Professional Documents
Culture Documents
4200 Roadm Ds
4200 Roadm Ds
4200 Roadm Ds
••
•
•
••
••
•
•••
Port 1
•••
•••
Port 2 Port 9
Port 3 Port 8
D Datasheet
The nine-port, Wavelength Selectable Switch (WSS)-based automatically adjusts optical power levels for add/drop
DWR module performs the primary multi-degree optical and express traffic. To achieve power equalization across all
switching functionality at each ROADM node. Each DWR wavelengths, each ROADM node requires one OCM module
module contains a WSS capable of dynamically adding, (OCM-8) to monitor the optical power levels of up to 44
dropping, or expressing any of 44 wavelengths to any of different wavelengths on eight inputs.
nine ports, in any combination, and can support 10G and
40G wavelengths simultaneously. The OAV-VS-U-C is a variable gain amplifier typically used
as the receiving amplifier to offset fiber loss in the preceding
The DWR module also incorporates a passive wavelength span. The OAV-VS-U-C uses SmartGain™ dynamic gain control,
combiner that can add or multiplex optical signals from up transient suppression and auto span loss compensation, and
to nine tributary ports into an aggregate signal. provides mid-stage access for dispersion compensation.
Network reconfiguration using the DWR module allows The OAF-BC-B is a booster-combiner amplifier that produces
flexible, remote provisioning of any demand, and simplifies a fixed gain of 20.5 dB on the incoming Dense Wavelength
network planning by safeguarding upgrade capacity and Division Multiplexing (DWDM) signal.
extending network life—resulting in operational and capital
savings and faster revenue capture. The booster acts as an aggregation point for multiple degrees
and add/drops, with the capability to support two local add
In addition to remotely provisioned Add/Drop routing, DWR modules. Each OAF-BC-B supports four degrees and
4200 ROADM supports automatic optical power control, which is expandable to eight degrees.
Technical Information
System Requirements 4200 RS shelf with Node Controller module; Software release 5.0 or later; DWR module;
OCM-8 module; OAV-VS-U-C amplifier; OAF-BC-B amplifier
Optical Ports 1 duplex network 4. full duplex 4 fixed ports for net- 7. full duplex
port and 9 duplex work, node, DCM (6 inputs, 1 output)
tributary ports and OCM or test
input/output
Port Format LC LC LC LC
Input Power Range N/A N/A -24.6 dBM to -0.6 -21.5 dBm to 3.5
dBm dBm
Gain Range N/A N/A 17-22 dB within the Fixed gain of 20.5 dB
C-band (35 nm) within the C-band
(35 nm)
2
Technical Information continued
DWR OCM-8 OAV-VS-U-C OAF-BC-B
Network Management and Control 2 RJ-45 10/100 BaseT N/A 2 RJ-45 10/100 BaseT NC port (for
management MGMT ports connectivity to Node
(MGMT ports) Controller modele)
1 RJ-45 RS-232
1 RJ-45 RS-232 (CNSL) port
console
console (CNSL) port 2 Uplink 100/1000
BaseT (for
connectivity to
Node Controller
Module)
Agnecy Aprovals
ETSI/CE ETS 300 019/IEC 68, EN 300 386/EN 55022, EN 61000, ETS 300 753, EN 60950
NEBS Level 3 GR-63, GR-1089
Safety Listed to UL 60950-1, 3rd Edition; Certified to CSA C22.2 No. 60950-1 3rd Edition; FCC,
Subpart B, Part 15, Class A; Industry Canada ICES-0003, Class A
Power Requirements 45 W 70 W 50 W 35 W
Environmental Characteristics
Operating Temperature +5° C to +50° C (+41° F to +122° F); -5° C to +55° (+23° F to +131° F) C short term
Relative Humidity 5% to 85% (non-condensing)
Altitude 13,000 ft; 4000 m
Physical Characteristics
Height 15.02 in (382 mm) 15.02 in (382 mm) 10.94 in (278 mm) 10.94 in (278 mm)
Width 1.96 in (50 mm) .98 in (25 mm) .98 in (25 mm) .98 in (25 mm)
Depth 9.63 in (245 mm) 9.63 in (245 mm) 9.63 in (245 mm) 9.63 in (245 mm)
Weight 4 lbs; (1.81 kg) 2 lbs (.91 kg) 2.9 lbs (.85 kg) 1.8 lb (.82 kg)
Ciena may from time to time make changes to the products or specifications contained herein without notice. Copyright © 2011 Ciena® Corporation. All rights reserved. DS122 8.2011