Page 1 (No, of pages:- 3 )
VALVE con V4 5
Specification: GPO/CVv450/Issue 4 SBOURITY
Dated: Feb, 1954 Specification Valve
To be read in conjunction with K 1001 + Unclassified Unclassified
——> indicates a change
TYPE OF VALVE: output pentode MARKING
CATHODE: See Ki001/4
ENVELOPR. Glass unmetaliised
O70" Las
RagING Nove. CONNEXIONS.
a Blectrods
Heater voltage : ww] es - ——— 4
Heater current Cy) ae 1 a3
Max. anode voltage ()} 800 2 Heater
Max. screen voltage (vi 400 3 No connexion
yutusl conductance (ravages [oa : a
>| Max, anode dissipation on} as : a
| max. screen dissipation Gol 6
8 in Omitted
7 Heater
8 Cathode
1 Anode
See K1001/A1/D2
Dimension. min | max
aCe) - | aan
(nn) = 54
TOP CAP
e K4002/A2/D8.2
vores.
1, Measured with Ya = 250 volts, Vgi =~ 7 volts & Vg2 = 260 volts
2,5548.R.
evas0/4/2CV450 mau mee
To be performed in addition to those applicable in K1001
‘Test Conditions inits | No.
Test Note|
va | va | ve2 | ver win. | Max. |rested
ajea] a5 (nay | ass | = | toow | a
v |s.s | 250 Ia (mA) | 28 | 205 | 1008
e }e.3 | 280 | 250 | -10 [ra (na) | 42 | 92 | 1008
a}e.a| 250} 280 | -20 {te (ma} = | 7 | 2008
e |¢.3 | 280 | 280 Reverse Igl quar] = | 2} too8 | 2
g]e.a | 250 | 260 | -45 [re war} - | 20 | 100% | 2
a] o8 ° Adjust| Reverse T¢2 (war} = | 750 | s00% | 4
B or 8.
tes i. Collecting voltage 95V at 50 o/s.
2. 0,1 megohms protective resistance in series.
3, 1,0 megohna protective resistance in series.
4, Using cireult on Page 3, adjust Vg 1 until meter M2 reads 34 mA,
The screen dissipation is then 9 watts. Meter M3 indicates the
reverse I¢2.
cvaso/4/2CV 450 maces
a3
VALVE
D1 +Ige UNDER Test
Mi = AC VOLTMETER (CALIBRATED RMS.)
Ma= AC CURRENT METER (RMS READING)
M3= 0c CURRENT METER (MOVING-coIL)
Ot sumiaus nua cara DES
evaso/a/3