Professional Documents
Culture Documents
Es X56901
Es X56901
SPEC. NO
MATERIAL SPECIFICATION ES-X56901
Contents
V-\
REV .
CJ2002 Release - 18.1.2002 M.Ota
S YM .
REV. LET. DESCRIPTION OF CHANGE REV. PAGE DATE REV. BY
REVISION
REFERENCE APPROVED BY CHECKED BY PREPARED BY
. .::;-_~
]M-~t{j
~A\~ f
s PEe. NO I213
I ES-X56901
1. Scope
This specification applies to the requirements of controlled substances for use in selecting
materials for the parts which are delivered to Mitsubishi Motors Corporation and/or related
companies for complete vehicles including any direct and indirect materials for vehicles or
parts. This is based on the related regulations shown in paragraph 7 .
2. Effective Date
This specification applies to the parts for the vehicles which are produced after 1 January 2003.
Excluded are service parts of vehicles whose mass production is already stopped.
3. Definition
(1) Controlled substances for use
Substances to be prohibited or reduced, such as hazardous substances or environmentally
. undesirable substances which are restricted in order to protect human health and the
environment; they are either not permitted to be contained in materials and parts, or may be
used only for a specific purpose.
4. Requirements
The controlled substances shall not be used according to EU Directive 2000/53/EC shown
in paragraph 7. Regarding Annex II in 2000/53/EC, the amendment on a regular basis shall be
obeyed. For the reference Appendix 1 shows the amendment (2002/525/EC) which was decided
by commission on June 2002.
In case of materials and components which are exempted until expiry data, the delivery of the
parts shall be started at least 6 months before their expiry date.
Table 1: Controlled Substances for Use
Controlled substance Conventional usage (examples) Exemption
Lead and lead compounds Paint, Grease, Metal parts, According to
PVC/rubber parts, Adhesive, 2000/53/EC
Glass (Bulb)
Mercury and Fluorescent tubes,
mercury compounds Switch (G sensor)
Cadmium and Paint, PVC parts,
cadmium compounds Electrical components. Amber bulbs
Hexavalent chromium Corrosion preventative coatings on
connecting elements. etc.
6. Designation
This specification shall be designated in drawings as follows:
Material Specification
ES-X56901
Controlled Substances for Use
Even when this specification is not designated in the drawing, the supplier shall be obliged to
fulfil all the requirements contained in this specification.
7. Others
~ Reference
- DIRECTIVE 2000/53/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
ON END OF LIFE VEHICLES.
Mass of Concentration Mass of Surface Concentration Mass of Concentration Mass of Concentration Number of
Part number Part name Contained material Lead of Lead area (cm2) of or Hexavalent Mercury of Mercury Cadmium ofCadm •um Purpose of the add1tion application excempt1on
(mg) (wt%) Hexavalent Chromium Chromium (wt%) (mg) (wt%) (m~) (wt%) (see A ppendex I )
..
I
Supplier Name Approved by Prepared by Date Report Number Summary of Report
Check below (checkmark: X)
~
D no contain
(~.
~
r <f
D contain but exempted