Professional Documents
Culture Documents
Lutfi Rosida 2D-D3 Teknik Kimia 1731410089/11: Absorption of Minerals and Pollutants
Lutfi Rosida 2D-D3 Teknik Kimia 1731410089/11: Absorption of Minerals and Pollutants
Lutfi Rosida 2D-D3 Teknik Kimia 1731410089/11: Absorption of Minerals and Pollutants
1731410089/11
WORD FAMILIES
Absorb (Verb) : The soil will absorb the falling rain water.
Absorption (Noun) : In the process of purifying water occurs the process of
absorption of minerals and pollutants.
Absorbed (Adjective) : The solution reacted with the sponge in the test tube will be
absorbed in the sponge.
Adjust (Verb) : The temperature inside the body will adjust to the
temperature in the room.
Compressible (Adjective) : Gas is the type of compressible fluid which when given a
pressure force, the volume and temperature will change.
Condense (Verb) : The heated water will condense on its outer surface.
Connect (Verb) : The salt bridge is used to connect the reduction reaction and
the oxidation of half-cells from the voltaic cell.
Connected (Adjective) : The practicum tools connected to the computer will be easy
to operate.
Ignition (Noun) : The flames spread to all parts of the house within minutes of
ignition.
Igneous (Adjective) : In geology, igneous rocks are rocks that were once so hot that
they were liquid.
Push (Verb) : If you push the button, the engine will stop.
Push (Noun) : Push the green button and the light will go on.
Pushed (Adjective) : The boat is difficult pushed to the land because it was too big.
Rotation (Noun) : The rotation of the earth round the sun takes one year.
Rotatory (Adjective) : The size of rice can be minimized using a rotatory process in
ball mill.
WRITING TASK
TOOL:
1. Stove
2. Pot
3. Thermometer
4. Knife
5. Spoon
6. Stirrer
7. Scales
8. Filter cloth
9. Presses
INGREDIENTS :
1. Fresh milk
2. Rennin enzyme
3. CaCl2 solution 25%
4. Cheese starter(Lactobacilus bulgaricus and streptococcus thermophilus )
5. Smooth salt
PROCEDURE:
1. In the first stage, fresh milk is pasteurized at 72-730C for 15 minutes
2. Then cool to temperature 440C
3. Add the cheese starter, mix well, and leave for 15 minutes
4. Add enzyme renin and CaCl2 solution 25%
5. After that stir and let stand for 30-60 minutes with a fixed temperature of 440C until
curd is formed
6. Test the compactness of curd by pressing the surface of the curd in the pan with a
knife
7. If the curd is compact, the small curd is cut into a cube with a knife
8. Then let it stand for 5 minutes, to separate between curd and whey (liquid)
9. Next wash the curd by adding hot water and let it sit until the curd merges again
10. After that collect curd into the center of the pan and whey is discarded using a spoon
11. Curd / lumps are filtered and pressed
12. The mold is removed and immersed in saturated salt solution for 1 hour
13. Drain for 2 hours at 170C
14. Finally the cheese is ready to consume
PROCESS
The first stage is milk pasteurized at 72-730C for 15 minutes, in order to kill
harmful organisms such as bacteria in milk. Then cooled to 440C and add the cheese starter in
the form of lactobacilus bulgaricus and streptococcus thermophilus, stir well for 15 minutes,
the temperature must be maintained. After that add rennin enzyme and 25% CaCl2 solution
and the temperature must be kept at 440C because at that temperature the optimum
temperature for bacteria to live. Stir and let stand for 30-60 minutes with a fixed temperature
of 440C until curd is formed. Curd compactness test by pressing the curd surface slowly, curd
will be declared compact if no curd is left on the blade surface. If the curd is not compact,
then let it stand again with a fixed temperature until it is compact.
If the curd has been compact, cut the cube curd with a knife. After that let stand 5
minutes so that separate between curd and whey, then wash curd by adding hot water and let
stand until curd reunite. Collect curd into the center of the pan and whey is discarded using a
spoon. After that, the curd / lump is filtered with a filter cloth and pressed with a cheese
press. To make saltiness in the cheese the mold is immersed in saturated salt solution for 1
hour. Then drain for 2 hours at 170C or add it to the frezzer. Finally the cheese is ready to
consume.