Professional Documents
Culture Documents
Detailed Lesson Plan
Detailed Lesson Plan
In
Basic Electronics
I. Objectives:
At the end of the lesson, 75% of the students are able to:
III. Procedure:
Discussion
Let’s go over to our lesson. I will introduce to you the basic
electronic components that we will working out later.
Resistor
An electrical component that limits or regulates the flow
of electrical current in an electronic circuit.
It is a two terminal device have one connection on each
of its sides. Two common resistor symbols are shown in
given figure; one is in American style (zig zag line) and
other is international style.
Transistor
A transistor is a semiconductor device used to amplify
and switch electronic signals and electrical power.
For it to function, there must be a supply of current. So what We must use a battery.
shall we use?
Battery
It has more than a cell and is used for the same purpose.
The smaller terminal is negative and the larger one is
positive. Abbreviated as ‘B’.
Yes, Maam.
Understood, class?
Breadboard,
Also called a proto-board, is a reusable platform for
temporarily built electronic circuits.
Do you understand everything about the breadboard? On The Students answer may vary.
how to use it?
Very Good!
So, for better understanding of the lesson, let’s have a
hands-on activity.
Generalization
Now based on our lesson class, what is the importance of
knowing the functionality of those components? The Students answer may vary.
Having knowledge of the functionality of components,
make it easier to make an electronic circuit without
damaging it.
IV. Evaluation
I. Direction: Fill in the blanks by underlining the word that best completes the statement.
a. ___________ a two-lead semiconductor light source. It is a p–n junction diode, which
emits light when activated. (LED/ LCD)
b. ____________ a semiconductor device used to amplify and switch electronic signals and
electrical power. (AMPLIFIER/TRANSISTOR)
c. ____________ is a resistor whose resistance decreases with increasing incident light
intensity. (LED/ LDR)
d. __________ is an electronic component that oppose the flow of current. (RESISTOR/
TRANSISTOR)
e. ____________________is a reusable platform for temporarily built electronic circuits.
(BREADBOARD/ PHOTOBOARD)
II. Identification
Direction: Identify the ff. schematic symbols. Write your answer on the space provided.
1.
2.
3.
4.
5.
Answer Key:
I.
1. LED
2. Transistor
3. LDR
4. Resistor
5.Breadboard
II.
1. Resistor
2. NPN Transistor
3. LDR
4. LED
5. Battery
V. Assignment
In ¼ sheet of paper answer the ff. questions.
1. What is a parallel circuit?
2. Give an example of circuit problem.
References: Book; Simple Electronics, Fully Illustrated by; Enriquez, Gantalao and Lasala.,
Copyright 2004
Internet (optional)