Professional Documents
Culture Documents
Bio Metric Authentication System Based On Aadhar Card: 2. Previous Work
Bio Metric Authentication System Based On Aadhar Card: 2. Previous Work
7
International Journal of Pure and Applied Mathematics Special Issue
The main objective is to use the fingerprint image of a Fig. 1. Arduino Mega-Pin Digram
voter to make his/her vote cast securely. A biometric
system is a pattern recognition system that
manipulates by the acquisition of the data of an
individual. The positive recognition is done by the
identifications. The aim is to prevent the identical
identity among the voters.
A biometric system is designed using the following
four main modules.
1) Sensor module: This captures the biometric data.
Example, The finger print data captures the structure
of the finger.
2) Bio metric data is processed to extract features Fig.2. Arduino Mega 2560
3) The captured data is matched with the stored data.
4) Usage of the biometric system to store the biometric
template of the enrolled users.
4. PROPOSED SYSTEM
The main components of the voting system is listed
as follows,
a. Arduino mega 2560
b. Fingerprint Scanner
c. PC
Fig.3. Fingerprint Scanner
d. Power supply
ENROLMENT
Once the voter keeps his finger on the
sensor which is interfaced with the Arduino, the
first function is enrolment. In enrolment when the
fingerprint is correctly interfaced with the
Arduino a message “Ready to enrol a fingerprint.
Please type in the ID you want to enrol” appears
on the screen.
8
International Journal of Pure and Applied Mathematics Special Issue
MATCH
The next function after enrolment is match.
In this function, the fingerprint of the voter is
checked with previously stored fingerprints.
If the fingerprint matches with any of the stored
fingerprints then a message appears on the screen
stating “Waiting for a valid finger”. Fig.8. Recognition of ID
DELETE
If in case a voter is not eligible or migrates
to another country then the ID of that particular
voter can be deled permanently or removed from Fig.9. Display of database
the database. This increases the storage space by
deleting the unwanted ID’s. All this can be done Once the voter details are displayed it
using the delete function. allows automatic voting process. In this a screen
When an unauthorised person casts displaying the parties along with their symbols.
his/her fingerprint on the sensor a message pops The voter is allowed to vote for the desired party.
up on the screen stating that the fingerprint
doesn’t match.
9
International Journal of Pure and Applied Mathematics Special Issue
6. CONCLUSION
The biometric voting system based on
Aadhar card can be used as an alternative for the
traditional voting method. The main objective of
this system is to eliminate bogus voting and vote
repetition, less election expenditure, more
transparency and fast results.
REFERENCES
1. G. Sathya, B. Abinaya, B.Asma, Christina John
and N. Divya,”Smart voting system using Aadhar
card”, Asian journal of applied science and
technology(AJAST), Volume 1, Issue 1, Pages 96-
98, February 2017.
2. G. Sathya, Nikitha S. Paulin, S.Saranya,”Glass
climbing robot for glass wall cleaning”, in
International Educational Scientific Research
Journal, vol 2, issue 12, ISSN:2455-295X,
December 2016.
3. G. Sathya,”Pick and place robot using
accelerometer sensor” in International Journal of
Scientific Research in Science, Engineering and
Technology, vol 2, issue 6, ISSN:2395-1990,
November 2016.
4. G. Sathya, “Intelligent traffic route monitoring
and security safeguard in vehicle automation”,
International Journal of Advanced Research in
Biology engineering science and technology, vol 2,
number 10 pp. 1789-1793, ISSN: 2395-695x,
March 2016.
5. G. Sathya, Nikitha S. Paulin, Boselin Prabhu
S.R., Sophia. S, “Performance Improvement of
Distributed Island Multicasting with Overlay
Data Distribution” Australian Journal of Basic
and Applied Sciences, 9(36) December 2015, Pages
221-228. (ANNEXURE-II)(H INDEX-2).
6.Anandaraj S., Anish R., Devakumar P.V,
“Secured Electronic voting machine using Bio
metric”, IEEE sponsored second International
conference on Innovations in Information,
Embedded and Communication
Systems(ICIIECS)2015.
7.Devendra Vijay Naik, “Smart Wireless
authenticating voting machine”, IEEE ICSCP
2015 Conference.
8.Anooshmita Das, Manash Pratim Dutta,
Subhasish Banerjee, C.T. Bhunia, “Cutting edge
multi stratum secured Electronic voting machine
design with inclusion of bio metrics RFID and
GSM Module”, 2016 IEEE 6th International
Conference on Advanced Computing.
10
11
12