Professional Documents
Culture Documents
Edmt341410c Rxqtay PDF
Edmt341410c Rxqtay PDF
Edmt341410c Rxqtay PDF
0 FXB(P)Q, FDKS and FTKJ models are not available to the Pakistan market.
Cooling Only 50 Hz
EDMT341410C
Introduction ................................................................................................................. 3
1
2
Part 1 General Information ............................................... 1 ................................ 5
3
Part 2 Indoor Units................................................................................................... 31
4
Ceiling Mounted Cassette (Round Flow with Sensing) Type... 2 FXFQ-S ................33
5
Ceiling Mounted Cassette (Round Flow) Type ....................... 3 FXFQ-LU ................51
6
Ceiling Mounted Cassette (Compact Multi Flow) Type........... 4 FXZQ-M ................69
7
4-Way Flow Ceiling Suspended Type..................................... 5 FXUQ-A ................87
8
Ceiling Mounted Cassette (Double Flow) Type ...................... 6 FXCQ-M ................97
9
Ceiling Mounted Cassette Corner Type.................................. 7 FXKQ-MA ..............115
10
Slim Ceiling Mounted Duct Type (Standard Series) ............... 8 FXDQ-PB / FXDQ-NB ..............129
11
Slim Ceiling Mounted Duct Type (Compact Series)................ 9 FXDQ-SP ..............153
12
Middle Static Pressure Ceiling Mounted Duct Type................ 10 FXSQ-P ..............175
13
Ceiling Mounted Duct Type .................................................... 11 FXMQ-P ..............215
14
Ceiling Mounted Duct Type .................................................... 12 FXMQ-MA ..............253
15
Ceiling Suspended Type......................................................... 13 FXHQ-MA ..............267
16
Wall Mounted Type ................................................................. 14 FXAQ-P ..............281
17
Floor Standing Type / Concealed Floor Standing Type .......... 15 FXLQ-MA / FXNQ-MA ..............297
18
Floor Standing Duct Type ....................................................... 16 FXVQ-N ..............321
19
Clean Type Air Conditioner..................................................... 17 FXBQ-P / FXBPQ-P ..............369
20
Part 3 Outdoor-Air Processing Unit .................................. 18 FXMQ-MF .......... 393
21
Part 4 Residential Indoor Units with Connection to
BP Units.................................................................. 19 ............................ 417 22
Part 5 BP Units.................................................................. 20 ............................ 465 23
2 Table of Contents
EDMT341410C Introduction
1. Introduction
1.1 Publication List of Engineering Data for VRV Products
Published
Refrigerant Type Product Series Book No. Type, Hz Model name Area Note in
High-COP type
RXYQ12-50THY1(E)
- Correction of
EDMT341324B H/P 50 Hz Standard type Vietnam, capacity tables Oct. 2014
RXYQ6-60T(N)Y1(E) Hong Kong of outdoor
units, etc.
Space saving type
RXYQ18-50T(S)Y1(E)
- Change of cooling
operation range
High-COP type of outdoor units
RXQ12-50THY1(E) - Addition of indoor
Singapore, units FXDQ-SP,
Standard type Malaysia, FXSQ, FTKJ
Inverter EDMT341410B C/O 50 Hz RXQ6-60T(N)Y1(E) Vietnam, - Model change of Jan. 2016
T(A) Pakistan indoor units FXVQ
Space saving type from M to N series
RXQ18-50T(S)Y1(E) - Deletion of indoor
units FCQ, FFQ
and FBQ
- Model change
High-COP type of outdoor
RXQ12-50TAHYM(E) units RXQ from
Singapore, T to TA series
Standard type Malaysia, - Addition of
EDMT341410C C/O 50 Hz RXQ6-60TA(N)YM(E) Vietnam, indoor unit Jun. 2016
Pakistan FXVQ500NY16
Space saving type - New lineup of
RXQ18-50TA(S)YM(E) indoor units
FXBQ, FXBPQ
RXYMQ4-6AVE - New lineup of
Air EDVN331516 H/P 50 Hz RXYMQ8/9AY1 Vietnam outdoor units Jun. 2015
cooled Inverter
R410A A RXMQ4-6AVE Singapore, - New lineup of
EDMT331522 C/O 50 Hz Malaysia, Jul. 2015
RXMQ8/9AY1 Vietnam outdoor units
Normal type - Addition of
RXYQ5-54PAY1(E)
RXYQ5-54PAYL(E) 6HP outdoor
units (Asean
RXYQ5-54PTL(E) and Oceania
EDMT341107A H/P 50/60 Hz General Dec. 2012
High-COP type only)
- Model change
RXYQ16-50PAHY1(E) of FXAQ from
RXYQ16-50PAHYL(E)
RXYQ16-50PHTL(E) MA to P series
- Addition of 6HP
Normal type outdoor unit
RXQ5-54PAY1 (Asean and
EDMT341015A C/O 50 Hz General Oceania only) Dec. 2012
High-COP type - Model change
RXQ16-50PAHY1 of FXAQ from
Inverter
MA to P series
P(A)
Single outdoor unit
ED341119 C/O 50 Hz series ASEAN Dec. 2011
RSXQ8-18PY1
C/O 50 Hz ASEAN
ED341211 H/P 50 Hz RX(Y)Q6PAY1 Oceania Aug. 2012
EDMT37-750A H/R 50 Hz REYQ8-48PY1 General Aug. 2013
ED341014 H/P 50 Hz RQYQ8-48PY1 ASEAN Dec. 2010
ED341207 C/O 50 Hz RQQ8-48PY1 ASEAN Jul. 2012
EDMT34-635A H/P 50/60 Hz RX(Y)MQ4-6PVE General Dec. 2012
C/O 50/60 Hz
Water RWEYQ8-30PY1
H/P,H/R 50 Hz
ED30-942 H/P,H/R 60 Hz RWEYQ10-30PYL General Dec. 2009
cooled RWEYQ10-30PTL
For indoor and outdoor Option
Option for all type OH14-01 50/60 Hz
units
General
handbook
Apr. 2014
Heat Reclaim Ventilator (VAM) GJ ED71-613 50/60 Hz VAM150-2000GJVE General Feb. 2006
- With DX coil
and humidifier
VKM50-100GAMV1
Heat Reclaim Ventilator (VKM) GA(M) ED71-440B 50 Hz
VKM50-100GAV1
General (VKM-GAM) Mar. 2012
- With DX coil
(VKM-GA)
EDMT341410C as shown by .
H/P: Heat Pump
H/R: Heat Recovery
C/O: Cooling Only
Introduction 3
Introduction EDMT341410C
4 Introduction
EDMT341410C
Part 1
1
General Information
1. Model Names of Indoor/Outdoor Units....................................................6
1.1 Indoor Units ..............................................................................................6
1.2 Outdoor Units ...........................................................................................7
1.3 Air Treatment Equipment .........................................................................9
2. External Appearance.............................................................................10
2.1 Indoor Units ............................................................................................10
2.2 Outdoor Units .........................................................................................12
2.3 Air Treatment Equipment .......................................................................14
3. Combination of Outdoor Units...............................................................15
4. Nomenclature........................................................................................17
5. Capacity Range.....................................................................................20
5.1 For VRV Indoor Units Only.....................................................................20
5.2 For a System with Residential Indoor Units or
VRV Mix Combination ............................................................................26
6. Selection Procedure..............................................................................27
6.1 Selection Procedure ...............................................................................27
General Information 5
Model Names of Indoor/Outdoor Units EDMT341410C
FXBQ and FXBPQ models are not available to the Pakistan market.
6 General Information
EDMT341410C Model Names of Indoor/Outdoor Units
1
Residential Indoor Units with Connection to BP Units
Cooling Only
Capacity range 2.5 kW 3.5 kW 5.0 kW 6.0 kW 7.1 kW Power
supply,
Capacity index 25 35 50 60 71 Standard
25EA 35EA — — —
Slim ceiling
mounted duct type FDKS 25CA 35CA — — — VMB
— — 50C 60C —
25N 35N 50N — — VMW
25N 35N 50N — — VMS
25N 35N 50N — — VMMW
FTKJ
25N 35N 50N — — VMMS
Wall mounted type 25N 35N 50N — — VMVW
25N 35N 50N — — VMVS
25D 35D — — — VM
FTKS — — 50B — — VMA
— — 50F 60F 71F VM
Note: BP units are necessary for residential indoor units.
Residential indoor units can be connected with only single outdoor units.
FDKS and FTKJ models are not available to the Pakistan market.
BP Units
Type Model name
3 Ports BPMKS967A3
BP units
2 Ports BPMKS967A2
Standard Type
Series Model name Power supply
6TA 8TA 10TA 12TA 14TA 16TA 18TAN 20TAN 22TAN 24TAN
Cooling only RXQ 26TAN 28TAN 30TAN 32TAN 34TAN 36TAN 38TAN 40TAN 42TAN 44TAN YM(E)
46TAN 48TAN 50TAN 52TAN 54TAN 56TAN 58TAN 60TAN — —
General Information 7
Model Names of Indoor/Outdoor Units EDMT341410C
Capacity range 28 HP 30 HP 32 HP 34 HP 36 HP 38 HP 40 HP 42 HP
Model name RXQ28TAH RXQ30TAH RXQ32TAH RXQ34TAH RXQ36TAH RXQ38TAH RXQ40TAH RXQ42TAH
Outdoor unit 1 RXQ8TA RXQ8TA RXQ8TA RXQ8TA RXQ8TA RXQ12TA RXQ12TA RXQ14TA
Outdoor unit 2 RXQ8TA RXQ10TA RXQ12TA RXQ12TA RXQ14TA RXQ12TA RXQ14TA RXQ14TA
Outdoor unit 3 RXQ12TA RXQ12TA RXQ12TA RXQ14TA RXQ14TA RXQ14TA RXQ14TA RXQ14TA
Capacity range 44 HP 46 HP 48 HP 50 HP
Model name RXQ44TAH RXQ46TAH RXQ48TAH RXQ50TAH
Outdoor unit 1 RXQ14TA RXQ14TA RXQ16TA RXQ16TA
Outdoor unit 2 RXQ14TA RXQ16TA RXQ16TA RXQ16TA
Outdoor unit 3 RXQ16TA RXQ16TA RXQ16TA RXQ18TA
Capacity range 18 HP 20 HP 22 HP 24 HP 26 HP 28 HP 30 HP 32 HP
Model name RXQ18TAN RXQ20TAN RXQ22TAN RXQ24TAN RXQ26TAN RXQ28TAN RXQ30TAN RXQ32TAN
Outdoor unit 1 RXQ8TA RXQ8TA RXQ8TA RXQ10TA RXQ12TA RXQ14TA RXQ14TA RXQ14TA
Outdoor unit 2 RXQ10TA RXQ12TA RXQ14TA RXQ14TA RXQ14TA RXQ14TA RXQ16TA RXQ18TA
Outdoor unit 3 – – – – – – – –
Capacity range 34 HP 36 HP 38 HP 40 HP 42 HP 44 HP 46 HP 48 HP
Model name RXQ34TAN RXQ36TAN RXQ38TAN RXQ40TAN RXQ42TAN RXQ44TAN RXQ46TAN RXQ48TAN
Outdoor unit 1 RXQ10TA RXQ12TA RXQ8TA RXQ12TA RXQ12TA RXQ12TA RXQ14TA RXQ14TA
Outdoor unit 2 RXQ12TA RXQ12TA RXQ12TA RXQ12TA RXQ14TA RXQ16TA RXQ14TA RXQ16TA
Outdoor unit 3 RXQ12TA RXQ12TA RXQ18TA RXQ16TA RXQ16TA RXQ16TA RXQ18TA RXQ18TA
Capacity range 50 HP 52 HP 54 HP 56 HP 58 HP 60 HP
Model name RXQ50TAN RXQ52TAN RXQ54TAN RXQ56TAN RXQ58TAN RXQ60TAN
Outdoor unit 1 RXQ14TA RXQ16TA RXQ18TA RXQ18TA RXQ18TA RXQ20TA
Outdoor unit 2 RXQ18TA RXQ18TA RXQ18TA RXQ18TA RXQ20TA RXQ20TA
Outdoor unit 3 RXQ18TA RXQ18TA RXQ18TA RXQ20TA RXQ20TA RXQ20TA
Capacity range 22 HP 24 HP 26 HP 28 HP 30 HP 32 HP 34 HP 36 HP
Model name RXQ22TAS RXQ24TAS RXQ26TAS RXQ28TAS RXQ30TAS RXQ32TAS RXQ34TAS RXQ36TAS
Outdoor unit 1 RXQ10TA RXQ12TA RXQ8TA RXQ12TA RXQ12TA RXQ12TA RXQ16TA RXQ18TA
Outdoor unit 2 RXQ12TA RXQ12TA RXQ18TA RXQ16TA RXQ18TA RXQ20TA RXQ18TA RXQ18TA
Outdoor unit 3 – – – – – – – –
Capacity range 38 HP 40 HP 42 HP 44 HP 46 HP 48 HP 50 HP
Model name RXQ38TAS RXQ40TAS RXQ42TAS RXQ44TAS RXQ46TAS RXQ48TAS RXQ50TAS
Outdoor unit 1 RXQ18TA RXQ20TA RXQ12TA RXQ12TA RXQ12TA RXQ12TA RXQ12TA
Outdoor unit 2 RXQ20TA RXQ20TA RXQ12TA RXQ12TA RXQ16TA RXQ18TA RXQ18TA
Outdoor unit 3 – – RXQ18TA RXQ20TA RXQ18TA RXQ18TA RXQ20TA
8 General Information
EDMT341410C Model Names of Indoor/Outdoor Units
1
1.3 Air Treatment Equipment
General Information 9
External Appearance EDMT341410C
2. External Appearance
2.1 Indoor Units
VRV Indoor Units
Ceiling mounted cassette (Round flow with sensing) type Ceiling mounted duct type
FXFQ-S FXMQ-P
Ceiling mounted cassette (Round flow) type Ceiling mounted duct type
FXFQ-LU FXMQ-MA
Ceiling mounted cassette (Compact multi flow) type Ceiling suspended type
FXZQ-M FXHQ-MA
FXUQ-A FXAQ-P
Slim ceiling mounted duct type (Compact series) Clean type air conditioner
FXDQ-SP FXBQ-P
FXBPQ-P
FXBQ and FXBPQ models are not available to the Pakistan market.
10 General Information
EDMT341410C External Appearance
FTKJ-N FTKS-F
FDKS and FTKJ models are not available to the Pakistan market.
BP Units
BPMKS967A3 (3 ports)
BPMKS967A2 (2 ports)
General Information 11
External Appearance EDMT341410C
34 HP 36 HP 38 HP
RXQ40TAHYM RXQ42TAHYM
RXQ44TAHYM
RXQ46TAHYM
RXQ48TAHYM
RXQ50TAHYM
12 General Information
EDMT341410C External Appearance
Standard Type
1
6, 8, 10, 12 HP 14, 16 HP 18, 20 HP
General Information 13
External Appearance EDMT341410C
RXQ18TAYM RXQ22TASYM
RXQ20TAYM RXQ24TASYM
RXQ26TASYM RXQ34TASYM
RXQ28TASYM RXQ36TASYM
RXQ30TASYM RXQ38TASYM
RXQ32TASYM RXQ40TASYM
RXQ46TASYM
RXQ42TASYM RXQ48TASYM
RXQ44TASYM RXQ50TASYM
14 General Information
EDMT341410C Combination of Outdoor Units
1
3. Combination of Outdoor Units
High-COP Type
System capacity Number Module Outdoor unit multi connection
kW HP of units 6 8 10 12 14 16 18 piping kit 1
32.0 12 2
38.4 14 2 BHFP22P100
44.8 16 2
48.0 18 3
54.4 20 3
60.8 22 3
67.2 24 3
72.8 26 3
78.3 28 3
83.9 30 3
89.4 32 3
95.9 34 3 BHFP22P151
102 36 3
107 38 3
114 40 3
120 42 3
125 44 3
130 46 3
135 48 3
140 50 3
Note: 1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.
General Information 15
Combination of Outdoor Units EDMT341410C
Standard Type
System capacity Number Module Outdoor unit multi connection
kW HP of units 6 8 10 12 14 16 18 20 piping kit 1
16.0 6 1
22.4 8 1
28.0 10 1
—
33.5 12 1
40.0 14 1
45.0 16 1
50.4 18 2
55.9 20 2
62.4 22 2
68.0 24 2
BHFP22P100
73.5 26 2
80.0 28 2
85.0 30 2
90.0 32 2
95.0 34 3
101 36 3
106 38 3
112 40 3
119 42 3
124 44 3
130 46 3
BHFP22P151
135 48 3
140 50 3
145 52 3
150 54 3
156 56 3
162 58 3
168 60 3
Note: 1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.
16 General Information
EDMT341410C Nomenclature
1
4. Nomenclature
VRV Indoor Unit
F X F Q 25 S VM
Power supply symbol
V1 : 1 phase, 220-240 V, 50 Hz
VE: 1 phase, 220-240/220 V, 50/60 Hz
VEB: 1 phase, 220-240/220-230 V, 50/60 Hz
VM: 1 phase, 220-240/220-230 V, 50/60 Hz
Y1: 3 phase, 380-415 V, 50 Hz
Y16: 3 phase, 380-415 V, 50 Hz
Capacity indication
Conversion to kW (Horsepower)
25: 2.8 kW (1 HP)
125: 14.0 kW (5 HP)
250: 28.0 kW (10 HP)
Refrigerant
Q: R410A
Shape
F: Ceiling mounted cassette (Round flow with sensing / Round flow)
Z: Ceiling mounted cassette (Compact multi flow)
U: 4-way flow ceiling suspended
C: Ceiling mounted cassette (Double flow)
K: Ceiling mounted cassette corner
D: Slim ceiling mounted duct
S: Middle static pressure ceiling mounted duct
M: Ceiling mounted duct
H: Ceiling suspended
A: Wall mounted
L: Floor standing
N: Concealed floor standing
V: Floor standing duct
B: Clean type air conditioner
Series category
X: Inverter
Unit category
F: Indoor unit for air cooled type
General Information 17
Nomenclature EDMT341410C
F T K S 50 B VM A
Standard symbol
A: Australia
M: Malaysia
V: Vietnam
Capacity indication
Rated cooling capacity (kW at 50 Hz) × 10
Type
K: Inverter cooling only
X: Inverter heat pump
Shape
T: Wall mounted
D: Duct connected
Unit category
F: Indoor unit for pair or pair/multi use
C: Indoor unit for multi use
18 General Information
EDMT341410C Nomenclature
1
Outdoor Unit
R X Q 54 TAN Y1 E
E: The unit with anti corrosion treatment
Power supply symbol
YM: 3 phase, 380-415/380 V, 50/60 Hz
Indicates major design category
TAH: High-COP type
TA, TAN: Standard type (Only TA: Single unit)
TA, TAS: Space saving type (Only TA: Single unit)
Capacity indication
Conversion to kW (Horsepower)
6: 16.0 kW (6 HP)
10: 28.0 kW (10 HP)
60: 168 kW (60 HP)
Refrigerant
Q: R410A
Type
Y: Heat pump
Blank: Cooling only
Series category
X: Inverter
Unit category
R: Outdoor unit for air cooled type
V K M 50 GA M V1
V A M 500 GJ VE
Power supply symbol
VE: 1 phase, 220-240/220 V, 50/60 Hz
Indicates major design category
Airflow rate (H) (m3/h)
Mounted type
Air
Ventilation
General Information 19
Capacity Range EDMT341410C
5. Capacity Range
5.1 For VRV Indoor Units Only
5.1.1 Combination Ratio
Note: When outdoor-air processing mode of FXVQ is selected, be sure to connect as follows:
Outdoor unit
HP Indoor unit
ASEAN
5 HP FXVQ125NY1 × 1 RXQ6TAYM × 1
8 HP FXVQ200NY1 × 1 RXQ8TAYM × 1
10 HP FXVQ250NY1 × 1 RXQ10TAYM × 1
16 HP FXVQ400NY1 × 1 RXQ16TAYM × 1
20 HP FXVQ500NY1 × 1 RXQ20TANYM × 1
FXVQ500NY16 × 1
20 General Information
EDMT341410C Capacity Range
General Information 21
Capacity Range EDMT341410C
Standard Type
kW HP Capacity Model name Combination Outdoor unit multi Total capacity index of Maximum number of
index connection piping kit *1 connectable indoor units *2 *3 connectable indoor units *2
16.0 6 HP 150 RXQ6TA RXQ6TA — 75 to 195 (300) 9 (15)
22.4 8 HP 200 RXQ8TA RXQ8TA — 100 to 260 (400) 13 (20)
28.0 10 HP 250 RXQ10TA RXQ10TA — 125 to 325 (500) 16 (25)
33.5 12 HP 300 RXQ12TA RXQ12TA — 150 to 390 (600) 19 (30)
40.0 14 HP 350 RXQ14TA RXQ14TA — 175 to 455 (700) 22 (35)
45.0 16 HP 400 RXQ16TA RXQ16TA — 200 to 520 (800) 26 (40)
50.4 18 HP 450 RXQ18TAN RXQ8TA + RXQ10TA 225 to 585 (720) 29 (36)
55.9 20 HP 500 RXQ20TAN RXQ8TA + RXQ12TA 250 to 650 (800) 32 (40)
62.4 22 HP 550 RXQ22TAN RXQ8TA + RXQ14TA 275 to 715 (880) 35 (44)
68.0 24 HP 600 RXQ24TAN RXQ10TA + RXQ14TA 300 to 780 (960) 39 (48)
BHFP22P100
73.5 26 HP 650 RXQ26TAN RXQ12TA + RXQ14TA 325 to 845 (1,040) 42 (52)
80.0 28 HP 700 RXQ28TAN RXQ14TA × 2 350 to 910 (1,120) 45 (56)
85.0 30 HP 750 RXQ30TAN RXQ14TA + RXQ16TA 375 to 975 (1,200) 48 (60)
90.0 32 HP 800 RXQ32TAN RXQ14TA + RXQ18TA 400 to 1,040 (1,280) 52 (64)
95.0 34 HP 850 RXQ34TAN RXQ10TA + RXQ12TA × 2 425 to 1,105 (1,105) 55 (55)
101 36 HP 900 RXQ36TAN RXQ12TA × 3 450 to 1,170 (1,170) 58 (58)
106 38 HP 950 RXQ38TAN RXQ8TA + RXQ12TA + RXQ18TA 475 to 1,235 (1,235) 61 (61)
112 40 HP 1,000 RXQ40TAN RXQ12TA × 2 + RXQ16TA 500 to 1,300 (1,300)
119 42 HP 1,050 RXQ42TAN RXQ12TA + RXQ14TA + RXQ16TA 525 to 1,365 (1,365)
124 44 HP 1,100 RXQ44TAN RXQ12TA + RXQ16TA × 2 550 to 1,430 (1,430)
130 46 HP 1,150 RXQ46TAN RXQ14TA × 2 + RXQ18TA 575 to 1,495 (1,495)
BHFP22P151
135 48 HP 1,200 RXQ48TAN RXQ14TA + RXQ16TA + RXQ18TA 600 to 1,560 (1,560)
140 50 HP 1,250 RXQ50TAN RXQ14TA + RXQ18TA × 2 625 to 1,625 (1,625) 64 (64)
145 52 HP 1,300 RXQ52TAN RXQ16TA + RXQ18TA × 2 650 to 1,690 (1,690)
150 54 HP 1,350 RXQ54TAN RXQ18TA × 3 675 to 1,755 (1,755)
156 56 HP 1,400 RXQ56TAN RXQ18TA × 2 + RXQ20TA 700 to 1,820 (1,820)
162 58 HP 1,450 RXQ58TAN RXQ18TA + RXQ20TA × 2 725 to 1,885 (1,885)
168 60 HP 1,500 RXQ60TAN RXQ20TA × 3 750 to 1,950 (1,950)
Notes: *1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.
*2. Values inside brackets are based on connection of indoor units rated at maximum capacity, 200% for
single outdoor units, 160% for double outdoor units, and 130% for triple outdoor units.
*3. When outdoor-air processing units (FXMQ-MF) and standard indoor units are connected, the total
connection capacity of the outdoor-air processing units (FXMQ-MF) must not exceed 30% of the
capacity index of the outdoor units. And the connection ratio must not exceed 100%.
22 General Information
EDMT341410C Capacity Range
General Information 23
Capacity Range EDMT341410C
Standard Type
Types of connected indoor units
Including FXFQ25LU,
FXDQ, FXSQ, FXMQ-P, FXFQ25S and FXVQ at Other indoor unit models
Capacity Model Min. FXAQ, FXBQ, FXBPQ
Type HP index name least one unit
combination
ratio Max. Max. number Max. Max. number Max. Max. number
combination of connectable combination of connectable combination of connectable
ratio indoor units ratio indoor units ratio indoor units
6 150 RXQ6TA 15 9 15
8 200 RXQ8TA 20 13 20
Single 10 250 RXQ10TA 25 16 25
outdoor 200%
units 12 300 RXQ12TA 30 19 30
14 350 RXQ14TA 35 22 35
16 400 RXQ16TA 40 26 40
18 450 RXQ18TAN 45 29 36
20 500 RXQ20TAN 50 32 40
22 550 RXQ22TAN 55 35 44
Double 24 600 RXQ24TAN 60 39 48
outdoor 160%
units 26 650 RXQ26TAN 42 52
28 700 RXQ28TAN 45 56
30 750 RXQ30TAN 48 60
32 800 RXQ32TAN 52 64
50% 200% 130%
34 850 RXQ34TAN 55 55
36 900 RXQ36TAN 58 58
38 950 RXQ38TAN 61 61
40 1,000 RXQ40TAN
42 1,050 RXQ42TAN
64
44 1,100 RXQ44TAN
Triple 46 1,150 RXQ46TAN
outdoor 130%
units 48 1,200 RXQ48TAN
50 1,250 RXQ50TAN 64 64
52 1,300 RXQ52TAN
54 1,350 RXQ54TAN
56 1,400 RXQ56TAN
58 1,450 RXQ58TAN
60 1,500 RXQ60TAN
Note: If the operational capacity of indoor units is more than 130%, low airflow operation is enforced in all the
indoor units.
24 General Information
EDMT341410C Capacity Range
General Information 25
Capacity Range EDMT341410C
5.2 For a System with Residential Indoor Units or VRV Mix Combination
5.2.1 Combination Ratio
26 General Information
EDMT341410C Selection Procedure
1
6. Selection Procedure
6.1 Selection Procedure
6.1.1 Flowchart
Given Conditions:
· Design temperature and humidity (indoor & outdoor)
[1]] Given conditions · Required heat load of each room
· System peak load ( if necessary)
· Piping length, level difference
· Specifications of indoor units (type and number)
Define safety factor for the indoor units and outdoor unit
[2]] Selection of indoor units
Indoor unit capacity corrected for indoor air temperature (WB) ≥ Required heat load × Safety factor for the indoor units
1) Use the sum of the peak load of each room 2) Use the system peak load
Provisionally select outdoor unit type and size based on limitation of combination ratio
Confirm that the number of indoor units connected to the outdoor unit is within limitation.
Correct for cooling & heating capacity of the outdoor unit by the following items
-Outdoor air temperature -Piping length, level difference
-Indoor air temperature -Piping heat loss
-Combination ratio -Safety factor for the outdoor unit
No
Corrected capacity of the outdoor unit ≥ Required total heat load to the outdoor unit
Yes
Room B Room E
Room C Room D
Floor plan
-Determine peak load of each room (and system peak load if necessary)
General Information 27
Selection Procedure EDMT341410C
-Safety factor
In this example, safety factor is not used. (i. e., safety factor = 1.0)
Selected IDU FXMQ125PVE FXMQ125PVE FXMQ50PVE FXMQ50PVE FXMQ100PVE FXMQ100PVE FXMQ40PVE FXMQ40PVE
Corrected TC
13.8 13.8 5.5 5.5 11.0 11.0 4.4 4.4
(kW)
∗In case of selection based on Total Heat Load and Sensible Heat Load, select indoor units which satisfy not
only the Total Heat Load but also the Sensible Heat Load of each room. The sensible heat capacity of
indoor units is to be corrected for indoor air temperature. If the design temperature of indoor air falls
between temperatures listed in table, calculate sensible heat capacity by using the bypass factor calculated
by interpolation for each indoor air temperature.
28 General Information
EDMT341410C Selection Procedure
-Using the capacity table of the outdoor unit, calculate the capacity (B) corrected for outdoor air temperature, indoor
air temperature, and combination ratio.
General Information 29
Selection Procedure EDMT341410C
-Confirm capacity correction factor by piping length and level difference (K1)
(K1) = 0.898
0.898
In cooling mode, heat loss factor per meter at 33°C is calculated as below.
Heat loss factor per meter = 0.022 + (0.030 – 0.022) × (33 – 30) / (35 – 30) = 0.0268
Using “Equivalent piping length = 60 m” and “Heat loss factor per meter = 0.0268”,
(K2) = 1 + (0.0268 × (60 – 7.5)) / 100 = 1.014
Cooling Ambient temperature
Heat loss factor per 5°C 10°C 15°C 20°C 25°C 30°C 35°C 40°C
meter of piping (%) 0.000 0.000 0.004 0.009 0.014 0.022 0.030 0.038
If the corrected capacity (C) is the same or greater than the required total heat load (A), selection is complete.
If (C) < (A), return to Procedure [3]–2 and provisionally select a larger outdoor unit.
30 General Information
EDMT341410C
Part 2
Indoor Units
FXFQ-S
Ceiling Mounted Cassette
(Round Flow with Sensing) Type . . . . . . . . . . . . . 33
FXFQ-LU
Ceiling Mounted Cassette
(Round Flow) Type . . . . . . . . . . . . . . . . . . . . . . . . 51
FXZQ-M
Ceiling Mounted Cassette
(Compact Multi Flow) Type . . . . . . . . . . . . . . . . . . 69
FXUQ-A
4-Way Flow Ceiling Suspended Type . . . . . . . . . . 87
FXCQ-M
Ceiling Mounted Cassette
(Double Flow) Type . . . . . . . . . . . . . . . . . . . . . . . . 97
FXKQ-MA
Ceiling Mounted Cassette Corner Type . . . . . . . 115
FXDQ-PB / FXDQ-NB
Slim Ceiling Mounted Duct Type
(Standard Series) . . . . . . . . . . . . . . . . . . . . . . . . 129
FXDQ-SP
Slim Ceiling Mounted Duct Type
(Compact Series). . . . . . . . . . . . . . . . . . . . . . . . . 153
FXSQ-P
Middle Static Pressure
Ceiling Mounted Duct Type. . . . . . . . . . . . . . . . . 175
FXMQ-P
Ceiling Mounted Duct Type. . . . . . . . . . . . . . . . . 215
Indoor Units 31
EDMT341410C
FXMQ-MA
Ceiling Mounted Duct Type. . . . . . . . . . . . . . . . . 253
FXHQ-MA
Ceiling Suspended Type . . . . . . . . . . . . . . . . . . . 267
FXAQ-P
Wall Mounted Type . . . . . . . . . . . . . . . . . . . . . . . 281
FXLQ-MA / FXNQ-MA
Floor Standing Type /
Concealed Floor Standing Type . . . . . . . . . . . . . 297
FXVQ-N
Floor Standing Duct Type . . . . . . . . . . . . . . . . . . 321
FXBQ-P / FXBPQ-P
Clean Type Air Conditioner . . . . . . . . . . . . . . . . . 369
32 Indoor Units
EDMT341410C
FXFQ-S
Ceiling Mounted Cassette
2
1. Specifications ........................................................................................34
2. Dimensions ...........................................................................................36
3. Piping Diagrams....................................................................................39
4. Wiring Diagrams....................................................................................40
5. Electric Characteristics..........................................................................41
6. Safety Devices Setting ..........................................................................42
7. Capacity Tables ....................................................................................43
7.1 Cooling Capacity for Te: Auto ................................................................43
7.2 Cooling Capacity for Te: 9°C..................................................................43
8. Sound Levels ........................................................................................44
9. Centre of Gravity ...................................................................................48
10.Accessories...........................................................................................49
10.1 Optional Accessories (for Unit)...............................................................49
10.2 Optional Accessories (for Controls)........................................................49
FXFQ-S 33
Specifications EDMT341410C
1. Specifications
Ceiling mounted cassette (Round flow with sensing) type
Model FXFQ25SVM FXFQ32SVM FXFQ40SVM FXFQ50SVM
1 phase, 1 phase, 1 phase, 1 phase,
Power supply 220-240/220 · 230 V, 220-240/220 · 230 V, 220-240/220 · 230 V, 220-240/220 · 230 V,
50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
kcal/h 2,400 3,100 3,900 4,800
1 2 Cooling capacity Btu/h 9,600 12,300 15,400 19,100
kW 2.8 3.6 4.5 5.6
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 246×840×840 246×840×840 246×840×840 246×840×840
Model QTS48C15M QTS48C15M QTS48C15M QTS48C15M
Type Turbo fan Turbo fan Turbo fan Turbo fan
Motor output ×
W 48×1 48×1 48×1 48×1
Number of units
Fan
m³/min 12.5/11.5/10.0 12.5/11.5/10.0 14.5/13.0/11.0 22.0/17.5/13.5
Airflow rate (H/M/L) l/s 208/192/167 208/192/167 242/217/183 367/292/225
cfm 441/406/353 441/406/353 512/459/388 777/618/477
Drive Direct drive Direct drive Direct drive Direct drive
Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
Temperature control
for cooling and heating for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Polyurethane form Polyurethane form Polyurethane form Polyurethane form
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Piping
connections Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mm VP25 (External dia. 32) VP25 (External dia. 32) VP25 (External dia. 32) VP25 (External dia. 32)
Mass kg 19 19 19 23
3 Sound pressure level (H/M/L) dB(A) 30.0/28.5/27.0 30.0/28.5/27.0 31.0/29.0/27.0 36.0/32.0/28.0
Safety devices Fuse Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYCQ125B-W1 BYCQ125B-W1 BYCQ125B-W1 BYCQ125B-W1
Colour Fresh white Fresh white Fresh white Fresh white
Decoration
panels Dimensions: (H×W×D) mm 50×950×950 50×950×950 50×950×950 50×950×950
(Option) Resin net Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 5.5 5.5 5.5 5.5
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Installation manual, Installation manual, Installation manual,
Installation pattern paper, Installation pattern paper, Installation pattern paper, Installation pattern paper,
Drain hose, Metal clamp, Drain hose, Metal clamp, Drain hose, Metal clamp, Drain hose, Metal clamp,
Standard accessories Washer clamp, Sealing Washer clamp, Sealing Washer clamp, Sealing Washer clamp, Sealing
material, Clamp, Screw, material, Clamp, Screw, material, Clamp, Screw, material, Clamp, Screw,
Washer for hanger, Joint Washer for hanger, Joint Washer for hanger, Joint Washer for hanger, Joint
insulating material, insulating material, insulating material, insulating material,
Installation guide Installation guide Installation guide Installation guide
Specification C: 3D084443A C: 3D084443A C: 3D084443A C: 3D084443A
Drawing No.
Sound level C: 4D084359 C: 4D084359 C: 4D084360 C: 4D084361
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are Btu/h=kW×3412
cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
34 FXFQ-S
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
FXFQ-S 35
Dimensions EDMT341410C
2. Dimensions
FXFQ25SVM / FXFQ32SVM / FXFQ40SVM / FXFQ50SVM
3D084388
Unit: mm
36 FXFQ-S
EDMT341410C Dimensions
FXFQ63SVM / FXFQ80SVM
2
3D084389
Unit: mm
FXFQ-S 37
Dimensions EDMT341410C
FXFQ100SVM / FXFQ125SVM
3D084390
Unit: mm
38 FXFQ-S
EDMT341410C Piping Diagrams
3. Piping Diagrams
2
FXFQ25SVM / FXFQ32SVM / FXFQ40SVM / FXFQ50SVM / FXFQ63SVM / FXFQ80SVM / FXFQ100SVM /
FXFQ125SVM
4D024460M
FXFQ-S 39
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXFQ25SVM / FXFQ32SVM / FXFQ40SVM / FXFQ50SVM / FXFQ63SVM / FXFQ80SVM /
FXFQ100SVM / FXFQ125SVM
3D084349
40 FXFQ-S
EDMT341410C Electric Characteristics
5. Electric Characteristics
2
FXFQ25SVM / FXFQ32SVM / FXFQ40SVM / FXFQ50SVM / FXFQ63SVM / FXFQ80SVM /
FXFQ100SVM / FXFQ125SVM
4D084422
FXFQ-S 41
Safety Devices Setting EDMT341410C
42 FXFQ-S
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto 2
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXFQ25SVM 25 2.5 2.5 2.6 2.6 2.8 2.8 2.8 2.5 2.8 2.5 2.9 2.4 3.0 2.4
FXFQ32SVM 32 3.2 2.9 3.4 3.0 3.5 3.1 3.6 2.9 3.6 2.8 3.7 2.7 3.8 2.6
FXFQ40SVM 40 4.0 3.5 4.2 3.6 4.4 3.7 4.5 3.4 4.6 3.3 4.7 3.2 4.8 3.1
FXFQ50SVM 50 4.9 4.8 5.3 5.2 5.5 5.5 5.6 5.0 5.7 4.9 5.8 4.8 5.9 4.7
FXFQ63SVM 63 6.3 5.6 6.7 6.0 7.0 6.4 7.1 5.9 7.2 5.8 7.3 5.6 7.5 5.5
FXFQ80SVM 80 7.9 6.4 8.5 6.8 8.8 7.2 9.0 6.7 9.1 6.6 9.3 6.4 9.5 6.2
FXFQ100SVM 100 9.9 8.3 10.5 9.0 11.0 9.5 11.2 8.8 11.3 8.7 11.6 8.4 11.8 8.1
FXFQ125SVM 125 12.3 9.7 13.2 10.4 13.8 10.9 14.0 10.2 14.2 10.0 14.5 9.7 14.8 9.3
FXFQ-S 43
Sound Levels EDMT341410C
8. Sound Levels
FXFQ25SVM / FXFQ32SVM
4D084359
FXFQ40SVM
4D084360
44 FXFQ-S
EDMT341410C Sound Levels
FXFQ50SVM
2
4D084361
FXFQ63SVM
4D084362
FXFQ-S 45
Sound Levels EDMT341410C
FXFQ80SVM
4D084363
FXFQ100SVM
4D084364
46 FXFQ-S
EDMT341410C Sound Levels
FXFQ125SVM
2
4D084365
FXFQ-S 47
Centre of Gravity EDMT341410C
9. Centre of Gravity
FXFQ25SVM / FXFQ32SVM / FXFQ40SVM / FXFQ50SVM / FXFQ63SVM / FXFQ80SVM /
FXFQ100SVM / FXFQ125SVM
Unit: mm
C: 4D052237R
48 FXFQ-S
EDMT341410C Accessories
10. Accessories
10.1 Optional Accessories (for Unit) 2
Model
Item Note
FXFQ25SVM FXFQ32SVM FXFQ40SVM FXFQ50SVM FXFQ63SVM FXFQ80SVM FXFQ100SVM FXFQ125SVM
Decoration panel BYCQ125B-W1
Sealing member of air discharge KDBHQ55B140
outlet
Panel spacer KDBP55H160FA
High 65% KAFP556C80 KAFP556C160
efficiency filter
unit 90% KAFP557C80 KAFP557C160
Replacement 65% KAFP552B80 KAFP552B160
high efficiency
filter 90% KAFP553B80 KAFP553B160
Filter
related Filter chamber KDDFP55C160
Replacement long-life filter KAFP551K160
Ultra long-life filter unit KAFP55C160
Replacement ultra long-life
filter KAFP55H160H
Without T-
1, 2 KDDQ55B140 (Components: KDDP55C160-1, KDDQ55B140-2)
duct joint
Fresh air Chamber type With T-
intake kit 1, 2 KDDP55B160K (Components: KDDP55C160-1, KDDP55B160K2)
duct joint
Direct installation type KDDP55X160A
Branch duct chamber KDJP55B80 KDJP55B160
Insulation kit for high humidity KDTP55K80 KDTP55K160
C: 3D084501C
Notes:
1. Two of four corner air outlets are closed Without T-duct joint. Fresh air intake volume is 10% or less of airflow rate.
2. Please order using the names of both components instead of set name.
FXFQ-S 49
Accessories EDMT341410C
50 FXFQ-S
EDMT341410C
FXFQ-LU
Ceiling Mounted Cassette
(Round Flow) Type
3
1. Specifications ........................................................................................52
2. Dimensions ...........................................................................................54
3. Piping Diagrams....................................................................................57
4. Wiring Diagrams....................................................................................58
5. Electric Characteristics..........................................................................59
6. Safety Devices Setting ..........................................................................60
7. Capacity Tables ....................................................................................61
7.1 Cooling Capacity for Te: Auto ................................................................61
7.2 Cooling Capacity for Te: 9°C..................................................................61
8. Sound Levels ........................................................................................62
9. Centre of Gravity ...................................................................................66
10.Accessories...........................................................................................67
10.1 Optional Accessories (for Unit)...............................................................67
10.2 Optional Accessories (for Controls)........................................................67
FXFQ-LU 51
Specifications EDMT341410C
1. Specifications
Ceiling mounted cassette (Round flow) type
Model FXFQ25LUV1 FXFQ32LUV1 FXFQ40LUV1 FXFQ50LUV1
Power supply 1 phase, 220-240 V, 50 Hz 1 phase, 220-240 V, 50 Hz 1 phase, 220-240 V, 50 Hz 1 phase, 220-240 V, 50 Hz
kcal/h 2,400 3,100 3,900 4,800
1 2 Cooling capacity Btu/h 9,600 12,300 15,400 19,100
kW 2.8 3.6 4.5 5.6
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 246×840×840 246×840×840 246×840×840 246×840×840
Model QTS48C15M QTS48C15M QTS48C15M QTS48C15M
Type Turbo fan Turbo fan Turbo fan Turbo fan
Motor output ×
Number of units W 56×1 56×1 56×1 56×1
Fan
m³/min 13/11.5/10 13/11.5/10 15/13/11 16/13.5/11
Airflow rate (HH/H/L)
cfm 459/406/353 459/406/353 530/459/388 565/477/388
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
for cooling and heating for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Polyurethane form Polyurethane form Polyurethane form Polyurethane form
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Piping
connections VP25 VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 19.5 19.5 19.5 19.5
3 Sound pressure level (HH/H/L) dB(A) 30/28.5/27 30/28.5/27 31/29/27 32/29.5/27
Safety devices Fuse Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYCP125K-W1 BYCP125K-W1 BYCP125K-W1 BYCP125K-W1
Panel colour Fresh white Fresh white Fresh white Fresh white
Decoration
panels Dimensions: (H×W×D) mm 50×950×950 50×950×950 50×950×950 50×950×950
(Option) Resin net Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 5.5 5.5 5.5 5.5
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Paper Installation manual, Paper Installation manual, Paper Installation manual, Paper
pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain
hose, Clamp metal, Washer hose, Clamp metal, Washer hose, Clamp metal, Washer hose, Clamp metal, Washer
Standard accessories fixing plate, Sealing pads,
fixing plate, Sealing pads, fixing plate, Sealing pads, fixing plate, Sealing pads,
Clamps, Screws, Washer for Clamps, Screws, Washer for Clamps, Screws, Washer for Clamps, Screws, Washer for
hanging bracket, Insulation hanging bracket, Insulation hanging bracket, Insulation hanging bracket, Insulation
for fitting, Installation guide for fitting, Installation guide for fitting, Installation guide for fitting, Installation guide
Specification C: 3D081322 C: 3D081322 C: 3D081322 C: 3D081322
Drawing No.
Sound level C: 4D060231D C: 4D060231D C: 4D060232D C: 4D060233D
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are Btu/h=kW×3412
cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions.
4. Refer to Electric Characteristics for the power input.
52 FXFQ-LU
EDMT341410C Specifications
1 2 Cooling capacity
kcal/h
Btu/h
6,100
24,200
7,700
30,700
9,600
38,200
12,000
47,800
3
kW 7.1 9.0 11.2 14.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 246×840×840 246×840×840 288×840×840 288×840×840
Model QTS48C15M QTS48C15M QTS48C15M QTS48C15M
Type Turbo fan Turbo fan Turbo fan Turbo fan
Motor output ×
Number of units W 56×1 56×1 120×1 120×1
Fan
m³/min 19/16.5/13.5 21/18/15 32/26/20 33/28/22.5
Airflow rate (HH/H/L)
cfm 671/583/477 742/636/530 1,130/918/706 1,165/989/794
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
for cooling and heating for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Polyurethane form Polyurethane form Polyurethane form Polyurethane form
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Piping
connections VP25 VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 22 22 25 25
3 Sound pressure level (HH/H/L) dB(A) 34/31/28 36/33.5/31 43/37.5/32 44/39/34
Safety devices Fuse Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYCP125K-W1 BYCP125K-W1 BYCP125K-W1 BYCP125K-W1
Panel colour Fresh white Fresh white Fresh white Fresh white
Decoration
panels Dimensions: (H×W×D) mm 50×950×950 50×950×950 50×950×950 50×950×950
(Option) Resin net Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 5.5 5.5 5.5 5.5
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Paper Installation manual, Paper Installation manual, Paper Installation manual, Paper
pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain
hose, Clamp metal, Washer hose, Clamp metal, Washer hose, Clamp metal, Washer hose, Clamp metal, Washer
Standard accessories fixing plate, Sealing pads,
fixing plate, Sealing pads, fixing plate, Sealing pads, fixing plate, Sealing pads,
Clamps, Screws, Washer for Clamps, Screws, Washer for Clamps, Screws, Washer for Clamps, Screws, Washer for
hanging bracket, Insulation hanging bracket, Insulation hanging bracket, Insulation hanging bracket, Insulation
for fitting, Installation guide for fitting, Installation guide for fitting, Installation guide for fitting, Installation guide
Specification C: 3D081322 C: 3D081322 C: 3D081322 C: 3D081322
Drawing No.
Sound level C: 4D060234E C: 4D060235D C: 4D060236C C: 4D060237D
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions.
4. Refer to Electric Characteristics for the power input.
FXFQ-LU 53
Dimensions EDMT341410C
2. Dimensions
FXFQ25LUV1 / FXFQ32LUV1 / FXFQ40LUV1 / FXFQ50LUV1
3D081556A
Unit: mm
54 FXFQ-LU
EDMT341410C Dimensions
FXFQ63LUV1 / FXFQ80LUV1
3D078813F
Unit: mm
FXFQ-LU 55
Dimensions EDMT341410C
FXFQ100LUV1 / FXFQ125LUV1
Unit: mm
3D078815F
56 FXFQ-LU
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXFQ25LUV1 / FXFQ32LUV1 / FXFQ40LUV1 / FXFQ50LUV1 / FXFQ63LUV1 / FXFQ80LUV1 /
FXFQ100LUV1 / FXFQ125LUV1 3
4D024460M
FXFQ-LU 57
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXFQ25LUV1 / FXFQ32LUV1 / FXFQ40LUV1 / FXFQ50LUV1 / FXFQ63LUV1 / FXFQ80LUV1 /
FXFQ100LUV1 / FXFQ125LUV1
3D080879
58 FXFQ-LU
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXFQ25LUV1 / FXFQ32LUV1 / FXFQ40LUV1 / FXFQ50LUV1 / FXFQ63LUV1 / FXFQ80LUV1 /
FXFQ100LUV1 / FXFQ125LUV1 3
4D060238H
FXFQ-LU 59
Safety Devices Setting EDMT341410C
60 FXFQ-LU
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB 3
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXFQ25LUV1 25 2.5 2.5 2.6 2.6 2.8 2.8 2.8 2.8 2.8 2.8 2.9 2.7 3.0 2.6
FXFQ32LUV1 32 3.2 3.0 3.4 3.2 3.5 3.4 3.6 3.1 3.6 3.1 3.7 3.1 3.8 3.0
FXFQ40LUV1 40 4.0 3.5 4.2 3.8 4.4 4.1 4.5 3.8 4.6 3.7 4.7 3.6 4.8 3.5
FXFQ50LUV1 50 4.9 4.1 5.3 4.4 5.5 4.7 5.6 4.4 5.7 4.4 5.8 4.2 5.9 4.1
FXFQ63LUV1 63 6.3 5.1 6.7 5.4 7.0 5.8 7.1 5.6 7.2 5.5 7.3 5.4 7.5 5.2
FXFQ80LUV1 80 7.9 6.1 8.5 6.5 8.8 6.9 9.0 6.6 9.1 6.6 9.3 6.4 9.5 6.2
FXFQ100LUV1 100 9.9 8.2 10.5 8.9 11.0 9.4 11.2 8.9 11.3 8.8 11.6 8.5 11.8 8.3
FXFQ125LUV1 125 12.3 9.5 13.2 10.2 13.8 10.7 14.0 10.3 14.2 10.2 14.5 9.9 14.8 9.5
FXFQ-LU 61
Sound Levels EDMT341410C
8. Sound Levels
FXFQ25LUV1 / FXFQ32LUV1
4D060231D
FXFQ40LUV1
4D060232D
62 FXFQ-LU
EDMT341410C Sound Levels
FXFQ50LUV1
4D060233D
3
FXFQ63LUV1
4D060234E
FXFQ-LU 63
Sound Levels EDMT341410C
FXFQ80LUV1
4D060235D
FXFQ100LUV1
4D060236C
64 FXFQ-LU
EDMT341410C Sound Levels
FXFQ125LUV1
4D060237D
3
FXFQ-LU 65
Centre of Gravity EDMT341410C
9. Centre of Gravity
FXFQ25LUV1 / FXFQ32LUV1 / FXFQ40LUV1 / FXFQ50LUV1 / FXFQ63LUV1 / FXFQ80LUV1 /
FXFQ100LUV1 / FXFQ125LUV1
Unit: mm
C: 4D052237R
66 FXFQ-LU
EDMT341410C Accessories
10. Accessories
10.1 Optional Accessories (for Unit)
Model
Item Note
FXFQ25LUV1 FXFQ32LUV1 FXFQ40LUV1 FXFQ50LUV1 FXFQ63LUV1 FXFQ80LUV1 FXFQ100LUV1 FXFQ125LUV1 3
Decoration panel BYCP125K-W1
Sealing member of air discharge KDBH55K160F
outlet
Panel spacer KDBP55H160FA
High 65% KAFP556C80 KAFP556C160
efficiency
filter unit 90% KAFP557C80 KAFP557C160
Replacement 65% KAFP552B80 KAFP552B160
high efficiency
filter 90% KAFP553B80 KAFP553B160
Filter Filter chamber KDDFP55C160
related
Replacement long-life
KAFP551K160
filter
Ultra long-life filter unit KAFP55C160
Replacement ultra long-
KAFP55H160H
life filter
Without T-
1 KDDP55B160 (Components: KDDP55C160-1, KDDP55B160-2)
Chamber duct joint
Fresh air type
intake kit With T- 1 KDDP55B160K (Components: KDDP55C160-1, KDDP55B160K2)
duct joint
Direct installation type KDDP55X160A
Branch duct chamber KDJP55B80 KDJP55B160
Chamber connection kit KKSJ55KA160
Insulation kit for high humidity KDTP55K80 KDTP55K160
C: 3D081321A
Note:
1. Please order using the names of both components instead of set name.
FXFQ-LU 67
Accessories EDMT341410C
68 FXFQ-LU
EDMT341410C
FXZQ-M
Ceiling Mounted Cassette
(Compact Multi Flow) Type
4
1. Specifications ........................................................................................70
2. Dimensions ...........................................................................................72
3. Piping Diagrams....................................................................................73
4. Wiring Diagrams....................................................................................74
5. Electric Characteristics..........................................................................75
6. Safety Devices Setting ..........................................................................76
7. Capacity Tables ....................................................................................77
7.1 Cooling Capacity for Te: Auto ................................................................77
7.2 Cooling Capacity for Te: 9°C..................................................................77
8. Air Velocity and Temperature Distributions (Reference Data) ..............78
8.1 Cooling ...................................................................................................78
9. Sound Levels ........................................................................................80
9.1 230 V, 50 Hz...........................................................................................80
9.2 240 V, 50 Hz...........................................................................................82
10.Centre of Gravity ...................................................................................84
11.Accessories...........................................................................................85
11.1 Optional Accessories (for Unit)...............................................................85
11.2 Optional Accessories (for Controls)........................................................85
FXZQ-M 69
Specifications EDMT341410C
1. Specifications
Ceiling mounted cassette (Compact multi flow) type
Model FXZQ20MVE FXZQ25MVE FXZQ32MVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 1,900 2,400 3,100
1 2 Cooling capacity Btu/h 7,500 9,600 12,300
kW 2.2 2.8 3.6
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 286×575×575 286×575×575 286×575×575
Model QTS32C15M QTS32C15M QTS32C15M
Type Turbo fan Turbo fan Turbo fan
Motor output ×
W 55×1 55×1 55×1
Number of units
Fan
m³/min 9.0/7.0 9.0/7.0 9.5/7.5
Airflow rate (H/L) l/s 150/116 150/116 158/125
cfm 318/247 318/247 335/265
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat for Microprocessor thermostat for Microprocessor thermostat for
Temperature control
cooling and heating cooling and heating cooling and heating
Foamed polystyrene/ Foamed polystyrene/ Foamed polystyrene/
Sound absorbing thermal insulation material
Foamed polyethylene Foamed polyethylene Foamed polyethylene
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Piping
connections VP20 VP20 VP20
Drain pipe mm
( External dia. 26
Internal dia. 20 ) ( External dia. 26
Internal dia. 20 ) ( External dia. 26
Internal dia. 20 )
Mass kg 18 18 18
3 Sound pressure level 230 V, 50 Hz 30/25 30/25 32/26
(H/L) dB(A)
240 V, 50 Hz 32/26 32/26 34/28
Printed circuit board fuse, Printed circuit board fuse, Printed circuit board fuse,
Safety devices
Fan motor thermal protector Fan motor thermal protector Fan motor thermal protector
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYFQ60B3W1 BYFQ60B3W1 BYFQ60B3W1
Panel colour White (6.5Y9.5/0.5) White (6.5Y9.5/0.5) White (6.5Y9.5/0.5)
Decoration
panels Dimensions: (H×W×D) mm 55×700×700 55×700×700 55×700×700
(Option) Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 2.7 2.7 2.7
Operation manual, Installation manual, Operation manual, Installation manual, Operation manual, Installation manual,
Paper pattern for installation, Drain Paper pattern for installation, Drain Paper pattern for installation, Drain
hose, Clamp metal, Washer fixing hose, Clamp metal, Washer fixing hose, Clamp metal, Washer fixing
Standard accessories plate, Sealing pads, Clamps, Screws,
plate, Sealing pads, Clamps, Screws, plate, Sealing pads, Clamps, Screws,
Washer for hanging bracket, Insulation Washer for hanging bracket, Insulation Washer for hanging bracket, Insulation
for fitting for fitting for fitting
Specification C: 3D038929C C: 3D038929C C: 3D038929C
Drawing No. Sound 230 V, 50 Hz C: 4D040274A C: 4D040274A C: 4D040285A
level 240 V, 50 Hz C: 4D040492A C: 4D040492A C: 4D040491A
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. cfm=m³/min×35.3
During actual operation, these values are normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
70 FXZQ-M
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. cfm=m³/min×35.3
During actual operation, these values are normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
FXZQ-M 71
Dimensions EDMT341410C
2. Dimensions
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
Unit: mm
C: 3D039005E
72 FXZQ-M
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
4D040157B
FXZQ-M 73
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
C: 3D064843
74 FXZQ-M
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
C: 4D040159B
FXZQ-M 75
Safety Devices Setting EDMT341410C
76 FXZQ-M
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
4
FXZQ20MVE 20 1.9 1.7 2.1 1.8 2.2 1.8 2.2 1.7 2.2 1.6 2.3 1.5 2.3 1.4
FXZQ25MVE 25 2.5 2.0 2.6 2.1 2.8 2.2 2.8 2.0 2.8 1.9 2.9 1.8 3.0 1.7
FXZQ32MVE 32 3.2 2.6 3.4 2.5 3.5 2.6 3.6 2.4 3.6 2.2 3.7 2.2 3.8 2.1
FXZQ40MVE 40 4.0 3.1 4.2 3.3 4.4 3.5 4.5 3.3 4.6 3.2 4.7 3.1 4.8 2.9
FXZQ50MVE 50 4.9 3.9 5.3 4.2 5.5 4.4 5.6 4.1 5.7 4.1 5.8 3.9 5.9 3.7
FXZQ-M 77
Air Velocity and Temperature Distributions (Reference Data) EDMT341410C
4D039738D
FXZQ32MVE (Cooling)
4D040188A
78 FXZQ-M
EDMT341410C Air Velocity and Temperature Distributions (Reference Data)
FXZQ40MVE (Cooling)
4D040189A
FXZQ50MVE (Cooling)
4D040190A
FXZQ-M 79
Sound Levels EDMT341410C
9. Sound Levels
9.1 230 V, 50 Hz
FXZQ20MVE / FXZQ25MVE
4D040274A
FXZQ32MVE
4D040285A
80 FXZQ-M
EDMT341410C Sound Levels
FXZQ40MVE
4D040286A
4
FXZQ50MVE
4D040287A
FXZQ-M 81
Sound Levels EDMT341410C
9.2 240 V, 50 Hz
FXZQ20MVE / FXZQ25MVE
4D040492A
FXZQ32MVE
4D040491A
82 FXZQ-M
EDMT341410C Sound Levels
FXZQ40MVE
4D040490A
4
FXZQ50MVE
4D040293A
FXZQ-M 83
Centre of Gravity EDMT341410C
4D040158A
84 FXZQ-M
EDMT341410C Accessories
11. Accessories
11.1 Optional Accessories (for Unit)
Model
Item
FXZQ20MVE FXZQ25MVE FXZQ32MVE FXZQ40MVE FXZQ50MVE
Decoration panel BYFQ60B3W1
Sealing material of air discharge outlet KDBH44BA60
4
Panel spacer KDBQ44BA60A
Replacement long-life filter KAFQ441BA60
Fresh air
Direct installation type KDDQ44XA60
intake kit
C: 3D038933B
FXZQ-M 85
Accessories EDMT341410C
86 FXZQ-M
EDMT341410C
FXUQ-A
4-Way Flow Ceiling Suspended Type
1. Specifications ........................................................................................88
2. Dimensions ...........................................................................................89 5
3. Piping Diagrams....................................................................................90
4. Wiring Diagrams....................................................................................91
5. Electric Characteristics..........................................................................92
6. Safety Devices Setting ..........................................................................93
7. Capacity Tables ....................................................................................94
7.1 Cooling Capacity for Te: Auto ................................................................94
7.2 Cooling Capacity for Te: 9°C..................................................................94
8. Sound Levels ........................................................................................95
9. Accessories...........................................................................................96
9.1 Optional Accessories (for Unit)...............................................................96
9.2 Optional Accessories (for Controls)........................................................96
FXUQ-A 87
Specifications EDMT341410C
1. Specifications
4-way flow ceiling suspended type
Model FXUQ71AVEB FXUQ100AVEB
Power supply 1 phase, 220-240/220-230 V, 50/60 Hz 1 phase, 220-240/220-230 V, 50/60 Hz
kcal/h 6,900 9,600
1 2 Cooling capacity Btu/h 27,300 38,200
kW 8.0 11.2
Casing colour Fresh white Fresh white
Dimensions: (H×W×D) mm 198×950×950 198×950×950
Model QTS48D11M QTS48D11M
Type Turbo fan Turbo fan
Motor output ×
W 46×1 106×1
Number of units
Fan
m³/min 22.5/19.5/16 31/26/21
Airflow rate (H/M/L) l/s 375/325/267 517/433/350
cfm 794/688/565 1,094/918/741
Drive Direct drive Direct drive
Microprocessor thermostat for Microprocessor thermostat for
Temperature control
cooling and heating cooling and heating
Heat resistant foamed polyethylene / Regular foamed Heat resistant foamed polyethylene / Regular foamed
Insulation Heat insulation
polyethylene polyethylene
Air filter Resin net (with mould resistance) Resin net (with mould resistance)
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection)
Piping Gas pipes mm φ15.9 (Flare connection) φ15.9 (Flare connection)
connections
VP20 VP20
Drain pipe mm (External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20)
Mass kg 26 27
3 Sound pressure level (H/M/L) dB(A) 40/38/36 47/44/40
Safety devices Fuse Fuse
Operation manual, Installation manual, Declaration of Operation manual, Installation manual, Declaration of
conformity, Drain hose, Metal clamp, Washer for hanger, conformity, Drain hose, Metal clamp, Washer for hanger,
Standard accessories Clamp, Washer clamp, Joint insulating material, Sealing Clamp, Washer clamp, Joint insulating material, Sealing
material, Elbow, Installation pattern paper, Blocking material, Elbow, Installation pattern paper, Blocking
material, L-bent piping, Screw, Non woven fabric material, L-bent piping, Screw, Non woven fabric
Specification C: 4D080137 C: 4D080137
Drawing No.
Sound level C: 4D080130 C: 4D080131
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. The capacity of the indoor unit is only for reference. The actual capacity of the indoor unit is based on the total capacity index.
kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values Btu/h=kW×3412
are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
4. Refer to Electric Characteristics for the power input. l/s=m³/min×1000/60
88 FXUQ-A
EDMT341410C Dimensions
2. Dimensions
FXUQ71AVEB / FXUQ100AVEB
Unit: mm
3D080135
5
FXUQ-A 89
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXUQ71AVEB / FXUQ100AVEB
4D034245M
90 FXUQ-A
EDMT341410C Wiring Diagrams
4. Wiring Diagrams
FXUQ71AVEB / FXUQ100AVEB
3D079580
5
FXUQ-A 91
Electric Characteristics EDMT341410C
5. Electric Characteristics
FXUQ71AVEB / FXUQ100AVEB
4D080216A
92 FXUQ-A
EDMT341410C Safety Devices Setting
FXUQ-A 93
Capacity Tables EDMT341410C
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXUQ71AVEB 71 7.1 5.8 7.5 6.3 7.9 6.5 8.0 6.0 8.1 5.9 8.3 5.7 8.4 5.6
FXUQ100AVEB 100 9.9 8.0 10.5 8.4 11.0 8.7 11.2 8.1 11.3 7.9 11.6 7.7 11.8 7.4
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition.
94 FXUQ-A
EDMT341410C Sound Levels
8. Sound Levels
FXUQ71AVEB
4D080130
5
FXUQ100AVEB
4D080131
FXUQ-A 95
Accessories EDMT341410C
9. Accessories
9.1 Optional Accessories (for Unit)
Model
Item
FXUQ71AVEB FXUQ100AVEB
Sealing member of air discharge outlet KDBHP49B140
Decoration panel for air discharge KDBTP49B140
Replacement long-life filter KAFP551K160
C: 3D080116A
96 FXUQ-A
EDMT341410C
FXCQ-M
Ceiling Mounted Cassette
(Double Flow) Type
1. Specifications ........................................................................................98
2. Dimensions .........................................................................................100 6
3. Piping Diagrams..................................................................................104
4. Wiring Diagrams..................................................................................105
5. Electric Characteristics........................................................................107
6. Safety Devices Setting ........................................................................108
7. Capacity Tables ..................................................................................109
7.1 Cooling Capacity for Te: Auto ..............................................................109
7.2 Cooling Capacity for Te: 9°C................................................................109
8. Sound Levels ......................................................................................110
9. Centre of Gravity .................................................................................113
10.Accessories.........................................................................................114
10.1 Optional Accessories (for Unit).............................................................114
10.2 Optional Accessories (for Controls)......................................................114
FXCQ-M 97
Specifications EDMT341410C
1. Specifications
Ceiling mounted cassette (Double flow) type
Model FXCQ20MVE FXCQ25MVE FXCQ32MVE FXCQ40MVE
1 phase, 220-240/220 V, 1 phase, 220-240/220 V, 1 phase, 220-240/220 V, 1 phase, 220-240/220 V,
Power supply
50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
kcal/h 1,900 2,400 3,100 3,900
1 2 Cooling capacity Btu/h 7,500 9,600 12,300 15,400
kW 2.2 2.8 3.6 4.5
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 305×775×600 305×775×600 305×775×600 305×990×600
Model D17K2AA1 D17K2AB1 D17K2AB1 2D17K1AA1
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 10×1 15×1 15×1 20×1
Number of units
Fan
m³/min 7/5 9/6.5 9/6.5 12/9
Airflow rate (H/L) l/s 116/83 150/108 150/108 200/150
cfm 247/177 318/230 318/230 424/318
Drive Direct drive Direct drive Direct drive Direct drive
Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
Temperature control
for cooling and heating for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Piping
connections VP25 VP25 VP25 VP25
Drain pipe mm
( External dia. 32
Internal dia. 25 ) ( External dia. 32
Internal dia. 25 ) ( External dia. 32
Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 26 26 26 31
3 Sound pressure 220 V, 50/60 Hz 32/27 34/28 34/28 34/29
level (H/L) dB(A)
240 V, 50 Hz 34/29 36/30 36/30 37/32
Fuse, Thermal protector for Fuse, Thermal protector for Fuse, Thermal protector for Fuse, Thermal protector for
Safety devices
fan motor fan motor fan motor fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYBC32G-W1 BYBC32G-W1 BYBC32G-W1 BYBC50G-W1
Panel colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Decoration
panels Dimensions: (H×W×D) mm 53×1,030×680 53×1,030×680 53×1,030×680 53×1,245×680
(Option) Resin net Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 8 8 8 8.5
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Paper Installation manual, Paper Installation manual, Paper Installation manual, Paper
pattern for installation, pattern for installation, pattern for installation, pattern for installation,
Washer for hanging Washer for hanging Washer for hanging Washer for hanging
Standard accessories brackets, Clamp metal, brackets, Clamp metal, brackets, Clamp metal, brackets, Clamp metal,
Drain hose, Insulation for Drain hose, Insulation for Drain hose, Insulation for Drain hose, Insulation for
fitting, Washer fixing plates, fitting, Washer fixing plates, fitting, Washer fixing plates, fitting, Washer fixing plates,
Sealing pads, Clamps, Sealing pads, Clamps, Sealing pads, Clamps, Sealing pads, Clamps,
Screws, Washers Screws, Washers Screws, Washers Screws, Washers
Drawing Specification C: 3D039413 C: 3D039413 C: 3D039413 C: 3D039413
No. Sound level C: 4D034329 C: 4D034330 C: 4D034330 C: 4D034331
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
98 FXCQ-M
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
FXCQ-M 99
Dimensions EDMT341410C
2. Dimensions
FXCQ20MVE + BYBC32G-W1 (Decoration panel)
FXCQ25MVE + BYBC32G-W1 (Decoration panel)
FXCQ32MVE + BYBC32G-W1 (Decoration panel)
Unit: mm
3D039405C
100 FXCQ-M
EDMT341410C Dimensions
3D039406C
6
FXCQ-M 101
Dimensions EDMT341410C
3D039407C
102 FXCQ-M
EDMT341410C Dimensions
3D039409C
6
FXCQ-M 103
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ40MVE / FXCQ50MVE / FXCQ63MVE / FXCQ80MVE /
FXCQ125MVE
4D034245M
104 FXCQ-M
EDMT341410C Wiring Diagrams
4. Wiring Diagrams
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ63MVE
C: 3D039558A
6
FXCQ-M 105
Wiring Diagrams EDMT341410C
C: 3D039559A
106 FXCQ-M
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ40MVE / FXCQ50MVE / FXCQ63MVE / FXCQ80MVE /
FXCQ125MVE
C: 4D034243B
FXCQ-M 107
Safety Devices Setting EDMT341410C
108 FXCQ-M
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXCQ20MVE 20 1.9 1.7 2.1 1.8 2.2 1.8 2.2 1.7 2.2 1.6 2.3 1.5 2.3 1.4
FXCQ25MVE 25 2.5 2.2 2.6 2.2 2.8 2.3 2.8 2.2 2.8 2.1 2.9 2.0 3.0 1.8
FXCQ32MVE 32 3.2 2.5 3.4 2.7 3.5 2.7 3.6 2.6 3.6 2.4 3.7 2.4 3.8 2.3
FXCQ40MVE 40 4.0 3.2 4.2 3.4 4.4 3.4 4.5 3.2 4.6 3.2 4.7 3.0 4.8 2.8
FXCQ50MVE
FXCQ63MVE
50
63
4.9
6.3
3.7
4.8
5.3
6.7
3.9
5.1
5.5
7.0
4.1
5.2
5.6
7.1
3.9
4.9
5.7
7.2
3.9
4.6
5.8
7.3
3.7
4.4
5.9
7.5
3.3
4.2
6
FXCQ80MVE 80 7.9 6.6 8.5 6.9 8.8 6.8 9.0 6.3 9.1 6.1 9.3 6.0 9.5 5.6
FXCQ125MVE 125 12.3 9.5 13.2 10.2 13.8 10.4 14.0 9.7 14.2 9.5 14.5 9.0 14.8 8.6
FXCQ-M 109
Sound Levels EDMT341410C
8. Sound Levels
FXCQ20MVE
4D034329
FXCQ25MVE / FXCQ32MVE
4D034330
110 FXCQ-M
EDMT341410C Sound Levels
FXCQ40MVE / FXCQ50MVE
4D034331
6
FXCQ63MVE
4D034332
FXCQ-M 111
Sound Levels EDMT341410C
FXCQ80MVE
4D034333
FXCQ125MVE
4D034334
112 FXCQ-M
EDMT341410C Centre of Gravity
9. Centre of Gravity
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ40MVE / FXCQ50MVE / FXCQ63MVE / FXCQ80MVE /
FXCQ125MVE
Unit: mm
4D034788D
FXCQ-M 113
Accessories EDMT341410C
10. Accessories
10.1 Optional Accessories (for Unit)
Model
Item FXCQ20MVE
FXCQ25MVE FXCQ40MVE FXCQ50MVE FXCQ63MVE FXCQ80MVE FXCQ125MVE
FXCQ32MVE
Decoration panel BYBC32G-W1 BYBC50G-W1 BYBC63G-W1 BYBC125G-W1
High efficiency filter 65%
KAFJ532G36 KAFJ532G56 KAFJ532G80 KAFJ532G160
1
High efficiency filter 90%
KAFJ533G36 KAFJ533G56 KAFJ533G80 KAFJ533G160
Filter 1
related Filter Bottom KDDFJ53G36 KDDFJ53G56 KDDFJ53G80 KDDFJ53G160
chamber suction
Long life replacement
filter KAFJ531G36 KAFJ531G56 KAFJ531G80 KAFJ531G160
C: 3D035093E
Note:
1. Filter chamber is required if installing high efficiency filter.
114 FXCQ-M
EDMT341410C
FXKQ-MA
Ceiling Mounted Cassette
Corner Type
1. Specifications ......................................................................................116
2. Dimensions .........................................................................................117
3. Piping Diagrams..................................................................................119
4. Wiring Diagrams..................................................................................120 7
5. Electric Characteristics........................................................................121
6. Safety Devices Setting ........................................................................122
7. Capacity Tables ..................................................................................123
7.1 Cooling Capacity for Te: Auto ..............................................................123
7.2 Cooling Capacity for Te: 9°C................................................................123
8. Sound Levels ......................................................................................124
9. Centre of Gravity .................................................................................126
10.Accessories.........................................................................................127
10.1 Optional Accessories (for Unit).............................................................127
10.2 Optional Accessories (for Controls)......................................................127
FXKQ-MA 115
Specifications EDMT341410C
1. Specifications
Ceiling mounted cassette corner type
Model FXKQ25MAVE FXKQ32MAVE FXKQ40MAVE FXKQ63MAVE
1 phase, 220-240/220 V, 1 phase, 220-240/220 V, 1 phase, 220-240/220 V, 1 phase, 220-240/220 V,
Power supply
50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
kcal/h 2,400 3,100 3,900 6,100
1 2 Cooling capacity Btu/h 9,600 12,300 15,400 24,200
kW 2.8 3.6 4.5 7.1
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 215×1,110×710 215×1,110×710 215×1,110×710 215×1,310×710
Model 3D12H1AN1V1 3D12H1AN1V1 3D12H1AP1V1 4D12H1AJ1V1
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 15×1 15×1 20×1 45×1
Number of units
m³/min 11/9 11/9 13/10 18/15
Fan 50 Hz l/s 183/150 183/150 216/166 300/250
Airflow rate cfm 388/318 388/318 459/353 635/530
(H/L) m³/min 11/8.5 11/8.5 13/10 18/13
60 Hz l/s 183/141 183/141 216/166 300/216
cfm 388/300 388/300 459/353 635/459
Drive Direct drive Direct drive Direct drive Direct drive
Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
Temperature control
for cooling and heating for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Polyethylene foam Polyethylene foam Polyethylene foam Polyethylene foam
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Piping
connections VP25 VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 31 31 31 34
3 Sound pressure 220 V, 50/60 Hz 38/33 38/33 40/34 42/37
level (H/L) dB(A)
240 V, 50 Hz 40/35 40/35 42/36 44/39
Fuse, Fuse, Fuse, Fuse,
Safety devices
Thermal fuse for fan motor Thermal fuse for fan motor Thermal fuse for fan motor Thermal fuse for fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Model BYK45FJW1 BYK45FJW1 BYK45FJW1 BYK71FJW1
Panel colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Decoration
panels Dimensions: (H×W×D) mm 70×1,240×800 70×1,240×800 70×1,240×800 70×1,440×800
(Option) Resin net Resin net Resin net Resin net
Air filter
(with mould resistance) (with mould resistance) (with mould resistance) (with mould resistance)
Mass kg 8.5 8.5 8.5 9.5
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Paper Installation manual, Paper Installation manual, Paper Installation manual, Paper
pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain pattern for installation, Drain
hose, Clamp metal, hose, Clamp metal, hose, Clamp metal, hose, Clamp metal,
Insulation for fitting, Sealing Insulation for fitting, Sealing Insulation for fitting, Sealing Insulation for fitting, Sealing
Standard accessories pads, Clamps, Screws, pads, Clamps, Screws, pads, Clamps, Screws, pads, Clamps, Screws,
Washers, Positioning jig for Washers, Positioning jig for Washers, Positioning jig for Washers, Positioning jig for
installation, Insulation for installation, Insulation for installation, Insulation for installation, Insulation for
hanger bracket, Air outlet hanger bracket, Air outlet hanger bracket, Air outlet hanger bracket, Air outlet
blocking pad blocking pad blocking pad blocking pad
Drawing Specification C: 3D038813A C: 3D038813A C: 3D038813A C: 3D038813A
No. Sound level C: 4D037071 C: 4D037071 C: 4D037072 C: 4D037073
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values cfm=m³/min×35.3
are normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
116 FXKQ-MA
Unit: mm
FXKQ-MA
• Required installation space
EDMT341410C
5 1 2 3
200mm or more
1500mm or more 200mm or more
140
170
20mm or more
67
2. Dimensions
148
9
215 4
6 8
250 1240
45
125
190
233
280
800
710
FXKQ40MAVE + BYK45FJW1 (Decoration panel)
FXKQ32MAVE + BYK45FJW1 (Decoration panel)
FXKQ25MAVE + BYK45FJW1 (Decoration panel)
120
100
Number Name Description
1 Liquid pipe connection φ6.4 flare connection
215
170
2 Gas pipe connection
140
φ12.7 flare connection
3 Drain pipe connection VP25 (O.D. φ32)
20
4 Wire intake
520 5 Interunit wiring connection
6 Grounding terminal Inside switch box (M4)
7 Discharge
8 Air suction grille
1000 or more
Required
installation space
9 Long life filter
10 Suspension bolt
C: 3D038840
117
Dimensions
7
118
Unit: mm
Dimensions
200mm or more
1500mm or more 200mm or more
140
170
20mm or more
67
148
215
6 4 8 9
250 1440
45
125
190
233
280
FXKQ63MAVE + BYK71FJW1 (Decoration panel)
800
710
120
100
1 Liquid pipe connection φ9.5 flare connection
2 Gas pipe connection φ15.9 flare connection
215
3 Drain pipe connection VP25 (O.D. φ32)
140
4 Wire intake
5 Interunit wiring connection
20
6 Grounding terminal Inside switch box (M4)
720 7 Discharge
8 Air suction grille
Required
installation
space
C: 3D038841
FXKQ-MA
EDMT341410C
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE / FXKQ63MAVE
4D034245M
FXKQ-MA 119
120
INDOOR UNIT
A1P PRINTED CIRCUIT BOARD
A2P TERMINAL BOARD
Wiring Diagrams
C1 CAPACITOR (M1F)
POWER SUPPLY
F1U FUSE ( B , 5A, 250V) ELECTRIC PARTS BOX
220-240V 220V
HAP LIGHT EMITTING DIODE ~ ~ X18A X16A
(SERVICE MONITOR-GREEN) 50Hz 60Hz
MAGNETIC RELAY (M1F) S1Q
K1R-K3R C1
KAR MAGNETIC RELAY (M1S) R1T R2T R3T S1L A2P
X1M A1P T1R X1M
L N X2M
KPR MAGNETIC RELAY (M1P) GRN/ t˚ t˚ t˚
A1P RED WHT YLW BLK
M1F MOTOR (INDOOR FAN) FC FH FL FLL
X4A
4. Wiring Diagrams
C: 3D039564C
FXKQ-MA
EDMT341410C
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE / FXKQ63MAVE
4D037076C
FXKQ-MA 121
Safety Devices Setting EDMT341410C
122 FXKQ-MA
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXKQ25MAVE 25 2.5 2.4 2.6 2.6 2.8 2.5 2.8 2.4 2.8 2.3 2.9 2.3 3.0 2.2
FXKQ32MAVE 32 3.2 2.7 3.4 2.9 3.5 2.8 3.6 2.7 3.6 2.6 3.7 2.6 3.8 2.5
FXKQ40MAVE 40 4.0 3.3 4.2 3.4 4.4 3.5 4.5 3.2 4.6 3.2 4.7 3.1 4.8 2.9
FXKQ63MAVE 63 6.3 5.0 6.7 5.3 7.0 5.5 7.1 5.1 7.2 5.0 7.3 4.8 7.5 4.6
FXKQ-MA 123
Sound Levels EDMT341410C
8. Sound Levels
FXKQ25MAVE / FXKQ32MAVE
4D037071
FXKQ40MAVE
4D037072
124 FXKQ-MA
EDMT341410C Sound Levels
FXKQ63MAVE
4D037073
7
FXKQ-MA 125
Centre of Gravity EDMT341410C
9. Centre of Gravity
FXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE / FXKQ63MAVE
Unit: mm
C: 4D037079A
126 FXKQ-MA
EDMT341410C Accessories
10. Accessories
10.1 Optional Accessories (for Unit)
Model
Item FXKQ25MAVE
FXKQ32MAVE FXKQ63MAVE
FXKQ40MAVE
Decoration panel BYK45FJW1 BYK71FJW1
Panel
related Long life replacement
KAFJ521F56 KAFJ521F80
filter
Air discharge grill K-HV7AW K-HV9AW
Air inlet Air discharge blind
and air panel KDBJ52F56W KDBJ52F80W
discharge
outlet Panel spacer KPBJ52F56W KPBJ52F80W
related Flexible duct
KFDJ52FA56 KFDJ52FA80
(with shutter)
C: 3D037081A 7
FXKQ-MA 127
Accessories EDMT341410C
128 FXKQ-MA
EDMT341410C
FXDQ-PB / FXDQ-NB
Slim Ceiling Mounted Duct Type
(Standard Series)
1. Specifications ......................................................................................130
1.1 FXDQ-PB .............................................................................................130
1.2 FXDQ-NB .............................................................................................131
2. Dimensions .........................................................................................132
2.1 FXDQ-PB .............................................................................................132
2.2 FXDQ-NB .............................................................................................134 8
3. Piping Diagrams..................................................................................138
4. Wiring Diagrams..................................................................................139
5. Electric Characteristics........................................................................141
6. Safety Devices Setting ........................................................................142
7. Capacity Tables ..................................................................................143
7.1 Cooling Capacity for Te: Auto ..............................................................143
7.2 Cooling Capacity for Te: 9°C................................................................143
8. Fan Performances...............................................................................144
8.1 FXDQ-PB .............................................................................................144
8.2 FXDQ-NB .............................................................................................145
9. Sound Levels ......................................................................................146
9.1 FXDQ-PB .............................................................................................146
9.2 FXDQ-NB .............................................................................................148
10.Centre of Gravity .................................................................................150
10.1 FXDQ-PB .............................................................................................150
10.2 FXDQ-NB .............................................................................................151
11.Accessories.........................................................................................152
11.1 Optional Accessories (for Unit).............................................................152
11.2 Optional Accessories (for Controls)......................................................152
1. Specifications
1.1 FXDQ-PB
Slim ceiling mounted duct type (Standard series) <700 mm width type>
with a drain pump FXDQ20PBVE FXDQ25PBVE FXDQ32PBVE
Model
without a drain pump FXDQ20PBVET FXDQ25PBVET FXDQ32PBVET
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 1,900 2,400 3,100
1 2 Cooling capacity Btu/h 7,500 9,600 12,300
kW 2.2 2.8 3.6
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 200×700×620 200×700×620 200×700×620
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 62×1 62×1 62×1
Number of units
Fan m³/min 8.0/7.2/6.4 8.0/7.2/6.4 8.0/7.2/6.4
Airflow rate (HH/H/L) l/s 133/120/106 133/120/106 133/120/106
cfm 282/254/226 282/254/226 282/254/226
3 External static pressure Pa 30-10 30-10 30-10
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
Temperature control
for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Foamed polyethylene Foamed polyethylene Foamed polyethylene
Air filter Removal / Washable / Mildew proof Removal / Washable / Mildew proof Removal / Washable / Mildew proof
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Piping Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
connections
Drain pipe mm VP20 VP20 VP20
(External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20)
Mass kg 23 23 23
4 5 6 Sound pressure level (HH/H/L) dB(A) 28/26/23 28/26/23 28/26/24
Safety devices Fuse, Thermal protector for fan motor Fuse, Thermal protector for fan motor Fuse, Thermal protector for fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Operation manual, Installation Operation manual, Installation Operation manual, Installation
manual, Drain hose, Sealing pads, manual, Drain hose, Sealing pads, manual, Drain hose, Sealing pads,
Clamps, Washers, Insulation for Clamps, Washers, Insulation for Clamps, Washers, Insulation for
Standard accessories
fitting, Clamp metal, Washer fixing fitting, Clamp metal, Washer fixing fitting, Clamp metal, Washer fixing
plate, Screws for duct flanges, Air plate, Screws for duct flanges, Air plate, Screws for duct flanges, Air
filter, (Product quality certificate 7) filter, (Product quality certificate 7) filter, (Product quality certificate 7)
Specification C: 3D060921C C: 3D060921C C: 3D060921C
Drawing No.
Sound level C: 4D090841 C: 4D090842 C: 4D090844
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard static pressure”. cfm=m³/min×35.3
(Factory setting is 10 Pa for FXDQ-PB models and 15 Pa for FXDQ-NB models.) l/s=m³/min×1000/60
4. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
5. Values are based on the following conditions: FXDQ-PB: external static pressure of 10 Pa; FXDQ-NB: external static pressure of 15 Pa.
6. The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be
obtained by adding 5 dB(A).
7. FXDQ20 / 25 / 32PBVE only.
8. Refer to Electric Characteristics for the power input.
1.2 FXDQ-NB
Slim ceiling mounted duct type (Standard series) <900 / 1,100 mm width type>
with a drain pump FXDQ40NBVE FXDQ50NBVE FXDQ63NBVE
Model
without a drain pump FXDQ40NBVET FXDQ50NBVET FXDQ63NBVET
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 3,900 4,800 6,100
1 2 Cooling capacity Btu/h 15,400 19,100 24,200
kW 4.5 5.6 7.1
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 200×900×620 200×900×620 200×1,100×620
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 62×1 130×1 130×1
Number of units
Fan m³/min 10.5/9.5/8.5 12.5/11.0/10.0 16.5/14.5/13.0
Airflow rate (HH/H/L) l/s 175/158/141 208/183/166 275/241/216
cfm 371/335/300 441/388/353 583/512/459
3 External static pressure Pa 44-15 44-15 44-15 8
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat Microprocessor thermostat Microprocessor thermostat
Temperature control
for cooling and heating for cooling and heating for cooling and heating
Sound absorbing thermal insulation material Foamed polyethylene Foamed polyethylene Foamed polyethylene
Air filter Removal / Washable / Mildew proof Removal / Washable / Mildew proof Removal / Washable / Mildew proof
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Piping Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
connections
Drain pipe mm VP20 VP20 VP20
(External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20)
Mass kg 27 28 31
4 5 6 Sound pressure level (HH/H/L) dB(A) 30/28/26 33/30/27 33/31/29
Safety devices Fuse, Thermal protector for fan motor Fuse, Thermal protector for fan motor Fuse, Thermal protector for fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Operation manual, Installation Operation manual, Installation Operation manual, Installation
manual, Drain hose, Sealing pads, manual, Drain hose, Sealing pads, manual, Drain hose, Sealing pads,
Clamps, Washers, Insulation for Clamps, Washers, Insulation for Clamps, Washers, Insulation for
Standard accessories
fitting, Clamp metal, Washer fixing fitting, Clamp metal, Washer fixing fitting, Clamp metal, Washer fixing
plate, Screws for duct flanges, Air plate, Screws for duct flanges, Air plate, Screws for duct flanges, Air
filter, (Product quality certificate 7) filter, (Product quality certificate 7) filter, (Product quality certificate 7)
Specification C: 3D060921C C: 3D060921C C: 3D060921C
Drawing No.
Sound level C: 4D090843 C: 4D090845 C: 4D090846
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard static pressure”. cfm=m³/min×35.3
(Factory setting is 10 Pa for FXDQ-PB models and 15 Pa for FXDQ-NB models.) l/s=m³/min×1000/60
4. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
5. Values are based on the following conditions: FXDQ-PB: external static pressure of 10 Pa; FXDQ-NB: external static pressure of 15 Pa.
6. The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be
obtained by adding 5 dB(A).
7. FXDQ40 / 50 / 63NBVE only.
8. Refer to Electric Characteristics for the power input.
2. Dimensions
2.1 FXDQ-PB
3D049799C
3D050732B
8
2.2 FXDQ-NB
3D045494D
3D045496E
8
3D049701B
3D049702B
8
3. Piping Diagrams
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE / FXDQ40NBVE / FXDQ50NBVE / FXDQ63NBVE
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET / FXDQ40NBVET / FXDQ50NBVET / FXDQ63NBVET
4D060927B
4. Wiring Diagrams
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE / FXDQ40NBVE / FXDQ50NBVE / FXDQ63NBVE
(with a drain pump)
3D060547B
8
Y1E
V1TR
YLW
WHT
X7A
X18A X16A RED M
~
BLK Q1M
X4A M1F
A1P HAP
X1M C1 X2M
Z1C
T1R
Z2C
NOTES) CONTROL BOX
1. : TERMINAL
, : CONNECTOR
2. : FIELD WIRING
3. IN CASE USING CENTRAL REMOTE CONTROLLER, CONNECT IT TO THE UNIT IN ACCORDANCE WITH THE ATTACHED INSTALLATION MANUAL.
4. REMOTE CONTROLLER MODEL VARIES ACCORDING TO THE COMBINATION SYSTEM, CONFIRM ENGINEERING MATERIALS AND CATALOGS, ETC. BEFORE CONNECTING.
5. WHEN CONNECTING THE INPUT WIRES FROM OUTSIDE, FORCED OFF OR ON/OFF CONTROL OPERATION CAN BE SELECTED BY REMOTE CONTROLLER.
IN DETAILS, REFER TO THE INSTALLATION MANUAL ATTACHED THE UNIT.
6. SYMBOLS SHOW AS FOLLOWS: RED : RED BLK : BLACK WHT : WHITE YLW : YELLOW PRP : PURPLE GRY : GRAY BLU : BLUE PNK : PINK ORG : ORANGE GRN : GREEN
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET / FXDQ40NBVET / FXDQ50NBVET / FXDQ63NBVET
C: 3D060548
EDMT341410C
FXDQ-PB / FXDQ-NB
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE / FXDQ40NBVE / FXDQ50NBVE / FXDQ63NBVE
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET / FXDQ40NBVET / FXDQ50NBVET / FXDQ63NBVET
4D060922
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXDQ20PBVE
20 1.9 1.8 2.1 1.9 2.2 1.9 2.2 1.9 2.2 1.8 2.3 1.6 2.3 1.7
FXDQ20PBVET
FXDQ25PBVE
25 2.5 2.1 2.6 2.2 2.8 2.3 2.8 2.1 2.8 2.1 2.9 2.0 3.0 1.9
FXDQ25PBVET
FXDQ32PBVE
32 3.2 2.4 3.4 2.6 3.5 2.6 3.6 2.6 3.6 2.4 3.7 2.4 3.8 2.4
FXDQ32PBVET
FXDQ40NBVE
FXDQ40NBVET 40 4.0 3.0 4.2 3.3 4.4 3.4 4.5 3.3 4.6 3.1 4.7 3.0 4.8 3.1
FXDQ50NBVE
50 4.9 3.7 5.3 4.0 5.5 4.2 5.6 4.0 5.7 3.9 5.8 3.8 5.9 3.5
FXDQ50NBVET
FXDQ63NBVE
63 6.3 4.8 6.7 5.1 7.0 5.3 7.1 4.9 7.2 4.6 7.3 4.6 7.5 4.6
FXDQ63NBVET
8
TC: Total capacity: kW
SHC: Sensible heat capacity: kW
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition.
FXDQ25PBVE
25 1.3 1.2 1.6 1.6 2.0 1.8 2.2 1.8 2.2 1.8 2.4 1.8 2.6 1.7
FXDQ25PBVET
FXDQ32PBVE
FXDQ32PBVET 32 1.7 1.5 2.0 1.8 2.6 2.0 2.8 2.2 2.8 2.0 3.0 2.1 3.2 2.1
FXDQ40NBVE
FXDQ40NBVET 40 2.0 2.0 2.5 2.3 3.2 2.7 3.5 2.8 3.7 2.7 3.9 2.6 4.1 2.8
FXDQ50NBVE
FXDQ50NBVET 50 2.6 2.4 3.1 2.9 3.9 3.3 4.4 3.4 4.6 3.3 4.8 3.4 5.1 3.1
FXDQ63NBVE
FXDQ63NBVET 63 3.2 2.9 4.0 3.5 5.1 4.1 5.6 4.2 5.8 4.0 6.2 4.1 6.5 4.1
8. Fan Performances
8.1 FXDQ-PB
FXDQ20PBVE / FXDQ25PBVE FXDQ32PBVE
FXDQ20PBVET / FXDQ25PBVET FXDQ32PBVET
C: 3D052156D C: 3D052157D
Notes:
1. The remote controller can be used to switch between “HH”, “H” and “L”.
2. The airflow is set to “standard” before leaving the factory.
It is possible to switch between “standard ESP” and “high ESP” by the remote controller.
8.2 FXDQ-NB
FXDQ40NBVE FXDQ50NBVE
FXDQ40NBVET FXDQ50NBVET
C: 3D046299F
C: 3D046300F
FXDQ63NBVE
FXDQ63NBVET
C: 3D046301F
Notes:
1. The remote controller can be used to switch between “HH”, “H” and “L”.
2. The airflow is set to “standard” before leaving the factory.
It is possible to switch between “standard ESP” and “high ESP” by the remote controller.
9. Sound Levels
9.1 FXDQ-PB
FXDQ20PBVE
FXDQ20PBVET
4D090841
FXDQ25PBVE
FXDQ25PBVET
4D090842
FXDQ32PBVE
FXDQ32PBVET
4D090844
8
9.2 FXDQ-NB
FXDQ40NBVE
FXDQ40NBVET
4D090843
FXDQ50NBVE
FXDQ50NBVET
4D090845
FXDQ63NBVE
FXDQ63NBVET
4D090846
8
4D049300L
10.2 FXDQ-NB
FXDQ40NBVE / FXDQ50NBVE
FXDQ40NBVET / FXDQ50NBVET
Unit: mm
4D043886Q
FXDQ63NBVE
FXDQ63NBVET
Unit: mm
4D043887P
11. Accessories
11.1 Optional Accessories (for Unit)
Model
Item FXDQ20PBVE FXDQ20PBVET
FXDQ40NBVE FXDQ40NBVET
FXDQ25PBVE FXDQ25PBVET FXDQ63NBVE FXDQ63NBVET
FXDQ32PBVE FXDQ32PBVET FXDQ50NBVE FXDQ50NBVET
FXDQ-SP
Slim Ceiling Mounted Duct Type
(Compact Series)
1. Specifications ......................................................................................154
2. Dimensions .........................................................................................156
3. Piping Diagrams..................................................................................159
4. Wiring Diagrams..................................................................................160
5. Electric Characteristics........................................................................161
6. Safety Devices Setting ........................................................................162
7. Capacity Tables ..................................................................................163 9
7.1 Cooling Capacity for Te: Auto ..............................................................163
7.2 Cooling Capacity for Te: 9°C................................................................163
8. Fan Performances...............................................................................164
9. Sound Levels ......................................................................................169
10.Centre of Gravity .................................................................................172
11.Accessories.........................................................................................174
11.1 Optional Accessories (for Controls)......................................................174
FXDQ-SP 153
Specifications EDMT341410C
1. Specifications
Slim ceiling mounted duct type (Compact series) <700 mm width type>
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factory cfm=m³/min×35.3
setting is 10 Pa for FXDQ20-32SP models and 20 Pa for FXDQ40-63SP models.) l/s=m³/min×1000/60
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method)
50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Values are based on the following conditions: FXDQ20-32SP: external static pressure of 10 Pa; FXDQ40-63SP: external static pressure of
20 Pa.
7. The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be
obtained by adding 5 dB(A).
8. Refer to Electric Characteristics for the power input.
154 FXDQ-SP
EDMT341410C Specifications
Slim ceiling mounted duct type (Compact series) <900 / 1,100 mm width type>
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factory cfm=m³/min×35.3
setting is 10 Pa for FXDQ20-32SP models and 20 Pa for FXDQ40-63SP models.) l/s=m³/min×1000/60
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method)
50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Values are based on the following conditions: FXDQ20-32SP: external static pressure of 10 Pa; FXDQ40-63SP: external static pressure of
20 Pa.
7. The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be
obtained by adding 5 dB(A).
8. Refer to Electric Characteristics for the power input.
FXDQ-SP 155
Dimensions EDMT341410C
2. Dimensions
FXDQ20SPV1 / FXDQ25SPV1 / FXDQ32SPV1
Unit: mm
3D071829D
156 FXDQ-SP
EDMT341410C Dimensions
FXDQ40SPV1 / FXDQ50SPV1
Unit: mm
3D071831D
9
FXDQ-SP 157
Dimensions EDMT341410C
FXDQ63SPV1
Unit: mm
3D071830D
158 FXDQ-SP
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXDQ20SPV1 / FXDQ25SPV1 / FXDQ32SPV1 / FXDQ40SPV1 / FXDQ50SPV1 / FXDQ63SPV1
4D090514
FXDQ-SP 159
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXDQ20SPV1 / FXDQ25SPV1 / FXDQ32SPV1 / FXDQ40SPV1 / FXDQ50SPV1 / FXDQ63SPV1
3D099151
160 FXDQ-SP
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXDQ20SPV1 / FXDQ25SPV1 / FXDQ32SPV1 / FXDQ40SPV1 / FXDQ50SPV1 / FXDQ63SPV1
4D090515
FXDQ-SP 161
Safety Devices Setting EDMT341410C
162 FXDQ-SP
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXDQ20SPV1 20 1.9 1.8 2.1 1.8 2.2 1.7 2.2 1.6 2.2 1.6 2.3 1.4 2.3 1.3
FXDQ25SPV1 25 2.5 2.2 2.6 2.2 2.8 2.2 2.8 2.0 2.8 1.9 2.9 1.8 3.0 1.7
FXDQ32SPV1 32 3.2 2.6 3.4 2.8 3.5 2.9 3.6 2.6 3.6 2.6 3.7 2.3 3.8 2.2
FXDQ40SPV1 40 4.0 3.5 4.2 3.7 4.4 3.7 4.5 3.4 4.6 3.2 4.7 3.0 4.8 2.8
FXDQ50SPV1 50 4.9 4.0 5.3 4.3 5.5 4.5 5.6 4.1 5.7 4.0 5.8 3.6 5.9 3.4
FXDQ63SPV1 63 6.3 5.2 6.7 5.6 7.0 5.5 7.1 5.1 7.2 4.9 7.3 4.5 7.5 4.2
FXDQ-SP 163
Fan Performances EDMT341410C
8. Fan Performances
FXDQ20SPV1
3D072697C
164 FXDQ-SP
EDMT341410C Fan Performances
FXDQ25SPV1
3D072698C
9
FXDQ-SP 165
Fan Performances EDMT341410C
FXDQ32SPV1
3D090527
166 FXDQ-SP
EDMT341410C Fan Performances
FXDQ40SPV1 / FXDQ50SPV1
3D072702C
9
FXDQ-SP 167
Fan Performances EDMT341410C
FXDQ63SPV1
3D090542
168 FXDQ-SP
EDMT341410C Sound Levels
9. Sound Levels
FXDQ20SPV1
4D090507A
9
FXDQ25SPV1
4D090508A
FXDQ-SP 169
Sound Levels EDMT341410C
FXDQ32SPV1
4D090509A
FXDQ40SPV1 / FXDQ50SPV1
4D090510A
170 FXDQ-SP
EDMT341410C Sound Levels
FXDQ63SPV1
4D090511A
9
FXDQ-SP 171
Centre of Gravity EDMT341410C
Unit: mm
4D072718G
FXDQ40SPV1 / FXDQ50SPV1
Unit: mm
4D072719G
172 FXDQ-SP
EDMT341410C Centre of Gravity
FXDQ63SPV1
Unit: mm
9
4D072720H
FXDQ-SP 173
Accessories EDMT341410C
11. Accessories
11.1 Optional Accessories (for Controls)
Refer to page 822.
174 FXDQ-SP
EDMT341410C
FXSQ-P
Middle Static Pressure
Ceiling Mounted Duct Type
1. Specifications ......................................................................................176
2. Dimensions .........................................................................................179
3. Piping Diagrams..................................................................................185
4. Wiring Diagrams..................................................................................186
5. Electric Characteristics........................................................................187
6. Safety Devices Setting ........................................................................188
7. Capacity Tables ..................................................................................189
7.1 Cooling Capacity for Te: Auto ..............................................................189
7.2 Cooling Capacity for Te: 9°C................................................................189
10
8. Fan Performances...............................................................................190
9. Airflow Auto Adjustment Characteristics .............................................199
10.Sound Levels ......................................................................................208
11.Centre of Gravity .................................................................................213
12.Accessories.........................................................................................214
12.1 Optional Accessories (for Unit).............................................................214
12.2 Optional Accessories (for Controls)......................................................214
FXSQ-P 175
Specifications EDMT341410C
1. Specifications
Middle static pressure ceiling mounted duct type
Model FXSQ20PVE FXSQ25PVE FXSQ32PVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 1,900 2,400 3,100
1 2 Cooling capacity Btu/h 7,500 9,600 12,300
kW 2.2 2.8 3.6
6
Cooling kW 0.058 0.058 0.066
Power input
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 245×550×800 245×550×800 245×550×800
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 78×1 78×1 78×1
Number of units
Fan m³/min 9/7.5/6.5 9/7.5/6.5 9.5/8/7
Airflow rate (H/M/L) l/s 150/125/108 150/125/108 158/133/116
cfm 318/265/230 318/265/230 335/282/247
External static pressure Pa Rated 50 (150-30 3) Rated 50 (150-30 3) Rated 50 (150-30 3)
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat for Microprocessor thermostat for Microprocessor thermostat for
Temperature control cooling and heating cooling and heating cooling and heating
Air filter — 4 — 4 — 4
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Piping
connections VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 25 25 25
5 Sound pressure level (H/M/L) dB(A) 33/30/28 33/30/28 34/32/30
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 13 stages (20-40 class), 11 stages (50-125 class), 10 stages (140 class) by remote controller. Btu/h=kW×3412
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more. cfm=m³/min×35.3
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
176 FXSQ-P
EDMT341410C Specifications
Piping
connections
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection) 10
VP25 VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32 External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( Internal dia. 25 ) ( Internal dia. 25 )
Mass kg 27 35 35 37
5 Sound pressure level (H/M/L) dB(A) 36/33/30 34/32/29 36/32/29 37.5/34/30
Fuse, Fuse, Fuse, Fuse,
Safety devices Fan driver overload Fan driver overload Fan driver overload Fan driver overload
protector protector protector protector
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Operation manual, Operation manual, Operation manual, Operation manual,
Installation manual, Drain Installation manual, Drain Installation manual, Drain Installation manual, Drain
hose, Sealing material, hose, Sealing material, hose, Sealing material, hose, Sealing material,
Standard accessories Clamps, Washers, Screws, Clamps, Washers, Screws, Clamps, Washers, Screws, Clamps, Washers, Screws,
Thermal insulation, Hose Thermal insulation, Hose Thermal insulation, Hose Thermal insulation, Hose
band, Air discharge flange, band, Air discharge flange, band, Air discharge flange, band, Air discharge flange,
Air suction flange Air suction flange Air suction flange Air suction flange
Specification C: 3D095816A C: 3D095816A C: 3D095816A C: 3D095816A
Drawing No.
Sound level C: 4D095806A C: 4D095807A C: 4D095808A C: 4D095809A
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 13 stages (20-40 class), 11 stages (50-125 class), 10 stages (140 class) by remote controller. Btu/h=kW×3412
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more. cfm=m³/min×35.3
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
FXSQ-P 177
Specifications EDMT341410C
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 13 stages (20-40 class), 11 stages (50-125 class), 10 stages (140 class) by remote controller. Btu/h=kW×3412
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more. cfm=m³/min×35.3
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
178 FXSQ-P
EDMT341410C Dimensions
2. Dimensions
FXSQ20PVE / FXSQ25PVE / FXSQ32PVE
3D095725A
Unit: mm
10
FXSQ-P 179
Dimensions EDMT341410C
FXSQ40PVE
3D095726A
Unit: mm
180 FXSQ-P
EDMT341410C Dimensions
FXSQ50PVE
3D096164A
Unit: mm
10
FXSQ-P 181
Dimensions EDMT341410C
FXSQ63PVE / FXSQ80PVE
3D095426B
Unit: mm
182 FXSQ-P
EDMT341410C Dimensions
FXSQ100PVE / FXSQ125PVE
3D095427B
Unit: mm
10
FXSQ-P 183
Dimensions EDMT341410C
FXSQ140PVE
3D095727B
Unit: mm
184 FXSQ-P
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXSQ20PVE / FXSQ25PVE / FXSQ32PVE / FXSQ40PVE / FXSQ50PVE / FXSQ63PVE / FXSQ80PVE /
FXSQ100PVE / FXSQ125PVE / FXSQ140PVE
10
4D034245M
FXSQ-P 185
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXSQ20PVE / FXSQ25PVE / FXSQ32PVE / FXSQ40PVE / FXSQ50PVE / FXSQ63PVE / FXSQ80PVE /
FXSQ100PVE / FXSQ125PVE / FXSQ140PVE
C: 3D092752B
186 FXSQ-P
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXSQ20PVE / FXSQ25PVE / FXSQ32PVE / FXSQ40PVE / FXSQ50PVE / FXSQ63PVE / FXSQ80PVE /
FXSQ100PVE / FXSQ125PVE / FXSQ140PVE
10
4D096947A
FXSQ-P 187
Safety Devices Setting EDMT341410C
Model FXSQ20PVE FXSQ25PVE FXSQ32PVE FXSQ40PVE FXSQ50PVE FXSQ63PVE FXSQ80PVE FXSQ100PVE FXSQ125PVE FXSQ140PVE
Printed circuit board fuse 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A
Printed circuit board fuse
250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A
(Fan driver)
Drain pump thermal fuse °C — — — — — — — — — —
C: 3D034597M
188 FXSQ-P
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXSQ20PVE 20 1.9 1.9 2.1 2.0 2.2 1.9 2.2 1.8 2.2 1.8 2.3 1.7 2.3 1.7
FXSQ25PVE 25 2.5 2.2 2.6 2.2 2.8 2.3 2.8 2.2 2.8 2.1 2.9 2.0 3.0 2.0
FXSQ32PVE 32 3.2 2.6 3.4 2.7 3.5 2.8 3.6 2.7 3.6 2.6 3.7 2.5 3.8 2.5
FXSQ40PVE 40 4.0 3.5 4.2 3.8 4.4 4.0 4.5 3.7 4.6 3.6 4.7 3.4 4.8 3.4
FXSQ50PVE 50 4.9 4.2 5.3 4.6 5.5 4.7 5.6 4.3 5.7 4.2 5.8 4.1 5.9 3.9
FXSQ63PVE 63 6.3 5.3 6.7 5.7 7.0 5.9 7.1 5.4 7.2 5.4 7.3 5.2 7.5 5.1
FXSQ80PVE 80 7.9 6.3 8.5 6.8 8.8 7.1 9.0 6.5 9.1 6.4 9.3 6.2 9.5 6.0
FXSQ100PVE 100 9.9 8.2 10.5 8.9 11.0 9.2 11.2 8.5 11.3 8.4 11.6 8.1 11.8 7.9
FXSQ125PVE 125 12.3 9.9 13.2 10.7 13.8 10.9 14.0 10.1 14.2 10.0 14.5 9.7 14.8 9.3
FXSQ140PVE 140 14.1 11.0 15.0 11.8 15.7 12.4 16.0 11.6 16.2 11.4 16.5 11.1 16.9 10.6
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition. 10
7.2 Cooling Capacity for Te: 9°C
For VRV indoor units only at Te: 9°C /
mixed combination of VRV and residential indoor units
FXSQ-P 189
Fan Performances EDMT341410C
8. Fan Performances
FXSQ20PVE / FXSQ25PVE
3D095855A
190 FXSQ-P
EDMT341410C Fan Performances
FXSQ32PVE
3D095856A
10
FXSQ-P 191
Fan Performances EDMT341410C
FXSQ40PVE
3D095857A
192 FXSQ-P
EDMT341410C Fan Performances
FXSQ50PVE
3D095858A
10
FXSQ-P 193
Fan Performances EDMT341410C
FXSQ63PVE
3D095859A
194 FXSQ-P
EDMT341410C Fan Performances
FXSQ80PVE
3D095860A
10
FXSQ-P 195
Fan Performances EDMT341410C
FXSQ100PVE
3D095861A
196 FXSQ-P
EDMT341410C Fan Performances
FXSQ125PVE
3D095862A
10
FXSQ-P 197
Fan Performances EDMT341410C
FXSQ140PVE
3D095863A
198 FXSQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
3D095846A
10
FXSQ-P 199
Airflow Auto Adjustment Characteristics EDMT341410C
FXSQ32PVE
3D095847A
200 FXSQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXSQ40PVE
3D095848A
10
FXSQ-P 201
Airflow Auto Adjustment Characteristics EDMT341410C
FXSQ50PVE
3D095849A
202 FXSQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXSQ63PVE
3D095850A
10
FXSQ-P 203
Airflow Auto Adjustment Characteristics EDMT341410C
FXSQ80PVE
3D095851A
204 FXSQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXSQ100PVE
3D095852A
10
FXSQ-P 205
Airflow Auto Adjustment Characteristics EDMT341410C
FXSQ125PVE
3D095853A
206 FXSQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXSQ140PVE
3D095854A
10
FXSQ-P 207
Sound Levels EDMT341410C
4D095804A
FXSQ32PVE
4D095805A
208 FXSQ-P
EDMT341410C Sound Levels
FXSQ40PVE
4D095806A
10
FXSQ50PVE
4D095807A
FXSQ-P 209
Sound Levels EDMT341410C
FXSQ63PVE
4D095808A
FXSQ80PVE
4D095809A
210 FXSQ-P
EDMT341410C Sound Levels
FXSQ100PVE
4D095810A
10
FXSQ125PVE
4D095811A
FXSQ-P 211
Sound Levels EDMT341410C
FXSQ140PVE
4D095812A
212 FXSQ-P
EDMT341410C Centre of Gravity
10
4D095814B
FXSQ-P 213
Accessories EDMT341410C
12. Accessories
12.1 Optional Accessories (for Unit)
Model
Item
FXSQ20PVE FXSQ25PVE FXSQ32PVE FXSQ40PVE FXSQ50PVE FXSQ63PVE FXSQ80PVE FXSQ100PVE FXSQ125PVE FXSQ140PVE
Notes:
1. If installing high efficiency filter and long-life filter to the unit, filter chamber is required.
2. This option is a set of KDAP25A140A and KDBHP37A160.
214 FXSQ-P
EDMT341410C
FXMQ-P
Ceiling Mounted Duct Type
1. Specifications ......................................................................................216
2. Dimensions .........................................................................................219
3. Piping Diagrams..................................................................................224
4. Wiring Diagrams..................................................................................225
5. Electric Characteristics........................................................................226
6. Safety Devices Setting ........................................................................227
7. Capacity Tables ..................................................................................228
7.1 Cooling Capacity for Te: Auto ..............................................................228
7.2 Cooling Capacity for Te: 9°C................................................................228
8. Fan Performances...............................................................................229
9. Airflow Auto Adjustment Characteristics .............................................238
10.Sound Levels ......................................................................................246
11.Centre of Gravity .................................................................................251 11
12.Accessories.........................................................................................252
12.1 Optional Accessories (for Unit).............................................................252
12.2 Optional Accessories (for Controls)......................................................252
FXMQ-P 215
Specifications EDMT341410C
1. Specifications
Ceiling mounted duct type
Model FXMQ20PVE FXMQ25PVE FXMQ32PVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 1,900 2,400 3,100
1 2 Cooling capacity Btu/h 7,500 9,600 12,300
kW 2.2 2.8 3.6
6 50 Hz kW 0.056 0.056 0.060
Cooling
Power input 60 Hz kW 0.056 0.056 0.059
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 300×550×700 300×550×700 300×550×700
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 90×1 90×1 90×1
Number of units
Fan m³/min 9/7.5/6.5 9/7.5/6.5 9.5/8/7
Airflow rate (HH/H/L) l/s 150/125/108 150/125/108 158/133/116
cfm 318/265/230 318/265/230 335/282/247
External static pressure Pa Rated 50 (100-30 3) Rated 50 (100-30 3) Rated 50 (100-30 3)
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat for Microprocessor thermostat for Microprocessor thermostat for
Temperature control
cooling and heating cooling and heating cooling and heating
Air filter 4 4 4
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Piping
connections VP25 VP25 VP25
Drain pipe mm External dia. 32 External dia. 32
( Internal dia. 25 ) ( Internal dia. 25 ) ( External dia. 32
Internal dia. 25 )
Mass kg 25 25 25
5 Sound pressure level (HH/H/L) dB(A) 33/31/29 33/31/29 34/32/30
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 7 stages (FXMQ20/25/32PVE), 13 stages (FXMQ40PVE), 14 stages (FXMQ50/63/80/100/ Btu/h=kW×3412
125PVE), 10 stages (FXMQ140PVE) by remote controller. cfm=m³/min×35.3
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
216 FXMQ-P
EDMT341410C Specifications
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 7 stages (FXMQ20/25/32PVE), 13 stages (FXMQ40PVE), 14 stages (FXMQ50/63/80/100/ Btu/h=kW×3412
125PVE), 10 stages (FXMQ140PVE) by remote controller. cfm=m³/min×35.3
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
FXMQ-P 217
Specifications EDMT341410C
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable in 7 stages (FXMQ20/25/32PVE), 13 stages (FXMQ40PVE), 14 stages (FXMQ50/63/80/100/ Btu/h=kW×3412
125PVE), 10 stages (FXMQ140PVE) by remote controller. cfm=m³/min×35.3
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6. Power input values are based on conditions of rated external static pressure.
7. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external static pressure.
218 FXMQ-P
EDMT341410C Dimensions
2. Dimensions
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE
Unit: mm
3D062541C
11
FXMQ-P 219
Dimensions EDMT341410C
FXMQ40PVE
3D060160H
Unit: mm
220 FXMQ-P
EDMT341410C Dimensions
FXMQ50PVE
3D060159G
Unit: mm
11
FXMQ-P 221
Dimensions EDMT341410C
FXMQ63PVE / FXMQ80PVE
3D060161H
Unit: mm
222 FXMQ-P
EDMT341410C Dimensions
3D060162H
Unit: mm
11
FXMQ-P 223
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE / FXMQ63PVE / FXMQ80PVE /
FXMQ100PVE / FXMQ125PVE / FXMQ140PVE
4D034245M
224 FXMQ-P
EDMT341410C Wiring Diagrams
4. Wiring Diagrams
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE / FXMQ63PVE / FXMQ80PVE /
FXMQ100PVE / FXMQ125PVE / FXMQ140PVE
C: 3D058783F
11
FXMQ-P 225
Electric Characteristics EDMT341410C
5. Electric Characteristics
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE / FXMQ63PVE / FXMQ80PVE /
FXMQ100PVE / FXMQ125PVE / FXMQ140PVE
C: 4D060439D
226 FXMQ-P
EDMT341410C Safety Devices Setting
Model FXMQ20PVE FXMQ25PVE FXMQ32PVE FXMQ40PVE FXMQ50PVE FXMQ63PVE FXMQ80PVE FXMQ100PVE FXMQ125PVE FXMQ140PVE
Printed circuit board fuse 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A 250 V, 3.15 A
Printed circuit board fuse
250 V, 5 A 250 V, 5 A 250 V, 5 A 250 V, 5 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A 250 V, 6.3 A
(Fan driver)
Drain pump thermal fuse °C 145 145 145 145 145 145 145 145 145 145
C: 3D034597M
11
FXMQ-P 227
Capacity Tables EDMT341410C
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXMQ20PVE 20 1.9 1.9 2.1 2.1 2.2 2.0 2.2 1.9 2.2 1.9 2.3 1.8 2.3 1.8
FXMQ25PVE 25 2.5 2.2 2.6 2.3 2.8 2.5 2.8 2.3 2.8 2.2 2.9 2.1 3.0 2.2
FXMQ32PVE 32 3.2 2.6 3.4 2.7 3.5 2.9 3.6 2.8 3.6 2.7 3.7 2.7 3.8 2.6
FXMQ40PVE 40 4.0 3.7 4.2 4.0 4.4 4.2 4.5 3.8 4.6 3.7 4.7 3.5 4.8 3.6
FXMQ50PVE 50 4.9 4.3 5.3 4.7 5.5 5.0 5.6 4.6 5.7 4.5 5.8 4.3 5.9 3.6
FXMQ63PVE 63 6.3 5.1 6.7 5.5 7.0 5.8 7.1 5.5 7.2 5.4 7.3 5.3 7.5 5.2
FXMQ80PVE 80 7.9 6.5 8.5 7.0 8.8 7.4 9.0 7.0 9.1 6.9 9.3 6.6 9.5 6.6
FXMQ100PVE 100 9.9 8.2 10.5 8.8 11.0 9.1 11.2 8.5 11.3 8.4 11.6 8.1 11.8 7.8
FXMQ125PVE 125 12.3 10.2 13.2 10.9 13.8 11.3 14.0 10.5 14.2 10.4 14.5 10.1 14.8 9.6
FXMQ140PVE 140 14.1 11.8 15.0 12.5 15.7 12.8 16.0 12.0 16.2 11.9 16.5 11.5 16.9 11.2
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition.
228 FXMQ-P
EDMT341410C Fan Performances
8. Fan Performances
FXMQ20PVE / FXMQ25PVE
3D062537A
11
FXMQ-P 229
Fan Performances EDMT341410C
FXMQ32PVE
3D062538A
230 FXMQ-P
EDMT341410C Fan Performances
FXMQ40PVE
3D060456C
11
FXMQ-P 231
Fan Performances EDMT341410C
FXMQ50PVE
3D060457D
232 FXMQ-P
EDMT341410C Fan Performances
FXMQ63PVE
3D060458C
11
FXMQ-P 233
Fan Performances EDMT341410C
FXMQ80PVE
3D060459C
234 FXMQ-P
EDMT341410C Fan Performances
FXMQ100PVE
3D060460C
11
FXMQ-P 235
Fan Performances EDMT341410C
FXMQ125PVE
3D060461C
236 FXMQ-P
EDMT341410C Fan Performances
FXMQ140PVE
3D063787
11
FXMQ-P 237
Airflow Auto Adjustment Characteristics EDMT341410C
3D062539A
238 FXMQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXMQ32PVE
3D062540A
11
FXMQ-P 239
Airflow Auto Adjustment Characteristics EDMT341410C
FXMQ40PVE
3D060577D
240 FXMQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXMQ50PVE
3D060578D
11
FXMQ-P 241
Airflow Auto Adjustment Characteristics EDMT341410C
FXMQ63PVE
3D060579D
242 FXMQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXMQ80PVE
3D060580D
11
FXMQ-P 243
Airflow Auto Adjustment Characteristics EDMT341410C
FXMQ100PVE
3D060581D
244 FXMQ-P
EDMT341410C Airflow Auto Adjustment Characteristics
FXMQ125PVE
3D060582D
11
FXMQ-P 245
Sound Levels EDMT341410C
4D062535
FXMQ32PVE
4D062536
246 FXMQ-P
EDMT341410C Sound Levels
FXMQ40PVE
4D060446B
11
FXMQ50PVE
4D060428B
FXMQ-P 247
Sound Levels EDMT341410C
FXMQ63PVE
4D060447B
FXMQ80PVE
4D060429B
248 FXMQ-P
EDMT341410C Sound Levels
FXMQ100PVE
4D060448B
11
FXMQ125PVE
4D060449B
FXMQ-P 249
Sound Levels EDMT341410C
FXMQ140PVE
4D063786
250 FXMQ-P
EDMT341410C Centre of Gravity
11
C: 4D060438C
FXMQ-P 251
Accessories EDMT341410C
12. Accessories
12.1 Optional Accessories (for Unit)
Model
Item
FXMQ20PVE FXMQ25PVE FXMQ32PVE FXMQ40PVE FXMQ50PVE FXMQ63PVE FXMQ80PVE FXMQ100PVE FXMQ125PVE FXMQ140PVE
65% KAF372AA36 KAF372AA56 KAF372AA80 KAF372AA160
High efficiency filter
90% KAF373AA36 KAF373AA56 KAF373AA80 KAF373AA160
Filter chamber KDDF37AA36 KDDF37AA56 KDDF37AA80 KDDF37AA160
Long life replacement filter KAF371AA36 KAF371AA56 KAF371AA80 KAF371AA160
Long life filter chamber kit KAF375AA36 KAF375AA56 KAF375AA80 KAF375AA160
White KTBJ25K36W KTBJ25K56W KTBJ25K80W KTBJ25K160W
Fresh
Service panel KTBJ25K36F KTBJ25K56F KTBJ25K80F KTBJ25K160F
white
Brown KTBJ25K36T KTBJ25K56T KTBJ25K80T KTBJ25K160T
Air discharge adaptor KDAJ25K36A KDAJ25K56A KDAJ25K71A KDAJ25K140A
C: 3D060443D
252 FXMQ-P
EDMT341410C
FXMQ-MA
Ceiling Mounted Duct Type
1. Specifications ......................................................................................254
2. Dimensions .........................................................................................255
3. Piping Diagrams..................................................................................256
4. Wiring Diagrams..................................................................................257
5. Electric Characteristics........................................................................258
6. Safety Devices Setting ........................................................................259
7. Capacity Tables ..................................................................................260
7.1 Cooling Capacity for Te: Auto ..............................................................260
7.2 Cooling Capacity for Te: 9°C................................................................260
8. Fan Performances...............................................................................261
9. Sound Levels ......................................................................................263
10.Centre of Gravity .................................................................................264
11.Accessories.........................................................................................265
11.1 Optional Accessories (for Unit).............................................................265
11.2 Optional Accessories (for Controls)......................................................265 12
FXMQ-MA 253
Specifications EDMT341410C
1. Specifications
Ceiling mounted duct type
Model FXMQ200MAVE FXMQ250MAVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 19,300 24,100
1 2 Cooling capacity Btu/h 76,400 95,500
kW 22.4 28.0
Casing / Colour Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 470×1,380×1,100 470×1,380×1,100
Model D13/4G2DA1×2 D13/4G2DA1×2
Type Sirocco fan Sirocco fan
Motor output ×
W 380×2 380×2
Number of units
m³/min 58/50 72/62
Fan Airflow rate (H/L) l/s 966/833 1,200/1,033
cfm 2,047/1,765 2,542/2,189
External static 50 Hz Pa 221-132 3 270-191 3
pressure 60 Hz Pa 270-132 3 270-147 3
Drive Direct drive Direct drive
Temperature control Microprocessor thermostat for cooling and heating Microprocessor thermostat for cooling and heating
Sound absorbing thermal insulation material Glass fiber Glass fiber
Air filter 4 4
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection)
Piping
Gas pipes mm φ19.1 (Brazing connection) φ22.2 (Brazing connection)
connections
Drain pipe mm PS1B PS1B
Mass kg 137 137
5 Sound pressure 220 V, 50/60 Hz 48/45 48/45
dB(A)
level (H/L) 240 V, 50 Hz 49/45 49/45
Safety devices Fuse, Thermal protector for fan motor Fuse, Thermal protector for fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve
Operation manual, Installation manual, Sealing pads, Operation manual, Installation manual, Sealing pads,
Standard accessories
Connection pipes, Screws, Clamps Connection pipes, Screws, Clamps
Specification C: 3D038814D C: 3D038814D
Drawing No.
Sound level C: 4D035168 C: 4D035169
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. External static pressure is changeable to change over the connectors inside control box, this pressure means Btu/h=kW×3412
"High static pressure-Standard". cfm=m³/min×35.3
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity l/s=m³/min×1000/60
method) 50% or more.
5. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. These values are normally somewhat higher
during actual operation as a result of ambient conditions.
6. Refer to Electric Characteristics for the power input.
254 FXMQ-MA
EDMT341410C Dimensions
2. Dimensions
FXMQ200MAVE / FXMQ250MAVE
Unit: mm
C: 3D038851A
12
FXMQ-MA 255
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXMQ200MAVE / FXMQ250MAVE
4D034245M
256 FXMQ-MA
EDMT341410C Wiring Diagrams
4. Wiring Diagrams
FXMQ200MAVE / FXMQ250MAVE
C: 3D039621E
12
FXMQ-MA 257
Electric Characteristics EDMT341410C
5. Electric Characteristics
FXMQ200MAVE / FXMQ250MAVE
4D040330B
258 FXMQ-MA
EDMT341410C Safety Devices Setting
12
FXMQ-MA 259
Capacity Tables EDMT341410C
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXMQ200MAVE 200 19.8 15.8 21.0 16.9 22.0 17.9 22.4 16.8 22.7 16.3 23.2 15.4 23.7 14.8
FXMQ250MAVE 250 24.7 19.7 26.3 21.1 27.5 22.3 28.0 20.9 28.3 20.3 29.0 19.4 29.6 18.6
260 FXMQ-MA
EDMT341410C Fan Performances
8. Fan Performances
FXMQ200MAVE
3D035172
12
FXMQ-MA 261
Fan Performances EDMT341410C
FXMQ250MAVE
3D035173A
262 FXMQ-MA
EDMT341410C Sound Levels
9. Sound Levels
FXMQ200MAVE
4D035168
12
FXMQ250MAVE
4D035169
FXMQ-MA 263
Centre of Gravity EDMT341410C
4D035171
264 FXMQ-MA
EDMT341410C Accessories
11. Accessories
11.1 Optional Accessories (for Unit)
Model
Item
FXMQ200MAVE FXMQ250MAVE
Drain pump kit KDU30L250VE
65% KAFJ372L280
High efficiency filter
90% KAFJ373L280
Filter chamber KDJ3705L280
Long life replacement filter KAFJ371L280
C: 3D040334D
12
FXMQ-MA 265
Accessories EDMT341410C
266 FXMQ-MA
EDMT341410C
FXHQ-MA
Ceiling Suspended Type
1. Specifications ......................................................................................268
2. Dimensions .........................................................................................269
3. Piping Diagrams..................................................................................272
4. Wiring Diagrams..................................................................................273
5. Electric Characteristics........................................................................274
6. Safety Devices Setting ........................................................................275
7. Capacity Tables ..................................................................................276
7.1 Cooling Capacity for Te: Auto ..............................................................276
7.2 Cooling Capacity for Te: 9°C................................................................276
8. Sound Levels ......................................................................................277
9. Accessories.........................................................................................279
9.1 Optional Accessories (for Unit).............................................................279
9.2 Optional Accessories (for Controls)......................................................279
13
FXHQ-MA 267
Specifications EDMT341410C
1. Specifications
Ceiling suspended type
Model FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 3,100 6,100 9,600
1 2 Cooling capacity Btu/h 12,300 24,200 38,200
kW 3.6 7.1 11.2
Casing colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 195×960×680 195×1,160×680 195×1,400×680
Model 3D12K1AA1 4D12K1AA1 3D12K2AA1
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 62×1 62×1 130×1
Number of units
Fan
m³/min 12/10 17.5/14 25/19.5
Airflow rate (H/L) l/s 200/166 291/233 416/325
cfm 424/353 618/494 883/688
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat for cooling Microprocessor thermostat for cooling Microprocessor thermostat for cooling
Temperature control
and heating and heating and heating
Sound absorbing thermal insulation material Glass wool Glass wool Glass wool
Air filter Resin net (with mold resistant) Resin net (with mold resistant) Resin net (with mold resistant)
Liquid pipes mm φ6.4 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Piping Gas pipes mm φ12.7 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Connections
VP20 VP20 VP20
Drain pipe mm
(External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20) (External dia. 26, Internal dia. 20)
Mass kg 24 28 33
3 Sound pressure level (H/L) dB(A) 36/31 39/34 45/37
Fuse, Fuse, Fuse,
Safety devices
Thermal protector for fan motor Thermal protector for fan motor Thermal protector for fan motor
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Operation manual, Installation Operation manual, Installation Operation manual, Installation
manual, Drain hose, Paper pattern for manual, Drain hose, Paper pattern for manual, Drain hose, Paper pattern for
Standard accessories
installation, Clamp metal, Insulation installation, Clamp metal, Insulation installation, Clamp metal, Insulation
for fitting, Clamps, Washers for fitting, Clamps, Washers for fitting, Clamps, Washers
Specification C: 3D038815A C: 3D038815A C: 3D038815A
Drawing No.
Sound level C: 4D035301 C: 4D035302 C: 4D035303A
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values Btu/h=kW×3412
are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
4. Refer to Electric Characteristics for the power input. l/s=m³/min×1000/60
268 FXHQ-MA
EDMT341410C Dimensions
2. Dimensions
FXHQ32MAVE
Unit: mm
3D038855A
13
FXHQ-MA 269
Dimensions EDMT341410C
FXHQ63MAVE
Unit: mm
3D038856A
270 FXHQ-MA
EDMT341410C Dimensions
FXHQ100MAVE
Unit: mm
3D038857C
13
FXHQ-MA 271
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXHQ32MAVE / FXHQ63MAVE / FXHQ100MAVE
4D034245M
272 FXHQ-MA
FXHQ-MA
EDMT341410C
C: 3D039801D
Wiring Diagrams
273
13
Electric Characteristics EDMT341410C
5. Electric Characteristics
FXHQ32MAVE / FXHQ63MAVE / FXHQ100MAVE
C: 4D035304C
274 FXHQ-MA
EDMT341410C Safety Devices Setting
13
FXHQ-MA 275
Capacity Tables EDMT341410C
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXHQ32MAVE 32 3.2 2.8 3.4 3.1 3.5 3.1 3.6 2.9 3.6 2.6 3.7 2.7 3.8 2.6
FXHQ63MAVE 63 6.3 4.9 6.7 5.3 7.0 5.5 7.1 5.2 7.2 5.1 7.3 4.9 7.5 4.6
FXHQ100MAVE 100 9.9 7.5 10.5 8.0 11.0 8.4 11.2 8.0 11.3 7.8 11.6 7.4 11.8 7.2
276 FXHQ-MA
EDMT341410C Sound Levels
8. Sound Levels
FXHQ32MAVE
4D035301
13
FXHQ63MAVE
4D035302
FXHQ-MA 277
Sound Levels EDMT341410C
FXHQ100MAVE
4D035303A
278 FXHQ-MA
EDMT341410C Accessories
9. Accessories
9.1 Optional Accessories (for Unit)
Model
Item
FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Drain pump kit KDU50N60VE KDU50N125VE
Replacement long-life filter
KAF501DA56 KAF501DA80 KAF501DA112
(Resin net)
L-type piping kit
(for upward direction) KHFP5MA63 KHFP5MA160
4D040446C
13
FXHQ-MA 279
Accessories EDMT341410C
280 FXHQ-MA
EDMT341410C
FXAQ-P
Wall Mounted Type
1. Specifications ......................................................................................282
2. Dimensions .........................................................................................284
3. Piping Diagrams..................................................................................287
4. Wiring Diagrams..................................................................................288
5. Electric Characteristics........................................................................289
6. Safety Devices Setting ........................................................................290
7. Capacity Tables ..................................................................................291
7.1 Cooling Capacity for Te: Auto ..............................................................291
7.2 Cooling Capacity for Te: 9°C................................................................291
8. Sound Levels ......................................................................................292
9. Accessories.........................................................................................295
9.1 Optional Accessories (for Unit).............................................................295
9.2 Optional Accessories (for Controls)......................................................295
14
FXAQ-P 281
Specifications EDMT341410C
1. Specifications
Wall mounted type
Model FXAQ20PVE FXAQ25PVE FXAQ32PVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 1,900 2,400 3,100
1 2 Cooling capacity Btu/h 7,500 9,600 12,300
kW 2.2 2.8 3.6
Casing colour White (3.0Y8.5/0.5) White (3.0Y8.5/0.5) White (3.0Y8.5/0.5)
Dimensions: (H×W×D) mm 290×795×238 290×795×238 290×795×238
Model QCL9661M QCL9661M QCL9661M
Type Cross flow fan Cross flow fan Cross flow fan
Motor output ×
W 40×1 40×1 40×1
Number of units
Fan
m³/min 7.5/4.5 8/5 8.5/5.5
Airflow rate (H/L) l/s 125/75 133/83 142/91
cfm 265/159 282/177 300/194
Drive Direct drive Direct drive Direct drive
Microprocessor thermostat for Microprocessor thermostat for Microprocessor thermostat for
Temperature control
cooling and heating cooling and heating cooling and heating
Foamed polystyrene / Foamed polystyrene / Foamed polystyrene /
Sound absorbing thermal insulation material
Foamed polyethylene Foamed polyethylene Foamed polyethylene
Air filter Resin net (Washable) Resin net (Washable) Resin net (Washable)
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Piping Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
connections
VP13 VP13 VP13
Drain pipe mm
(External dia. 18, Internal dia. 13) (External dia. 18, Internal dia. 13) (External dia. 18, Internal dia. 13)
Mass kg 11 11 11
3 Sound pressure level (H/L) dB(A) 35/31 36/31 38/31
Safety devices Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Operation manual, Installation Operation manual, Installation Operation manual, Installation
manual, Installation panel, Paper manual, Installation panel, Paper manual, Installation panel, Paper
Standard accessories
pattern for installation, Insulation tape, pattern for installation, Insulation tape, pattern for installation, Insulation tape,
Clamps, Screws Clamps, Screws Clamps, Screws
Specification C: 3D077064A C: 3D077064A C: 3D077064A
Drawing No.
Sound level C: 4D077090 C: 4D077091 C: 4D077092
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values Btu/h=kW×3412
are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
4. Refer to Electric Characteristics for the power input. l/s=m³/min×1000/60
282 FXAQ-P
EDMT341410C Specifications
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
14
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values Btu/h=kW×3412
are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
4. Refer to Electric Characteristics for the power input. l/s=m³/min×1000/60
FXAQ-P 283
Dimensions EDMT341410C
2. Dimensions
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE
Unit: mm
3D065064A
284 FXAQ-P
EDMT341410C Dimensions
FXAQ40PVE / FXAQ50PVE
Unit: mm
3D065065A
14
FXAQ-P 285
Dimensions EDMT341410C
FXAQ63PVE
Unit: mm
3D065066A
286 FXAQ-P
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE / FXAQ40PVE / FXAQ50PVE / FXAQ63PVE
14
4D034245M
FXAQ-P 287
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE / FXAQ40PVE / FXAQ50PVE / FXAQ63PVE
3D076498
288 FXAQ-P
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE / FXAQ40PVE / FXAQ50PVE / FXAQ63PVE
14
4D077066
FXAQ-P 289
Safety Devices Setting EDMT341410C
290 FXAQ-P
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXAQ20PVE 20 1.9 1.8 2.1 1.9 2.2 2.0 2.2 1.9 2.2 1.8 2.3 1.8 2.3 1.8
FXAQ25PVE 25 2.5 2.1 2.6 2.2 2.8 2.3 2.8 2.2 2.8 2.1 2.9 2.1 3.0 2.0
FXAQ32PVE 32 3.2 2.4 3.4 2.6 3.5 2.8 3.6 2.6 3.6 2.5 3.7 2.5 3.8 2.4
FXAQ40PVE 40 4.0 3.2 4.2 3.4 4.4 3.6 4.5 3.5 4.6 3.4 4.7 3.3 4.8 3.0
FXAQ50PVE 50 4.9 4.0 5.3 4.3 5.5 4.5 5.6 4.2 5.7 4.2 5.8 4.0 5.9 3.6
FXAQ63PVE 63 6.3 5.1 6.7 5.4 7.0 5.6 7.1 5.3 7.2 5.2 7.3 5.0 7.5 4.5
FXAQ-P 291
Sound Levels EDMT341410C
8. Sound Levels
FXAQ20PVE
4D077090
FXAQ25PVE
4D077091
292 FXAQ-P
EDMT341410C Sound Levels
FXAQ32PVE
4D077092
FXAQ40PVE 14
4D077093
FXAQ-P 293
Sound Levels EDMT341410C
FXAQ50PVE
4D077094
FXAQ63PVE
4D077095
294 FXAQ-P
EDMT341410C Accessories
9. Accessories
9.1 Optional Accessories (for Unit)
Model
Item
FXAQ20PVE FXAQ25PVE FXAQ32PVE FXAQ40PVE FXAQ50PVE FXAQ63PVE
Drain pump kit K-KDU572EVE
14
FXAQ-P 295
Accessories EDMT341410C
296 FXAQ-P
EDMT341410C
FXLQ-MA / FXNQ-MA
Floor Standing Type /
Concealed Floor Standing Type
1. Specifications ......................................................................................298
1.1 FXLQ-MA .............................................................................................298
1.2 FXNQ-MA.............................................................................................300
2. Dimensions .........................................................................................302
2.1 FXLQ-MA .............................................................................................302
2.2 FXNQ-MA.............................................................................................305
3. Piping Diagrams..................................................................................308
4. Wiring Diagrams..................................................................................309
5. Electric Characteristics........................................................................310
6. Safety Devices Setting ........................................................................311
7. Capacity Tables ..................................................................................312
7.1 Cooling Capacity for Te: Auto ..............................................................312
7.2 Cooling Capacity for Te: 9°C................................................................312
8. Sound Levels ......................................................................................313
8.1 FXLQ-MA .............................................................................................313
8.2 FXNQ-MA.............................................................................................316
9. Centre of Gravity .................................................................................319
10.Accessories.........................................................................................320
10.1 Optional Accessories (for Unit).............................................................320
10.2 Optional Accessories (for Controls)......................................................320
15
1. Specifications
1.1 FXLQ-MA
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values cfm=m³/min×35.3
are normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values cfm=m³/min×35.3
are normally somewhat higher as a result of ambient conditions.
4. Refer to Electric Characteristics for the power input.
l/s=m³/min×1000/60 15
1.2 FXNQ-MA
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values cfm=m³/min×35.3
are normally somewhat higher as a result of ambient conditions. l/s=m³/min×1000/60
4. Refer to Electric Characteristics for the power input.
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. kcal/h=kW×860
Btu/h=kW×3412
3. Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values cfm=m³/min×35.3
are normally somewhat higher as a result of ambient conditions.
4. Refer to Electric Characteristics for the power input.
l/s=m³/min×1000/60 15
20 OR MORE
100 OR MORE 100 OR MORE DISCHARGE
1750 OR MORE
FRONT FACE
FXLQ-MA
1000 OR MORE
SUCTION
2. Dimensions
BASE
REQUIRED INSTALLATION SPACE
FXLQ20MAVE / FXLQ25MAVE
1000 222
PERFORATED HOLE FOR PIPING 143
172 15 590 149 (REAR) 88
192
1
600
65
575
2
391
3
301
233
4-12×30 SLOT HOLE
181
70
HOLE FOR REAR MOUNTING
10 42 10 5
156
219 219 13 209 2
184
194
2 GAS PIPE CONNECTION PORT φ12.7 FLARE CONNECTION
102 3 DRAIN PIPE CONNECTION PORT O. D. 21
10
PERFORATED HOLE FOR PIPING 4 SWITCH BOX
WIRING HOLE
(BOTTOM) (BOTTOM) 5 AIR FILTER
C: 3D038860B
FXLQ-MA / FXNQ-MA
EDMT341410C
Unit: mm
EDMT341410C
20 OR MORE
100 OR MORE 100 OR MORE
DISCHARGE
1750 OR MORE
FXLQ-MA / FXNQ-MA
FRONT FACE
1000 OR MORE
SUCTION
BASE
REQUIRED INSTALLATION SPACE
FXLQ32MAVE / FXLQ40MAVE
1140 222
PERFORATED HOLE FOR PIPING 143
172 15 730 149 (REAR) 88
192
1
600
65
575
2
391
3
301
233
4-12×30 SLOT HOLE
181
70
HOLE FOR REAR MOUNTING
10 42 10 5
156
219 219 13 209 2
184
194
1 LIQUID PIPE CONNECTION PORT φ6.4 FLARE CONNECTION
102
10
WIRING HOLE PERFORATED HOLE FOR PIPING 3 DRAIN PIPE CONNECTION PORT O. D. 21
(BOTTOM) (BOTTOM)
4 SWITCH BOX
5 AIR FILTER
C: 3D038861B
303
Dimensions
15
304
Unit: mm
Dimensions
20 OR MORE
100 OR MORE 100 OR MORE
DISCHARGE
1750 OR MORE
FRONT FACE
1000 OR MORE
SUCTION
BASE
REQUIRED INSTALLATION SPACE
FXLQ50MAVE / FXLQ63MAVE
192
1
600
65
575
2
391
3
301
233
4-12×30 SLOT HOLE
181
10 42 10 5
156
219 219 13 209 2
184
194
2 GAS PIPE CONNECTION FLARE CONNECTION
102
10
WIRING HOLE PERFORATED HOLE FOR PIPING 4 SWITCH BOX
(BOTTOM) (BOTTOM)
5 AIR FILTER
C: 3D038862B
FXLQ-MA / FXNQ-MA
EDMT341410C
2.2
Unit: mm
EDMT341410C
20 OR MORE
TOP PLATE 2-12×18 SLOT HOLE
FXLQ-MA / FXNQ-MA
HOLE FOR FIXING 150 OR MORE
FXNQ-MA
FRONT FACE
42
1000 OR MORE
130
FXNQ20MAVE / FXNQ25MAVE
35
(DISCHARGE FLANGE) 199 562 163
(DISCHARGE FLANGE) 218
620 139
5x100=500 6-φ4.7 HOLE 84
TOTAL ON FRONT & REAR 65 74 2-φ4.7 HOLE
TOTAL ON RIGHT & LEFT
11
25
192
1
389
609
2
391
3
42
301
4-12×30 SLOT HOLE
181
233
129
HOLE FOR REAR MOUNTING
3D038863B
305
Dimensions
15
306
Unit: mm
Dimensions
20 OR MORE
TOP PLATE 2-12×18 SLOT HOLE
HOLE FOR FIXING 150 OR MORE
736 TO THE FLOOR
FRONT FACE
42
1000 OR MORE
FXNQ32MAVE / FXNQ40MAVE
130
REQUIRED INSTALLATION SPACE
35
(DISCHARGE FLANGE) 199 702 163
218
(DISCHARGE FLANGE)
760 139
6×100=600 7-φ4.7 HOLE 84
TOTAL ON FRONT & REAR 65 74 2-φ4.7 HOLE
TOTAL ON RIGHT & LEFT
11
25
192
1
389
609
2
3
391
301
42
4-12×30 SLOT HOLE
181
233
129
730 65 LEVEL ADJUSTING SCREW
AS STANDARD ACCESSORY 103
4×M6 152
HOLE FOR FIXING 206 7
TO THE FLOOR
4 5
NUMBER NAME DESCRIPTION
1 LIQUID PIPE CONNECTION PORT φ6.4 FLARE CONNECTION
2 GAS PIPE CONNECTION PORT φ12.7 FLARE CONNECTION
3 DRAIN PIPE CONNECTION PORT O. D. 21
NOTE) 4 SWITCH BOX
1. LOCATION OF UNIT'S NAME PLATE: 5 AIR FILTER
THE RIGHT LOWER CORNER OF FRONT PLATE.
3D038864C
FXLQ-MA / FXNQ-MA
EDMT341410C
EDMT341410C Dimensions
FXNQ50MAVE / FXNQ63MAVE
3D038865C
Unit: mm
15
3. Piping Diagrams
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE / FXLQ40MAVE / FXLQ50MAVE / FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE / FXNQ40MAVE / FXNQ50MAVE / FXNQ63MAVE
4D034245M
4. Wiring Diagrams
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE / FXLQ40MAVE / FXLQ50MAVE / FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE / FXNQ40MAVE / FXNQ50MAVE / FXNQ63MAVE
C: 3D039826G
15
5. Electric Characteristics
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE / FXLQ40MAVE / FXLQ50MAVE / FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE / FXNQ40MAVE / FXNQ50MAVE / FXNQ63MAVE
C: 4D034579E
15
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXLQ20MAVE 20 1.9 1.7 2.1 1.8 2.2 1.8 2.2 1.7 2.2 1.6 2.3 1.5 2.3 1.4
FXLQ25MAVE 25 2.5 1.9 2.6 2.1 2.8 2.2 2.8 2.1 2.8 2.0 2.9 1.9 3.0 1.8
FXLQ32MAVE 32 3.2 2.4 3.4 2.6 3.5 2.7 3.6 2.5 3.6 2.3 3.7 2.3 3.8 2.2
FXLQ40MAVE 40 4.0 3.1 4.2 3.3 4.4 3.4 4.5 3.1 4.6 3.1 4.7 3.0 4.8 2.8
FXLQ50MAVE 50 4.9 3.9 5.3 4.1 5.5 4.2 5.6 3.9 5.7 3.9 5.8 3.7 5.9 3.4
FXLQ63MAVE 63 6.3 4.7 6.7 5.1 7.0 5.3 7.1 4.9 7.2 4.7 7.3 4.5 7.5 4.1
FXNQ20MAVE 20 1.9 1.7 2.1 1.8 2.2 1.8 2.2 1.7 2.2 1.6 2.3 1.5 2.3 1.4
FXNQ25MAVE 25 2.5 1.9 2.6 2.1 2.8 2.2 2.8 2.1 2.8 2.0 2.9 1.9 3.0 1.8
FXNQ32MAVE 32 3.2 2.4 3.4 2.6 3.5 2.7 3.6 2.5 3.6 2.3 3.7 2.3 3.8 2.2
FXNQ40MAVE 40 4.0 3.1 4.2 3.3 4.4 3.4 4.5 3.1 4.6 3.1 4.7 3.0 4.8 2.8
FXNQ50MAVE 50 4.9 3.9 5.3 4.1 5.5 4.2 5.6 3.9 5.7 3.9 5.8 3.7 5.9 3.4
FXNQ63MAVE 63 6.3 4.7 6.7 5.1 7.0 5.3 7.1 4.9 7.2 4.7 7.3 4.5 7.5 4.1
8. Sound Levels
8.1 FXLQ-MA
FXLQ20MAVE / FXLQ25MAVE
4D034528A
15
FXLQ32MAVE
4D034564A
FXLQ40MAVE
4D034565A
FXLQ50MAVE
4D034566A
FXLQ63MAVE
4D034567A
15
8.2 FXNQ-MA
FXNQ20MAVE / FXNQ25MAVE
4D034534B
FXNQ32MAVE
4D034535A
FXNQ40MAVE
4D034536B
FXNQ50MAVE
4D034537B
15
FXNQ63MAVE
4D034538B
9. Centre of Gravity
C: 4D034527C
C: 4D034533C
10. Accessories
10.1 Optional Accessories (for Unit)
Model
Item FXLQ20MAVE FXLQ25MAVE FXLQ32MAVE FXLQ40MAVE FXLQ50MAVE FXLQ63MAVE
FXNQ20MAVE FXNQ25MAVE FXNQ32MAVE FXNQ40MAVE FXNQ50MAVE FXNQ63MAVE
Long life replacement filter KAFJ361K28 KAFJ361K45 KAFJ361K71
C: 4D034574B
FXVQ-N
Floor Standing Duct Type
1. Specifications ......................................................................................322
2. Dimensions .........................................................................................324
3. Piping Diagrams..................................................................................330
4. Wiring Diagrams..................................................................................332
5. Electric Characteristics........................................................................335
6. Safety Devices Setting ........................................................................336
7. Capacity Tables ..................................................................................337
7.1 Cooling Capacity for Te: Auto ..............................................................337
7.2 Cooling Capacity for Te: 9°C................................................................337
8. Fan Characteristics .............................................................................338
9. Fan Characteristics (For Pulley Selection)..........................................344
9.1 Pulley Selection....................................................................................344
9.2 Fan Motor Specifications......................................................................350
9.3 How to Select Motor Pulley ..................................................................350
9.4 Pulley and V Belt Adjustment ...............................................................351
9.5 V Belt Size Table..................................................................................355
10.Sound Levels ......................................................................................356
11.Centre of Gravity .................................................................................359
12.Accessories.........................................................................................360
12.1 Optional Accessories (for Unit) ............................................................360
12.2 Optional Accessories (for Control) .......................................................360
13.Dimensions of Optional Accessories...................................................361
14.Data and Notice in Using the Outdoor-Air Processing Mode ..............366 16
FXVQ-N 321
Specifications EDMT341410C
1. Specifications
Floor standing duct type
Model FXVQ125NY1 FXVQ200NY1 FXVQ250NY1
Power supply 3 phase, 380-415 V, 50 Hz 3 phase, 380-415 V, 50 Hz 3 phase, 380-415 V, 50 Hz
kcal/h 12,000 19,300 24,100
1 2 Cooling capacity Btu/h 47,800 76,400 95,500
kW 14.0 22.4 28.0
Casing / Colour Ivory white (5Y7.5/1) Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm 1,670×750×510 1,670×950×510 1,670×1,170×510
Model D13/4G2BH5Y1 D13/4G3AD5Y1 2D13/4G2BX5Y1
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×
W 750×1 1,500×1 1,500×1
Number of units
Fan m³/min 43 69 86
Airflow rate
cfm 1,518 2,436 3,036
3 External static
Pa 152 217 281
pressure
Drive Belt drive Belt drive Belt drive
Microprocessor thermostat for cooling Microprocessor thermostat for cooling Microprocessor thermostat for cooling
Temperature control
and heating and heating and heating
Long life Long life Long life
Air filter
(mould resistance )
Resin net with
(mould resistance )
Resin net with
( mould resistance )
Resin net with
Liquid pipes mm φ9.5 (Brazing connection) φ9.5 (Brazing connection) φ9.5 (Brazing connection)
4 Piping
Gas pipes mm φ15.9 (Brazing connection) φ19.1 (Brazing connection) φ22.2 (Brazing connection)
connections
Drain pipe Rp1 (PS1B internal thread) Rp1 (PS1B internal thread) Rp1 (PS1B internal thread)
Mass kg 118 144 169
5 Sound pressure level dB(A) 52 56 60
Safety devices Fuse, Overcurrent relay Fuse, Overcurrent relay Fuse, Overcurrent relay
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Connection pipe, Drain plug cap, Connection pipe, Drain plug cap, Connection pipe, Drain plug cap,
Insulation for drain plug, Clamp, Bolt, Insulation for drain plug, Clamp, Bolt, Insulation for drain plug, Clamp, Bolt,
Standard accessories
Nut, Operation manual, Installation Nut, Operation manual, Installation Nut, Operation manual, Installation
manual manual manual
Specification C: 3D095077A C: 3D095077A C: 3D095077A
Drawing No.
Sound level C: 4D095080A C: 4D095081A C: 4D095082A
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Standard external static pressure / Equivalent piping length: 7.5 m, level
difference: 0 m. kcal/h=kW×860
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. Btu/h=kW×3412
cfm=m³/min×35.3
3. The value is the external static pressure with standard pulley.
4. Both liquid pipe and gas pipe need insulation work.
5. Sound level: measured when the air discharge outlet duct (2 m) is attached (anechoic chamber conversion value).
It increases by approximately 5 dB(A) when the plenum chamber is installed to deliver direct airflow.
6. Refer to Electric Characteristics for the power input.
322 FXVQ-N
EDMT341410C Specifications
Liquid pipes mm φ12.7 (Brazing connection) φ15.9 (Brazing connection) φ15.9 (Brazing connection)
4 Piping
Gas pipes mm φ28.6 (Brazing connection) φ28.6 (Brazing connection) φ28.6 (Brazing connection)
connections
Drain pipe Rp1 (PS1B internal thread) Rp1 (PS1B internal thread) Rp1 (PS1B internal thread)
Mass kg 236 281 306
5 Sound pressure level dB(A) 65 62 67
Safety devices Fuse, Overcurrent relay Fuse, Overcurrent relay Fuse, Overcurrent relay
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Connection pipe, Drain plug cap, Connection pipe, Drain plug cap, Connection pipe, Drain plug cap,
Insulation for drain plug, Clamp, Bolt, Insulation for drain plug, Clamp, Bolt, Insulation for drain plug, Clamp, Bolt,
Standard accessories
Nut, Operation manual, Installation Nut, Operation manual, Installation Nut, Operation manual, Installation
manual manual manual
Specification C: 3D095077A C: 3D095077A C: 3D095077A
Drawing No.
Sound level C: 4D095083A C: 4D095088A C: 4D103472
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Standard external static pressure / Equivalent piping length: 7.5 m, level
difference: 0 m. kcal/h=kW×860
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. Btu/h=kW×3412
cfm=m³/min×35.3
3. The value is the external static pressure with standard pulley.
4. Both liquid pipe and gas pipe need insulation work.
5. Sound level: measured when the air discharge outlet duct (2 m) is attached (anechoic chamber conversion value).
It increases by approximately 5 dB(A) when the plenum chamber is installed to deliver direct airflow.
6. Refer to Electric Characteristics for the power input. 16
FXVQ-N 323
Dimensions EDMT341410C
2. Dimensions
FXVQ125NY1
3D081764D
Unit: mm
324 FXVQ-N
EDMT341410C Dimensions
FXVQ200NY1
Unit: mm
3D081765D
16
FXVQ-N 325
Dimensions EDMT341410C
FXVQ250NY1
Unit: mm
3D081766D
326 FXVQ-N
EDMT341410C Dimensions
FXVQ400NY1
3D081767D
Unit: mm
16
FXVQ-N 327
Dimensions EDMT341410C
FXVQ500NY1
3D085649C
Unit: mm
328 FXVQ-N
EDMT341410C Dimensions
FXVQ500NY16
3D103347A
Unit: mm
16
FXVQ-N 329
Piping Diagrams EDMT341410C
3. Piping Diagrams
FXVQ125NY1 / FXVQ200NY1 / FXVQ250NY1
4D081333C
330 FXVQ-N
EDMT341410C Piping Diagrams
16
4D081334C
FXVQ-N 331
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXVQ125NY1 / FXVQ200NY1 / FXVQ250NY1
3D093434D
332 FXVQ-N
EDMT341410C Wiring Diagrams
FXVQ400NY1 / FXVQ500NY1
3D093435C
16
FXVQ-N 333
Wiring Diagrams EDMT341410C
FXVQ500NY16
3D101521B
334 FXVQ-N
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXVQ125NY1 / FXVQ200NY1 / FXVQ250NY1 / FXVQ400NY1 / FXVQ500NY1 / FXVQ500NY16
16
4D095121B
FXVQ-N 335
Safety Devices Setting EDMT341410C
336 FXVQ-N
EDMT341410C Capacity Tables
7. Capacity Tables
7.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXVQ125NY1 125 12.3 10.6 13.2 11.5 13.8 11.9 14.0 10.9 14.2 10.5 14.5 9.8 14.8 9.0
FXVQ200NY1 200 19.8 17.0 21.0 18.4 22.0 18.4 22.4 16.9 22.7 16.4 23.2 15.3 23.7 14.0
FXVQ250NY1 250 24.7 21.2 26.3 22.8 27.5 22.9 28.0 21.2 28.3 20.4 29.0 19.1 29.6 17.5
FXVQ400NY1 400 39.7 33.6 42.3 36.3 44.2 36.9 45.0 34.1 45.5 33.0 46.5 30.9 47.5 28.6
FXVQ500NY1 500 49.4 41.7 52.6 45.0 55.1 47.7 56.0 44.2 56.7 42.7 57.9 39.8 59.1 37.1
FXVQ500NY16 500 49.4 42.4 52.6 45.9 55.1 48.0 56.0 44.7 56.7 42.9 57.9 40.0 59.1 37.4
FXVQ-N 337
Fan Characteristics EDMT341410C
8. Fan Characteristics
FXVQ125NY1
4D095108A
338 FXVQ-N
EDMT341410C Fan Characteristics
FXVQ200NY1
16
4D095109A
FXVQ-N 339
Fan Characteristics EDMT341410C
FXVQ250NY1
4D095111A
340 FXVQ-N
EDMT341410C Fan Characteristics
FXVQ400NY1
16
4D095112A
FXVQ-N 341
Fan Characteristics EDMT341410C
FXVQ500NY1
4D095113A
342 FXVQ-N
EDMT341410C Fan Characteristics
FXVQ500NY16
16
4D103370
FXVQ-N 343
Fan Characteristics (For Pulley Selection) EDMT341410C
FXVQ125NY1
4D095089A
344 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
FXVQ200NY1
16
4D095090A
FXVQ-N 345
Fan Characteristics (For Pulley Selection) EDMT341410C
FXVQ250NY1
4D095091A
346 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
FXVQ400NY1
16
4D095093A
FXVQ-N 347
Fan Characteristics (For Pulley Selection) EDMT341410C
FXVQ500NY1
4D095102A
348 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
FXVQ500NY16
16
4D103362A
FXVQ-N 349
Fan Characteristics (For Pulley Selection) EDMT341410C
2. Shaft length Q 40 50 60 60 80
5. Insulation class E E E E B
Type A and
V Pulley 2. Keyway b 6 8 8 8 10
type B
Lp (D2 – D1)2
Lp = 2C + 1.57 (D1 + D2) +
D2 4C
D1
Lp : Effective center periphery length (mm)
D1 : Pitch diameter of motor pulley (mm)
D2 : Pitch diameter of fan pulley (mm)
C C : Distance between the shafts of the pulleys (mm)
Note: The unit of V belt length (Nominal number) is usually shown in “inch”.
350 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
Pulley specification
3B • 291---- 42
Boss inner diameter The pulley makers give the pulley
(motor shaft diameter: mm) size using the pitch diameter, while
Daikin uses the pulley outer
Pulley outer diameter diameter.
B type pulley Takes 3 belts
Pitch Diameter (the actual diameter of the parts in contact with the belt)
The pulley makers often use the pitch diameter in pulley sizes.
When using air conditioners in duct connection, external static pressure and airflow rate will increase, exceeding the
range of use for standard motors and pulleys. Therefore, it is necessary to change the motor or pulley to deal with
this.
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling
work.
Procedures
1. Following the installation manual, remove the front panel and others.
1) PARALLELISM OF PULLEY
• Adjust the parallelism between fan pulley and motor pulley by measuring the upper and lower points of the V belt
as the following figures so as to satisfy the value in the following table.
(Type 125-250)
16
(1) 4 locations (2) 2 locations
(including
opposite side)
Parallelism
measurement tool*
Loosen nuts (1) and (2) and then adjust the V belt.
(4) 2 locations
(including
opposite side)
Parallelism
measurement tool* Arrow A
Loosen nuts (3) and (4) and then adjust the V belt.
FXVQ-N 351
Fan Characteristics (For Pulley Selection) EDMT341410C
Ruler
Note:
Use a metal ruler, L shape ruler or the like which is measureable the straight line as a parallelism measurement tool.
CAUTION:
If the tension of the V belt or the parallelism of the pulley are not appropriate, vibrations or abnormal sound may be
generated and the useful life of the V belt may be reduced. Make sure to readjust the tension of the V belt once it has
become adapted to the pulley.
When a new belt is first installed, a large amount of powder may be generated from abrasion. Check whether powder
continues to be generated after about half a day of operation, and then remove any dispersed powder.
2) TENSION OF V BELT
Note:
Be sure to conduct a trial operation after replacing the belt and pulley to check the sound and vibration.
• Be sure to adjust the tension of the V belt when replacing the belt and pulley.
• Be sure to re-adjust the tension of the V belt when roughly 50 hours after the first trial operation or after replacing
the belt and pulley (after the belt gets to fit).
Measure the deflection load (W) while pressing down the tension meter vertically to the midpoint of the belt until it
indicates with the proper deflection length (L).
Immediately after operation the V belt will be hot, which may hinder accurate measurement. Therefore, perform
measurement after the belt has returned to a normal temperature.
3P345056-6J
352 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
C
L
W (N)
L=0.016×C [1]
Note:
When replacing the V belt, do not use force as this may result in damage to the belt. Instead, reduce the inter-shaft
distance and then attach it.
Increase 1.15 times of the following deflection load (W) at the initial tensioning when the belt is renewed.
Moreover, measurement should be performed after turning the pulley by hand 2 to 3 times to eliminate any uneven
elongation of the belt.
Belt type Qty Motor output (kW) Motor pulley diameter (mm) Deflection load W (N) per belt
1 0.75 - 99 9.45 ± 0.45
1 0.75 104- 12.6 ± 0.6
A
1 1.5 - 115 15.55 ± 0.75
1 1.5, 2.2 121- 12.6 ± 0.6
1 2.2 Any 19.95 ± 0.95
1 3.7 - 136 31.5 ± 1.5
B 1 3.7 143- 161 26.65 ± 1.25
1 3.7 171 - 22.15 ± 1.05
2 3.7, 5.5 Any 19.95 ± 0.95
Set screw
Shaft
Fig. 1 [Correct] [Wrong]
Fig. 2
Table 1
Size M4 M5 M6 M8 M10 M12
Tightening torque 17.7±1.7 31.4±3.1 44.1±4.4 98.1±9.8 196±19.6 294±29.4
3P345056-6J
FXVQ-N 353
Fan Characteristics (For Pulley Selection) EDMT341410C
2. Take measurements
1) Measure the parallelism of the fan pulley and motor pulley.
2) Measure the tension of the V belt.
3. Make adjustments
In case of FXVQ125 / 200 / 250N
1) Secure the pulley parallelism by adjustment of the motor pulley position and adjustment of fixing nuts (A) (B).
2) Adjust the V belt tension with adjustment nut (C).
Adjustment nut (C)
Motor pulley
Fixing nut
(B)
Fixing nut
(A)
Adjustment Adjustment
nut (C) nut (B)
4. Perform checks
1) Check that the pulley parallelism and the V belt tension are within the criteria.
354 FXVQ-N
EDMT341410C Fan Characteristics (For Pulley Selection)
16
FXVQ-N 355
Sound Levels EDMT341410C
4D095080A
FXVQ200NY1
4D095081A
356 FXVQ-N
EDMT341410C Sound Levels
FXVQ250NY1
4D095082A
FXVQ400NY1
4D095083A
16
FXVQ-N 357
Sound Levels EDMT341410C
FXVQ500NY1
4D095088A
FXVQ500NY16
4D103472
358 FXVQ-N
EDMT341410C Centre of Gravity
16
4D095078B
FXVQ-N 359
Accessories EDMT341410C
12. Accessories
12.1 Optional Accessories (for Unit)
Model
Item
FXVQ125NY1 FXVQ200NY1 FXVQ250NY1 FXVQ400NY1 FXVQ500NY1 FXVQ500NY16
Replacement long-life filter KAFJ261L140 KAFJ261L224 KAFJ261L280 KAFJ261M450 KAFJ261M560
Ultra long-life filter — KAFSJ9A400 KAFSJ9A560
Front suction base flange KD-9A140 KD-9A200 KD-9A280 KD-9A400 KD-9A560
Suction grille KDGF-9A140 KDGF-9A200 KDGF-9A280 KDGF-9A400 KDGF-9A560
Replacement long-life
KAF-91A140 KAF-91A200 KAF-91A280 KAF-91A400 KAF-91A560
filter 1, 2, 3
Front suction
filter chamber Filter Colorimetric
for high chamber method 65% KAF-92A140 KAF-92A200 KAF-92A280 KAF-92A400 KAF-92A560
Option for Replacement
discharge efficiency filter for high high 1, 3
efficiency efficiency
and filter Colorimetric
suction 1, 2 filter method 90% KAF-93A140 KAF-93A200 KAF-93A280 KAF-93A400 KAF-93A560
2, 3
Filter chamber 1, 2 KDDF-9A140 KDDF-9A200 KDDF-9A280 KDDF-9A400 KDDF-9A560
Plenum chamber KPCJ140A KPC5J KPC8J KPCJ400A KPC15JA
Pulley for plenum chamber KPP8JA KPP9JA KPP10JA — 4
Discharge grille for plenum side KD101A10 KD101A20
Fresh air intake kit KD106D10 KDFJ906A560
Rear suction kit KDFJ905A140 KDFJ905A200 KDFJ905A280 KDFJ905A400 KDFJ905A560
Wood base KKWJ9A140 KWF1G5P KWF1G8P KKWJ9A400 KWF1G15
Vibration isolating frame K-ABSG1406A K-ABSG1407A K-ABSG1408A K-ABSG1409A K-ABSG1410A
C: 3D085669H
Notes: 1. When ordering a filter chamber for high efficiency filter (colorimetric method 65%), please order with all the
respective parts.
2. When ordering a filter chamber for high efficiency filter (colorimetric method 90%), please order with all the
respective parts.
3. When replacing with a new filter, please order the replacement filters with the corresponding filter model name.
4. The pulley and V belt are field supply.
Specification
Pulley V belt
FXVQ400NY1 B151 B40
FXVQ500NY1 B143 B39
FXVQ500NY16 B161 B42
360 FXVQ-N
EDMT341410C Dimensions of Optional Accessories
3D083638C
Unit: mm
16
FXVQ-N 361
Dimensions of Optional Accessories EDMT341410C
FXVQ200NY1
Unit: mm
3D083639C
362 FXVQ-N
EDMT341410C Dimensions of Optional Accessories
FXVQ250NY1
Unit: mm
3D083640C
16
FXVQ-N 363
Dimensions of Optional Accessories EDMT341410C
FXVQ400NY1
Unit: mm
3D083641C
364 FXVQ-N
EDMT341410C Dimensions of Optional Accessories
FXVQ500NY1 / FXVQ500NY16
Unit: mm
3D085670C
16
FXVQ-N 365
Data and Notice in Using the Outdoor-Air Processing Mode EDMT341410C
- The combination with an outdoor unit is limited to one indoor unit and one set of outdoor unit (including multiple
connection of outdoor units). The connection of multiple floor standing duct units is prohibited. Connection of floor
standing duct units and other type of indoor units mixed together is prohibited.
• When the outdoor-air processing mode is selected, the airflow range is limited. If the airflow exceeds the specified range,
the product may stop abnormally. On the other hand, if the airflow falls below the specified range, the equipment
reliability may decrease. For details, please see the " Airflow range" section.
• When the outdoor-air processing mode is selected, the machine controls the operation so that the temperature of the
discharge air becomes closer to the preset temperature of the control panel. However, if the air-conditioning load is too
large or too small, the discharge air temperature may not become closer to the preset temperature.
Airflow range
Please set the airflow according to each operation mode. When selecting a pulley, please see "Fan characteristics (For Pulley
Selection)".
Airflow range (m3/min); The value in ( ) is the rated airflow.
Operation mode
FXVQ125NY1 FXVQ200NY1 FXVQ250NY1 FXVQ400NY1 FXVQ500NY1 FXVQ500NY16
Standard operation mode 28 - 50 (43) 42 - 76 (69) 63 - 96 (86) 80 - 144 (134) 120 - 200 (165) 120 - 200 (172)
Outdoor-air processing mode 25 - 29 (27) 38 - 44 (41) 48 - 56 (52) 72 - 85 (78) 99 - 116 (107) 99 - 116 (107)
CJ: CA13A209
Operation limits
366 FXVQ-N
EDMT341410C Data and Notice in Using the Outdoor-Air Processing Mode
Field settings
[In case of VRV IV]
Be sure to set from both (a) Field settings from the indoor unit and (b) Field settings from the outdoor unit.
3. Push the confirmation button (BS3). The present settings of [4.] will be
indicated.
4. Push the operation button (BS2) and adjust the 7 segment "Invalid" (factory set) light off light off 0
display to the figure shown in the right. "Valid" light off light off 1
5. Push the confirmation button (BS3). The setting in [4.] is defined. It will turn to light ON.
The system starts the operation
6. Push the confirmation button (BS3) again. 2 0 0
according to the setting.
7. Push the new page button (BS1). Returned to Normal mode. light off light off light off
FXVQ-N 367
Data and Notice in Using the Outdoor-Air Processing Mode EDMT341410C
Capacity characteristics
JC: 3D057397D
JC: CA13A209
368 FXVQ-N
EDMT341410C
FXBQ-P / FXBPQ-P
Clean Type Air Conditioner
1. Specifications ......................................................................................370
2. Installation Image ................................................................................372
3. Dimensions .........................................................................................373
3.1 Ceiling Inlet Type..................................................................................373
3.2 Lower Wall Inlet Type...........................................................................376
4. Piping Diagrams..................................................................................379
5. Wiring Diagrams..................................................................................380
6. Electric Characteristics........................................................................381
7. Safety Devices Setting ........................................................................382
8. Capacity Tables ..................................................................................383
8.1 Cooling Capacity for Te: Auto ..............................................................383
8.2 Cooling Capacity for Te: 9°C................................................................383
9. Fan Performances...............................................................................384
9.1 50 Hz ....................................................................................................384
10.Sound Levels ......................................................................................387
10.1 50 Hz ....................................................................................................387
11.Centre of Gravity .................................................................................388
12.Accessories.........................................................................................389
12.1 Optional Accessories (for Unit).............................................................389
12.2 Optional Accessories (for Controls)......................................................389
13.Details of Optional Accessories ..........................................................390
13.1 BAF82A63 - Outlet Unit........................................................................390
17
1. Specifications
Clean type air conditioner
Model FXBQ40PVE FXBQ50PVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz
kcal/h 3,900 4,800
1 2 Cooling capacity Btu/h 15,400 19,100
kW 4.5 5.6
Casing / Colour Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 492×1,788×1,000 492×1,788×1,000
Model D11/2D3AE1 D11/2D3AE1
Type Sirocco fan Sirocco fan
Motor output ×
W 160×1 160×1
Number of units
Fan
m³/min 19.5-17.5/18.0-16 19.5-17.5/18.0-16
Airflow rate (HH/H/L) l/s 325-292/300-267 325-292/300-267
cfm 688-618/635-565 688-618/635-565
Drive Direct drive Direct drive
Temperature control Microprocessor thermostat for cooling and heating Microprocessor thermostat for cooling and heating
Sound absorbing thermal insulation material Glass fiber Glass fiber
Air filter – 3 – 3
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection)
Piping
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection)
connections
Drain pipe mm PT1B PT1B
Mass kg 110 110
4 Sound pressure level (H/L) dB(A) 44/42 44/42
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity Btu/h=kW×3412
method) 50% or more. l/s=m³/min×1000/60
4. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions.
5. Refer to Electric Characteristics for the power input.
Notes:
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m. Conversion formulae
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
kcal/h=kW×860
3. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity Btu/h=kW×3412
method) 50% or more. l/s=m³/min×1000/60
4. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are cfm=m³/min×35.3
normally somewhat higher as a result of ambient conditions.
5. Refer to Electric Characteristics for the power input.
17
2. Installation Image
Suction method Ceiling inlet type
Arrange Integrated outlet unit model Separate outlet unit model
Installation image
Use application ICU, delivery room, room for premature baby, Recovery room, etc.
• Air-conditioning to a spot centering around directly beneath the air outlet.
• Give weight to workability saving.
3. Dimensions
3.1 Ceiling Inlet Type
FXBQ40PVE / FXBQ50PVE
3D104654A
Unit: mm
17
FXBQ63PVE
Unit: mm
3D104655A
FXBPQ63PVE
Unit: mm
3D104658A
17
FXBQ40PVE / FXBQ50PVE
Unit: mm
3D104656A
FXBQ63PVE
Unit: mm
3D104657A
17
FXBPQ63PVE
Unit: mm
3D104659A
4. Piping Diagrams
FXBQ40PVE / FXBQ50PVE / FXBQ63PVE / FXBPQ63PVE
C: 4D034245M
17
5. Wiring Diagrams
FXBQ40PVE / FXBQ50PVE / FXBQ63PVE / FXBPQ63PVE
3D100642A
6. Electric Characteristics
FXBQ40PVE / FXBQ50PVE / FXBQ63PVE / FXBPQ63PVE
17
4D104721B
8. Capacity Tables
8.1 Cooling Capacity for Te: Auto
Indoor air temp.
Capacity 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Model
Indication 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FXBQ40PVE 40 4.0 3.7 4.2 3.8 4.4 3.9 4.5 3.6 4.6 3.6 4.7 3.4 4.8 3.2
FXBQ50PVE 50 4.9 4.2 5.3 4.4 5.5 4.5 5.6 4.2 5.7 4.1 5.8 4.0 5.9 3.9
FXBQ63PVE 63 6.3 5.4 6.7 5.6 7.0 5.8 7.1 5.4 7.2 5.3 7.3 5.1 7.5 4.9
FXBPQ63PVE 63 6.3 5.4 6.7 5.6 7.0 5.8 7.1 5.4 7.2 5.3 7.3 5.1 7.5 4.9
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition.
Notes: 1. These capacity tables are for use when selecting a VRV indoor unit. The actual capacity of the VRV system depends on factors such
as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity of the
VRV system satisfies the required heat load.
2. shows rated condition.
17
9. Fan Performances
9.1 50 Hz
FXBQ40PVE / FXBQ50PVE
3D104598
FXBQ63PVE
3D104599 17
FXBPQ63PVE
3D104602
FXBQ40PVE / FXBQ50PVE
4D104724
FXBQ63PVE / FXBPQ63PVE
4D104725
17
4D104722
FXBPQ63PVE
Unit: mm
4D104723
12. Accessories
12.1 Optional Accessories (for Unit)
Model
Item
FXBQ40PVE FXBQ50PVE FXBQ63PVE FXBPQ63PVE
Outlet unit – BAF82A63
Filter HEPA filter BAFH82A50 BAFH82A63
Ceiling suction type BYB82A50C BYB82A63C BYB82A63CP
Panel
Under wall suction type BYB82A50W BYB82A63W BYB82A63WP
Intake outside air flange for duct KDFJ82A80
C: 3D104703
17
3D100539
3D100540
17
Part 3
Outdoor-Air Processing Unit
FXMQ-MF
Outdoor-Air Processing Unit ................................. 395
FXMQ-MF
Outdoor-Air Processing Unit
1. Specifications ......................................................................................396
2. Dimensions .........................................................................................397
2.1 Indoor Units ..........................................................................................397
2.2 Dimensions with Option........................................................................399
3. Piping Diagrams..................................................................................401
4. Wiring Diagrams..................................................................................402
5. Electric Characteristics........................................................................403
6. Safety Devices Setting ........................................................................404
7. Capacity Tables ..................................................................................405
8. Operation Limits ..................................................................................408
9. Fan Performances...............................................................................410
10.Sound Levels ......................................................................................412
11.Centre of Gravity .................................................................................414
12.Accessories.........................................................................................415
12.1 Optional Accessories (for Unit).............................................................415
12.2 Optional Accessories (for Operation Controls).....................................415
18
FXMQ-MF 395
Specifications EDMT341410C
1. Specifications
Model FXMQ125MFV1 FXMQ200MFV1 FXMQ250MFV1
Power supply 1 phase, 220-240 V, 50 Hz 1 phase, 220-240 V, 50 Hz 1 phase, 220-240 V, 50 Hz
kcal/h 12,000 19,300 24,100
1 2 Cooling capacity Btu/h 47,800 76,400 95,500
kW 14.0 22.4 28.0
Casing Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H×W×D) mm 470×744×1,100 470×1,380×1,100 470×1,380×1,100
Model D13/4G2DA1 D13/4G2DA1 D13/4G2DA1
Type Sirocco Fan Sirocco Fan Sirocco Fan
Motor output ×
W 380×1 380×1 380×1
Number of units
m³/min 18 28 35
Fan Airflow rate (H/L) l/s 300 466 583
cfm 635 988 1,236
External 220 V, 50 Hz 185 225 205
static Pa
pressure 240 V, 50 Hz 225 275 255
Drive Direct Drive Direct Drive Direct Drive
Microprocessor Thermostat for Microprocessor Thermostat for Microprocessor Thermostat for
Temperature control
Cooling and Heating Cooling and Heating Cooling and Heating
Sound absorbing thermal insulation material Glass Fiber Glass Fiber Glass Fiber
Air filter 3 3 3
Liquid pipes mm φ9.5 (Flare Connection) φ9.5 (Flare Connection) φ9.5 (Flare Connection)
Piping
Gas pipes mm φ15.9 (Flare Connection) φ19.1 (Brazing Connection) φ22.2 (Brazing Connection)
connections
Drain pipe mm PS1B (female thread) PS1B (female thread) PS1B (female thread)
Mass kg 86 123 123
220 V, 50 Hz 42 47 47
4 Sound pressure level dB(A)
240 V, 50 Hz 43 48 48
Fuse, Fuse, Fuse,
Safety devices
Thermal Protector for Fan Motor Thermal Protector for Fan Motor Thermal Protector for Fan Motor
Refrigerant control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Operation Manual, Installation Manual, Operation Manual, Installation Manual, Operation Manual, Installation Manual,
Standard accessories Sealing Pads, Screws, Clamps Sealing Pads, Connection Pipes, Sealing Pads, Connection Pipes,
Screws, Clamps Screws, Clamps
Specification C: 3D046147B C: 3D046147B C: 3D046147B
Drawing No.
Sound level C: 4D046271 C: 4D046272 C: 4D046273
Notes:
Conversion Formulae
1. Nominal cooling capacities are based on the following conditions:
Outdoor temperature: 33°CDB, 28°CWB (68% RH) kcal/h=kW×860
Btu/h=kW×3412
Discharge set temp.: 18°CDB cfm=m³/min×35.3
Equivalent ref. piping: 7.5 m (Horizontal) l/s=m³/min×1000/60
2. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
3. Air filter is not standard accessory, but please mount it in the duct system of the suction side.
Select its dust collection efficiency (gravity method) 50% or more.
4. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
These values are normally somewhat higher during actual operation as a result of ambient conditions.
5. Refer to Electric Characteristics for the power input.
396 FXMQ-MF
EDMT341410C Dimensions
2. Dimensions
2.1 Indoor Units
FXMQ125MFV1
3D045129B
Unit: mm
18
FXMQ-MF 397
Dimensions EDMT341410C
FXMQ200MFV1 / FXMQ250MFV1
3D045128B
Unit: mm
398 FXMQ-MF
2.2
Unit: mm
FXMQ-MF
EDMT341410C
FXMQ125MFV1
20 - φ4.7 HOLE
1148 (All around)
1 2 300 or less
(0~250)
360
330
685
744
3 × 100=300
222~472
250
5 × 100=500
222
20 - φ7 hole 5 × 100=500 8
Dimensions with Option
A View
650 or more
690 or more
(Service space)
(Service space)
Approx.
300
Inspection hole 600 or more
16 - φ8 HOLE
(All around)
1100 285 3 4
744
529 79
456
7 Water supply port
3 × 100=300
222
6 Drain pipe connection (drain pump kit) VP25(O. D φ32, I. D φ25)
5 Drain pump kit Built-in
8
5 × 100=500
223
C: 3D046155
399
Dimensions
18
400
Unit: mm
Dimensions
32 - φ4.7 HOLE
1148 (All around)
1 2
300 or less
(0~250)
1296
360
330
1380
FXMQ200MFV1 / FXMQ250MFV1
3 × 100=300
222~472
250
222
11 × 100=1100
32 - φ7 hole 11 × 100=1100 8
(All around) 1200
1230
A View
650 or more
690 or more
(Service space)
(Service space)
Approx.
300
Inspection hole 600 or more
16 - φ8 HOLE
(All around)
1100 285 3 4
1380
529 79
A
200
330
360
456
8 Drain hose Attached to Drain pump kit
3 × 100=300
222
7 Water supply port
6 Drain pipe connection (drain pump kit) VP25 (O. D φ32, I. D φ25)
8
223
C: 3D046154
EDMT341410C
FXMQ-MF
EDMT341410C Piping Diagrams
3. Piping Diagrams
FXMQ125MFV1 / FXMQ200MFV1 / FXMQ250MFV1
4D018650D
18
FXMQ-MF 401
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
FXMQ125MFV1 / FXMQ200MFV1 / FXMQ250MFV1
C: 3D044996E
402 FXMQ-MF
EDMT341410C Electric Characteristics
5. Electric Characteristics
FXMQ125MFV1 / FXMQ200MFV1 / FXMQ250MFV1
18
C: 4D046146B
FXMQ-MF 403
Safety Devices Setting EDMT341410C
404 FXMQ-MF
EDMT341410C Capacity Tables
7. Capacity Tables
FXMQ125MFV1
C: 4D046308D
18
FXMQ-MF 405
Capacity Tables EDMT341410C
FXMQ200MFV1
C: 4D046309D
406 FXMQ-MF
EDMT341410C Capacity Tables
FXMQ250MFV1
C: 4D046310D
18
FXMQ-MF 407
Operation Limits EDMT341410C
8. Operation Limits
FXMQ125MFV1
3D046312B
FXMQ200MFV1
3D047750B
408 FXMQ-MF
EDMT341410C Operation Limits
FXMQ250MFV1
3D046313C
18
FXMQ-MF 409
Fan Performances EDMT341410C
9. Fan Performances
FXMQ125MFV1
3D046267A
FXMQ200MFV1
3D046266A
410 FXMQ-MF
EDMT341410C Fan Performances
FXMQ250MFV1
3D046265A
18
FXMQ-MF 411
Sound Levels EDMT341410C
4D046271
FXMQ200MFV1
4D046272
412 FXMQ-MF
EDMT341410C Sound Levels
FXMQ250MFV1
4D046273
18
FXMQ-MF 413
Centre of Gravity EDMT341410C
4D046143C
414 FXMQ-MF
EDMT341410C Accessories
12. Accessories
12.1 Optional Accessories (for Unit)
Model
Item
FXMQ125MFV1 FXMQ200MFV1 FXMQ250MFV1
Drain pump kit KDU30L250VE
65% KAFJ372L140 KAFJ372L280
High efficiency filter
90% KAFJ373L140 KAFJ373L280
Filter chamber 1 KDJ3705L140 KDJ3705L280
Long life replacement filter KAFJ371L140 KAFJ371L280
C: 3D046270
Notes:
1. Filter chamber has a suction-type flange. (Main unit does not have.)
· Dimensions and weight of the equipment may vary depending on the options used.
· Some options may not be usable due to the equipment installation conditions, so please confirm prior to ordering.
· Some options may not be used in combination.
· Operating sound may increase somewhat depending on the options used.
18
FXMQ-MF 415
Accessories EDMT341410C
416 FXMQ-MF
EDMT341410C
Part 4
Residential Indoor Units
with Connection to
BP Units
Cooling Only
<SPLIT>
FDKS25EAVMB FTKJ25NVMW FTKS25DVM
FDKS35EAVMB FTKJ25NVMS FTKS35DVM
FDKS25CAVMB FTKJ35NVMW FTKS50BVMA
FDKS35CAVMB FTKJ35NVMS FTKS50FVM
FDKS50CVMB FTKJ50NVMW FTKS60FVM
FDKS60CVMB FTKJ50NVMS FTKS71FVM
FTKJ25NVMMW
FTKJ25NVMMS
FTKJ35NVMMW
FTKJ35NVMMS
FTKJ50NVMMW
FTKJ50NVMMS
FTKJ25NVMVW
FTKJ25NVMVS
FTKJ35NVMVW
FTKJ35NVMVS
FTKJ50NVMVW
FTKJ50NVMVS 19
1. Power Supply ......................................................................................419
2. Specifications ......................................................................................420
2.1 Cooling Only.........................................................................................420
3. Dimensions .........................................................................................427
3.1 Indoor Units ..........................................................................................427
4. Piping Diagrams..................................................................................436
4.1 Indoor Units ..........................................................................................436
5. Wiring Diagrams..................................................................................440
5.1 Indoor Units ..........................................................................................440
6. Electric Characteristics........................................................................446
7. Capacity Tables ..................................................................................447
7.1 Cooling Capacity ..................................................................................447
8. Fan Characteristics .............................................................................448
1. Power Supply
Cooling Only
Indoor unit BP unit Power supply
Slim ceiling mounted duct FDKS25EAVMB BPMKS967A3 1 phase,
type FDKS35EAVMB BPMKS967A2 220-240/220-230 V,
50/60 Hz
FDKS25CAVMB
FDKS35CAVMB
FDKS50CVMB
FDKS60CVMB
Wall mounted type FTKJ25NVMW
FTKJ25NVMS
FTKJ35NVMW
FTKJ35NVMS
FTKJ50NVMW
FTKJ50NVMS
FTKJ25NVMMW
FTKJ25NVMMS
FTKJ35NVMMW
FTKJ35NVMMS
FTKJ50NVMMW
FTKJ50NVMMS
FTKJ25NVMVW
FTKJ25NVMVS
FTKJ35NVMVW
FTKJ35NVMVS
FTKJ50NVMVW
FTKJ50NVMVS
FTKS25DVM
FTKS35DVM
FTKS50BVMA
FTKS50FVM
FTKS60FVM
FTKS71FVM
19
2. Specifications
2.1 Cooling Only
Notes:
Conversion formulae
1. The operating sound is based on the rear side suction inlet and the external static pressure 30 Pa.
Operating sound for under side suction inlet: [operating sound for rear side suction inlet]+6 dB. kcal/h=kW×860
Btu/h=kW×3414
However, when installation to which the external static pressure becomes low is carried out, cfm=m³/min×35.3
6 dB or more may go up.
2. Refer to Electric Characteristics for the power input.
FDKS50CVMB FDKS60CVMB
Model
Cooling Cooling
Front panel colour — —
m³/min 12.0/11.0/10.0/8.4 16.0/14.8/13.5/11.2
Airflow rate (H/M/L/SL)
cfm 424/388/353/297 565/522/477/395
Type Sirocco fan Sirocco fan
Fan Motor output W 130 130
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 200×900×620 200×1,100×620
Packaged dimensions (H×W×D) mm 266×1,106×751 266×1,306×751
Weight kg 27 30
Gross weight kg 34 37
Sound pressure level (H/M/L/SL) dB(A) 37/35/33/31 38/36/34/32
External static pressure Pa 40 40
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ12.7 φ12.7
Drain mm VP20 (O.D. φ26 / I.D. φ20) VP20 (O.D. φ26 / I.D. φ20)
Drawing No. C: 3D052134A C: 3D052135
Notes:
1. The operating sound is based on the rear side suction inlet and the external static pressure 40 Pa.
Operating sound for under side suction inlet: [operating sound for rear side suction inlet]+5 dB.
However, when installation to which the external static pressure becomes low is carried out,
5 dB or more may go up.
2. Refer to Electric Characteristics for the power input.
Conversion formulae
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
19
FTKJ35NVMW FTKJ35NVMS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/7.8/4.8/2.9 10.9/7.8/4.8/2.9
Airflow rates (H/M/L/SL)
cfm 385/276/168/102 385/276/168/102
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 45/34/26/20 45/34/26/20
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 9.5 φ 9.5
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090398 C: 3D090401
FTKJ50NVMW FTKJ50NVMS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/8.9/6.8/5.5 10.9/8.9/6.8/5.5
Airflow rates (H/M/L/SL)
cfm 385/313/239/194 385/313/239/194
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 46/40/35/29 46/40/35/29
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 12.7 φ 12.7
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090399 C: 3D090402
Note:
1. Refer to Electric Characteristics for the power input. Conversion formulae
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
FTKJ35NVMMW FTKJ35NVMMS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/7.8/4.8/2.9 10.9/7.8/4.8/2.9
Airflow rates (H/M/L/SL)
cfm 385/276/168/102 385/276/168/102
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 45/34/26/20 45/34/26/20
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 9.5 φ 9.5
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090377 C: 3D090390
FTKJ50NVMMW FTKJ50NVMMS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/8.9/6.8/5.5 10.9/8.9/6.8/5.5
Airflow rates (H/M/L/SL)
cfm 385/313/239/194 385/313/239/194
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof 19
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 46/40/35/29 46/40/35/29
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 12.7 φ 12.7
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090388 C: 3D090391
Note:
1. Refer to Electric Characteristics for the power input. Conversion formulae
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
FTKJ35NVMVW FTKJ35NVMVS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/7.8/4.8/2.9 10.9/7.8/4.8/2.9
Airflow rates (H/M/L/SL)
cfm 385/276/168/102 385/276/168/102
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 45/34/26/20 45/34/26/20
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 9.5 φ 9.5
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090318A C: 3D090314A
FTKJ50NVMVW FTKJ50NVMVS
Model
Cooling Cooling
Front panel colour White Silver
m³/min 10.9/8.9/6.8/5.5 10.9/8.9/6.8/5.5
Airflow rates (H/M/L/SL)
cfm 385/313/239/194 385/313/239/194
Type Cross flow fan Cross flow fan
Fan Motor output W 29 29
Speed Steps 5 Steps, Quiet, Auto 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downwards Right, Left, Horizontal, Downwards
Air filter Removable, Washable, Mildew proof Removable, Washable, Mildew proof
Temperature control Microcomputer control Microcomputer control
Dimensions (H×W×D) mm 303×998×212 303×998×212
Packaged dimensions (H×W×D) mm 322×1,101×389 322×1,101×389
Weight kg 12 12
Gross weight kg 16 16
Sound pressure level (H/M/L/SL) dB(A) 46/40/35/29 46/40/35/29
Heat insulation Both liquid and gas pipes Both liquid and gas pipes
Liquid mm φ 6.4 φ 6.4
Piping
connection
Gas mm φ 12.7 φ 12.7
Drain mm φ 18.0 φ 18.0
Drawing No. C: 3D090319B C: 3D090316B
Note:
1. Refer to Electric Characteristics for the power input. Conversion formulae
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
FTKS50BVMA
Model
Cooling
Front panel colour White
m³/min 11.4/9.8/8.7/7.7
Airflow rate (H/M/L/SL)
cfm 402/346/307/272
Type Cross flow fan
Fan Motor output W 40
Speed Steps 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downward
Air filter Removable, Washable, Mildew proof
Temperature control Microcomputer control
Dimensions (H×W×D) mm 290×795×238
Packaged dimensions (H×W×D) mm 280×840×338
Weight kg 9
Gross weight kg 13
Sound pressure level (H/M/L/SL) dB(A) 44/40/35/32
Heat insulation Both liquid and gas pipes
Liquid mm φ 6.4
Piping
connection
Gas mm φ12.7
Drain mm φ18.0
Drawing No. C: 3D047569
Note:
Conversion formulae
1. Refer to Electric Characteristics for the power input.
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
19
FTKS71FVM
Model
Cooling
Front panel colour White
m³/min 17.4/14.6/11.9/10.7
Airflow rate (H/M/L/SL)
cfm 614/515/420/378
Type Cross flow fan
Fan Motor output W 43
Speed Steps 5 Steps, Quiet, Auto
Air direction control Right, Left, Horizontal, Downward
Air filter Removable, Washable, Mildew proof
Temperature control Microcomputer control
Dimensions (H×W×D) mm 290×1,050×238
Packaged dimensions (H×W×D) mm 337×1,147×366
Weight kg 12
Gross weight kg 17
Sound pressure level (H/M/L/SL) dB(A) 46/42/37/34
Heat insulation Both liquid and gas pipes
Liquid mm φ 6.4
Piping
connection
Gas mm φ15.9
Drain mm φ18.0
Drawing No. C: 3D056227
Note:
Conversion formulae
1. Refer to Electric Characteristics for the power input.
kcal/h=kW×860
Btu/h=kW×3414
cfm=m³/min×35.3
3. Dimensions
3.1 Indoor Units
3.1.1 Slim Ceiling Mounted Duct Type
FDKS25EAVMB / FDKS35EAVMB
3D050379G
Unit: mm
19
3D045486M
Unit: mm
FDKS60CVMB
3D045487J
Unit: mm
19
3D090739B
FTKJ50NVMW / FTKJ50NVMS
FTKJ50NVMMW / FTKJ50NVMMS
FTKJ50NVMVW / FTKJ50NVMVS
Unit: mm
3D090741B
19
FTKS25DVM / FTKS35DVM
3D047958G
Unit: mm
FTKS50BVMA
Unit: mm
3D044774A
19
AIR FLOW(INDOOR)
Dimensions
(SPACE FOR
MAINTENANCE)
MIN.50 MIN.50
(SPACE FOR
INCLUDING REQUIRED SPACE MAINTENANCE)
( INSTALLATION PLATE )
240
238
OPERATION LAMP
MODEL NAME
SIGNAL RECEIVER PLATE
INDOOR UNIT ON/OFF
SWITCH TERMINAL BLOCK WITH
290
EARTH TERMINAL
ROOM TEMP. THERMISTOR
(INSIDE)
(INSIDE)
INTELLIGENT EYE SENSOR
TIMER LAMP GAS PIPE φ12.7 CuT DRAIN HOSE FOR VP13
FRONT GRILLE FIXING SCREWS HOME LEAVE LAMP (THE LENGTH OF PIPE OUTSIDE (CONNECTING PART
FLAPS (INSIDE) THE UNIT : ABOUT 430) I. D. 14.0, O. D. 18.0)
(THE HOSE LENGTH OF
LIQUID PIPE φ6.4 CuT OUTSIDE THE UNIT :
SIGNAL (THE LENGTH OF PIPE OUTSIDE ABOUT 530)
TRANSMITTER THE UNIT : ABOUT 480)
18 1050
58
BLADE ANGLES
893.5 52.5
30
HORIZONTAL BLADE
(AUTOMATIC)
COOLING DRY 14.5
163
155.5
290
10°
52
5°
40° 10°
35° 5°
40°
35°
WIRELESS REMOTE FAN WALL HOLE
60
52
3D055868A
AIR FLOW(INDOOR)
FTKS71FVM
(SPACE FOR
MAINTENANCE)
MIN.50 MIN.50
(SPACE FOR
INCLUDING REQUIRED SPACE MAINTENANCE)
( INSTALLATION PLATE )
240
238
OPERATION LAMP
MODEL NAME
SIGNAL RECEIVER PLATE
INDOOR UNIT ON/OFF
290
TERMINAL BLOCK WITH
ROOM TEMP. THERMISTOR EARTH TERMINAL
(INSIDE) (INSIDE)
INTELLIGENT EYE SENSOR
TIMER LAMP GAS PIPE φ15.9 CuT DRAIN HOSE FOR VP13
FRONT GRILLE FIXING SCREWS HOME LEAVE LAMP (THE LENGTH OF PIPE OUTSIDE (CONNECTING PART
(INSIDE) THE UNIT : ABOUT 430) I. D. 14.0, O. D. 18.0)
FLAPS
(THE HOSE LENGTH OF
LIQUID PIPE φ6.4 CuT OUTSIDE THE UNIT :
SIGNAL (THE LENGTH OF PIPE OUTSIDE ABOUT 530)
TRANSMITTER THE UNIT : ABOUT 480)
58 18 1050
BLADE ANGLES
893.5 52.5
30
HORIZONTAL BLADE
(AUTOMATIC)
COOLING DRY 14.5
163
155.5
290
10°
52
5°
40° 10° 5°
35°
40°
35°
WIRELESS REMOTE FAN WALL HOLE
VERTICAL BLADE(AUTOMATIC) 60
52
99.5
CONTROLLER φ80 HOLE
5° WALL HOLE FOR STANDARD LOCATIONS OF WALL HOLES
(ARC433B71) EMBEDDED PIPING
5° 50° 50° φ80 HOLE
55°
55°
3D055869A
Dimensions
435
19
Piping Diagrams EDMT341410C
4. Piping Diagrams
4.1 Indoor Units
4.1.1 Slim Ceiling Mounted Duct Type
4D045449W
4D090745A
FTKJ50NVMW / FTKJ50NVMS
FTKJ50NVMMW / FTKJ50NVMMS
FTKJ50NVMVW / FTKJ50NVMVS
19
4D090743A
FTKS25DVM / FTKS35DVM
4D050757E
FTKS50BVMA
4D040081Y
FTKS50FVM / FTKS60FVM
4D054932J
FTKS71FVM
19
4D050919L
5. Wiring Diagrams
5.1 Indoor Units
5.1.1 Slim Ceiling Mounted Duct Type
C: 3D045012P
C: 3D085644G
BP unit
19
FTKS25DVM / FTKS35DVM
C: 3D046453H
19
FTKS50BVMA
C: 3D038065L
C: 3D038530U
19
6. Electric Characteristics
Units Power supply IFM Input (W)
Model Hz Volts Voltage range MCA MFA kW FLA Cooling
FDKS25EAVMB Max. 253 V
50 Hz 230 V 0.6 15 0.062 0.5 71
FDKS35EAVMB Min. 207 V
FDKS25CAVMB
0.8 15 0.062 0.6 100
FDKS35CAVMB Max. 253 V
50 Hz 230 V
FDKS50CVMB Min. 207 V 0.9 0.7 140
15 0.130
FDKS60CVMB 1.0 0.8 160
FTKJ25NVMW 0.2 15 0.029 0.12 23
FTKJ25NVMS 0.2 15 0.029 0.12 23
FTKJ35NVMW Max. 264 V 0.2 15 0.029 0.16 33
50 Hz 220-240 V
FTKJ35NVMS Min. 198 V 0.2 15 0.029 0.16 33
FTKJ50NVMW 0.2 15 0.029 0.16 33
FTKJ50NVMS 0.2 15 0.029 0.16 33
FTKJ25NVMW 0.2 15 0.029 0.12 23
FTKJ25NVMS 0.2 15 0.029 0.12 23
FTKJ35NVMW Max. 253 V 0.2 15 0.029 0.16 33
60 Hz 220-230 V Min. 198 V
FTKJ35NVMS 0.2 15 0.029 0.16 33
FTKJ50NVMW 0.2 15 0.029 0.16 33
FTKJ50NVMS 0.2 15 0.029 0.16 33
FTKJ25NVMMW 0.2 15 0.029 0.12 23
FTKJ25NVMMS 0.2 15 0.029 0.12 23
FTKJ35NVMMW Max. 264 V 0.2 15 0.029 0.16 33
50 Hz 220-240 V
FTKJ35NVMMS Min. 198 V 0.2 15 0.029 0.16 33
FTKJ50NVMMW 0.2 15 0.029 0.16 33
FTKJ50NVMMS 0.2 15 0.029 0.16 33
FTKJ25NVMMW 0.2 15 0.029 0.12 23
FTKJ25NVMMS 0.2 15 0.029 0.12 23
FTKJ35NVMMW Max. 253 V 0.2 15 0.029 0.16 33
60 Hz 220-230 V Min. 198 V
FTKJ35NVMMS 0.2 15 0.029 0.16 33
FTKJ50NVMMW 0.2 15 0.029 0.16 33
FTKJ50NVMMS 0.2 15 0.029 0.16 33
FTKJ25NVMVW 0.2 15 0.029 0.12 23
FTKJ25NVMVS 0.2 15 0.029 0.12 23
FTKJ35NVMVW Max. 264 V 0.2 15 0.029 0.16 33
50 Hz 220-240 V
FTKJ35NVMVS Min. 198 V 0.2 15 0.029 0.16 33
FTKJ50NVMVW 0.2 15 0.029 0.16 33
FTKJ50NVMVS 0.2 15 0.029 0.16 33
FTKJ25NVMVW 0.2 15 0.029 0.12 23
FTKJ25NVMVS 0.2 15 0.029 0.12 23
FTKJ35NVMVW Max. 253 V 0.2 15 0.029 0.16 33
60 Hz 220-230 V
FTKJ35NVMVS Min. 198 V 0.2 15 0.029 0.16 33
FTKJ50NVMVW 0.2 15 0.029 0.16 33
FTKJ50NVMVS 0.2 15 0.029 0.16 33
FTKS25DVM Max. 264 V 35
50 Hz 220-240 V Min. 198 V 0.2 15 0.040 0.14
FTKS35DVM 40
FTKS25DVM Max. 253 V 35
60 Hz 220-230 V 0.2 15 0.040 0.14
FTKS35DVM Min. 198 V 40
Max. 264 V
FTKS50BVMA 50 Hz 220-240 V 0.2 15 0.040 0.18 40
Min. 198 V
Max. 253 V
FTKS50BVMA 60 Hz 220-230 V 0.2 15 0.040 0.18 40
Min. 198 V
FTKS50FVM 0.12 34
Max. 264 V
FTKS60FVM 50 Hz 220-240 V 0.2 15 0.043 0.14 40
Min. 198 V
FTKS71FVM 0.16 45
FTKS50FVM 0.12 34
Max. 253 V
FTKS60FVM 60 Hz 220-230 V 0.2 15 0.043 0.14 40
Min. 198 V
FTKS71FVM 0.16 45
7. Capacity Tables
7.1 Cooling Capacity
Indoor air temp.
Airflow 14°CWB 16°CWB 18°CWB 19°CWB 20°CWB 22°CWB 24°CWB
Capacity rate
Model
indication
(m3 / min) 20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
FDKS25EAVMB 25 8.7 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FDKS35EAVMB 35 8.7 2.0 1.9 2.5 2.3 3.2 2.6 3.5 2.7 3.8 2.8 4.0 2.6 4.3 2.7
FDKS25CAVMB 25 9.5 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FDKS35CAVMB 35 10.0 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FDKS50CVMB 50 12.0 2.9 2.7 3.6 3.2 4.5 3.7 5.0 3.8 5.4 3.9 5.8 3.7 6.1 3.8
FDKS60CVMB 60 16.0 3.5 3.4 4.3 4.0 5.4 4.6 6.0 4.8 6.5 4.9 6.9 4.5 7.3 4.6
FTKJ25NVMW 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ25NVMS 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ35NVMW 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ35NVMS 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ50NVMW 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKJ50NVMS 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKJ25NVMMW 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ25NVMMS 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ35NVMMW 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ35NVMMS 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ50NVMMW 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKJ50NVMMS 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKJ25NVMVW 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ25NVMVS 25 8.9 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKJ35NVMVW 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ35NVMVS 35 10.9 2.0 2.0 2.5 2.4 3.2 2.7 3.5 2.8 3.8 2.9 4.0 2.6 4.3 2.7
FTKJ50NVMVW 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKJ50NVMVS 50 10.9 2.9 2.6 3.6 3.0 4.5 3.5 5.0 3.7 5.4 3.7 5.8 3.7 6.1 3.6
FTKS25DVM 25 8.7 1.5 1.4 1.8 1.7 2.3 1.9 2.5 2.0 2.7 2.1 2.9 1.9 3.1 1.9
FTKS35DVM 35 8.9 2.0 1.9 2.5 2.3 3.2 2.6 3.5 2.7 3.8 2.8 4.0 2.6 4.3 2.7
FTKS50BVMA 50 11.4 2.9 2.6 3.6 3.1 4.5 3.6 5.0 3.7 5.4 3.8 5.8 3.7 6.1 3.7
FTKS50FVM 50 14.7 2.9 2.9 3.6 3.4 4.5 3.9 5.0 4.0 5.4 4.1 5.8 3.7 6.1 3.9
FTKS60FVM 60 16.2 3.5 3.4 4.3 4.0 5.4 4.7 6.0 4.8 6.5 4.9 6.9 4.5 7.3 4.6
FTKS71FVM 71 17.4 4.1 3.9 5.0 4.5 6.4 5.3 7.1 5.5 7.7 5.6 8.2 5.3 8.7 5.5
Notes: 1. These capacity tables are for use when selecting a residential indoor unit. The actual capacity of the VRV system depends on factors
such as the selected model of outdoor units, outdoor air temperature and piping length. Please confirm that the corrected capacity
of the VRV system satisfies the required heat load.
2. Capacities are based on the following conditions.
Between the indoor unit and the outdoor unit:
(1) Equivalent refrigerant piping length: 7.5 m
(2) Level difference: 0m
3. shows rated condition. 19
8. Fan Characteristics
8.1 Slim Ceiling Mounted Duct Type
FDKS25EAVMB / FDKS35EAVMB
C: 3D051853D
FDKS25CAVMB
C: 3D045760G
FDKS35CAVMB
C: 3D045761G
FDKS50CVMB
19
C: 3D045762H
FDKS60CVMB
C: 3D045763G
9. Sound Levels
9.1 Indoor Units
9.1.1 Slim Ceiling Mounted Duct Type
FDKS25EAVMB / FDKS35EAVMB
C: 4D051868E
FDKS25CAVMB
C: 4D046333F
19
FDKS35CAVMB
C: 4D046334F
FDKS50CVMB
C: 4D046335G
FDKS60CVMB
C: 4D046336F
19
FTKJ25NVMW / FTKJ25NVMS
FTKJ25NVMMW / FTKJ25NVMMS
FTKJ25NVMVW / FTKJ25NVMVS
C: 4D093568
FTKJ35NVMW / FTKJ35NVMS
FTKJ35NVMMW / FTKJ35NVMMS
FTKJ35NVMVW / FTKJ35NVMVS
C: 4D093606
FTKJ50NVMW / FTKJ50NVMS
FTKJ50NVMMW / FTKJ50NVMMS
FTKJ50NVMVW / FTKJ50NVMVS
C: 4D093653A
19
FTKS25DVM
C: 4D048279D
FTKS35DVM
C: 4D048814
FTKS50BVMA
C: 4D040303A
FTKS50FVM
C: 4D056195B
19
FTKS60FVM
C: 4D040304L
FTKS71FVM
C: 4D040305N
10. Accessories
10.1 Optional Accessories (for Indoor Unit)
10.1.1 Slim ceiling mounted duct type
FDKS25EAVMB FDKS25CAVMB
No. Option name FDKS35CAVMB FDKS60CVMB
FDKS35EAVMB FDKS50CVMB
1 Insulation kit for high humidity KDT25N32 KDT25N50 KDT25N63
FTKJ25NVMW
FTKJ25NVMS
FTKJ35NVMW
FTKJ35NVMS
FTKJ50NVMW
FTKJ50NVMS
FTKJ25NVMMW
FTKJ25NVMMS FTKS50BVMA
FTKJ35NVMMW FTKS25DVM FTKS50FVM
No. Option name FTKJ35NVMMS FTKS35DVM FTKS60FVM
FTKJ50NVMMW FTKS71FVM
FTKJ50NVMMS
FTKJ25NVMVW
FTKJ25NVMVS
FTKJ35NVMVW
FTKJ35NVMVS
FTKJ50NVMVW
FTKJ50NVMVS
Titanium apatite photocatalytic
1 air-purifying filter KAF970A46 KAF971B42
(without frame)
19
FDKS25EAVMB / FDKS35EAVMB
Unit: mm
4D049301J
4D046081N
FDKS60CVMB
Unit: mm
4D046082J
11.2 FTKJ
19
4D090742B
11.3 FTKS
FTKS25DVM / FTKS35DVM
Unit: mm
4D048210Y
FTKS50BVMA
Unit: mm
4D040311J
4D040313Y
19
Part 5
BP Units
<BP Units>
BPMKS967A3
BPMKS967A2
1. Specifications ......................................................................................466
1.1 BP Units ...............................................................................................466
2. Dimensions .........................................................................................467
2.1 BP Units ...............................................................................................467
3. Piping Diagrams..................................................................................469
3.1 BP Units ...............................................................................................469
4. Wiring Diagrams..................................................................................470
4.1 BP Units ...............................................................................................470
5. Electric Characteristics........................................................................471
6. Accessories.........................................................................................471
6.1 Optional Accessories............................................................................471
7. Centre of Gravity .................................................................................472
8. Installation ...........................................................................................473
20
BP Units 465
Specifications EDMT341410C
1. Specifications
1.1 BP Units
Model BPMKS967A3 BPMKS967A2
Power supply 1 phase, 220-240/220-230 V, 50/60 Hz
Connectable indoor units 1~3 Units 1~2 Units
Casing color Paintingless
Power consumption W 10 10
Running current A 0.05 0.05
Refrigerant type R410A
Dimension (H×W×D) mm 180×294(650)*×350
Package dimension (H×W×D) mm 257×738×427
Machine weight kg 8 7.5
Gross weight kg 12 11
3 for power supply (including earth wiring), 2 for interunit wiring (outdoor unit-BP, BP-BP),
Number of wiring connections
4 for interunit wiring (BP-indoor unit)
Liquid mm Main : φ9.5×1 / Branch : φ6.4×3 Main : φ9.5×1 / Branch : φ6.4×2
Piping
connection Gas mm Main : φ19.1×1 / Branch : φ15.9×3 Main : φ19.1×1 / Branch : φ15.9×2
(Brazing)
Drain mm Drain processingless
Heat insulation Both liquid and gas pipes
Max. combination kW 20.8 14.2
Min. combination kW 2.5
Installation manual pc. 1
Liquid 1 (For I.D. φ6.4)
For
Gas 1 (For I.D. φ12.7)
main
L shape
Gas pc. 1 (For I.D. φ15.9, 19.1)
reducer
For Liquid 1 (For I.D. φ9.5)
Accessories branch Gas 3 (For I.D. φ12.7, 9.5) 2 (For I.D. φ12.7, 9.5)
Hanger metal pc. 4
Screws pc. 8 (M4×8)
Heat insulation (2 pcs. is 1 set) 4 Set 3 Set
Binding band pc. 2
Drawing No. C: 4D050057B
Notes:
Conversion formulae
1. The piping connection must be cut so as to suit the piping sizes of the indoor unit which will be connected.
The same sizes should be used for the piping on the outdoor unit. kcal/h=kW×860
Btu/h=kW×3414
2. ( )* : including auxiliary piping length cfm=m³/min×35.3
3. Refer to Electric Characteristics for the power input.
466 BP Units
2.1
Unit: mm
BP Units
(Characteristic 3. ) Manufacturer's 4-Suspension
Branch piping label bolt(M8~M10) Standard accessories (Caution5. )
BPMKS967A3
EDMT341410C
25
68 For indoor side(Gas) For outdoor side(Gas)
163 110
258 Dimple
O.D.φ15.9 65 O.D.φ19. 1
BP Units
90
110
70
254
165
(304)
125
155
2. Dimensions
Installation restrictions
(180)
(servicing space) (installation and service space) (servicing space)
Min460 Min390
23 73.5
23 73.5
3-I.Dφ.6.4CuT Terminal 2-Brazing
197 107
RoomA
RoomB
RoomC
Earth(M4) (For Power supply) Earth(M4) I.D.φ9.5CuT
178 294 178
INDOOR UNIT SIDE (650) OUTDOOR UNIT SIDE
Characteristics:
1. No drain treatment necessary.
2. This unit can be installed so that or side
faces forward. (It choosed by servicing direction).
3. The piping for the indoor unit and outdoor unit can be.
freely installed to directions of , , or . Wall-mounting
4. This unit can be installed with either suspending (Characteristic 4. ) Screw for temporary fixing
from the ceiling or mounting on wall. 323~355 (Cautions 3.)
The opening for Inspection
25
Cautions:
Servicing is needed
1. This unit must be installed so that side of is facing up. opening of 650mm square
Min300
2. The slant of face must be within ±5° for service and maintenance.
113
for front and rear, right and left.
(servicing space)
3D048411A
467
Dimensions
20
468
Unit: mm
Dimensions
BPMKS967A2
25
68 For indoor side(Gas) For outdoor side(Gas)
163 110
Dimple
O.D.φ15.9 65 O.D.φ19.1
90
110
70
254
165
125
(304)
155
I.D.φ9.5 I.D.φ19.1 45 Cut line for
322 Cut line for I.D.φ15.9
Suspension bolt pitch Cut line for I.D.φ12.7 For indoor side(Liquid)
Suspension bolt pitch Cut line for O.D.φ6.4
Terminal(For A room) Wiring clamp For outdoor unit side(Gas) 150
2×2-Brazing Terminal(For B room) For outdoor unit side(Liquid)
(304) 45 Wiring clamp Electric box O.D.φ15.9 90 I.D.φ12.7
Terminal(For transmission) O.D.φ9.5 100 I.D.φ6.4
57 95
2-I.D.φ15.9CuT I.D.φ19.1CuT I.D.φ9.5
Installation restrictions
(180)
(servicing space) (installation and service space) (servicing space)
Min390 Min390
23 73.5
23 73.5
2-I.D.φ6.4CuT 2-Brazing
Terminal 197 107
Earth(M4) (For Power supply) Earth(M4) I.D.φ9.5CuT
RoomA
RoomB
178 294 178
INDOOR UNIT SIDE (650) OUTDOOR UNIT SIDE
Characteristics:
1. No drain treatment necessary.
2. This unit can be installed so that or side
faces forward. (It is chosen by servicing direction).
3. The piping for the indoor unit and outdoor unit can be.
freely installed to directions of , , or . Wall-mounting
4. This unit can be installed with either suspending Screw for temporary fixing
from the ceiling or mounting on wall. (Characteristic 4. )
323~355 (Cautions 3.)
The opening for Inspection
25
Cautions:
1. This unit must be installed so that side of is facing up. Servicing is needed
opening of 650mm square
Min300
BP Units
EDMT341410C Piping Diagrams
3. Piping Diagrams
3.1 BP Units
BPMKS967A3
INDOOR UNIT
GAS SIDE
THERMISTOR(DGA) ROOM A
(15.9CuT)
LOCAL PIPING
GAS SIDE
REFRIGERANT FLOW THERMISTOR(DGB) ROOM B
(15.9CuT) GAS
HEATING
LOCAL PIPING
COOLING GAS SIDE
THERMISTOR(DGC) ROOM C
(15.9CuT)
LOCAL PIPING
ELECTRONIC
EXPANSION VALVE(BYPASS)
FILTER EVH ELECTRONIC INDOOR UNIT
EXPANSION VALVE(ROOM A)
LIQUID SIDE
EVA FILTER THERMISTOR(DLA) ROOM A
(6.4CuT)
LOCAL PIPING
ELECTRONIC
EXPANSION VALVE(ROOM B)
LIQUID SIDE
EVB FILTER THERMISTOR(DLB) ROOM B
(6.4CuT)
OUTDOOR UNIT LIQUID
(19.1CuT) LOCAL PIPING
ELECTRONIC
LOCAL PIPING EXPANSION VALVE(ROOM C)
LIQUID SIDE
EVC FILTER THERMISTOR(DLC) ROOM C
(6.4CuT)
LOCAL PIPING
3D048285A
BPMKS967A2
INDOOR UNIT
GAS SIDE ROOM A
REFRIGERANT FLOW THERMISTOR(DGA) (15.9CuT)
HEATING LOCAL PIPING
COOLING GAS SIDE GAS
THERMISTOR(DGB) ROOM B
(15.9CuT)
LOCAL PIPING
ELECTRONIC
EXPANSION VALVE(BYPASS)
FILTER ELECTRONIC INDOOR UNIT
EVH EXPANSION VALVE(ROOM A)
LIQUID SIDE
EVA FILTER THERMISTOR(DLA) ROOM A
(6.4CuT) 20
LOCAL PIPING
ELECTRONIC
EXPANSION VALVE(ROOM B) LIQUID
LIQUID SIDE
EVB FILTER THERMISTOR(DLB) ROOM B
(6.4CuT)
OUTDOOR UNIT
(19.1CuT) LOCAL PIPING
LOCAL PIPING
LOCAL PIPING
3D048286B
BP Units 469
Wiring Diagrams EDMT341410C
4. Wiring Diagrams
4.1 BP Units
BPMKS967A3
3D048288
BPMKS967A2
3D048438
470 BP Units
EDMT341410C Electric Characteristics
5. Electric Characteristics
Units Power supply IFM Input (W)
Model Hz Volts Voltage range MCA MFA kW FLA Cooling
BPMKS967A3 Max. 264 V
50 Hz 220-240 V 0.05 15 — — 10
BPMKS967A2 Min. 198 V
BPMKS967A3 Max. 253 V
60 Hz 220-230 V Min. 198 V 0.05 15 — — 10
BPMKS967A2
6. Accessories
6.1 Optional Accessories
20
BP Units 471
Centre of Gravity EDMT341410C
7. Centre of Gravity
BPMKS967A3
Unit: mm
3D048409A
BPMKS967A2
Unit: mm
3D048410A
472 BP Units
EDMT341410C Installation
8. Installation
20
C: 3P155399-1E
BP Units 473
Installation EDMT341410C
Installation
• This unit may be installed suspended from the ceiling or mounted on the wall.
• This unit may only be installed, as shown in the diagram below. (The side should be facing upwards.)
However, it may be freely installed in any direction forward or back, and to the sides.
• Be sure to leave a 650mm square opening for service and inspection as shown in the diagram below, for both ceiling-
suspended installation and wall-mounted installation.
• This unit “does not require drain treatment”.
• This unit may be installed with sides or facing forward (servicing direction).
• The piping for the indoor unit may be freely led around in directions , , or .
• The inclination of side must be within ±5°C degrees forward or back or to the sides.
For 2 rooms
(product dimensions and attachment bolt pitch) Wall-mounted
113 (25)
Indoor unit side
piping Manufacturer’s label 4-Suspension bolt
25
(M8-M10)
(304)
254
322
Suspension bolt pitch Suspension bolt pitch
Terminal (For A room)
2×2-Brazing Wiring clamp Terminal (For B room) Wiring clamp
(304) 45 Electric box
57 95 Terminal (For transmission) (Top surface)
2-I.D. φ15.9 CuT
I.D. φ19.1 CuT
(180)
73.5
73.5
23
23
Room B
Earth (M4) (For Power supply) Earth (M4) I.D. φ9.5 CuT 197 107
178 294 178
(650)
INDOOR UNIT SIDE OUTDOOR UNIT SIDE
110
70
165
125
155
English 5
3P155399-1E
474 BP Units
EDMT341410C Installation
Installation
For 3 rooms
(product dimensions and attachment bolt pitch) Wall-mounted
113 (25)
Indoor unit side
piping Manufacturer’s label 4-Suspension bolt
25
(M8-M10)
(304)
254
322
Suspension bolt pitch Suspension bolt pitch
Terminal (For A room)
2×3-Brazing Wiring clamp Terminal (For B room) Wiring clamp
(304) 45
Terminal (For C room) Electric box
57 95 95 57 Terminal (For transmission) (Top surface)
3-I.D. φ15.9 CuT
I.D. φ19.1 CuT
(180)
73.5
73.5
23
23
Room B
Earth (M4) (For Power supply) Earth (M4) I.D. φ9.5 CuT 197 107
178 294 178
(650)
INDOOR UNIT SIDE OUTDOOR UNIT SIDE
110
70
165
125
155
6 English
3P155399-1E
BP Units 475
Installation EDMT341410C
Caution
• Before doing any wiring on site, replace the electric box.
Electrical equipment
cover
Screw (M4×12L)
2) Remove 4 screws shown in the figure on the below, remove Remove 4 screws. (M4×8L)
the printed circuit board.
4
4
4
P
(A)
(A)
(B)
Binding band
English 7
3P155399-1E
476 BP Units
EDMT341410C Installation
Insert the
tabs fully.
2. Ceiling-suspended type
Screws 8
Hanger metal 7
Procedure:
1) Fix the furnished hanger metal 7 with two screws 8 .
(4 locations in total)
2) Using an insert-hole-in-anchor, hang the hanging bolt.
3) Install a hexagon nut and a flat washer (field supply) to
the hanging bolt as shown in the figure in the below,
and lift the unit to hang on the hanger metal. Ceiling side
4) After checking with a level that the unit is level, tighten
the hexagon nut.
* The tilt of the unit should be within ±5° in front/ back
and left/right.
Hanging bolt (M10 or M8)
Six-sided nut (M10 or M8)
15~20
Flat washer
Nut
Flat washer
Hanger metal 7
Hanging bolt BP unit
CAUTION
• Be sure to install the unit with the top surface up. Temporary screw: 20
Screw in temporarily after
• Do not install near bedrooms. The sound of refrigerant opening a slight gap with
flowing through the piping may sometimes be audible. the wall.
Temporary screws:
attach and then hang the Screws (M5)
unit on them. (2 screws) (field supply)
8 English
3P155399-1E
BP Units 477
Installation EDMT341410C
Heat
insulation 10
3) Wrap the pipes to be brazed with sufficient wet cloths so that brazing
does not affect the unit.
Wet cloth
4) After brazing, use wet cloths or spray mist to sufficiently cool off all
pipes.
brazing
5) When brazing, be careful that the flame of the torch does not come in
contact with the unit.
(Since the inside of the unit is made of plastic, it may become
deformed or melt, destroying its heat-insulation performance.)
Wet cloth
2. Insulation of pipes
1) Attach heat insulation to each pipe. One-sided adhesive tape
(field supply)
2) When attaching insulation to the pipes, use one-sided adhesive tape or
similar materials to thoroughly prevent air from entering the heat
Heat insulation
insulation. (field supply)
3) Eliminate any gaps in the heat insulation.
Heat insulation 10
3. Unconnected pipes
Wet cloth
1) For pipes not yet connected to a room, pinch the end of the pipe and
braze them. brazing
2) When brazing this area too, wrap the pipes with sufficient wet cloths to
protect the unit.
3) After brazing this area too, cool the pipes sufficiently.
Wet cloth
brazing
4) Attach heat insulation, and use one-sided adhesive tape to thoroughly
prevent air from entering the heat insulation.
One-sided adhesive tape
5) Cover the ends of the pipes with sufficient heat insulation. (field supply)
Heat insulation
(field supply)
English 9
3P155399-1E
478 BP Units
EDMT341410C Installation
125
Pipe joint 6
Brazing Piping
Piping Piping Pipe joint 3 (field supply)
(field supply) Brazing (field supply)
I.D φ9.5 I.D φ12.7
When straight. When the direction is changed.
I.D φ15.9 I.D φ12.7
Brazing Brazing
Connection for φ15.9 piping. Connection for φ12.7 piping.
When straight.
Indoor unit side (Liquid)
45
Pipe joint 5
Cut line Pipe joint 2 Cut line for
Brazing
for O.D φ6.4 I.D φ15.9
Piping
Piping (field supply)
I.D φ9.5 Piping
(field supply) (field supply) I.D φ19.1
Pipe joint 3
Connecting φ9.5 I.D φ12.7
45
Brazing Brazing
interunit piping
Cut line for
I.D φ15.9
Outdoor unit side (Liquid) Connection for φ19.1 and φ15.9 piping. Connection for φ12.7 piping.
Pipe joint 4
When the direction is changed. 20
Piping
(field supply)
Brazing
I.D φ6.4 NOTE
When changing the direction of the piping to
Connecting φ6.4
something other than the above, bend the
interunit piping
piping on site.
10 English
3P155399-1E
BP Units 479
Installation EDMT341410C
C: 3P155399-1E
480 BP Units
EDMT341410C Installation
NOTE: The terminal block numbers are arranged from top to bottom in order of 1, 2 and 3.
Peel the outer coating leaving Binding band 9
10mm from the wire clamp. Example Secure the wires with binding band 9 to Warning
prevent them from coming out if pulled Do not use tapped
10mm 〈For 3 rooms〉 on from the outside.
wires,stand wires,
extensioncords, or
starbust connections,
Wire as they may cause
clamp overtheating, electrical
shock, or fire.
1
2 Room A Transmission wire (To other BP unit: F1, F2)
4
3
Transmission wire (To other BP unit: F1, F2 or to
1 outdoor unit: F1, F2) sheathed two-core cables
F2
2 Room B
4
4
For other BP unit (To L1, N1)
1 N2
P
2 Room C L2 CAUTION
4
3 N1 Mistakenly connecting the power
L1
supply to this terminal block could
cause control operating malfunctions.
(*) Only in protected pipes, use H07RN-F when protected pipes are not use.
Specifications for local wiring power cord and branch wiring are in compliance with IEC60245.
CAUTION
• All local interunit wiring must be secured using the wire
binding band over the insulation, as shown in the figure. Insulation
12 English
3P155399-1E
BP Units 481
Installation EDMT341410C
+300mm
of slack
+300mm
of slack
5) Return the electrical equipment cover to its original position, and fix it with the
screws.
Screw
(M4×12L)
Install the electrical
equipment cover.
Operating Test
Follow the “Operating test” as described in the installation manual of the outdoor unit.
If the BP unit does not operate normally during the test run, the error can be checked on the remote controller display for the indoor
unit.
The BP Unit
Simple diagnosis can be done using the LEDs on the BP unit’s circuit board.
For details, see the label on the inside of the BP unit’s electrical equipment cover.
English 13
3P155399-1E
482 BP Units
EDMT341410C
Part 6
Outdoor Units
RXQ-TAH
Cooling Only 50 Hz High-COP Type . . . . . . . . . . 485
RXQ-TA(N)
Cooling Only 50 Hz Standard Type . . . . . . . . . . . 557
RXQ-TA(S)
Cooling Only 50 Hz Space Saving Type . . . . . . . 675
RXQ-TAH
Cooling Only 50 Hz High-COP Type
1. Specifications ......................................................................................486
1.1 Cooling Only 50 Hz High-COP Type (RXQ-TAH) ................................486
2. Dimensions .........................................................................................496
2.1 Combination Unit..................................................................................496
3. Service Space .....................................................................................501
4. Field Wiring .........................................................................................502
5. Electric Characteristics........................................................................504
6. Capacity Tables (High-COP Type)......................................................506
6.1 Cooling Capacity Tables for VRV Indoor Units Only (Te: Auto) ...........506
6.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC).............526
6.3 Capacity Correction Factor...................................................................546
7. Operation Limits ..................................................................................554
8. Accessories.........................................................................................555
8.1 Optional Accessories............................................................................555
21
RXQ-TAH 485
Specifications EDMT341410C
1. Specifications
1.1 Cooling Only 50 Hz High-COP Type (RXQ-TAH)
Model Name (Combination Unit) RXQ12TAHYM(E) RXQ14TAHYM(E)
Model Name (Independent Unit) RXQ6TAYM(E)+RXQ6TAYM(E) RXQ6TAYM(E)+RXQ8TAYM(E)
Power Supply 3 phase, 380-415/380 V, 50/60 Hz 3 phase, 380-415/380 V, 50/60 Hz
kcal/h 27,500 33,000
1 Cooling Capacity Btu/h 109,000 131,000
kW 32.0 38.4
Casing Color Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm (1,657×930×765)+(1,657×930×765) (1,657×930×765)+(1,657×930×765)
Heat Exchanger Cross fin coil Cross fin coil
Type Hermetically sealed scroll type Hermetically sealed scroll type
Motor Output×
Compressor kW (2.4×1)+(2.4×1) (2.4×1)+(3.4×1)
Number of Units
Starting Method Soft start Soft start
Type Propeller fan Propeller fan
Motor Output kW (0.5×1)+(0.5×1) (0.5×1)+(0.5×1)
Fan
Airflow Rate m³/min 119+119 119+157
Drive Direct drive Direct drive
Connecting Liquid Pipe mm φ12.7 C1220T (Brazing connection) φ12.7 C1220T (Brazing connection)
Pipes Gas Pipe mm φ28.6 C1220T (Brazing connection) φ28.6 C1220T (Brazing connection)
Mass kg 185+185 185+185
2 Sound pressure level dB(A) 58 59
High pressure switch, Fan driver overload protector, High pressure switch, Fan driver overload protector,
Safety Devices
Over current relay, Inverter overload protector Over current relay, Inverter overload protector
Capacity Control % 10-100 10-100
Refrigerant Name R410A R410A
Refrigerant Charge kg 5.9+5.9 5.9+5.9
Control Electronic expansion valve Electronic expansion valve
Refrigerator Oil Refer to the nameplate of compressor Refer to the nameplate of compressor
Installation manual, Operation manual, Connection pipes, Installation manual, Operation manual, Connection pipes,
Standard Accessories
Clamps Clamps
Specifications — —
Drawing No.
Sound level — —
486 RXQ-TAH
EDMT341410C Specifications
21
RXQ-TAH 487
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
488 RXQ-TAH
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
21
RXQ-TAH 489
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
490 RXQ-TAH
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
21
RXQ-TAH 491
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
492 RXQ-TAH
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
21
RXQ-TAH 493
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
494 RXQ-TAH
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
21
RXQ-TAH 495
Dimensions EDMT341410C
2. Dimensions
2.1 Combination Unit
3D084457D
Unit: mm
496 RXQ-TAH
EDMT341410C Dimensions
3D084529D
Unit: mm
21
RXQ-TAH 497
Dimensions EDMT341410C
RXQ34TAHYM / RXQ38TAHYM
3D084528C
Unit: mm
498 RXQ-TAH
EDMT341410C Dimensions
RXQ36TAHYM / RXQ40TAHYM
3D084464C
Unit: mm
21
RXQ-TAH 499
Dimensions EDMT341410C
3D084465C
Unit: mm
500 RXQ-TAH
EDMT341410C Service Space
3. Service Space
RXQ12TAHYM / RXQ14TAHYM / RXQ16TAHYM / RXQ18TAHYM / RXQ20TAHYM / RXQ22TAHYM /
RXQ24TAHYM / RXQ26TAHYM / RXQ28TAHYM / RXQ30TAHYM / RXQ32TAHYM / RXQ34TAHYM /
RXQ36TAHYM / RXQ38TAHYM / RXQ40TAHYM / RXQ42TAHYM / RXQ44TAHYM / RXQ46TAHYM /
RXQ48TAHYM / RXQ50TAHYM
Unit: mm
3D084449B
21
RXQ-TAH 501
Field Wiring EDMT341410C
4. Field Wiring
RXQ12TAHYM / RXQ14TAHYM / RXQ16TAHYM
3D084407D
502 RXQ-TAH
EDMT341410C Field Wiring
3D084410D
21
RXQ-TAH 503
Electric Characteristics EDMT341410C
5. Electric Characteristics
RXQ12TAHYM / RXQ14TAHYM / RXQ16TAHYM / RXQ18TAHYM / RXQ20TAHYM / RXQ22TAHYM /
RXQ24TAHYM / RXQ26TAHYM / RXQ28TAHYM / RXQ30TAHYM
3D105344
504 RXQ-TAH
EDMT341410C Electric Characteristics
3D105345
21
RXQ-TAH 505
Capacity Tables (High-COP Type) EDMT341410C
506 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 507
Capacity Tables (High-COP Type) EDMT341410C
508 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 509
Capacity Tables (High-COP Type) EDMT341410C
510 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 511
Capacity Tables (High-COP Type) EDMT341410C
512 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 513
Capacity Tables (High-COP Type) EDMT341410C
514 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 515
Capacity Tables (High-COP Type) EDMT341410C
516 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 517
Capacity Tables (High-COP Type) EDMT341410C
518 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 519
Capacity Tables (High-COP Type) EDMT341410C
520 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 521
Capacity Tables (High-COP Type) EDMT341410C
522 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 523
Capacity Tables (High-COP Type) EDMT341410C
524 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 525
Capacity Tables (High-COP Type) EDMT341410C
6.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC)
526 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 527
Capacity Tables (High-COP Type) EDMT341410C
528 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 529
Capacity Tables (High-COP Type) EDMT341410C
530 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 531
Capacity Tables (High-COP Type) EDMT341410C
532 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 533
Capacity Tables (High-COP Type) EDMT341410C
534 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 535
Capacity Tables (High-COP Type) EDMT341410C
536 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 537
Capacity Tables (High-COP Type) EDMT341410C
538 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 539
Capacity Tables (High-COP Type) EDMT341410C
540 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 541
Capacity Tables (High-COP Type) EDMT341410C
542 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 543
Capacity Tables (High-COP Type) EDMT341410C
544 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ-TAH 545
Capacity Tables (High-COP Type) EDMT341410C
3D085303B
546 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ16TAHYM
3D085305B
21
RXQ-TAH 547
Capacity Tables (High-COP Type) EDMT341410C
3D085308B
548 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
3D085311B
21
RXQ-TAH 549
Capacity Tables (High-COP Type) EDMT341410C
RXQ22TAHYM
3D085310B
550 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ46TAHYM
3D085313B
21
RXQ-TAH 551
Capacity Tables (High-COP Type) EDMT341410C
RXQ48TAHYM
3D085314B
552 RXQ-TAH
EDMT341410C Capacity Tables (High-COP Type)
RXQ50TAHYM
3D085318B
21
RXQ-TAH 553
Operation Limits EDMT341410C
7. Operation Limits
RXQ12TAHYM / RXQ14TAHYM / RXQ16TAHYM / RXQ18TAHYM / RXQ20TAHYM / RXQ22TAHYM /
RXQ24TAHYM / RXQ26TAHYM / RXQ28TAHYM / RXQ30TAHYM / RXQ32TAHYM / RXQ34TAHYM /
RXQ36TAHYM / RXQ38TAHYM / RXQ40TAHYM / RXQ42TAHYM / RXQ44TAHYM / RXQ46TAHYM /
RXQ48TAHYM / RXQ50TAHYM
3D084453B
554 RXQ-TAH
EDMT341410C Accessories
8. Accessories
8.1 Optional Accessories
RXQ12TAHYM(E)
Optional accessories RXQ14TAHYM(E)
RXQ16TAHYM(E)
KHRP26M22H, KHRP26M33H, KHRP26M72H
Distributive REFNET header
(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
Piping
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T
Outdoor unit multi connection piping kit BHFP22P100
3D085294G
RXQ24TAHYM(E)
RXQ18TAHYM(E) RXQ26TAHYM(E)
Optional accessories RXQ20TAHYM(E) RXQ28TAHYM(E) RXQ34TAHYM(E)
RXQ22TAHYM(E) RXQ30TAHYM(E)
RXQ32TAHYM(E)
KHRP26M22H
(Max. 4 branch),
REFNET header KHRP26M33H KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H
Distributive (Max. 8 branch), (Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
Piping KHRP26M72H
(Max. 8 branch)
KHRP26A22T,
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
KHRP26A33T, KHRP26A72T
Pipe size reducer — KHRP26M73TP, KHRP26M73HP
Outdoor unit multi connection piping kit BHFP22P151
3D085294G
RXQ42TAHYM(E)
RXQ44TAHYM(E)
Optional accessories RXQ36TAHYM(E) RXQ38TAHYM(E) RXQ40TAHYM(E) RXQ46TAHYM(E)
RXQ48TAHYM(E)
RXQ50TAHYM(E)
21
RXQ-TAH 555
Accessories EDMT341410C
556 RXQ-TAH
EDMT341410C
RXQ-TA(N)
Cooling Only 50 Hz Standard Type
1. Specifications ......................................................................................558
1.1 Cooling Only 50 Hz Standard Type (RXQ-TA(N))................................558
2. Dimensions .........................................................................................572
2.1 Independent Unit ..................................................................................572
2.2 Combination Unit..................................................................................574
3. Service Space .....................................................................................581
4. Piping Diagrams..................................................................................582
5. Wiring Diagrams..................................................................................584
6. Field Wiring .........................................................................................587
7. Electric Characteristics........................................................................590
8. Safety Devices Setting ........................................................................593
9. Capacity Tables (Standard Type) .......................................................594
9.1 Cooling Capacity Tables for VRV Indoor Units Only (Te: Auto) ...........594
9.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC).............622
9.3 Cooling Capacity Tables for Residential Indoor Units Only..................650
9.4 Capacity Correction Factor...................................................................656
10.Operation Limits ..................................................................................670
11.Sound Levels ......................................................................................671
12.Accessories.........................................................................................674
12.1 Optional Accessories............................................................................674
22
RXQ-TA(N) 557
Specifications EDMT341410C
1. Specifications
1.1 Cooling Only 50 Hz Standard Type (RXQ-TA(N))
Model Name RXQ6TAYM(E) RXQ8TAYM(E)
Power Supply 3 phase, 380-415/380 V, 50/60 Hz 3 phase, 380-415/380 V, 50/60 Hz
kcal/h 13,800 19,300
1 Cooling Capacity Btu/h 54,600 76,400
kW 16.0 22.4
Casing Color Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm 1,657×930×765 1,657×930×765
Heat Exchanger Cross fin coil Cross fin coil
Type Hermetically sealed scroll type Hermetically sealed scroll type
Motor Output×
Compressor kW 2.4×1 3.4×1
Number of Units
Starting Method Soft start Soft start
Type Propeller fan Propeller fan
Motor Output kW 0.5×1 0.5×1
Fan
Airflow Rate m³/min 119 157
Drive Direct drive Direct drive
Connecting Liquid Pipe mm φ9.5 C1220T (Brazing connection) φ9.5 C1220T (Brazing connection)
Pipes Gas Pipe mm φ19.1 C1220T (Brazing connection) φ19.1 C1220T (Brazing connection)
Mass kg 185 185
2 Sound pressure level dB(A) 55 56
High pressure switch, Fan driver overload protector, High pressure switch, Fan driver overload protector,
Safety Devices
Over current relay, Inverter overload protector Over current relay, Inverter overload protector
Capacity Control % 20-100 20-100
Refrigerant Name R410A R410A
Refrigerant Charge kg 5.9 5.9
Control Electronic expansion valve Electronic expansion valve
Refrigerator Oil Refer to the nameplate of compressor Refer to the nameplate of compressor
Installation manual, Operation manual, Connection pipes, Installation manual, Operation manual, Connection pipes,
Standard Accessories
Clamps Clamps
Specifications C: 3D103579B C: 3D103579B
Drawing No.
Sound level C: 4D103808 C: 4D103809
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
558 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 559
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
560 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 561
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
562 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 563
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
564 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 565
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
566 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 567
Specifications EDMT341410C
568 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 569
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
570 RXQ-TA(N)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
22
RXQ-TA(N) 571
Dimensions EDMT341410C
2. Dimensions
2.1 Independent Unit
3D084511E
572 RXQ-TA(N)
EDMT341410C Dimensions
RXQ14TAYM / RXQ16TAYM
Unit: mm
3D084507E
22
RXQ-TA(N) 573
Dimensions EDMT341410C
RXQ18TANYM / RXQ20TANYM
3D084457D
Unit: mm
574 RXQ-TA(N)
EDMT341410C Dimensions
3D084458C
Unit: mm
22
RXQ-TA(N) 575
Dimensions EDMT341410C
3D084462C
Unit: mm
576 RXQ-TA(N)
EDMT341410C Dimensions
RXQ34TANYM / RXQ36TANYM
3D084529D
Unit: mm
22
RXQ-TA(N) 577
Dimensions EDMT341410C
RXQ38TANYM / RXQ40TANYM
3D084528C
Unit: mm
578 RXQ-TA(N)
EDMT341410C Dimensions
RXQ42TANYM / RXQ44TANYM
3D084464C
Unit: mm
22
RXQ-TA(N) 579
Dimensions EDMT341410C
3D084465C
Unit: mm
580 RXQ-TA(N)
EDMT341410C Service Space
3. Service Space
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM / RXQ14TAYM / RXQ16TAYM / RXQ18TANYM /
RXQ20TANYM / RXQ22TANYM / RXQ24TANYM / RXQ26TANYM / RXQ28TANYM / RXQ30TANYM /
RXQ32TANYM / RXQ34TANYM / RXQ36TANYM / RXQ38TANYM / RXQ40TANYM / RXQ42TANYM /
RXQ44TANYM / RXQ46TANYM / RXQ48TANYM / RXQ50TANYM / RXQ52TANYM / RXQ54TANYM /
RXQ56TANYM / RXQ58TANYM / RXQ60TANYM
Unit: mm
3D084449B
22
RXQ-TA(N) 581
Piping Diagrams EDMT341410C
4. Piping Diagrams
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM
3D081783A
582 RXQ-TA(N)
EDMT341410C Piping Diagrams
RXQ14TAYM / RXQ16TAYM
3D081792A
22
RXQ-TA(N) 583
Wiring Diagrams EDMT341410C
5. Wiring Diagrams
RXQ6TAYM / RXQ8TAYM
3D103870
584 RXQ-TA(N)
EDMT341410C Wiring Diagrams
RXQ10TAYM / RXQ12TAYM
22
3D103873A
RXQ-TA(N) 585
Wiring Diagrams EDMT341410C
RXQ14TAYM / RXQ16TAYM
2D103875
586 RXQ-TA(N)
EDMT341410C Field Wiring
6. Field Wiring
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM / RXQ14TAYM / RXQ16TAYM
3D084395D
22
RXQ-TA(N) 587
Field Wiring EDMT341410C
3D084407D
588 RXQ-TA(N)
EDMT341410C Field Wiring
3D084410D
22
RXQ-TA(N) 589
Electric Characteristics EDMT341410C
7. Electric Characteristics
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM / RXQ14TAYM / RXQ16TAYM / RXQ18TANYM /
RXQ20TANYM / RXQ22TANYM
3D105337
590 RXQ-TA(N)
EDMT341410C Electric Characteristics
3D105340
22
RXQ-TA(N) 591
Electric Characteristics EDMT341410C
3D105341
592 RXQ-TA(N)
EDMT341410C Safety Devices Setting
22
RXQ-TA(N) 593
Capacity Tables (Standard Type) EDMT341410C
594 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 595
Capacity Tables (Standard Type) EDMT341410C
596 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 597
Capacity Tables (Standard Type) EDMT341410C
598 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 599
Capacity Tables (Standard Type) EDMT341410C
600 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 601
Capacity Tables (Standard Type) EDMT341410C
602 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 603
Capacity Tables (Standard Type) EDMT341410C
604 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 605
Capacity Tables (Standard Type) EDMT341410C
606 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 607
Capacity Tables (Standard Type) EDMT341410C
608 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 609
Capacity Tables (Standard Type) EDMT341410C
610 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 611
Capacity Tables (Standard Type) EDMT341410C
612 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 613
Capacity Tables (Standard Type) EDMT341410C
614 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 615
Capacity Tables (Standard Type) EDMT341410C
616 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 617
Capacity Tables (Standard Type) EDMT341410C
618 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 619
Capacity Tables (Standard Type) EDMT341410C
620 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 621
Capacity Tables (Standard Type) EDMT341410C
9.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC)
622 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 623
Capacity Tables (Standard Type) EDMT341410C
624 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 625
Capacity Tables (Standard Type) EDMT341410C
626 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 627
Capacity Tables (Standard Type) EDMT341410C
628 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 629
Capacity Tables (Standard Type) EDMT341410C
630 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 631
Capacity Tables (Standard Type) EDMT341410C
632 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 633
Capacity Tables (Standard Type) EDMT341410C
634 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 635
Capacity Tables (Standard Type) EDMT341410C
636 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 637
Capacity Tables (Standard Type) EDMT341410C
638 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 639
Capacity Tables (Standard Type) EDMT341410C
640 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 641
Capacity Tables (Standard Type) EDMT341410C
642 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 643
Capacity Tables (Standard Type) EDMT341410C
644 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 645
Capacity Tables (Standard Type) EDMT341410C
646 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 647
Capacity Tables (Standard Type) EDMT341410C
648 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 649
Capacity Tables (Standard Type) EDMT341410C
650 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 651
Capacity Tables (Standard Type) EDMT341410C
652 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 653
Capacity Tables (Standard Type) EDMT341410C
654 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ-TA(N) 655
Capacity Tables (Standard Type) EDMT341410C
RXQ6TAYM / RXQ8TAYM
3D085299D
656 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ10TAYM
3D085302D
22
RXQ-TA(N) 657
Capacity Tables (Standard Type) EDMT341410C
3D085303B
658 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ16TAYM
3D085305B
22
RXQ-TA(N) 659
Capacity Tables (Standard Type) EDMT341410C
3D085308B
660 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
3D085311B
22
RXQ-TA(N) 661
Capacity Tables (Standard Type) EDMT341410C
RXQ22TANYM
3D085310B
662 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ46TANYM
3D085313B
22
RXQ-TA(N) 663
Capacity Tables (Standard Type) EDMT341410C
RXQ48TANYM
3D085314B
664 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ50TANYM
3D085318B
22
RXQ-TA(N) 665
Capacity Tables (Standard Type) EDMT341410C
RXQ52TANYM
3D085320B
666 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ54TANYM
3D085322B
22
RXQ-TA(N) 667
Capacity Tables (Standard Type) EDMT341410C
RXQ56TANYM / RXQ58TANYM
3D086203A
668 RXQ-TA(N)
EDMT341410C Capacity Tables (Standard Type)
RXQ60TANYM
3D086205A
22
RXQ-TA(N) 669
Operation Limits EDMT341410C
3D084453B
670 RXQ-TA(N)
EDMT341410C Sound Levels
4D103808
RXQ8TAYM
4D103809
22
RXQ-TA(N) 671
Sound Levels EDMT341410C
RXQ10TAYM
4D103810
RXQ12TAYM
4D103811
672 RXQ-TA(N)
EDMT341410C Sound Levels
RXQ14TAYM
4D103814
RXQ16TAYM
4D103817
22
RXQ-TA(N) 673
Accessories EDMT341410C
12. Accessories
12.1 Optional Accessories
RXQ6TAYM(E)
Optional accessories RXQ14TAYM(E)
RXQ8TAYM(E) RXQ12TAYM(E)
RXQ10TAYM(E) RXQ16TAYM(E)
KHRP26M22H
(Max. 4 branch), KHRP26M22H, KHRP26M33H, KHRP26M72H
REFNET header
Distributive KHRP26M33H (Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
Piping (Max. 8 branch)
KHRP26A22T,
REFNET joint KHRP26A33T KHRP26A22T, KHRP26A33T, KHRP26A72T
3D085273G
RXQ28TANYM(E)
Optional accessories RXQ18TANYM(E) RXQ24TANYM(E)
RXQ22TANYM(E) RXQ30TANYM(E)
RXQ20TANYM(E) RXQ26TANYM(E)
RXQ32TANYM(E)
KHRP26M22H, KHRP26M33H, KHRP26M22H, KHRP26M33H,
(Max. 4 branch) (Max. 8 branch) (Max. 4 branch) (Max. 8 branch)
REFNET header KHRP26M72H, KHRP26M73H
Distributive KHRP26M72H
Piping (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T,
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T KHRP26A72T, KHRP26A73T
Pipe size reducer — KHRP26M73TP, KHRP26M73HP
Outdoor unit multi connection piping kit BHFP22P100
3D085273G
RXQ46TANYM(E)
RXQ48TANYM(E)
RXQ50TANYM(E)
Optional accessories RXQ34TANYM(E) RXQ38TANYM(E) RXQ42TANYM(E) RXQ52TANYM(E)
RXQ36TANYM(E) RXQ40TANYM(E) RXQ44TANYM(E) RXQ54TANYM(E)
RXQ56TANYM(E)
RXQ58TANYM(E)
RXQ60TANYM(E)
674 RXQ-TA(N)
EDMT341410C
RXQ-TA(S)
Cooling Only 50 Hz Space Saving Type
1. Specifications ......................................................................................676
1.1 Cooling Only 50 Hz Space Saving Type (RXQ-TA(S)) ........................676
2. Dimensions .........................................................................................685
2.1 Independent Unit ..................................................................................685
2.2 Combination Unit..................................................................................686
3. Service Space .....................................................................................691
4. Piping Diagrams..................................................................................692
5. Wiring Diagrams..................................................................................693
6. Field Wiring .........................................................................................695
7. Electric Characteristics........................................................................698
8. Safety Devices Setting ........................................................................700
9. Capacity Tables (Space Saving Type)................................................701
9.1 Cooling Capacity Tables for VRV Indoor Units Only (Te: Auto) ...........701
9.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC).............718
9.3 Cooling Capacity Tables for Residential Indoor Units Only..................735
9.4 Capacity Correction Factor...................................................................737
10.Operation Limits ..................................................................................744
11.Sound Levels ......................................................................................745
12.Accessories.........................................................................................746
12.1 Optional Accessories............................................................................746
23
RXQ-TA(S) 675
Specifications EDMT341410C
1. Specifications
1.1 Cooling Only 50 Hz Space Saving Type (RXQ-TA(S))
Model Name (Combination Unit) RXQ18TAYM(E) RXQ20TAYM(E)
Power Supply 3 phase, 380-415/380 V, 50/60 Hz 3 phase, 380-415/380 V, 50/60 Hz
kcal/h 43,000 48,200
1 Cooling Capacity Btu/h 171,000 191,000
kW 50.0 56.0
Casing Color Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm 1,657×1,240×765 1,657×1,240×765
Heat Exchanger Cross fin coil Cross fin coil
Type Hermetically sealed scroll type Hermetically sealed scroll type
Motor Output×
Compressor kW (4.4×1)+(4.0×1) (4.6×1)+(5.5×1)
Number of Units
Starting Method Soft start Soft start
Type Propeller fan Propeller fan
Motor Output kW 0.6×2 0.6×2
Fan
Airflow Rate m³/min 233 268
Drive Direct drive Direct drive
Connecting Liquid Pipe mm φ15.9 C1220T (Brazing connection) φ15.9 C1220T (Brazing connection)
Pipes Gas Pipe mm φ28.6 C1220T (Brazing connection) φ28.6 C1220T (Brazing connection)
Mass kg 285 320
2 Sound pressure level dB(A) 62 65
High pressure switch, Fan driver overload protector, High pressure switch, Fan driver overload protector,
Safety Devices
Over current relay, Inverter overload protector Over current relay, Inverter overload protector
Capacity Control % 10-100 8-100
Refrigerant Name R410A R410A
Refrigerant Charge kg 10.5 11.8
Control Electronic expansion valve Electronic expansion valve
Refrigerator Oil Refer to the nameplate of compressor Refer to the nameplate of compressor
Installation manual, Operation manual, Connection pipes, Installation manual, Operation manual, Connection pipes,
Standard Accessories
Clamps Clamps
Specifications C: 3D103801B C: 4D104132B
Drawing No.
Sound level C: 4D103819 C: 4D103820
676 RXQ-TA(S)
EDMT341410C Specifications
23
RXQ-TA(S) 677
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
678 RXQ-TA(S)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
23
RXQ-TA(S) 679
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
680 RXQ-TA(S)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
23
RXQ-TA(S) 681
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
682 RXQ-TA(S)
EDMT341410C Specifications
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
23
RXQ-TA(S) 683
Specifications EDMT341410C
Notes:
Conversion formulae
1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2. Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5m. kcal/h=kW×860
Btu/h=kW×3412
During actual operation, these values are normally somewhat higher as a result of ambient conditions. cfm=m³/min×35.3
3. Refer to Capacity Tables for the power input (PI) (Compressor + Outdoor fan motor).
4. Models with (E) feature components treated for heat and rust corrosion resistance, such as external panels, fan motor, and electric
component box, in addition to the fins of the heat exchanger. These models are designed specifically for use in areas which are subject to
salt damage and atmospheric pollution. Please contact Daikin for more information.
684 RXQ-TA(S)
EDMT341410C Dimensions
2. Dimensions
2.1 Independent Unit
RXQ18TAYM / RXQ20TAYM
Unit: mm
3D084507E
23
RXQ-TA(S) 685
Dimensions EDMT341410C
RXQ22TASYM / RXQ24TASYM
3D084457D
Unit: mm
686 RXQ-TA(S)
EDMT341410C Dimensions
3D084458C
Unit: mm
23
RXQ-TA(S) 687
Dimensions EDMT341410C
3D084462C
Unit: mm
688 RXQ-TA(S)
EDMT341410C Dimensions
RXQ42TASYM / RXQ44TASYM
3D084528C
Unit: mm
23
RXQ-TA(S) 689
Dimensions EDMT341410C
3D084464C
Unit: mm
690 RXQ-TA(S)
EDMT341410C Service Space
3. Service Space
RXQ18TAYM / RXQ20TAYM / RXQ22TASYM / RXQ24TASYM / RXQ26TASYM / RXQ28TASYM /
RXQ30TASYM / RXQ32TASYM / RXQ34TASYM / RXQ36TASYM / RXQ38TASYM / RXQ40TASYM /
RXQ42TASYM / RXQ44TASYM / RXQ46TASYM / RXQ48TASYM / RXQ50TASYM
Unit: mm
3D084449B
23
RXQ-TA(S) 691
Piping Diagrams EDMT341410C
4. Piping Diagrams
RXQ18TAYM / RXQ20TAYM
3D081792A
692 RXQ-TA(S)
EDMT341410C Wiring Diagrams
5. Wiring Diagrams
RXQ18TAYM
2D103875
23
RXQ-TA(S) 693
Wiring Diagrams EDMT341410C
RXQ20TAYM
2D103876
694 RXQ-TA(S)
EDMT341410C Field Wiring
6. Field Wiring
RXQ18TAYM / RXQ20TAYM
3D084395D
23
RXQ-TA(S) 695
Field Wiring EDMT341410C
3D084407D
696 RXQ-TA(S)
EDMT341410C Field Wiring
3D084410D
23
RXQ-TA(S) 697
Electric Characteristics EDMT341410C
7. Electric Characteristics
RXQ18TAYM / RXQ20TAYM / RXQ22TASYM / RXQ24TASYM / RXQ26TASYM / RXQ28TASYM /
RXQ30TASYM / RXQ32TASYM / RXQ34TASYM
3D105349
698 RXQ-TA(S)
EDMT341410C Electric Characteristics
3D105346
23
RXQ-TA(S) 699
Safety Devices Setting EDMT341410C
700 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 701
Capacity Tables (Space Saving Type) EDMT341410C
702 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 703
Capacity Tables (Space Saving Type) EDMT341410C
704 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 705
Capacity Tables (Space Saving Type) EDMT341410C
706 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 707
Capacity Tables (Space Saving Type) EDMT341410C
708 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 709
Capacity Tables (Space Saving Type) EDMT341410C
710 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 711
Capacity Tables (Space Saving Type) EDMT341410C
712 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 713
Capacity Tables (Space Saving Type) EDMT341410C
714 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 715
Capacity Tables (Space Saving Type) EDMT341410C
716 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 717
Capacity Tables (Space Saving Type) EDMT341410C
9.2 Cooling Capacity Tables for VRV Indoor Units Only (Te: 9ºC)
718 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 719
Capacity Tables (Space Saving Type) EDMT341410C
720 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 721
Capacity Tables (Space Saving Type) EDMT341410C
722 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 723
Capacity Tables (Space Saving Type) EDMT341410C
724 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 725
Capacity Tables (Space Saving Type) EDMT341410C
726 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 727
Capacity Tables (Space Saving Type) EDMT341410C
728 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 729
Capacity Tables (Space Saving Type) EDMT341410C
730 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 731
Capacity Tables (Space Saving Type) EDMT341410C
732 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 733
Capacity Tables (Space Saving Type) EDMT341410C
734 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ-TA(S) 735
Capacity Tables (Space Saving Type) EDMT341410C
736 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
3D085308B
23
RXQ-TA(S) 737
Capacity Tables (Space Saving Type) EDMT341410C
3D085311B
738 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ22TASYM
3D085310B
23
RXQ-TA(S) 739
Capacity Tables (Space Saving Type) EDMT341410C
RXQ24TASYM / RXQ36TASYM
3D085303B
740 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ46TASYM
3D085313B
23
RXQ-TA(S) 741
Capacity Tables (Space Saving Type) EDMT341410C
RXQ48TASYM
3D085314B
742 RXQ-TA(S)
EDMT341410C Capacity Tables (Space Saving Type)
RXQ50TASYM
3D085318B
23
RXQ-TA(S) 743
Operation Limits EDMT341410C
3D084453B
744 RXQ-TA(S)
EDMT341410C Sound Levels
4D103819
RXQ20TAYM
4D103820
23
RXQ-TA(S) 745
Accessories EDMT341410C
12. Accessories
12.1 Optional Accessories
RXQ18TAYM(E)
Optional accessories
RXQ20TAYM(E)
KHRP26M22H, KHRP26M33H, KHRP26M72H
Distributive REFNET header
(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
Piping
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T
3D085296H
RXQ26TASYM(E) RXQ34TASYM(E)
Optional accessories RXQ22TASYM(E) RXQ24TASYM(E) RXQ28TASYM(E) RXQ36TASYM(E)
RXQ30TASYM(E) RXQ38TASYM(E)
RXQ32TASYM(E) RXQ40TASYM(E)
KHRP26M22H
(Max. 4 branch),
KHRP26M33H KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H
REFNET header (Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
(Max. 8 branch),
Distributive KHRP26M72H
Piping (Max. 8 branch)
KHRP26A22T,
REFNET joint KHRP26A33T, KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
KHRP26A72T
Pipe size reducer — KHRP26M73TP, KHRP26M73HP
Outdoor unit multi connection piping kit BHFP22P100
3D085296H
RXQ42TASYM(E) RXQ46TASYM(E)
Optional accessories RXQ48TASYM(E)
RXQ44TASYM(E)
RXQ50TASYM(E)
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H
Distributive REFNET header (Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
Piping
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
Pipe size reducer KHRP26M73TP, KHRP26M73HP
Outdoor unit multi connection piping kit BHFP22P151
3D085296H
746 RXQ-TA(S)
EDMT341410C
Part 7
Installation of
Outdoor Units
1. Centre of Gravity .................................................................................748
2. Foundation of Units .............................................................................749
3. Installation Manual ..............................................................................750
3.1 RXQ-TAYM ..........................................................................................750
4. REFNET Pipe System.........................................................................790
4.1 Layout Example....................................................................................790
4.2 REFNET Joints and Headers ...............................................................792
5. REFNET Joint and Header .................................................................794
5.1 REFNET Joint (Branch Kit) ..................................................................794
5.2 REFNET Header (Branch Kit) ..............................................................798
5.3 Reducer................................................................................................802
5.4 Outdoor Unit Multi Connection Piping Kit .............................................803
6. Caution Label ......................................................................................809
6.1 RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM .................809
6.2 RXQ14TAYM / RXQ16TAYM / RXQ18TAYM / RXQ20TAYM ............813
24
1. Centre of Gravity
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM
Unit: mm
4D085346A
4D085343A
2. Foundation of Units
RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM / RXQ14TAYM / RXQ16TAYM / RXQ18TAYM /
RXQ20TAYM
3D084454B
Unit: mm
24
3. Installation Manual
3.1 RXQ-TAYM
3P342965-8R
24
3P342965-8R
3P342965-8R
24
3P342965-8R
3P342965-8R
9 7 15 9
7 15
16
16 8 4 8 4
5 3 3
5
17 17
10 10 10
2 13 12
1 6
6
12 11 1
11
3
3
6
9
9
8
8
14
14
4
4
4
5
5
16
16
17
17
15
12 15 11 2 13 1
11 1
24
3P342965-8R
3P342965-8R
In places with weak reception, keep distances of 3 m or more to avoid RXQ14~20 1076
electromagnetic disturbance of other equipment and use conduit tubes
for power and transmission lines.
737
The refrigerant R410A itself is nontoxic, non-flammable and is
safe. If the refrigerant should leak however, its concentration
may exceed the allowable limit depending on room size. Due to
this, it could be necessary to take measures against leakage. 4-15x22.5
1657
soldered joints may corrode, causing refrigerant to leak.
- Locations where a mineral oil mist, spray or vapour may be
present in the atmosphere. Plastic parts may deteriorate and
131 122
fall off or cause water leakage.
515
276
- Locations where equipment that produces electromagnetic
259
179
waves is found. The electromagnetic waves may cause the 76 76 97 107
control system to malfunction, preventing normal operation. 137 272
765 328
- Locations where flammable gases may leak, where thinner, 373
gasoline and other volatile substances are handled, or where (mm) 1240
aa aa
f
737
aa
d
4-15x22.5
1657
122
515
276
259
179
131
76 76
97 107
137 272
765 328
373
(mm) 930
24
3P342965-8R
3P342965-8R
24
3P342965-8R
9.2.4 Piping between BP unit and RA indoor unit: G Pipe Ø (mm) Minimal thickness t (mm)
Only in case RA indoor units are connected. Ø 6.4 (1/4“)
Indoor unit capacity index Gas pipe (mm) Liquid pipe (mm) Ø 9.5 (3/8“) 0.80
6~8 Ø19.1 (3/4“) Ø22.2 (7/8“) Indoor unit capacity index Model refrigerant branch kits
Ø9.5 (3/8“) Ø12.7 (1/2“)
10 Ø22.2 (7/8“) Ø25.4 (1“)(a) <200 KHRP26M22H
12~14 Ø28.6 (1 1/8“)(b) 200x<290 KHRP26M33H
Ø12.7 (1/2“) Ø15.9 (5/8“)
16 290x<640 KHRP26M72H (a)
Ø28.6 (1 1/8“) Ø31.8 (1 1/4“)(a)
18~22 6 4 0 KHRP26M73H + KHRP26M73HP
Ø15.9 (5/8“) Ø19.1 (3/4“)
24 Ø34.9 (1 3/8“)(b) (a) If the pipe size above the REFNET header is Ø34.9 or more, KHRP26M73HP is
required.
26~34 Ø34.9 (1 3/8“) Ø38.1 (1 1/2“)(a)
Ø19.1 (3/4“) Ø22.2 (7/8“)
36~60 Ø41.3 (1 5/8“)(b) INFORMATION
(a) If this pipe diameter is unobtainable on site, please do not size up a pipe diameter. Maximum 8 branches can be connected to a header.
(Without size up the pipe diameter, capacity will great decreased, but equivalent
piping length can be extended up to 190m)
(b) Please use this pipe diameter only.(Without size up the pipe diameter, equivalent
t How to choose an outdoor multi connection piping kit. Choose
piping length can be extended up to 190m) from the following table in accordance with the number of
outdoor units.
The pipe thickness of the refrigerant piping shall comply with the Number of outdoor units Branch kit name
applicable legislation. The minimal pipe thickness for R410A 2 BHFP 22P100
piping must be in accordance with the table below.
3 BHFP 22P151
NOTICE
Refrigerant branch kits can only be used with R410A.
11
3P342965-8R
Total piping length: total piping length from the outdoor(1) to all indoor
units.
Difference in height between outdoor and indoor units: H1.
Difference in height between indoor and indoor units: H2.
Difference in height between outdoor and outdoor units: H3.
Difference in height between outdoor and BP unit: H4.
Difference in height between BP unit and BP unit: H5.
Difference in height between BP unit and RA indoor unit: H6.
(1) In case of multi outdoor system, re-read to the first outdoor unit multi connection
piping kit as seen from the indoor unit.
(2) Assume equivalent piping length of REFNET joint=0.5 m and REFNET
header=1 m (for calculation purposes).
Single outdoor
i
a a
A B
a b c d e f g k
H1 H1 b j
A B C D E F G
p 7 8 H1
h i j k l m n H2
1 2 3 4 5 6 7 c d e f g h b c d e f g h i
1 2 3 4 5 6 1 2 3 4 5 6 7
H2 8
H2 8
Example 1.1 Example 1.2 Example 1.3
Multi outdoor
H3 H3 H3
Indoor unit r t
r s t s r s t
u u a u
a b c d e f g A B H1 a
REFNET joint H1 H1
A B C D E F G b j k
p 7 8
h i j k l m n H2
REFNET header 1 2 3 4 5 6 7 c d e f g h b c d e f g h i
8 1 2 3 4 5 6 1 2 3 4 5 6 7
Outdoor multi 8
connection piping
kit Example 2.1 Example 2.2 Example 2.3
24
12
3P342965-8R
Example 3 : with standard multi layout c. When the piping size is increased (step b), the piping length has
to be counted as double (except for the main pipe and the pipes
that are not increased in pipe size).
The total piping length has to be within limitations (see table
above).
r s t Example:
a+b*2+c*2+d*2+e*2+f*2+g*2+h+i+j+k+l+m+n+p1000 m
(500 m).
u d. The piping length difference between the nearest indoor from
first branch to the outdoor unit and farthest indoor to the outdoor
unit is 40 m.
t Between outdoor branch and outdoor unit. Example: The farthest indoor unit 8. The nearest indoor unit 1
Actual piping length 10 m Example 3 (a+b+c+d+e+f+g+p)–(a+h)40 m.
r, s, t10 m; u5 m
Equivalent length 13 m —
9.4.3 System containing VRV indoor units and RA indoor units
Maximum allowable height difference
System setup
H1 50 m (a)
H2 30 m
H3 5 m
(a) Conditional extension up till 90 m is possible. a b d
In case the outdoor location is higher than indoor: extension is possible up till A B
90 m and following 2 conditions must be fulfilled: c
Liquid piping size up (see table "Size up" on page11).
Dedicated setting on outdoor unit is required H4
(see [2-49] in Monitoring function and field settings, page 34) e f g
H5 BP1 6 7
In case the outdoor location is lower than indoor: extension is possible up till 90 m H1
and following 1 condition must be fulfilled: h i j BP2
Liquid piping size up (see table "Size up" on page11). 1 2 3 H2 k
4 H6 l
Maximum allowable length after branch
5
The pipe length from the first refrigerant branch kit to the indoor unit
Header
40 m.
BP box
Example 1.1: unit 8: b+c+d+e+f+g+p40 m 1~5 RA indoor units
6,7 VRV indoor units
Example 1.2: unit 6: b+h40 m, unit 8: i+k40 m
Maximum allowable length
Example 1.3: unit 8: i40 m
t Between outdoor unit and indoor unit.
(3) If this pipe diameter is unobtainable on site, the piping length Maximum allowable length after branch
limitation cannot extended.
The pipe length from the first refrigerant branch kit to the indoor unit
50 m.
13
3P342965-8R
1 To indoor unit
2 Piping between outdoor units
1 1
2 2
t Bottom connection
Remove the knock out holes on the bottom frame and route the 1 To indoor unit
2 Piping between outdoor units
piping under the bottom frame (see figure below).
1
2 1 2 1 2
1 To indoor unit
2 Oil collects to the outmost outdoor unit when the system
stops
24
14
3P342965-8R
Correct configuration Block all gaps in the holes for passing out piping and wiring using
sealing material (field supply) (the capacity of the unit will drop and
small animals may enter the machine).
Example: passing piping out through the front.
1 1 Close the areas marked with " ".
1
(When the piping is routed from the
1 1 front panel.)
1 To indoor unit
t If the piping length between the outdoor units exceeds 2m,
create a rise of 200mm or more in the gas line within a length of
2m from the kit.
If 2 m
1 To indoor unit
2 Piping between outdoor units NOTICE
If >2 m After all the piping has been connected, make sure there is
no gas leak. Use nitrogen to perform a gas leak detection.
1 t Make sure to blow through with nitrogen when brazing. Blowing
through with nitrogen prevents the creation of large quantities of
1 To indoor unit
oxidized film on the inside of the piping. An oxidized film
2 Piping between outdoor units adversely affects valves and compressors in the refrigerating
system and prevents proper operation.
t The nitrogen pressure should be set to 0.02MPa (i.e., just
enough so it can be felt on the skin) with a pressure-reducing
valve.
10. Precautions on refrigerant piping 1 2 3 4 5
15
3P342965-8R
10.2 Connecting the refrigerant piping Use the following procedure to remove the pinched piping:
1 Remove the valve cover and make sure that the stop valves are
fully closed.
NOTICE
1 Service port and service
Installation shall be done by an installer, the choice of 1
port cover
materials and installation shall comply with the applicable 2 Stop valve
legislation. 3 Field piping connection
2
4 Stop valve cover
3
4
10.2.1 Decide front or side (bottom) connection
Installation of refrigerant piping is possible as front connection or side
connection (when taken out from the bottom) as shown in the figure
below.
1 Left-side connection
2 Front connection 2 Connect the vacuuming/recovery unit to service ports of all stop
3 Right-side connection valves.
6 9
3 8 7
1 A
1 2 11
B
For side connections, the knockout hole on the bottom plate should
4 10 12
be removed:
3 Recover gas and oil from the pinched piping by using a recovery
unit.
t When passing electrical wiring through the knockout CAUTION
holes, wrap the wiring with protective tape to prevent
damage as shown above. Do not vent gases into the atmosphere.
4 When all gas and oil is recovered from the pinched piping,
10.2.2 Remove the pinched pipes disconnect the charge hose and close the service ports.
WARNING
Any gas or oil remaining inside the stop valve may blow off
the pinched piping.
Failure to observe the instructions in procedure below
properly may result in property damage or personal injury,
which may be serious depending on the circumstances.
24
16
3P342965-8R
5 Cut off the lower part of the smaller pinched piping with an 10.2.4 Branching the refrigerant piping
appropriate tool (e.g., pipe cutter, a pair of nippers, …). Let the t For installation of the refrigerant branching kit, refer to the
remaining oil drip out in case the recovery was not complete. installation manual delivered with the kit.
3
2
1 Pinched piping (small)
2 Stop valve
3 Service port
4 Pinched piping (large)
4
±30°
1 1
A
Wait until all oil is dripped out.
6 Remove the pinched piping (large)
1
WARNING
B
If there is residual oil or gas in the valve piping, removing
the flattened pipe (large) can crack the shutoff valve and 1 Horizontal surface
injure human body due to the flame caused by residual oil.
1 Mount the REFNET joint so that it branches either horizontally
or vertically.
7 Wait until all oil is dripped out before continuing with the 2 Mount the REFNET header so that it branches horizontally.
connection of the field piping in case the recovery was not
complete.
t Installation of the multi connection piping kit.
max
15 A
B
NOTICE
Precautions when connecting field piping. Add brazing
1
material as shown in the figure.
1
1
G
2 2 Liq as>12
>42 0 m
1 >50 0 mm m
1 0m
m
NOTICE
t Be sure to use the supplied accessory pipes when 1 Install the joints horizontally, so that the caution label (1)
carrying out piping work in the field. attached to the joint comes to the top.
- Do not tilt the joint more than 15° (see view A).
t Be sure that the field installed piping does not touch
- Do not install the joint vertically (see view B).
other pipes, the bottom panel or side panel. Especially
for the bottom and side connection, be sure to protect 2 Make sure that the total length of the piping connected to the
the piping with suitable insulation, to prevent it from joint is absolute straight for more than 500 mm.
coming into contact with the casing. Only if a straight field pipe lenght.
- Gas field pipe lenght > 120 mm.
Connection from the stop valves to the field piping can be done by - Liquid field pipe lenght > 420 mm.
using accessory pipes supplied as accessory.
3 Improper installation may lead to malfunction of the outdoor
The connections to the branch kits are the responsibility of the unit.
installer (field piping).
17
3P342965-8R
24
3P342965-8R
Yes
When all piping work is complete, it is necessary to:
t Check for any leakages in the refrigerant piping.
The indoor units and/or No Use procedure
outdoor unit were already "10.4.2. Installation of
t Perform vacuum drying to remove all moisture, air or nitrogen in
powered ON? refrigerant piping, leak test, the refrigerant piping.
vacuuming before electrical
Yes installation is done (regular If there is a possibility of moisture being present in the refrigerant
installation method)" piping (for example, rainwater may have entered the piping), first
Use procedure carry out the vacuum drying procedure below until all moisture has
"10.4.3. Installation of been removed.
refrigerant piping, leak test,
vacuuming after electrical All piping inside the unit has been factory tested for leaks.
installation is done on any
indoor or outdoor unit" Only field installed refrigerant piping needs to be checked. Therefore,
make sure that all the stop valves are firmly closed before performing
leak test or vacuum drying. (See “10.4.4 Set up” and “10.4 Leak test
and vacuum drying”)
10.4.1 General guidelines
t Use a 2-stage vacuum pump with a non-return valve which can 10.4.4 Setup
evacuate to a gauge pressure of –100.7 kPa (5 Torr absolute, 6 9 9 9
–755 mm Hg).
1 7
t Connect the vacuum pump to the service port of all 3 stop valves 8
to increase efficiency (refer to "10.4.4.Setup").
4 A
10
NOTICE 2 3 5 B 11
14
12
Do not purge the air with refrigerants. Use a vacuum pump
13
to evacuate the installation.
1 Pressure reducing valve
2 Nitrogen
10.4.2 Installation of refrigerant piping, leak test, vacuuming 3 Measuring instrument
before electrical installation is done (regular installation 4 Refrigerant R410A tank (siphon system)
method) 5 Vacuum pump
6 Charge hose
When all piping work is complete, it is necessary to: 7 Gas line stop valve
t Check for any leakages in the refrigerant piping. 8 Liquid line stop valve
9 Outdoor unit
t Perform vacuum drying to remove all moisture, air or nitrogen in
10 To indoor unit
the refrigerant piping. 11 Stop valve
If there is a possibility of moisture being present in the refrigerant 12 Field piping
piping (for example, rainwater may have entered the piping), carry 13 Gas flow
14 Stop valve service port
out the vacuum drying procedure below until all moisture has been
A Valve A
removed. B Valve B
All piping inside the unit has been factory tested for leaks.
Which valves? State of valves
Only field installed refrigerant piping needs to be checked. Therefore, State of the valves A and B and Performing the airtightness test and
make sure that all the outdoor unit stop valves are firmly closed the stop valve vacuum drying (Valve A always close,
before performing leak test or vacuum drying. if not may be cause of refrigerant
leakage)
NOTICE Valve A Open
Make sure that all (field supplied) field piping valves are Valve B Open
OPEN (not outdoor unit stop valves!) before you start leak Liquid side stop valve Close
test and vacuuming.
Gas side stop valve Close
19
3P342965-8R
24
3P342965-8R
21
3P342965-8R
24
3P342965-8R
3P342965-8R
24
3P342965-8R
3P342965-8R
26
3P342965-8R
3P342965-8R
24
3P342965-8R
t Always use protective gloves and protect your eyes 50%CR70% 0 0.5
when charging refrigerant. 70%<CR85% 0.3 0.5 1.0
t When the refrigerant system is to be opened, Piping 85%<CR105% 0.7 1.0 1.5
refrigerant must be treated according to the applicable length>30 m 105%<CR130% 1.2 1.5 2.0
legislation.
130%<CR160% 1.2 1.5 2.3
160%<CR200% 1.2 1.7 2.0 2.5
t To avoid compressor breakdown. Do not charge the refrigerant When using metric piping, please take into account following table
more than the specified amount. concerning the weight factor to be allocated. It should be substituted
t This outdoor unit is factory charged with refrigerant and in the formula for R.
depending on pipe sizes and pipe lengths some systems require
additional charging of refrigerant.
Inch piping
t In case re-charge is required, refer to the nameplate of the unit. size (Ø) (mm) Weight factor
It states the type of refrigerant and necessary amount.
Ø6.4 (1/4”) 0.022
Ø9.5 (3/8”) 0.057
Ø12.7 (1/2”) 0.11
Ø15.9 (5/8”) 0.17
Ø19.1 (3/4”) 0.26
Ø22.2 (7/8”) 0.36
Total
capacity Allowable capacity connection ratio
Used indoor
units CR(a) VRV RA
VRV 50~200% 50~200% —
VRV +
50~130% 0~130% 0~130%
RA
RA 50~130% — 50~130%
29
3P342965-8R
Step 1
Calculate additional refrigerant
charge amount: R (kg) (see
“14.2 Calculating the
additional refrigerant charge”
on page 29
Step 4a
Step 2+3 Close valve A
R<Q Open valve A to field piping via R=Q
Refrigerant overcharge happened Charging is finished
Recover refrigerant to reach liquid stop valve Fill in the amount on the
R=Q Execute pre-charging amount: additional refrigerant charge
Go to step 4a Q (kg) label
Close valve A if no additional Go to test run (see "16.1 Test
refrigerant can be charged operation" on page 36)
R>Q
A
Step 4b+5
Manual refrigerant charging
method (in cooling operation)
Step 6
Activate field setting [2-20]=1
Unit will start manual refrigerant
charging operation.
Step 6
Open valve B
Charge remaining amount of
refrigerant P (kg)
R=Q+P
Step 6
Close valve B
Push BS3 to stop manual
charging
Charging is finished
Fill in the amount on the
additional refrigerant charge
label
Go to test run (see "16.1 Test
operation" on page 36)
See figure "Location of valves" on page 31; for more information refer to the text in this chapter.
24
30
3P342965-8R
Follow the steps as described below and take into account whether
CAUTION you want to use the automatic charge function or not.
t When the refrigerant charging procedure is done or 1 Calculate the additional amount of refrigerant to be added using
when pausing, close the valve of the refrigerant tank the formula mentioned in "14.2 Calculating the additional
immediately. If the tank is left with the valve open, the refrigerant charge" on page 29.
amount of refrigerant which is properly charged may
2 The first 10 kg of additional refrigerant can be charged without
get off point. More refrigerant may be charged by any
outdoor unit operation.
remaining pressure after the unit has stopped.
If the additional refrigerant amount is smaller than 10 kg,
perform the pre-charging procedure as explained in step 3 and
NOTICE 4a below.
If the additional refrigerant charge is larger than 10 kg, perform
t If the power of some units is turned off, the charging
step 3 till the end of the procedure.
procedure cannot be finished properly.
3 Pre-charging can be done without compressor running by
t In case of a multiple outdoor system, turn on the power
connecting the refrigerant bottle only to the liquid stop valve
of all outdoor units.
service port (open valve A). Make sure that the stop valves are
t Make sure to turn ON the power 6 hours before starting closed (valve B+liquid line stop valve+gas line stop valve)
the operation. This is necessary to warm the crankcase
by the electric heater.
t If operation is performed within 12 minutes after the 3 6 6 6
indoor and outdoor units are turned on, the compressor
4
will not operate before the communication is established 5
in a correct way between outdoor unit(s) and indoor
2 A
units. 7
B
t Before starting charging procedures, check if the 1 11 8
9
segment display indication of the outdoor unit A1P
10
PCB is as normal (see "Functions of the push button
switches which are located on the outdoor PCB
1 Measuring instrument
(A1P)" on page 27). If a malfunction code is present, 2 Refrigerant R410A tank (siphon system)
see "16.2. Malfunction code list" on page 37. 3 Charge hose
t Make sure all connected indoor units are recognised 4 Gas line stop valve
5 Liquid line stop valve
t Close the front panel before any refrigerant charge 6 Outdoor unit
operation is executed. Without the front panel 7 To indoor unit
attached the unit cannot judge correctly whether it is 8 Stop valve
operating properly or not. 9 Field piping
10 Gas flow
11 Stop valve service port
NOTICE A Valve A
B Valve B
In case of maintenance and the system (outdoor unit+field
piping+indoor units) does not contain any refrigerant any
more (e.g., after refrigerant reclaim operation), the unit has
4 a) If the calculated additional refrigerant amount is reached by
to be charged with its original amount of refrigerant (refer
above pre-charging procedure, close valve A.
to the nameplate on the unit) by pre-charging before the
b) If the total amount of refrigerant could not be charged by pre-
automatic charging function can be started.
charging, then close valve A and go to step 5. Follow
step 6 depending on the chosen charging method.
31
3P342965-8R
32
3P342965-8R
The second method is to enable power consumption [2-8]= Te target temperature during cooling operation
limitation based on an external input. For this operation Default value=0
an optional accessory is required.
Value
[2-8] Te target
[1-5]= shows the current Te target parameter position.
0 Auto (Default)
Refer to “15.3 Energy saving and optimum operation”
on page 35 for more details about the contents of this 2 6
value 3 7
4 8
[1-10]= shows the total number of connected indoor units.
5 9
It can be convenient to check if the total number of 6 10
indoor units which are installed match the total number
7 11
of indoor units which are recognized by the system. In
case there is a mismatch, It is advised to check the Change [2-8]=0, 2~7 in function of required operation
communication wiring path between outdoor and indoor method during cooling.
units (F1/F2 communication line).
For more information and advice about the impact of
[1-13]= shows the total number of connected outdoor units (in these settings, see “15.3 Energy saving and optimum
case of multiple outdoor system). operation” on page 35.
It can be convenient to check if the total number of [2-12]= Enable the low noise function and/or power consumption
outdoor units which are installed matches the total limitation via external control adaptor (DTA104A61/62)
number of outdoor units which are recognized by the
system. In case there is a mismatch, It is advised to If the system needs to be running under low noise
check the communication wiring path between outdoor operation or under power consumption limitation
and outdoor units (Q1/Q2 communication line). conditions when an external signal is sent to the unit,
this setting should be changed. This setting will only be
[1-17]= shows the latest malfunction code. effective when the optional external control adaptor
(DTA104A61/62) is installed.
[1-18]= shows the malfunction code which occurred 1 time
before current malfunction code. Default value=0
To activate this function change [2-12]=1.
[1-19]= shows the malfunction code which occurred 2 time
before current malfunction code. [2-18]= Fan high static pressure setting
When the latest malfunction codes were reset by In order to increase the static pressure the outdoor unit
accident on an indoor unit user interface, they can be fan is delivering, this setting should be activated. For
checked again through this monitoring settings. For the details about this setting,see technical specifications.
content or reason behind the malfunction code see
“16.2 Malfunction code list” on page 37, where most Default value=0.
relevant malfunction codes are explained. Detailed To activate this function change [2-18]=1.
information about malfunction codes can be consulted
in the service manual of this unit. [2-20]= Manual additional refrigerant charge.
[1-38]= shows the number of RA indoor units connected to the In order to add the additional refrigerant charge amount in
system. a manual way (without automatic refrigerant charging
functionality), following setting should be applied. Further
[1-40]= shows the current cooling comfort setting. See instructions regarding the different ways to charge
“15.3 Energy saving and optimum operation” on additional refrigerant into your system can be found in
page 35 for more details about this setting. chapter “14.3 Method for adding refrigerant” on page 30.
Default value=0
To activate function charge [2-21]=1
33
3P342965-8R
[2-22]= Automatic low noise setting and level during night time. [2-31]= Power consumption limitation level (step 2) via the
external control adaptor (DTA104A61/62).
By changing this setting, you activate the automatic low
noise operation function of the unit and define the level If the system needs to be running under power
of operation. Depending on the chosen level, the noise consumption limitation conditions when an external signal
level will be lowered (3:Level3<2:Level2<1:Level1). is sent to the unit, this setting defines the level power
The start and stop moments for this function are defined consumption limitation that will be applied for step 2.
under setting [2-26] and [2-27]. The level is according to the table.
[2-25]= Low noise operation level via the external control adaptor. Value Power comsumption limitation
[2-31] (approximately)
If the system needs to be running under low noise 1 4 0 % ( d e f a u lt )
operation conditions when an external signal is sent to the
2 5 0%
unit, this setting defines the level of low noise that will be
applied (3:Level3<2:Level2<1:Level1). 3 5 5%
This setting will only be effective when the optional [2-32]= Forced, all time, power consumption limitation operation
external control adaptor (DTA104A61/62) is installed and (no external control adaptor is required to perform power
the setting [2-12] was activated. consumption limitation).
This setting is used in conjunction with setting [2-22]. Change [2-32]=0,1 or 2 in function of required limitation.
[2-27]= Low noise operation stop time
Default value=3 [2-49]= Max, level difference setting
In case the outdoor location is higher than indoor,
Value Stop time automatic low noise extension is possible up till 90 m, Refer to [2-49] for
[2-27] operation (approximately) dedicated setting.
1 6:00 Value
2 7:00 [2-49] Max, level difference setting
34
3P342965-8R
[2-83]= Master user interface allocation in case VRV indoor units t Powerful
and RA indoor units are used at the same time. Undershoot (during cooling operation) is allowed compared to the
requested refrigerant temperature, in order to achieve the required
By changing setting [2-83], you can allow the VRV indoor room temperature very fast. The undershoot is allowed from the
unit to be the operation mode selector (system power start up moment.
OFF/ON is required after applying this setting). In case of cooling operation the evaporating temperature is
allowed to go down to 3°C on temporary base depending on the
t [2-83]=1 RA indoor unit has mode selection right situation.
(default setting).
t [2-83]=0 VRV indoor unit has mode selection right. When the request from the indoor units becomes more moderate,
the system will eventually go to the steady state condition which
15.3 Energy saving and optimum operation is defined by the operation method above.
This VRV IV cooling only system is equipped with advanced energy t To activate the powerful comfort setting under cooling
saving functionality. Depending on the priority, emphasises can be operation, change field setting [2-81]=3.
put on energy saving or comfort level. Several parameters can be This setting is used in conjunction with setting [2-8].
selected, resulting in the optimal balance between energy
consumption and comfort for the particular application.
t Quick
Several patterns are available and explained below. Modify the Undershoot (during cooling operation) is allowed compared to
parameters to the needs of your building and to realize the best the requested refrigerant temperature, in order to achieve the
balance between energy consumption and comfort. required room temperature very fast. The undershoot is allowed
from the start up moment.
15.3.1 Three main operation methods are available: In case of cooling operation the evaporating temperature is
allowed to go down to 6°C on temporary base depending on the
t Basic situation.
The refrigerant temperature is fixed independent from the
situation. It corresponds to the standard operation which is When the request from the indoor units becomes more moderate,
known and can be expected from/under previous VRV systems: the system will eventually go to the steady state condition which
is defined by the operation method above.
t To activate this operation method under cooling operation:
change field setting [2-8]=2. t To activate the quick comfort setting under cooling operation,
change field setting [2-81]=2.
t Automatic This setting is used in conjunction with setting [2-8].
The refrigerant temperature is set depending on the outdoor
ambient conditions. As such adjusting the refrigerant temperature t Mild
to match the required load (which is also related to the outdoor Undershoot (during cooling operation) is allowed compared to
ambient conditions). the requested refrigerant temperature, in order to achieve the
E.g., when your system is operating in cooling, you do not need required room temperature very fast. The undershoot is not
as much cooling under low outdoor ambient temperatures (e.g., allowed from the start up moment. The start up occurs under the
25°C) as under high outdoor ambient temperatures (e.g.,35°C). condition which is defined by the operation mode above.
Using this idea, the system automatically starts increasing its In case of cooling operation the evaporating temperature is
refrigerant temperature, automatically reducing the delivered allowed to go down to 6°C on temporary base depending on the
capacity and increasing the system’s efficiency. situation.
t To activate this operation method under cooling operation: When the request from the indoor units becomes more moderate,
change field setting [2-8]=0. (default) the system will eventually go to the steady state condition which
is defined by the operation method above.
t Hi-sensible The start up condition is different from the powerful and quick
The refrigerant temperature is set higher (cooling) compared to comfort setting.
basic operation. The focus under high sensible mode is comfort
feeling for the customer. The selection method of indoor units is t To activate the mild comfort setting under cooling operation,
important and has to be considered as the available capacity is change field setting [2-81]=1.
not the same as under basic operation. For details concerning to This setting is used in conjunction with setting [2-8].
Hi-sensible applications, please contact your dealer.
t Eco
t To activate this setting under cooling operation: change field The original refrigerant temperature target, which is defined by
setting [2-8] to the appropriate value, matching the the operation method (see above) is kept without any correction,
requirements of the pre-designed system containing a high unless for protection control.
sensible solution.
Value
t To activate the eco comfort setting under cooling operation,
[2-8] Te target change field setting [2-81]=0.
This setting is used in conjunction with setting [2-8].
3 7
4 8 No matter which control is selected, variations on the behaviour
5 9 of the system are still possible due to protection controls to keep
the unit operating under reliable conditions. The intentional target,
6 10
however, is fixed and will used to obtain the best balance
7 11 between energy consumption and comfort, depending on the
application type.
35
3P342965-8R
16.1.1 Precautions before starting test operation On top of this system test operation, indoor units operation should
also be checked separately.
During test operation, the outdoor unit and the indoor units will start
up:
t Make sure to carry out the system test operation after the first
installation. Otherwise, the malfunction code will be displayed
t Make sure that the preparations of all indoor units are finished on the user interface and normal operation or individual indoor
(field piping, electrical wiring, air purge, ...). See installation unit test run cannot be carried out.
manual of the indoor units for details.
t Abnormalities on indoor units cannot be checked for each unit
CAUTION separately. After the test operation is finished , check the indoor
units one by one by performing a normal operation using the
Do not insert fingers, rods or other objects into the air inlet user interface. Refer to the indoor unit installation manual for
or outlet. When the fan is rotating at high speed, it will more details concerning the individual test run.
cause injury.
INFORMATION
t It may take 10 minutes to achieve a uniform refrigerant
CAUTION state before the compressor starts.
Do not perform the test operation while working on the t During the test operation, the refrigerant running sound
indoor units. or the magnetic sound of a solenoid valve may
become loud and the display indication may change.
When performing the test operation, not only the outdoor
These are not malfunctions.
unit, but the connected indoor unit will operate as well.
Working on an indoor unit while performing a test operation
Procedure
is dangerous.
1 Close all front panels in order to not let it be the cause of
misjudgement (except the electrical component box inspection
CAUTION
opening service cover).
t During tests never pressurize the appliances with a
2 Make sure all field settings you want are set.
pressure higher than the maximum allowable
pressure (as indicated on the nameplate of the unit). 3 Turn ON the power to the outdoor unit and the connected indoor
units.
t If refrigerant gas leaks, ventilate the area immediately.
Toxic gas may be produced if refrigerant gas comes
into contact with fire. NOTICE
t Never directly touch any accidental leaking refrigerant. Be sure to turn on the power 6 hours before operation in
This could result in severe wounds caused by frostbite. order to have power running to the crankcase heater and
to protect the compressor.
DANGER: Do not touch piping and internal parts.
4 Make sure the default (idle) situation is existing; see
See "2. General safety precautions" on page 2.
"13.2 Operating the push buttons and DIP switches on the logic
board" on page 27. Push BS2 for 5 seconds or more. The unit
DANGER: Electrical shock will start test operation.
See "2. General safety precautions" on page 2. t The test operation is automatically carried out, the outdoor
unit display will indicate " " and the indication "Test
INFORMATION operation" and "Under centralized control" will display on the
user interface of indoor units.
Note that during the first running period of the unit,
Steps during the automatic system test run procedure:
required power input may be higher. This phenomenon
- " ": control before start up (pressure equalization)
originates from the compressor that requires a 50 hour run
elapse before reaching smooth operation and stable power - " ": cooling start up control
consumption. Reason is that the scroll is made out of iron - " ": cooling stable condition
and that it takes some time to smooth the surfaces that - " ": communication check
make contact. - " ": stop valve check
- " ": pipe length check
- " ": refrigerant amount check
- " ": in case [2-88]=0, detailed refrigerant situation
check
- " ": pump down operation
- " ": unit stop
t During the test operation, it is not possible to stop the unit
operation from a user interface. To abort the operation, press
BS3. The unit will stop after ±30 seconds.
24
36
3P342965-8R
INFORMATION
Refer to the installation manual of the indoor unit for other
detailed malfunction codes related to indoor units.
37
3P342965-8R
Below table gives an overview of the malfunction codes which may appear.
Malfunction code
Main Sub code
code Master/slave 1/slave 2 Contents Solution
01/03/05 High pressure switch was activated (S1PH, S2PH) - A1P Check stop valve situation or abnormalities in (field) piping or
(X3A; X4A) airflow over air cooled coil.
02/04/06 Refrigerant overcharge Check refrigerant amount+recharge unit
Stop valve closed Open stop valves
13/14/15 Stop valve closed (liquid) Open liquid stop valve
18 Refrigerant overcharge Check refrigerant amount+recharge unit
Stop valve closed Open stop valves
01/02/03 Low pressure malfunction: Open stop valves
Stop valve closed Check refrigerant amount+recharge unit
Refrigerant shortage Check the user interface's display or
Indoor unit malfunction Transmission wiring between the outdoor unit and the
indoor unit
01/05/08 Electronic expansion valve malfunction (subcool) (Y2E) - A1P Check connection on PCB or actuator
(X21A)
04/07/10 Electronic expansion valve malfunction (main) (Y1E) - A1P Check connection on PCB or actuator
(X23A)
16/22/28 Discharge temperature sensor malfunction (R21T): open Check connection on PCB or actuator
circuit - A1P (X29A)
17/23/29 Discharge temperature sensor malfunction (R21T): short Check connection on PCB or actuator
circuit - A1P (X29A)
18/24/30 Discharge temperature sensor malfunction (R22T): open Check connection on PCB or actuator
circuit - A1P (X29A)
19/25/31 Discharge temperature sensor malfunction (R22T): short Check connection on PCB or actuator
circuit - A1P (X29A)
47/49/51 Compressor casing temperature sensor malfunction (R8T): Check connection on PCB or actuator
open circuit - A1P (X29A)
48/50/52 Compressor casing temperature sensor malfunction (R8T): Check connection on PCB or actuator
short circuit - A1P (X29A)
01/03/05 Suction temperature sensor malfunction (R3T) - A1P (X30A) Check connection on PCB or actuator
01/02/03 De-icing temperature sensor malfunction (R7T) - A1P (X30A) Check connection on PCB or actuator
06/07/08 Liquid temperature sensor (after subcool HE) malfunction Check connection on PCB or actuator
(R5T) - A1P (X30A)
01/02/03 Liquid temperature sensor (coil) malfunction (R4T) - A1P Check connection on PCB or actuator
(X30A)
01/02/03 Gas temperature sensor (after subcool HE) malfunction (R6T) Check connection on PCB or actuator
- A1P (X30A)
06/08/10 High pressure sensor malfunction (S1NPH): open circuit - Check connection on PCB or actuator
A1P (X32A)
07/09/11 High pressure sensor malfunction (S1NPH): short circuit - Check connection on PCB or actuator
A1P (X32A)
06/08/10 Low pressure sensor malfunction (S1NPL): open circuit - A1P Check connection on PCB or actuator
(X31A)
07/09/11 Low pressure sensor malfunction (S1NPL): short circuit - A1P Check connection on PCB or actuator
(X31A)
14 Transmission outdoor unit - inverter: INV1 transmission Check connection
trouble - A1P (X20A, X28A, X40A)
19 Transmission outdoor unit - inverter: FAN1 transmission Check connection
trouble - A1P (X20A, X28A, X40A)
24 Transmission outdoor unit - inverter: FAN2 transmission Check connection
trouble - A1P (X20A, X28A, X40A)
30 Transmission outdoor unit - inverter: INV2 transmission Check connection
trouble - A1P (X20A, X28A, X40A)
24
38
3P342965-8R
Malfunction code
Main Sub code
code Master/slave 1/slave 2 Contents Solution
01/02/03 INV1 unbalanced power supply voltage Check if power supply is within range
07/08/09 INV2 unbalanced power supply voltage Check if power supply is within range
01/05/07 Reversed power supply phase malfunction Correct phase order
04/06/08 Reversed power supply phase malfunction Correct phase order
01/08/11 INV1 voltage power shortage Check if power supply is within range
02/09/12 INV1 power phase loss Check if power supply is within range
22/25/28 INV2 voltage power shortage Check if power supply is within range
23/26/29 INV2 power phase loss Check if power supply is within range
03 Malfunction code: System test run not yet executed Execute system test run
(system operation not possible) Execute autocharge function (see manual); unit not ready
Warning indication: Leak detection or refrigerant amount for leak detection functionality
check not performed (system operation possible)
04 System test run abnormal ending Execute test run again
01 Faulty wiring to Q1/Q2 or indoor - outdoor Check (Q1/Q2) wiring
03 Faulty wiring to Q1/Q2 or indoor - outdoor Check (Q1/Q2) wiring
01 Warning: faulty wiring to Q1/Q2 Check Q1/Q2 wiring
02 Malfunction code: faulty wiring to Q1/Q2 Check Q1/Q2 wiring
11 Too many indoor units are connected to F1/F2 line Check indoor unit amount and total capacity connected
Bad wiring between outdoor and indoor units
01 System mismatch. Wrong type of indoor units combined Check if other indoor units have malfunction and confirm
(R410A, R407C, RA). indoor unit mix is allowed.
Indoor unit malfunction.
03 Connection malfunction over indoor units or type mismatch Check if other indoor units have malfunction and confirm
(R410A, R407C, RA). indoor unit mix is allowed.
18 Connection malfunction over indoor units or type mismatch Check if other indoor units have malfunction and confirm
(R410A, R407C, RA). indoor unit mix is allowed.
31 Wrong unit combination (multi system) Check if unit types are compatible
49 Wrong unit combination (multi system) Check if unit types are compatible
01 Auto address malfunction (inconsistency) Check if transmission wired unit amount matches with
powered unit amount (by monitor mode) or wait till
initialisation is finished.
01 Auto address malfunction (inconsistency) Check if transmission wired unit amount matches with
powered unit amount (by monitor mode) or wait till
initialisation is finished.
05 Stop valve closed or wrong (during system test run) Open stop valves
INFORMATION
References can be found on the wiring diagram.
Information code
Main code Contents Solution
Leak detection function related
Unit is not prepared to execute leak detection operation Refer to requirements to be able to execute leak detection
operation.
Indoor unit is out of temperature range for leak detection Retry when ambient conditions are satisfied
operation
Outdoor unit is out of temperature range for leak detection Retry when ambient conditions are satisfied
operation
Too low pressure was noticed during leak detection operation Restart leak detection operation
Indicates an indoor unit which is not compatible with leak Refer to requirements to be able to execute leak detection
detection functionality is installed operation.
39
3P342965-8R
17. Operation of the unit 2 Calculate the volume of the room (m 3) where the indoor unit is
installed.
Once the unit is installed and test operation of outdoor unit and In a case such as the following, calculate the volume of (A), (B)
indoor units is finished, the operation of the system can start. as a single room or as the smallest room.
For operating the indoor unit, the user interface of the indoor unit A Where there are no smaller room divisions:
should be switched ON. Refer to the indoor unit operation manual for
more details.
2 installed
NOTICE
Where a single refrigerant facility is divided into 2 entirely
independent refrigerant systems, use the amount of
refrigerant with which each separate system is charged.
24
40
3P342965-8R
Indoor unit
(Piping consists of REFNET headers only)
Outdoor unit
Header branch fitting
Outdoor unit
(Piping including both headers and joints)
Units can be added by connecting them directly to the REFNET header or REFNET joint. Further branches cannot be
included in the system below the REFNET header branch.
Notes:
1. When the capacity ratio of the indoor system to the outdoor unit is more than 100% and when all the indoor units
are in operation at the same time then the rated capacity of each unit will be somewhat reduced.
2. Special purpose REFNET pipe components must be used for all the pipe work. For further details concerning
choice of components, types of components, etc.
0.16 0.18 0.20 0.25 0.35 0.40 0.45 0.55 0.60 0.65 0.75
0.5
1.0
* When the equivalent piping length in cooling operation is calculated, the gas pipe size is selected.
When the equivalent piping length in heating operation is calculated, the liquid pipe size is selected.
24
Make sure that all branch pipes are fitted such that they branch either horizontally or vertically.
When the size of the selected field piping is different from that of branch pipe then the connecting section should
be cut with a pipe cutter as shown in the figure below.
When you are cutting an inlet or outlet pipe with a pipe cutter make sure that you make the cut in the center of the
connection area.
Branch pipes must be insulated in accordance with the handbook which comes with each kit.
When the number of indoor units to be connected to the branch pipes is less than the number of branch pipes
available for connection then cap pipes should be fitted to the surplus branches.
When the size of the selected field piping is different from that of branch pipe then the connecting section should
be cut with a pipe cutter as shown in the figure below.
When field piping is connected to the B section of the inlet/outlet pipe on the outdoor unit side of the liquid pipe
header.
Cut the B section with a pipe cutter as shown below and connect it to the A section.
Connect the flared section of the field pipe to the B section.
Fit the branch pipe so that the branch lies in a horizontal plane.
The branch pipe must be insulated in accordance with the instruction manual which comes with each kit.
1. Use the insulator included in the kit to insulate the header.
2. Joints between insulators included in the kit and those already applied to the field piping should be sealed with the
tape which is also included in each kit.
3. Any cap pipes should also be insulated using the insulator provided with each kit and then taped as described
above.
24
KHRP26A22T Unit: mm
C: D3K05234B
KHRP26A33T Unit: mm
C: D3K05235C
KHRP26A72T Unit: mm
C: D3K05236B
KHRP26A73T Unit: mm
C: D3K05237B
24
2P182411-1
2P182411-1
24
KHRP26M22H Unit: mm
SUCTION GAS SIDE
INSULATION
ACCESSORY
REDUCER: SUCTION GAS SIDE: 3 pcs
LIQUID SIDE: 2 pcs
PINCHED PIPE: 1 set
INSULATION: 1 set
INSTALLATION MANUAL
J: D3K03629C
KHRP26M33H Unit: mm
SUCTION GAS SIDE
INSULATION
ACCESSORY
REDUCER: SUCTION GAS SIDE: 3 pcs
LIQUID SIDE: 2 pcs
PINCHED PIPE: 1 set
INSULATION: 1 set
INSTALLATION MANUAL
LIQUID SIDE INSULATION
J: D3K03630C
KHRP26M72H Unit: mm
SUCTION GAS SIDE
INSULATION
ACCESSORY
REDUCER: SUCTION GAS SIDE: 2 pcs
LIQUID SIDE: 3 pcs
PINCHED PIPE: 1 set
INSULATION: 1 set
INSTALLATION MANUAL
LIQUID SIDE INSULATION
J: D3K03631C
KHRP26M73H Unit: mm
SUCTION GAS SIDE
INSULATION
ACCESSORY
REDUCER: SUCTION GAS SIDE: 6 pcs
LIQUID SIDE: 7 pcs
PINCHED PIPE: 1 set
INSULATION: 1 set
INSTALLATION MANUAL
LIQUID SIDE INSULATION
24
J: D3K03632C
3P113151-1C
3P113151-1C
24
5.3 Reducer
KHRP26M73TP / KHRP26M73HP
C: 3P113129-1B
BHFP22P100
Gas side Unit: mm
3D052312
24
3D052280
BHFP22P151
Gas side Unit: mm
3D052314
3D052279
BHFP22P100 / BHFP22P151
24
1P173261-1A
1P173261-1A
24
1P173262-1A
1P173262-1A
6. Caution Label
6.1 RXQ6TAYM / RXQ8TAYM / RXQ10TAYM / RXQ12TAYM
2P343554-1C
24
2P343554-1C
3P342938-1A
24
3P342938-1A
3P346357-1A
24
3P350959-1D
3P350959-1D
24
3P350960-1C
3P350960-1C
24
3P350960-1C
3P343021-1A
24
3P343021-1A
Part 8
Option of Control
1. Option List of Controllers.....................................................................822
1.1 Operation Control System Optional Accessories .................................822
1.2 System Configuration ...........................................................................823
1.3 Building Management System..............................................................824
25
Type
No. Item FXLQ-MA FXBQ-P
FXSQ-P FXMQ-P FXMQ-MA FXHQ-MA FXAQ-P FXNQ-MA FXVQ-N FXBPQ-P
Wireless C/O BRC4C66 BRC4C64 BRC7EA66 BRC7EA619 BRC4C64 — BRC4C64
Remote
1 Note 8
controller Wired BRC1C62 BRC1C62
BRC1C62
Navigation remote controller Note 7 Note 9 Note 7
2 (Wired remote controller) BRC1E62 BRC1E62 BRC1E62
Simplified remote
3 BRC2C51 — BRC2C51 — BRC2C51
controller (Exposed type)
Remote controller for hotel
4 BRC3A61 — BRC3A61 — BRC3A61
use (Concealed type)
5 Adaptor for wiring KRP1C64 KRP1B61 KRP1BA54 — KRP1B61 KRP1C67 KRP1B61
Wiring adaptor for
6-1 KRP2A61 KRP2A61 KRP2A62 KRP2A61 KRP2A61 KRP2A62 KRP2A61
electrical appendices (1)
Wiring adaptor for
6-2 KRP4AA51 KRP4AA51 KRP4AA52 KRP4AA51 KRP4AA51 — KRP4AA51
electrical appendices (2)
Remote sensor
7 KRCS01-4B KRCS01-1B
(for indoor temperature)
Installation box for adaptor Note 2, 3 Note 2, 3 Note 3 Note 2, 3
8 — — — —
printed circuit board KRP4A98 KRP4A96 KRP1CA93 KRP4AA93
External control adaptor Note 10
9 DTA104A61 DTA104A61 DTA104A62 DTA104A61 DTA104A61 DTA104A61
for outdoor unit DTA104A62
10 Adaptor for multi tenant DTA114A61 — — DTA114A61 — — —
External control adaptor Note 10
11 — —
for cooling / heating KRP6A1
Remote control adaptor
12 — KRCB37-1 —
with key
Drawing No. C: 3D095822B C: 3D060455D C: 3D034600L C: 3D034600L C: 3D023974R C: 4D034581A C: 3D085669H C: 3D034600L
Notes:
1. Installation box (No.8) is necessary for each adaptor marked .
2. Up to 2 adaptors can be fixed for each installation box.
3. Only one installation box can be installed for each indoor unit.
4. Up to 2 installation boxes can be installed for each indoor unit.
5. Installation box (No. 8) is necessary for second adaptor.
6. Installation box (No. 8) is necessary for each adaptor.
7. Individual airflow direction, auto airflow rate and sensing sensor control can be set only via wired remote controller
BRC1E62. Cannot be set via other remote controllers. Available functions depend on the type of indoor unit.
8. Since the control panel is equipped as standard, use the option for 2 remote control system.
9. When using BRC1E62, be sure to remove the control panel and since BRC1E62 cannot be stored inside the
indoor unit, please place it separately.
10.Remove the group control adaptor which is a standard equipment before mounting KRP6A1 and DTA104A62.
KRP6A1 and DTA104A62 cannot be mounted to the same indoor unit at the same time.
Notes:
1. Installation box for adaptor must be obtained locally.
2. For residential use only. Cannot be used with other centralized control equipment.
3. A wiring adaptor (KRP413AB1S) is also required for each indoor unit.
4. No adaptor is required for some indoor units.
25
Notes:
+1. HTTP interface (DCM007A51) is also required.
+2. BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers
(ASHRAE).
+3. LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries.
+4. Installation box for + adaptor must be obtained locally.
Part 9
Guide Specifications
1. Guide Specifications ...........................................................................826
1.1 Indoor Unit............................................................................................826
1.2 Outdoor Unit .........................................................................................826
1.3 Control..................................................................................................826
2. Anti-Corrosion Model (E Type)............................................................827
2.1 Installation atmosphere ........................................................................827
2.2 Specifications of anti-corrosion and standard model............................827
2.3 Important notice....................................................................................827
26
Guide Specifications 825
Guide Specifications EDMT341410C
1. Guide Specifications
Unit is air cooled, split type multi-system air conditioner consisting of plural indoor and outdoor units, having
capability to cool or heat for the requirements of the rooms.
1.3 Control
Indoor unit, BP unit or BS unit, etc. have electronic control device which control refrigerant flow in respond to
required load of the room.
The address of the indoor unit can be set automatically.
In case of centralized control, it can be set with the remote controller.
Unit is equipped with a self-diagnosis for easy and quick maintenance and service.
The LCD (Liquid Crystal Display) remote controller memorizes the malfunction code for easy maintenance.
Various control system are available as option such as iTM, Central Remote Controller, Unified ON / OFF
Controller, etc.. Refer to the chapter of Option of Control for details.
Anti- Where the distance between the outdoor unit and the
E corrosion
type sea shore is more than 300 m and less than 1 km.
Remark:
1. The anti-corrosion specification means the specification which allows the unit to be installed in the atmosphere of sea wind but
not at the location where the sea wind directly blows on the unit.
2. The units with this specification are manufactured by customer’s request on mass production base.
Maintenance precautions
1. Perform maintenance regularly. (Apply a rust proofing agent, such as water repellent grease, wax, etc., at
installation and every 3 months thereafter.)
2. Protect equipment with a cover, etc., during off-season, or other times when it is not to be used for long periods.
26
Guide Specifications 827
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the user's manual carefully before using this product. The user's manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
Specifications, designs and other content appearing in this brochure are current as of June 2016 but subject to change without notice.