Professional Documents
Culture Documents
3.0 Results and Analysis
3.0 Results and Analysis
The value of loads from piling details is arranged as follows from low values, medium
and high load values. Based on the values arrangement, the calculation would be easy due to the
classifications of the live load (Q kN) values. Table 1 shown the range of load values for the
design foundation calculations. For our project, the value that we choose for design of foundation
calculations are;
1) Low = 562 Kn
2) Medium = 979 kN
3) High = 1998 kN
0-500 kN
500-1000 kN
1000-1500 kN
1500-2000 kN
Table 2 shown the grouping of loads values in piling layout details based on the drawing
plan “Cadangan Pembinaan Ibu Pejabat Polis Kontijen (IPK) Perlis (Reka Dan Bina)”
Construction.
Table 2: The grouping of loads values in piling layout details based on the drawing plan.
Based on Soil Investigation (SI) Report, the results that needed for design foundation will
considered the important items which are moisture content (%) of soils, bulk density (pb), dry
density (pd), Cohesion soil (C), and friction angle (ᴓ). Table 3 shown the parts of natural
moisture content from SI report for project “Additional Soil Investigation Works for CMS
Mambong New Grinding Piles”.
Table 4: Atterberg Limit Test Results in the Soil Investigation (SI) Reports
1) HIGH
ATTERBERG LIMIT TEST
BS1377 : Part 2 : 1990
Description Very soft dark grey clayey SILT
Sample No: BH21/P4
Type of test Liquid Limit
Mass of container (g) 8.56
Mass of Moisture (g) 9.82
Mass of dry soil (g) 15.08
2) MEDIUM
ATTERBERG LIMIT TEST
BS1377 : Part 2 : 1990
Description Very stiff dark grey clayey SILT
Sample No: BH25/P1
Type of test Liquid Limit
Mass of container (g) 8.55
Mass of Moisture (g) 11.71
Mass of dry soil (g) 73.01
3) LOW
ATTERBERG LIMIT TEST
BS1377 : Part 2 : 1990
Description Very stiff dark grey clayey SILT
Sample No: BH26/P1
Type of test Liquid Limit
Mass of container (g) 8.48
Mass of Moisture (g) 12.99
Mass of dry soil (g) 65.28