Professional Documents
Culture Documents
Config BBU Service IP
Config BBU Service IP
Config BBU Service IP
Config PC IP
Get into command line to check whether the BBU service IP of 192.254.1.16 is reachable or not .
username:zte
password:zte
4. Switch over the mode
After get into mode of ushell, input ‘ps’ to check the PID of MRG.exe
Just copy the data from data plan and paste to the BBU.
After writing ,check make sure it has “write the config info success ”
Move the cable from debug port to eth0,then on the command line of PC , ping service IP of BBU to
check whether is available or not,if it is available ,it means it is successful to write date to BBU.