Professional Documents
Culture Documents
Capture HRDFEP v5
Capture HRDFEP v5
Kongsberg Spacetec AS
� �
Get all data right from the start of every satellite contact Reliability
Make acquired data available for end users as fast as Reduce your operations cost by automated operations
possible • Fully automated operations
• Automatic recovery in case of network problems
Performance • Automated storage management, using RAID,
• Low implementation loss: 0.1 – 1 dB, typically <0,5 dB • Hot swap disks
• Conventional modulations and coding • Dual power supplies, hot swappable
• SCCC • Monitoring of HW resources
© Kongsberg Spacetec AS - MEOS-PA-KSPT-HRDFEP-1673, Issue/revision 1/2, July 2018
8PSK 0.3 0.3 0.4 0.5 • State of the art FPGA based hardware re-programmable
and in-field upgradable. New versions and updates are
16QAM 0.3 0.3 0.4 0.5 provided as files
SCCC <1 dB <1 dB <1 dB <1 dB <1 dB
Measurements performed with Arbitrary Waveform Generator (AWG) transmitter: BER vs SNR
Two versions
KONGSBERG SPACETEC AS
Prestvannveien 38 P.O.B. 6244 NO-9292 Tromsø NORWAY
Phone: +47 77 66 08 00 Email: marketing@spacetec.no www.spacetec.no
MEOS™ Capture HRDFEP v5 3
Technical Specification
Demodulator (HRD)
Quality and Time Appending
• Fully programmable wideband digital demodulator for BPSK,
xQPSK, 8PSK, 16QAM, SCCC**, DVB-S2** Frame sync status:
• Dual input ports – female SMA connectors • Up to 4 bytes appended to the frames
• 720, 1200MHz (tunable within 700 MHz bandwidth) • Reed-Solomon status:
• Input impedance: 50 ohms • Up to 32 bytes appended to the frames (including frame
counter, error status, and user defined fields)
• VSWR: < 1.5
Time-stamping - 8 bytes time field:
• AGC range: -5 dBm to –50 dBm
• Day; millisec of day; microsec. of millisec
• AGC output level: 0 – 10V - female SMA connector
Mission specific
• Demodulation type:
- BPSK, CBPSK, QPSK, OQPSK, 1/2 UQPSK, 1/4 UQPSK, • EVCDU, EAP
- 1/8 UQPSK, 8PSK, 16QAM, SCCC*, DVB-S2* • Sentinels, SMOS, ADM, SWARM etc.
• Matched filters: SRRC, Integrate & Dump
Processing
• Adaptive Equalizer
• Splitting and sorting of VCDUs
• Spectrum inversion correction
• Instrument Source Packet (ISP) service processing
• Fast, wideband carrier acquisition (up to +/- 100 MHz range)
• Supports part of the CCSDS AOS Path, Internet and
• Doppler on Carrier: 1500 kHz
Encapsulation services
• Max Carrier Doppler rate: 100 kHz/s max
• CFDP: CCSDS File Delivery Protocol, Class 1 & 2.
• Reference oscillator input 10 MHz
• Trellis Decoding 4D-TCM: • Near Real Time (NRT) distribution via TCP socket with rate
- Rate: 8/12, 5/6 (10/12), 9/12 control. Supports compression, encryption, XML meta data
and checksums
• Viterbi decoding:
• Post-pass file transfer protocols: FTP, SFTP
- CCSDS compliant Viterbi polynomial
• SLE: CCSDS Space Link Extension, RAF, RCF and FTPS
- Rate 1/2, 3/4, 2/3, 5/6, 7/8
-7 bits constraint length • CFDP: Class 1 and Class 2
-Viterbi BER estimation
Special Features
Forward Error Correction and Detection: • BER tester: four selectable standard polynomials
• R-S (10, 6), R-S (255, 239), R-S (255, 223) • Frame data pattern generator
Codeword interleaving: 1 to 16
• PN generator: four selectable standard polynomials
Codeword length: 33 to 255
Filtering of uncorrectable frames • Status report file generation
• LDPC 7/8
• LDPC DVB-S2**
• SCCC Turbo codes** Automatic Storage Management
• Oldest data stored on disk will automatically be purged if
space is needed
• Important data can be manually locked
* optional compact
** optional Max
KONGSBERG SPACETEC AS
Prestvannveien 38 P.O.B. 6244 NO-9292 Tromsø NORWAY
Phone: +47 77 66 08 00 Email: marketing@spacetec.no www.spacetec.no
MEOS™ Capture HRDFEP v5 4
Graphical User Interface
External Interface
• TCP socket and XML based
• external interface with minimal
• bandwidth usage
• Access authentication
• MEOS™ Connect ready
Reporting
• Historical view of qualitative and quantitative status
information for previous activities, based on satellite and
orbit. Both as numeric values and graphs
• Automatic generation of WEB reports, including quality
and quantitative status information, plots, events and This configuration supports two independent IF and ECL
data analysis. Available through standard WEB browser input channels, four independent front-end processors
(two per channel) and four independent reconstructions
Automatic Commanding (two per channel) of Instrument Source Packets (ISPs). It
also supports wo independent online distribution channels
This feature is based on orbit prediction for user selected
and three independent offline distribution channels. This
missions. Candidate list of satellite missions to receive and
configuration also supports two ECL output channels.
process is generated automatically. The list is editable by the
operator.
V5 Compact V5 MAX
Rack mountable standard standard
chassis
Height x Width x 9,5 x 48,26 x 73,22 21,8 x 48,26 x 73,22
© Kongsberg Spacetec AS - MEOS-PA-KSPT-HRDFEP-1673, Issue/revision 1/2, July 2018
Depth in cm:
Weight: appr. 24 kg appr. 40 kg
Power: 100-240 volts, 100-240 volts,
50-60 Hz 50-60 Hz
500W 500W
Typical power con- < 500W <700W
sumption
Power supplies: Dual Dual
Temperature 10°C to 35°C 10°C to 35°C
Data driven operations operating
The HRDFEP detects the satellite mission automatically from Temperature non- -30°C to 60°C -30°C to 60°C
operating
the input (IF) spectrum charateristics and from analysis of
Relative Humidity 10-90% 10-90%
the spacecraft ID in the received data. Reception, processing
operating
and distribution configuration are preconfigured permission
Relative Humidity 5-95% 5-95%
and applied automatically. non operating
KVB Option Option
Physical
KONGSBERG SPACETEC AS
Prestvannveien 38 P.O.B. 6244 NO-9292 Tromsø NORWAY
Phone: +47 77 66 08 00 Email: marketing@spacetec.no www.spacetec.no