Professional Documents
Culture Documents
Culata
Culata
Culata
Page 1 of 3
Cerrar SIS
Pantalla anterior
Especificaciones
C2.2 Engines for Caterpillar Built Machines
Número de medio -KENR6946-02 Fecha de publicación -01/06/2015 Fecha de actualización -19/06/2015
i05422509
Cylinder Head
SMCS - 1100
S/N - -
Illustration 1 g00819698
The dowel pins in the cylinder block hold the cylinder head gasket in the correct position when the
cylinder head is installed.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/12/2018
232B2 Skid Steer Loader SCH02475-UP (MACHINE) POWERED BY 3024C Engine(S... Page 2 of 3
Table 1
Selection of Head Gasket for the C2.2 Engine
Piston Height Above Top Face of Cylinder Block Gasket Thickness
(3) The stamped marking on the cylinder head gasket must face upward. This ensures that the cylinder
head gasket is installed correctly.
Illustration 2 g01309552
Use the following procedure in order to tighten the bolts for the cylinder head.
1. Put clean engine oil on the threads of the bolts. The bolts are tightened in the numerical
sequence that is shown in Illustration 2.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/12/2018
232B2 Skid Steer Loader SCH02475-UP (MACHINE) POWERED BY 3024C Engine(S... Page 3 of 3
2. Repeat the procedure in step 1 to ensure that all of the bolts are tightened to the correct torque.
Illustration 3 g00900977
Typical example
Distortion of the cylinder head ... 0.00 to 0.05 mm (0.000 to 0.002 inch)
Note: Use a straight edge and a feeler gauge to check the six positions for distortion.
Refer to Systems Operation, Testing and Adjusting, "Cylinder Head - Inspect" for the procedures for
measuring the cylinder head.
Note: If the cylinder head has been machined, check the valve depth below the cylinder head face.
Refer to Specifications, "Cylinder Head Valves" for valve depth.
Copyright 1993 - 2018 Caterpillar Inc. Sun Dec 9 20:17:38 CST 2018
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/12/2018