This document is a list of references used in a paper or report. It includes 18 references ranging from books to technical reports published between 1983 and 2014. The references cover topics like air cooled heat exchangers, process equipment design, process heat transfer principles, and using variable frequency drives to optimize fan energy costs.
This document is a list of references used in a paper or report. It includes 18 references ranging from books to technical reports published between 1983 and 2014. The references cover topics like air cooled heat exchangers, process equipment design, process heat transfer principles, and using variable frequency drives to optimize fan energy costs.
This document is a list of references used in a paper or report. It includes 18 references ranging from books to technical reports published between 1983 and 2014. The references cover topics like air cooled heat exchangers, process equipment design, process heat transfer principles, and using variable frequency drives to optimize fan energy costs.
Amercool Manufacturing Inc, “Basics of Air Cooled Heat Exchanger”,
Oklahoma, 2000. Branan, Carl R., “Rules of Thumb for Chemical Engineers, 5thEdition”, Buuterworth-Heinemann, Oxford, 2012. Gas Processors Suppliers Association, “Engineering Data Book”, FPS Version Vol. I&II, Oklahoma, 2004. Giammaruti, Robert, “Performance Improvement to Existing Air-Cooled Heat Exchangers”, Cooling Technology Institute, Hudson Products Corporation, Texas, 2004. Hewitt, G. F.; Shires, G. L.; Bott, T. R., “Process Heat Transfer” CRC Press Inc., Michigan, 1994. JOB Pertamina – Talisman Jambi Merang dan PT. Tripatra Engineers dan Construcors, “Process Data Sheet for Regeneration Gas Cooler (SK-30-E-01) Rev. 0”, 2009. JOB Pertamina – Talisman Jambi Merang dan PT. Tripatra Engineers dan Construcors. Mechanical Data Sheet for Regeneration Gas Cooler (SK-30-E-01) Rev. 10. 2010. Kern, Donald Q., “Process Heat Transfer”, McGraw Hill, Tokyo, 1983. Kroger, Detlev, G. “Air-Cooled Heat Exchengers and Cooling Towers: Thermal- flow Performance Evaluation and Design, Vol. II”, PennWell, Oklahoma, 2004. Monroe, Robert C., “Minimizing Fan Energy Costs”, Hudson Products Corporation, Houston, Texas, 1993. Perry, Robert H.; Green, Don W., “Perry‘s Chemical Engineers’ Handbook, 8th Edition” McGraw Hill, New York, 2008. Serth, Robert W., “Process Heat Transfer: Priciples and Applications”, Elsevier, Oxford, 2007. Sinnot, R. K., “Coulson & Richardson Chemical Engineering Series: Chemical Engineering Design, 4th Edition, Vol. 6” Elsevier Butterworth- Heinemann, Oxford, 2005. Walas, Stanley M., “Chemical Process Equipment: Selection and Design” Butterworth-Heinemann, Washington, 1990. Younger, A. H., “Natural Gas Processing Principles and Technology – Part I”, Thimm Engineering Inc., Alberta, 3004. Yorkland Controls Ltd. Environmental Solutions, “Application Guide – Variable Frequency Drives in Retrofit Applications”, Toronto, 2014.