Professional Documents
Culture Documents
Questions - Presentation
Questions - Presentation
Questions - Presentation
Q8. Type of scanner to be used and required area of inspection for the same
Q10. Origin marking on the joints. To have a common origin so that data can be compared
later on
Q11. Inspection at T-Sections
Q12. Scan Plan and Analysis Software used? Is analysis done at site or in a remote location?
Q13. How many number scans required for complete area coverage.
Q14. Operator shall ensure that there is no coupling loss and no missing lines?
Q15. Area required for scanner movement. Length of weld flush required at T-Sections.
Q18. Possibility of working along with construction i.e., effect of vibration / noise / welding
Q19. Technique to identify type of defect. As LOF is not acceptable defects has to be
categorized and cross-verification is required.