cipher TECHNICAL CORRIGENDUM 1
of audio-visual objects - Part 16: Animation Framework eXtension (AFX) AMENDMENT 1: Efficient representation of 3D meshes with multip
elt mass-flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics - Part 1: Standard method
al identification - ISO-compliant driving licence - Part 3: Access control, authentication and integrity validation TECHNICAL CORRIGENDUM 1
al identification - ISO-compliant driving licence - Part 2: Machine-readable technologies TECHNICAL CORRIGENDUM 1
igh-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
ery - Safety requirements and testing for portable, hand-held, powered brushcutters and grass-trimmers - Part 2: Machines for use with ba
ent Schema Definition Languages (DSDL) - Part 8: Document Semantics Renaming Language (DSRL) TECHNICAL CORRIGENDUM 1
springs with rectangular section - Housing dimensions and colour coding AMENDMENT 1
orating thermoplastic sealing elements - Part 2: Vocabulary
on of tensile breaking force
ns (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
estry - Laboratory tests and performance requirements for roll-over protective structures - Part 2: Machines having a rotating platform with
e des produits (GPS) - Tolérancement dimensionnel - Partie 2: Dimensions autres que tailles linéaires
tries - Specific requirements for offshore structures - Part 6: Marine operations TECHNICAL CORRIGENDUM 1
ery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an i
equirements and testing for pole†mounted powered pruners - Part 2: Machines for use with back†pack power source
specification integration - Part 1: Framework
ng - Architecture description
chain-saw safety requirements and testing - Part 2: Chain-saws for tree service
mmunications and information exchange between systems - Short Distance Visible Light Communication (SDVLC)
d enumeration of moulds - Sampling by impaction TECHNICAL CORRIGENDUM 1
- Part 1: Spacecraft initialization and commissioning
- Part 3: Commissioning report
ng - Life cycle processes - Requirements engineering
ents - Determination of water content - Karl Fischer methods
s - Sulfur - Methods of test
re measurement - Functional size measurement - Part 1: Definition of concepts TECHNICAL CORRIGENDUM 1
l’indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 1: Méthode normale
bing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
d multicast protocol: Specification for simplex group applications
ng - Developing user documentation in an agile environment
irtualization Format (OVF) specification
ascular devices - Part 3: Vena cava filters
chain-saw safety requirements and testing - Part 1: Chain-saws for forest service
ng - Requirements for managers of user documentation
terface icons - Part 1: Introduction to and overview of icon standards
um/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
equirements and testing for pole†mounted powered pruners - Part 1: Machines fitted with an integral combustion engine
tries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids
astique - Systèmes pour installation d’eau chaude et froide sous pression - Méthode d’essai de l’étanchéité sous vide
moplastique - Détermination de la résistance au déchirement - Partie 2: Petites éprouvettes (éprouvettes de Delft)
c - Détermination de la dureté apparente - Partie 3: Méthode Pusey et Jones
mination de l’activité volumique du carbone 14 - Méthode par comptage des scintillations en milieu liquide
e référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés
pagation du feu - Partie 2: Propagation latérale sur les produits de bâtiment et de transport en position verticale AMENDEMENT 1
Types à usage général - Méthode d'évaluation
ring the heat release rate of low flammability mattresses and mattress sets
alpurpose types - Evaluation procedure
stability - Part 11: Industrial variable-reach trucks
ation of underground non†pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
ur matériaux métalliques - Essais de pliage AMENDEMENT 1
carbon 14 activity - Liquid scintillation counting method
moplastique - Détermination du module de cisaillement et de la force d’adhérence à des plaques rigides - Méthodes du quadrup
ackscatter diffraction - Measurement of average grain size
nce eXchange format (OTX) - Part 1: General information and use cases
ification de la stabilité - Partie 11: Chariots de manutention à portée variable
- Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
s - Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
n of purposes for processing personal health information
ur en azote - Partie 4: Détermination de la teneur en azote non protéique RECTIFICATIF TECHNIQUE 1
nched metal plate fasteners and joints
oactive materials - Part 3: Electrical master-slave manipulators
ation des propriétés de transmission de la vapeur d’eau - Méthode de la coupelle
tion of water-vapour transmission properties - Cup method
e systems for hot and cold water - Test method for leaktightness under vacuum
on de la résistance à la compression à plat
plastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
esium content of field and concentrated natural rubber latex by titration
rformance of moisture meters in use - Part 2: Moisture meters for oilseeds
L.) - Spécifications
stance pour matériaux radioactifs - Partie 3: Télémanipulateurs maître-esclave électriques
sur pneumatiques ou sur chenilles en caoutchouc à grande vitesse - Exigences de performance et modes opératoires d’essai des syst
ur air/air multi-split - Essais et détermination des caractéristiques de performance
ssostats - Plans de pose
mpuretés dans les nanotubes en carbone (CNTs) par spectroscopie de masse à plasma induit (ICP-MS)
raction d’électrons rétrodiffusés - Mesurage de la taille moyenne des grains
nnecteurs à plaque métallique emboutie et des assemblages
©mités des éléments à filetage extérieur métrique ISO
astique pour la rénovation des réseaux de branchements et de collecteurs d’assainissement enterrés sans pression - Partie 7: Tu
tion des humidimètres en service - Partie 2: Humidimètres pour graines oléagineuses
moplastique - Détermination de la fragilité à basse température
ar titrage de la teneur en magnésium du latex de plantation et du latex concentré de caoutchouc naturel
ur en azote - Partie 3: Méthode de minéralisation en bloc (Méthode de routine semimicro rapide) RECTIFICATIF TECHNIQUE 1
ation interface definition for dedicated short-range communication
of audio-visual objects Part 5: Reference software AMENDMENT 10: SSC, DST, ALS and SLS reference software TECHNICAL CORRIGENDUM
of audio-visual objects Part 5: Reference software AMENDMENT 5: Reference software extensions for error resilient simple scalable profile
integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface AMENDMENT 1: Limits of electromagnetic di
unication over Controller Area Network (DoCAN) - Part 1: General information and use case definition
integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision AMENDMENT 1: Electromagnetic disturbance handling and
nd integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 8: Implementation methods f
nd integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 7: Implementation methods f
ressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral m
of audio-visual objects - Part 26: Audio conformance TECHNICAL CORRIGENDUM 4
nglecore cables - Part 1: Dimensions, test methods and requirements for copper conductor cables
of audio-visual objects - Part 3: Audio TECHNICAL CORRIGENDUM 2
ns (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated w
ciated components - Nominal outside diameters of tubes and nominal hose sizes
hods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
media for removing particles in air - Part 1: Classification, performance testing and marking
on of low-temperature retraction (TR test)
g at high strain rates - Part 2: Servo-hydraulic and other test systems
item identification and management - Consumer privacy-protection protocol for Mobile RFID services
requency identification device performance test methods - Part 1: Test methods for system performance
atic identification and data capture techniques - Direct Part Mark (DPM) Quality Guideline
tion of scratch resistance - Part 2: Variable-loading method
ormance requirements and test parameters
tries - Design and operating limits of drill strings with aluminium alloy components
Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
- Method of investigating sensitivity of taste
n of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method
rt 2-12: Particular requirements for basic safety and essential performance of critical care ventilators TECHNICAL CORRIGENDUM 1
media for removing particles in air - Part 3: Testing flat sheet filter media
ve analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
requency identification (RFID) for item management - Software system infrastructure - Part 2: Data management
sfer systems - The data description language EAST specification
unication over Internet Protocol (DoIP) - Part 1: General information and use case definition
media for removing particles in air - Part 4: Test method for determining leakage of filter elements - Scan method
media for removing particles in air - Part 5: Test method for filter elements
y techniques - Guidelines for auditors on information security controls
ent description and processing languages - Minimum requirements for specifying document rendering systems - Part 2: Formatting specific
logie - Méthode d’éveil à la sensibilité gustative
Définition de l'interface d'application relative aux communications dédiées à courte portée
rmination du retrait à basse température (essai TR)
ocedures and methods to assess people in work and organizational settings - Part 2: Requirements for service providers
astique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U
audio technologies Part 1: MPEG Surround AMENDMENT 1: Conformance testing TECHNICAL CORRIGENDUM 1
Partie 2-12: Exigences particulières relatives à la sécurité de base et aux performances essentielles des ventilateurs pulmonaires pou
tion of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes
test method for chemical ghosting in lithography
tion of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes
alyse élémentaire quantitative par spectrométrie à sélection d’énergie (EDS) des éléments ayant un numéro atomiqu
es - Essais de corrosion sous contrainte - Partie 6: Préparation et utilisation des éprouvettes préfissurées pour essais sous charge c
ocedures and methods to assess people in work and organizational settings - Part 1: Requirements for the client
tique - Méthodes d'exposition à des sources lumineuses de laboratoire - Détermination du changement de coloration, d'aspect et d'a
du formaldéhyde et d'autres composés carbonylés dans l'air intérieur et dans l'air des chambres d'essai - Méthode par échan
audio technologies - Part 1: MPEG Surround AMENDMENT 2: Reference software TECHNICAL CORRIGENDUM 2
e des produits (GPS) - Machines à mesurer tridimensionnelles (MMT): Technique pour la détermination de l'incertitude de mesure - Parti
aoutchouc - Noir de carbone - Détermination de la distribution granulométrique
ai de traction à vitesses de déformation élevées - Partie 2: Systèmes d’essai servo-hydrauliques et autres systèmes d’essai
olatile-matter content - Part 1: Hot-mill method and oven method
tion of mar resistance
on des matières volatiles - Partie 1: Méthode par mélangeage à chaud et méthode par étuvage
bulary - Part 4: General terms and definitions relating to control/actuation systems
és dans les transmissions hydrauliques et pneumatiques - Diamètres extérieurs nominaux des tubes et tailles nominales des tuyaux fl
s - Carbon black - Determination of pellet size distribution
ation de la résistance à la rayure - Partie 2: Méthode à charge variable
ation de la résistance à la détérioration
ementation and operation of customer premises cabling – Part 2-1: Planning and installation – Identifiers within administration system
nforced, for general-purpose water applications - Specification
stic - Accelerated ageing and heat resistance tests
neral TECHNICAL CORRIGENDUM 1
Part 7: Diagnostics and therapeutics for healthcare
feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules
roduct specifications AMENDMENT 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatm
welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding
ric data interchange formats - Part 6: Iris image data
on of tension fatigue
edia content description interface - Part 6: Reference software AMENDMENT 4: Reference software for video signature tools
reathing apparatus for ships - Part 2: Self-contained breathing apparatus for shipboard firefighters
edia content description interface - Part 7: Conformance testing AMENDMENT 6: Conformance testing for video signature tools
mance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 7: Signature/sign time series data
tion of sulfur content of automotive fuels - Ultraviolet fluorescence method
terface icons - Part 40: Management of icon registration
nt - Fabrics for awnings - Specification
oller and cage assemblies - Boundary dimensions and tolerances
roducts by X-ray fluorescence (XRF) - Fused cast-bead method
mance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 6: Iris image data
mmunications and information exchange between systems - High rate 60 GHz PHY, MAC and PALs
hip recycling management systems - Guidelines for the implementation of ISO 30000
astique pour la rénovation des réseaux de gaz enterrés Partie 3: Tubage par tuyau continu sans espace annulaire
astique pour la rénovation des réseaux de gaz enterrés Partie 1: Généralités
on de la résistance à la compression - Méthode d’écrasement en anneau
stic - Determination of volume and/or surface resistivity
steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) - Design, construction, testing, use and period
n de la détérioration de l’indice de blanchiment (DOBI) et de la teneur en carotène
n of compressive strength - Ring crush method
ent (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical
urs à tête cylindrique
ent description and processing languages - Office Open XML File Formats - Part 2: Open Packaging Conventions
es - Test specification for lithium-ion traction battery packs and systems - Part 1: High-power applications
ent description and processing languages - Minimum requirements for specifying document rendering systems TECHNICAL CORRIGENDUM
ment of material properties using a fire propagation apparatus
aturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydro
s, advanced technical ceramics) - Test method for cyclic bending fatigue of porous ceramics at room temperature
measuring relative wet grip performance - Loaded new tyres
sing polymer photoageing by FTIR and UV/visible spectroscopy
e feuilleté et verre feuilleté de sécurité - Partie 1: Définitions et description des composants
tocole pour la validation des méthodes alternatives AMENDEMENT 1
its dentaires Partie 1: Exigences générales et méthodes d'essai
or the supply chain - Development of resilience in the supply chain - Requirements with guidance for use
s - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
on-petroleum based liquefied gaseous fuels - General requirements for automatic tank gauges - Part 1: Automatic tank gauges for liquefied
ds for metallic materials
molecular-weight polyethylene - Part 2: Moulded forms
ers, vulcanized or thermoplastic - Measurement of resistivity
on-petroleum based liquefied gaseous fuels - General requirements for automatic tank gauges - Part 3: Automatic tank gauges for liquefied
rs and moving walks - Part 1: Global essential safety requirements (GESR)
bration and shock transducers - Part 41: Calibration of laser vibrometers
ent - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
apping screws
concentrates - Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids
tivity on plastics and other non-porous surfaces
nk (oval) head tapping screws
head tapping screws
art 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
duct grade A
al connections between towed and towing vehicles - Part 5: Specifications for non-swivel clevis couplings
roducts - Classification and requirements for sealants AMENDMENT 1
or characterization of four-colour process printing - Part 1: Initial data set
eraction - Part 910: Framework for tactile and haptic interaction
th disability - Classification and terminology
nagement - Part 1: Structuring of a project
tion of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
eraction - Part 420: Selection of physical input devices
otine in smoke condensates - Gas-chromatographic method AMENDMENT 1
ems - Guidelines for incorporating ecodesign
rols, indicators and tell-tales AMENDMENT 1
ter in smoke condensates - Part 1: Gas-chromatographic method AMENDMENT 1
eographic Data Files (GDF) - GDF5.0
ge applications
se languages - SQL Technical Reports - Part 1: XQuery Regular Expression Support in SQL
sensory assessment of the colour of products
tings - Electrodeposited coatings of chromium for engineering purposes
Experimental determination of mechanical mobility - Part 1: Basic terms and definitions, and transducer specifications
ns (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges Design and metrological characteristics
ns (GPS) - Dimensional measuring equipment - Part 1: Callipers Design and metrological characteristics
testing - Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
o-air heat pumps - Testing and rating for performance
mance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 9: Vascular image data
R image coding system - Part 1: System architecture
in shot guarding systems - Test method and performance criteria
ed terminal accessibility using cardholder preference interface
ent - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles
al connections on towed vehicles - Part 3: Swivel hitch rings
e des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1: Pieds à coulisse caractéristiques de conception et caractér
mécaniques entre véhicules remorqueurs et véhicules remorqués - Partie 5: Spécifications pour attelages de type chape non rota
©s aux lasers - Méthodes d'essai du seuil d'endommagement provoqué par laser - Partie 2: Détermination du seuil
ent - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
ent - Test methods for laser-induced damage threshold - Part 2: Threshold determination
les condensats de fumée - Partie 2: Méthode de Karl Fischer AMENDEMENT 1
les condensats de fumée - Partie 1: Méthode par chromatographie en phase gazeuse AMENDEMENT 1
ur air/air raccordés - Essais et détermination des caractéristiques de performance
de protection contre l’éjection d’éléments de chaînes de scie - Méthode d’essai et critères de performance
©s aux lasers - Méthodes d'essai du seuil d'endommagement provoqué par laser - Partie 3: Possibilités de traitement par puissance
mécaniques sur véhicules remorqués Partie 3: Anneaux d'attelage rotatifs
me-système - Partie 420: Sélection des dispositifs d'entrée physiques
ric data interchange formats - Part 1: Framework
pour les commandes, indicateurs et témoins Amendement 1
nnes en situation de handicap - Classification et terminologie
otentially present in footwear and footwear components - Determination of phthalates in footwear materials
Knapsack motorized air-assisted sprayers - Test methods and performance limits
©s aux lasers - Méthodes d'essai du seuil d'endommagement provoqué par laser - Partie 1: Définitions et principes de base
autres revêtements inorganiques - Dépôts électrolytiques de chrome pour usages industriels
re et en plastique - Tubes pour le mesurage de la vitesse de sédimentation des érythrocytes par la méthode Westergren
feeding stuffs - Real-time polymerase chain reaction (PCR) for the detection of foodborne pathogens - General requirements and definitio
s - Détermination expérimentale de la mobilité mécanique - Partie 1: Termes et définitions fondamentaux et spécification de
logie - Plans de présentation en blocs incomplets équilibrés
ation des nanotubes de carbone à simple paroi par microscopie électronique à balayage et spectroscopie à dispersion d'énergie
e - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method
©action de polymérisation en chaîne (PCR) pour la détection et la quantification des micro-organismes pathogènes dans les alimen
ter in smoke condensates - Part 2: Karl Fischer method AMENDMENT 1
e des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2: Jauges de profondeur caractéristiques de conception et carac
- Balanced incomplete block designs
e l'énergie
on of stress in tension upon heating
mance of adhesives - Part 2: Additional requirements
and test methods
matériaux pour modèles réfractaires AMENDEMENT 1: Exigence et méthode d'essai pour l'adéquation d'expansion des matéria
feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristic
©action de polymérisation en chaîne (PCR) en temps réel pour la détection des micro-organismes pathogènes dans les aliments -
e dans les condensats de fumée - Méthode par chromatographie en phase gazeuse AMENDEMENT 1
tion de la teneur en molybdène - Méthode par spectrométrie d'émission atomique à plasma induit par haute fréquence
tures - Pulvérisateurs à dos motorisés à jet porté - Méthodes d'essai et limites de performance
mmunications access for land mobiles (CALM) - Satellite networks
- Part 10: Specification for power output devices
on materials - Evaluation of corrosion effects on painted backing plates and brake shoes
molybdenum content - Inductively coupled plasma/atomic emission spectrometric method
ersion to wire - Part 1: General requirements
ulture and forestry - Serial control and communications data network - Part 11: Mobile data element dictionary
nts for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials
ve sum charts
cts - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for charac
corrosion testing - General requirements
for conditioning and testing AMENDMENT 1
tries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE a
values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors
on of the emission of semi-volatile organic compounds by building products - Micro-chamber method
Exigences de sécurité pour les robots industriels - Partie 2: Systèmes robots et intégration
umentation
uments - Part 2: Discs
er management command line protocol (SM CLP) specification
croscope objectives - Part 1: Flatness of field/Plan
nation of electrical resistance
h - Part 2: Registration, identification and management of schema and ontology
ety requirements for industrial robots - Part 2: Robot systems and integration
nation of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
ter graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 3: Compressed binary encodi
ersion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
Process and Architecture for Multilingual Semantic Reverse Query Expansion
ersion to wire - Part 4: Specific requirements for wire rod for special applications
ith a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
rements and test methods
ersion to wire - Part 2: Specific requirements for general-purpose wire rod
extensible middleware (MXM) - Part 2: MXM API
ated products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB
eneral requirements
onic document file format for long-term preservation - Part 2: Use of ISO 32000-1 (PDF/A-2)
soudage - Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée
destiné à la fabrication de fils - Partie 2: Exigences spécifiques au fil-machine d'usage général
: Bateaux d'une longueur de coque comprise entre 8 m et 24 m et d'une puissance moteur nominale supérieure ou égale à 15 kW
t produits connexes (classe L) - Famille E (Huiles pour moteurs à combustion interne) - Spécifications applicables aux huiles pour moteur
ar specialized machines
destiné à la fabrication de fils - Partie 3: Exigences spécifiques au fil-machine en acier effervescent ou pseudo-effervescent à bas carb
destiné à la fabrication de fils - Partie 4: Exigences spécifiques au fil-machine pour applications spéciales
ection et dénombrement des moisissures - Échantillonnage par impaction
s et méthodes d'essai
ts and test methods
naturel - Revêtements externes des conduites enterrées et immergées utilisées dans les systèmes de transport par conduites - Pa
s de conditionnement et d'essai AMENDEMENT 1
truments rotatifs diamantés - Partie 2: Disques
nté - Agents stérilisants chimiques liquides pour dispositifs médicaux non réutilisables utilisant des tissus animaux et leurs dériv
edia application format (MPEG-A) - Part 11: Stereoscopic video application format AMENDMENT 1: Stereoscopic video application format c
ces lumineuses UV destinées aux essais des matériaux photocatalytiques semi-conducteurs
s, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
ntial milling yield from paddy and from husked rice
d enumeration of moulds - Sampling by impaction
tion of systems containing PWR UOX fuels - Bounding burnup credit approach
tiques pour oxydes mixtes homogènes de plutonium et d'uranium hors réacteurs
destiné à la fabrication de fils - Partie 1: Exigences générales
ments de prothèses partielle et totale de l'articulation du genou - Partie 2: Surfaces articulaires constituées de matériaux métallique
es et engins spéciaux similaires
tures - Traçabilité - Enregistrement des paramètres liés à la pulvérisation
orrosion atmosphérique - Exigences générales
transfer format for scanning-probe microscopy
cilities - Functional and user requirements and performance - Tools for assessment and comparison
e de l'émission de composés organiques semi-volatils des produits de construction - Méthode de la micro-chambre
s et forestiers - Réseaux de commande et de communication de données en série - Partie 11: Dictionnaire d'éléments de donnÃ
tion des systèmes mettant en oeuvre des combustibles REP UOX - Approche conservative de crédit burnup
dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
ments d'usinage à partir du riz paddy et du riz décortiqué
ceability - Spray parameter recording
uteuil dentaire
data exchange (ODX) - Part 2: Emissions-related diagnostic data
on by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection AMENDMENT 1
tries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment TECHNICAL CORRIGENDUM 1
f force-proving instruments used for the verification of uniaxial testing machines
tries - Field testing of drilling fluids - Part 2: Oil-based fluids
y 3D mesh coding in 3DG compression model
g conformance in 3DGCM
CHNICAL CORRIGENDUM 1
stion engine
utilisant la 1,10-phénanthroline
es basses et élevées
hines pour utilisation avec source motrice portée à dos
non filetés
tie 2: Machines ayant une tourelle d'orientation avec une cabine et une flèche sur la tourelle
reatment of food
ssment of conformity
ale AMENDEMENT 1
ICATIF TECHNIQUE 1
ECHNICAL CORRIGENDUM 5
ient simple scalable profile TECHNICAL CORRIGENDUM 1
mits of electromagnetic disturbance levels parasitically generated by the PICC
properties
nstant displacement
CORRIGENDUM 1
Part 2: Formatting specifications for document rendering systems
nyle) non plastifié (PVC-U), polypropylène (PP), polypropylène avec modificateurs minéraux (PP-MD) et polyéthylène (PE) - Spé
tion - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fisher
re catalogue and the treatment of coverages in an application schema
f airborne particles
nature tools
signature tools
sign time series data
pe à arc au xénon
n products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chroma
ed tensile (PSGT) specimens
Directory Service
e Device Service
or enterprise communications
et à la molette
©tection et mesurages
RIGENDUM 1
t floor covering
breathing environment
composition tiles
nguage Reference
TECHNICAL CORRIGENDUM 1
érences spécifiées
e l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif
e réduite
ernant le mercure
e importante
c tank gauges for liquefied natural gas on board marine carriers and floating storage
c tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
Architecture
se liquide à haute performance AMENDEMENT 1: Mise à jour des réactifs et confirmation de la validité des données statistiques
ur les séries 1, 2 et 3
ic detection (GC-MS)
s de performance
e traitement par puissance (énergie) laser
t principes de base
de Westergren
equirements and definitions
ntaux et spécification des transducteurs
dispersion d'énergie
haute fréquence
- Requirements for characterization, development, validation and routine control of a sterilization process for medical devices
re ou égale à 15 kW
les aux huiles pour moteurs deux-temps à essence (catégories EGB, EGC et EGD)
ransport par conduites - Partie 1: Revêtements à base de polyoléfines (PE tricouche et PP tricouche)
us animaux et leurs dérivés - Exigences pour la caractérisation, le développement, la validation et le contrôle de routine d'un pro
video application format conformance and reference software
MENDMENT 1
CAL CORRIGENDUM 1
lieux de culture les plus usuels
chambers in traffic areas and underground installations
olyéthylène (PE) - Spécifications relatives aux regards et aux boîtes d'inspection et de branchement dans les zones de circulation et