Professional Documents
Culture Documents
Ce7232.2019 - Group4 - Design Criteria PDF
Ce7232.2019 - Group4 - Design Criteria PDF
Materials
Concrete: f’c = 55.2 MPa (Columns and Shear walls), f’c = 41.4 MPa (Beams and Slabs)
Reinforcing steel: fy = 414 MPa.
Design Loads
Gravity Loading Wind Load (WL)
Table 1-1: Gravity Loading Table 1-2: Parameters for Wind Load
Load Case Value Parameters Value
Dead load Self-weight Wind Speed 150 mph
Superimposed dead load 3 kPa Exposure Type B
Live load 1.92 kPa Importance Factor 1
Building Data
Number of stories = 50; Typical story height = 3.1 m
Foundation: Fixed support for columns and pinned support for shear walls at the ground level
Analysis Results
The following analysis results shall be checked and submitted.
1) Mode shapes and time periods of the building
2) Modal participation mass ratios
3) Story drift and displacements for wind and earthquake loads
4) Base shear (in % of total weight of the building (DL+SDL+0.25LL))
Design Results
The following analysis results shall be checked and submitted.
1) Design results of 2 main columns
2) Design results of 2 main beams, if any.
3) Design results of 1 shear wall