The document outlines revisions needed to fire protection, industrial water, and domestic water drawings for a new infrastructure architecture design. Key points include: changing the location of fire hydrants and fire protection pipes; increasing the number of Siamese connections and ensuring separation of domestic and industrial water pipes; adding tie-in points and pipe sizing details for buildings; and addressing missing details like for air relief valves and compressed air design. Revision of general notes is also required to clarify pipe locations and add missing drawing codes.
The document outlines revisions needed to fire protection, industrial water, and domestic water drawings for a new infrastructure architecture design. Key points include: changing the location of fire hydrants and fire protection pipes; increasing the number of Siamese connections and ensuring separation of domestic and industrial water pipes; adding tie-in points and pipe sizing details for buildings; and addressing missing details like for air relief valves and compressed air design. Revision of general notes is also required to clarify pipe locations and add missing drawing codes.
The document outlines revisions needed to fire protection, industrial water, and domestic water drawings for a new infrastructure architecture design. Key points include: changing the location of fire hydrants and fire protection pipes; increasing the number of Siamese connections and ensuring separation of domestic and industrial water pipes; adding tie-in points and pipe sizing details for buildings; and addressing missing details like for air relief valves and compressed air design. Revision of general notes is also required to clarify pipe locations and add missing drawing codes.
Notes: A: Fire protection : drawing codes to "450-930CI- 6913-D-001:009"(MAX. NO. OF DRAWINGS NOT EXCEED 9). Removing alarm check valve. 4 Siamese connection instead of two. Changing location of FHC according to the new arch. Pre-coordination between fire and water supply pipes . Changing the path of FP pipes. Legend correcting. Fire hydrant re-allocation ( away from road ) . No of fire hydrant shouldn't be less than 30 . Sizing of fire pipes ( already done in the new version ) . Revision of fire pipes location around the buildings (moving the fire pipes away from elec. Cables). FHC details shall be as shown in the D.D package . B: Industrial Water : drawing codes to "426-G3-OCI-69B- 020:029"(MAX. NO. OF DRAWINGS NOT EXCEED 9).
Sizing of the industrial water pipes (already done
in the new version). Separation of the layers of domestic and industrial water .
C: Domestic water : drawing codes to "426-G3-OCI-69B-
010:019"(MAX. NO. OF DRAWINGS NOT EXCEED 9).
Tie in point for guard room ( Ahmed Ezzat's version
). Add sizing for tie in points . Miscellaneous of buried valve with eye rod whether it is with valve box or not. Details of 3/4" to 4" valves don't exist . Remove The valve located after the water meter ( already done ). Adding valve box at all Junctions. D:General Notes :
create tie points for buildings ( which don't have
) "HVS,social building for parking and cleaning ,etc.. " Miscellaneous details paper codes of water "426-G3-OCI-69B –D-040:…). Details for air relief valve and water hammer arrestor , valve box don't exist . The path of Pipes of FP and plumbing ( are they located below the car road or the pavement ?). Compressed air design.