Professional Documents
Culture Documents
Nama: Memo Hardika NIM: H1A113419
Nama: Memo Hardika NIM: H1A113419
Nama: Memo Hardika NIM: H1A113419
NIM : H1A113419
LESSON 10
THE PROPERTIES OF CONCRETE :
TENSILE TEST FOR CONCRETE
PARAGRAPH 1
Main idea :
For certain aspects of design it is necessary to obtain the measure of the tensile
strength of concrete.
Supporting Details :
This is particularly needed in some of the design aspects of prestressed and partially
prestressed concrete.
PARAGRAPH 2
Main idea :
The modulus of rupture test is carried out on a standard small beam of cross-
section.
Supporting details :
The modulus of rupture varies between 11% and 23% of the compressive strength,
and a value of 15% is commonly assumed when testing is not carried out.
PARAGRAPH 3
Main idea :
Compressive stresses must exist at the top and bottom of the cylinder.
PARAGRAPH 4
Main idea :
The direct tensile strength of the concrete varies between 0.5 and 0.7 fsp.
Supporting idea :
The direct tensile strength determined in this way is somewhat less tha the modulus of
rupture.